Used Dowel Inserting Machine for sale (64,501)

Condition: used, Year of construction: 1998, machine/vehicle number: 24124, Kuvertiermaschine / Envelope Inserting Machine Bell + Howell Vitesse BH900 C5 Year 1998 6 Beilagenstationen / 6 Supplement stations Briefwender-Rollenauswurf / Letter turner-roll ejector verarbeitet Briefumschlagformat von C6 bis C5 / processes envelope format from C6 to C5 Geschwindigkeit mechanisch max. 10.000 Takte/Std. / Speed max. 10.000 cycle/h Online-Video-Inspection by Skype-Video Ffjdoupy Tajpfx Afnsu We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 2907000, Kuvertiermaschine / Inserting machine Fracotyp-Postalia FPi4530Serial-No. 10EY5510 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Ffsdpfx Ajmkninsfneu

Year of construction: 1977, condition: ready for operation (used), Precision dowel boring machine. Pneumatic clamping, 2 drilling units, swivelling (0-90 degrees). Working width approx. 1200mm. Inspection possible by appointment. Fjdpfx Aox Ecu Sofnsfu

Condition: like new (used), Year of construction: 1997, functionality: fully functional, Dowel and mortise drilling machine HOFFMANN HR 150 Very good condition, as new. The machine comes from an installation company and shows virtually no signs of use—absolutely like new. It was only used for minor modification work and is now being sold because it has been idle for the last few years. With this machine, you can mill mortises and drill dowel holes on two levels without reclamping. Supplied with documentation. - 380V, 1500W - 2840 RPM - Year of manufacture: 1997 With the machine, you can mill mortises for lock cases and similar applications, create all types of frame dowel joints at right angles, butt joints, and miters. Ideally suited for dowel joint production in timber frame construction, furniture, door, window, and staircase manufacturing, as well as similar uses. Thanks to two-level drilling, indexing stops, and machine design, dowel joints can be produced in the shortest time possible, making the machine highly economical. Requires 6 bar compressed air connection (very low air consumption). - Right-hand rotation - Mills and drills precisely and cleanly - Fitted with mobile base - Two stops left and right on the machine table; an additional 45° miter stop is included - Two fold-out workpiece supports - Comes with 3 drill chucks: for drills with a 16 mm or 12 mm shank, and for drills with M10 thread - Workpiece clamping is achieved with two pneumatic cylinders operated via foot pedal, allowing you to hold the workpiece with both hands - Height adjustment between drilling levels is also pneumatic; the control switch is positioned at the adjustment lever for the indexing rail, ensuring quick changeover between indexing positions and drilling levels - Equipped with a precision 12 mm indexing rail with a center position and 13 stops left and right - Both drilling levels feature highly accurate counters, allowing for quick, easy, and precise setting of each drilling level height - Can also be used as a mortise drilling machine, with two adjustable stops left and right, providing up to 500 mm of lateral travel - The machine features a fence at the front of the table, height-adjustable as needed - Max hole height approx. 100 mm - Max drilling depth approx. 150 mm, with depth stop Fodpsyhziljfx Afnjfu - Max workpiece height approx. 250 mm - All functions operate perfectly The machine can be personally delivered and demonstrated anywhere in Germany for 220.00 EUR, so you take no risk with your purchase. Delivery to Austria, Switzerland, and the rest of Europe is also possible. Machine table is 1,100 mm wide and 250 mm deep Professional-grade machine, not DIY store quality Ready for immediate use Very robust and durable construction Precision guides with play-free ball bearing bushings are in perfect working order and move smoothly Very stable and torsion-resistant design

Condition: not inspected (used), functionality: unexamined, Very nice folding inserting machine. Brand Pitney Bowes, type DI-600. Ffodpfexdk A Iox Afnju With 4 sheet feeders, 1 envelope feeder, 1 manual feeder, and 1 insert feeder. Speed up to 4,000 per hour. Of course, you are welcome to test this machine with us. We can arrange transport/packaging for you and load it into a truck or container. Request a price including transport (location: The Netherlands). Regards, Henk Hoos.

Condition: used, Year of construction: 1989, functionality: fully functional, Stegherr Type FD, a boring machine for dowel holes in window frames — designed for precise drilling of dowel holes in wooden window profiles. Professional FP machine for milling, drilling, and processing of wooden frames, windows, and doors. Fsdpfx Afjya Alzensfu Very robust German quality Suitable for precision work (corner joints, dowel holes, etc.) Convenient stops and adjustment options Fully operational. Sturdy metal housing Ideal for joinery workshops or woodworkers seeking accurate results. In used condition.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used Francotyp FPi 2700 inserting machine. Item for sale: 1 x Francotyp FPi 2700 with the following features: Includes Maxi Feeder Includes Stacker Meter readings: Fedpfxex Svuus Afnefu Total: Approx. 97,645 pages Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test printout can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: used, Year of construction: 1980, Number of drill spindles: 23 Pitch: 32 mm Drill bit holder: Screw-in thread Operation: Foot pedal Drilling direction: From above and from the front Swivel: Pneumatic Maximum throughput width: 720 mm Number of material clamps: 2 Type of material clamping: Pneumatic Design: Mobile Stop system: For hole line and construction line Dimensions: 1300 x 1200 x 1700 mm Approx. weight: 365 kg Motor power: 2.2 kW Fsdpfx Aowkir Dofnjfu Storage location: Nattheim

Condition: used, Dowel drilling machine, dowel drilling machine, drilling and dowel station, row of holes dowel drilling machine, knothole drilling machine, row drilling machine, drilling beam, multi-spindle drilling head, articulated multi-spindle head, row drilling machine, dowel drilling head, dowel drilling machine, drilling gear -Drive: 1.5 / 2.0 kW -Drill speed: 2200/4400 rpm -pneumatic workpiece clamping -15 drill bits from below, grid 32 mm -Bore head: swiveling -Foot switch -Bore depth: max. 185 mm -Height adjustment: max. Mm Fsdpfx Afocuh D Ronefu -Max. Clamping height: 110 mm -Dimensions: 950/1100 / H1350 mm -Weight: 616 kg

Condition: used, Dowel drilling machine, dowel drilling machine, drilling and dowel station, row of holes dowel drilling machine, knothole drilling machine, row drilling machine, drilling beam, multi-spindle drilling head, articulated multi-spindle head, row drilling machine, dowel drilling head, dowel drilling machine, drilling gear -Workpiece clamping; pneumatic -Number of drills: 21 pieces. 32 mm grid -Bore head: swiveling -Bore depth: max. 80 mm -Height adjustment: max. 80 mm -Underframe: transport castors that can be steered on 4 pieces -Dimensions: 1090/1330 / H1460 mm -Weight: 433 kg Fodpfx Afof Dluronsfu

Condition: used, Year of construction: 2022, New exhibition machine! List price: 14,200.- 400V, 3Ph, 50Hz / 1.5 kW Complete in standard configuration with: - Fully automatic electronic control with impulse operation via foot pedal: Clamping-Drilling-Unclamping, electric automatic return of the drilling unit after reaching the preset drill depth - Automatic drill hole depth extension for end-grain drilling, eliminating the need to reset the drill depth when switching from flat to end-grain drilling (+10 mm, e.g., for dowel length 35 mm, flat drilling depth 14 mm, end drilling depth 24 mm) - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm) - Including 21 quick-change chucks (Ganner system) for easy tool changes - Simple swiveling of the drilling unit from 0° to 90°, assisted by gas cylinder - 1 clamp carrier, adjustable in Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm Ffodpfx Afoqw Ek Ijnou Complete stop system consisting of: - 1 stop ruler 1800 mm for shelf drilling (aluminum profile 40x40 mm) with 3 drop stops; quick-change system easily switchable from right to left stop side for mirror drilling of shelves in cabinet constructions; usable also for hole line drilling in the 32 mm system - End stops and position settings, as well as drilling height positioning via support table with mechanical digital display - End stops can be easily swiveled away for quick conversion from cabinet to frame and vice versa - Support arms for clamp carrier made for hole-line positioning up to max. 300 mm Ideal three-stage tooling system. 1 set of dowel drills: 5 carbide dowel drills Ø 8x77 mm, right / 4 carbide dowel drills Ø 8x77 mm, left Additional equipment: - Extraction funnel, dust-tested, Ø 120 mm - Set for line boring in the 32 mm system, complete with: 2 guides with scale and adapter for positions up to max. 300 mm; 2 pairs of stop cams for line boring at Y-positions 37 mm and e.g. 300 mm; 1 basic ruler 1000 mm (aluminum profile 40x40 mm); 1 setting gauge for line boring - 1 set of drills: 11 carbide hole-line drills Ø 5x57 mm, right; 10 carbide hole-line drills Ø 5x57 mm, left - Hydraulic brake cylinder - Clamping cylinder with holder, additional Storage location:

Year of construction: 2025, operating hours: 25 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: P1S10_23, Electric pressing machine P1S-10 of the PRESSONE series by CoastOne from Finland with spindle drive. PressOne P1S-10 100kN pressing force 120mm/s feed speed Ffedpfxox Atvuj Afnsu 200mm/s opening speed Tool carousel for 4 lower tools Tool case with 22 pressing tools Laser pointer Work light Side holder with color boxes TC12 touchscreen control 36 month guarantee

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: P1S5_16, PressOne P1S-5 is a press-in machine from Finland, which is driven by a ball screw with a servo motor. That gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no hassle when changing the oil and no filtration problems. Pure power, accuracy and speed! Technical data: P1S-5 Main press technology: ball screw with AC servo drive Maximum pressing force: 50 kN Repeatability of force setting: ± 1% Maximum opening / approach speed: 120 mm / s Press speed: max 10 mm / s Throat: 470 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 touchscreen 12 " Tool connection: Type PressOne Universal, 4-fold lower swivel base * The maximum approach speed requires the "Fast approach speed" option. Control features of the P1S TC12: - Programmable press force Fjdpfx Asx Atwlofnofu - Programmable lift opening - Programmable pressing speed - Programmable speed change point after starting before pressing - 2-stage cycle (start and press) - Possibility to set the press stroke length in millimeters - Save programs for memory control by name or number - Piece counter, cycle stop after the last press - Material table for material / pressing force - Tool library - FTP server connection

Year of construction: 2025, operating hours: 25 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: P1S10_29, Electric pressing machine P1S-10 of the PRESSONE series by CoastOne from Finland with spindle drive. PressOne P1S-10 100kN pressing force 120mm/s feed speed Fodpswhmq Sefx Afnsfu 200mm/s opening speed Tool carousel for 4 lower tools Tool case with 22 pressing tools Laser pointer Work light Side holder with color boxes TC12 touchscreen control 36 month guarantee

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: P1S5_14, PressOne P1S-5 is a press-in machine from Finland, which is driven by a ball screw with a servo motor. That gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no hassle when changing the oil and no filtration problems. Pure power, accuracy and speed! Technical data: P1S-5 Main press technology: ball screw with AC servo drive Maximum pressing force: 50 kN Repeatability of force setting: ± 1% Maximum opening / approach speed: 120 mm / s Ffedpfx Afsx Atwfoneu Press speed: max 10 mm / s Throat: 470 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 touchscreen 12 " Tool connection: Type PressOne Universal, 4-fold lower swivel base * The maximum approach speed requires the "Fast approach speed" option. Control features of the P1S TC12: - Programmable press force - Programmable lift opening - Programmable pressing speed - Programmable speed change point after starting before pressing - 2-stage cycle (start and press) - Possibility to set the press stroke length in millimeters - Save programs for memory control by name or number - Piece counter, cycle stop after the last press - Material table for material / pressing force - Tool library - FTP server connection

Year of construction: 2025, operating hours: 25 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: P1S10_24, Electric pressing machine P1S-10 of the PRESSONE series by CoastOne from Finland with spindle drive. PressOne P1S-10 100kN pressing force 120mm/s feed speed 200mm/s opening speed Tool carousel for 4 lower tools Tool case with 22 pressing tools Laser pointer Fedpfxjx Atxie Afnsfu Work light Side holder with color boxes TC12 touchscreen control 36 month guarantee

Year of construction: 2025, operating hours: 25 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: P1S10_27_1, PressOne P1S-10 is a press-in machine from Finland, which is driven by a ball screw with a servo motor. That gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no hassle when changing the oil and no filtration problems. Pure power, accuracy and speed! Technical data: P1S-10 Main press technology: ball screw with AC servo drive Maximum pressing force: 100 kN Repeatability of force setting: ± 1% Maximum opening / approach speed: * 120 mm / s Press speed: max 10 mm / s Throat: 620 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 5 kW Control: P1S TC12 touchscreen 12 " Tool connection: Type PressOne Universal, 4-fold lower swivel base * The maximum approach speed requires the "Fast approach speed" option. Control features of the P1S TC12: - Programmable press force - Programmable lift opening - Programmable pressing speed - Programmable speed change point after starting before pressing - 2-stage cycle (start and press) - Possibility to set the press stroke length in millimeters - Save programs for memory control by name or number Ffodpfxox Atuqe Afnsu - Piece counter, cycle stop after the last press - Material table for material / pressing force - Tool library - FTP server connection

Year of construction: 2025, operating hours: 25 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: P1S10_33, Electric pressing machine P1S-10 of the PRESSONE series by CoastOne from Finland with spindle drive. PressOne P1S-10 100kN pressing force Ffedpfx Afsx Atvhenou 120mm/s feed speed 200mm/s opening speed Tool carousel for 4 lower tools Tool case with 22 pressing tools Side holder with color boxes TC12 touchscreen control 36 month guarantee

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Ffedpfx Afoxwaz Henju

Condition: used, Year of construction: 2024, Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard configuration, equipped with: Fedpfsxnlflsx Afnefu - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release sequence, including electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic drilling depth extension for end-face drilling. This saves the need to adjust the drilling depth when switching from flat-face to end-face drilling (+10 mm, e.g., with dowel length 35 mm, flat-face drilling depth 14 mm, end-face drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit changeover. - Easy pivoting of the drilling unit from 0° to 90°, assisted by gas cylinders. - 1 clamping beam movable on Y-axis with 3 pneumatic clamping cylinders, for workpieces up to max. 80 mm height. Ideal fence system consisting of: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops. - Quick-change system, easily switchable from right to left stop for mirrored drilling of shelves in carcass construction; also suitable for line boring in system 32. - Side stops and position adjustments, as well as drilling height position, via mechanical digital counters on the support table. - Side stops can be easily folded away for fastest set-up change from carcass to frame or line drilling. - Clamping arms for the clamping beam enable line boring positions up to max. 300 mm. - Optimized three-stage tool system. Includes 1 set of dowel drill bits: - 5 carbide dowel bits, Ø 8x77 mm, right - 4 carbide dowel bits, Ø 8x77 mm, left Basic machine Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard version, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release, electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic extension of drilling depth for end drilling saves the need to adjust depth when switching from flat to end drilling (+10 mm, e.g. for dowel length 35 mm, flat-side depth 14 mm and end-side depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill changeover. - Easy pivoting of the drilling unit from 0° to 90°, gas spring assisted. - 1 clamping beam, Y-axis adjustable, with 3 pneumatic clamps for workpieces up to max. 80 mm high. - Ideal stop system comprising: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, quick-change system, easily switched from right to left for mirrored shelf drilling in carcass constructions, also usable for line boring in system 32. - Side stops and adjustable positions, as well as drill height position, via mechanical digital counters on the support table. - Side stops can be folded away easily for shortest retool time from carcass to frame and line boring operations. - Clamping arms for the clamp beam suitable for line-boring positions up to max. 300 mm. - Three-stage optimized tool system. Extraction funnel, dust tested, Ø 120 mm 1 set for line boring in system.

Condition: excellent (used), Year of construction: 1982, with 2 drilling beams Used, good condition Make Scheer Type DB 3 Year of construction 1982 Machine no. 73021 Number of spindles: 25 Number of drill beams: 2 Spindle spacing/grid: 32 mm Drilling from above Hydraulic feed brakes: 2 Linear stop: 1 approx. 2500 mm Working width: approx. 800 mm (768 mm) Drilling depth: approx. 100 mm stroke Drill chuck: M 10 Pendulum stops: 3 Fodpfx Afov Trlmonjfu Clamps: 3 Drill programs: 4 Space required: approx. 1400 mm x 1300 mm x 1800 mm Weight: approx. 1000 kg Location: Arrives at the end of April at warehouse 54634 Bitburg - free on freight - Handed over in the current condition, as seen, without overhaul, without warranty or guarantee

Condition: like new (used), Year of construction: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration as per price list 01/22/D with: - Precision collet chuck for ER 40 collets Ø 3–26 mm, including collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic 2-level positioning adjustment (0–100 mm) Fsdpjxdttiefx Afnjfu - Max. drilling depth: 150 mm - Precision indexing rail with 12 mm pitch, featuring: - Center detent and lateral adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete fence system consisting of: • 1 center stop and 1 stop for oversized frames • 1 round stop bar approx. 850 mm long (can be mirrored from left to right) • 2 flip stops - Tiltable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) - Extraction hood Ø 80 mm, dust-tested - Central mitre stop 45° - Pair of auxiliary workpiece supports, pivotable (left and right) - Drill head holder - 3-spindle drilling head, 32 mm pitch (can be rotated 90°) - Chassis with 4 wheels for easy machine movement Availability: Short-term – immediately –

Condition: new, Year of construction: 2025, CNC-controlled drilling, gluing, and dowel insertion machine Complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal drilling unit, motor 0.65 kW, stroke 70 mm Tool speed selectable via operator software (3000/5000/8000 rpm) 1 pc. blow-out, gluing, and dowel insertion station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 700 mm, max. traversing speed 95 m/min - Z-axis manually adjustable via mechanical digital counter, position on support table 5–40 mm - Dowel insertion projection adjustable from 7–20 mm via mechanical digital counter, drilling depth 0–35 mm (with drill length TL 70 mm), automatically set with insertion projection - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with viscosity from 150 to 350 mPas Fodew Sgm Hopfx Afnofu - Glue quantity steplessly adjustable via operator software - Selector switch GLUE/WATER to flush glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 l water - Indicator lamp for residual glue level in glue container - 1 pc. left side stop, 1 pc. right side stop (all removable) - 2 pcs. start buttons for individual operation with 1–2 workpieces - 2 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm - 1 pc. TCT controller with: Integrated industrial PC, incl. Beckhoff TwinCAT soft PLC, operating temperature range 0–50°C, 15" capacitive touchscreen TFT industrial display, operating system: WINDOWS 10 IoT LTSC (long term support channel) - Programming via menu-guided user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 2 working fields assignable with different programs, graphical workpiece display, parametric programming, zero-point shift, programmable work lists, plain text error diagnosis - Integrated options: - Electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle, art. no. 0470-0810 - 1 EASY CLEAN system, for automatic test glue shots before starting the drilling/gluing/dowel insertion program. E.C.S. for 1 pc. glue nozzle, art. no. 0471-Z010 - 1 single-spindle vertical drilling unit from ABOVE, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjusted via mechanical digital counter Adjustable from 5–40 mm, drilling depth (Z) max. 30 mm (with drill length TL 57 mm) Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g., for Häfele Minifix) Art. No. 0471-0830 - 4 vertical angled clamping cylinders 10° with mount, additional, Art. no. 0470-0850 Available: short notice

Condition: used, Year of construction: 1979, from school operationused, good conditionmake Ayentype DB 1000 K 23year of construction 1979machine no. 7SA740GS-testednumber of spindles 23 piecesnumber of drilling beams 1spindle distance / grid 32 mmdrilling from aboveswiveling pneumatichole line drilling devicestorage location 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without warranty and guarantee Fedpovxr Raofx Afnofu

Condition: used, usedmanufactured by Gannertype Superdrillnumber of spindles 19 piecespindle distance / grid 32 mmhydraulic feeder brakeguide fences 2 piece length ca. 3,0 m / 1,5 mworking width 640 mmdrilling depth 95 mm / 110 mmdrill chuck D 10 mmpendulum fence 6 piececlamp 3 piecedrilling unitframe dowel unitrequired space ca. 1400 mm x 900 mm x 1200 mmtotal connected power 1,5 kWlocated in 97447 Gerolzhofen, free on truck, unpackedsale in current condition as seen,without revisionwithout guarantee and warranty Fsdpjvwf R Refx Afnjfu