Used Double Sided Cantilever Rack for sale (26,280)

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm Dcsdpfxofdkb Uj Am Reh 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth Dcjdpfomhhf Sex Am Rjh - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Screw system in hot-dip galvanized design: Pick-up price: Sturdy steel construction made of IPE profiles Shelf height 3500 mm Dodpsmhhl Hjfx Am Roch Load capacity per upright 2100 kg Foot section 1200 mm usable depth Cantilever arms height-adjustable in 100 mm increments 3 screw-on cantilever arms per upright Usable depth 1200 mm, standard (= 4 levels) Load capacity per cantilever arm 700 kg Including longitudinal and diagonal bracing Including fastening material (without ground anchors) With assembly instructions and load plates C4 according to DIN standard

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) - (*No paint damage!) - (*No damaged components!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 racks in stock) Net price: €1,990.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth Dcjdpomidyfsfx Am Rjh - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery can take place in approx. 1 - 2 weeks after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf uprights, height 3,500 mm with foot parts each 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilevers per upright and 2 foot parts with a depth of 1,200 mm, standard = 4 storage levels one above the other per stand side - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. Dodpfxemkixwo Am Roch The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany Dsdpfxefdkbhe Am Rech - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm Dcedpeqt Dmysfx Am Roh - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Cantilevered construction for long goods. Profiles are made of solid IPE steel. Single-sided rack with 6 supports and 24 arms 6 sets available Price: €5,000 per set Dcjdpfx Ameyu S Afs Rsh Length per arm: 1,500 mm Load per arm (IPE 140): 1,500 kg Load per upright (IPE 270): 6,000 kg

Condition: like new (used), Cantilevered construction for long goods. Profiles are made of solid IPE steel. Double-sided rack with 6 supports and 48 arms 3 sets available Price: €7,500 per set Length per arm: 1,500 mm Load per arm (IPE 140): 1,500 kg Dodpfxoyiat Eo Am Roch Load per upright (IPE 270): 6,000 kg

Condition: used, Year of construction: 2003, Double-sided tenoning machine with automatic feeder Dcsdsxrc Hzspfx Am Rjh Technical Features - Production: Up to 2400 pcs per hour - Produccition: very high outputs (2400 tenons / hour) - Speed of the axles portafresas: rpm 9000 - Max. length of the pins at any inclination: mm 100 + 2R - Max. shank depth with standard tool: mm 40 - Min. Shank depth with standard tool: mm 10 - Maximum spike thickener: mm 25 - Power axle carrier motors (nr. 2 of 4HP): HP 8 - Motors for rotation (N. 2): HP 2 - Motor power right group movement: HP 1

Condition: used, machine/vehicle number: D 395T5, With the NOVA-3 tenoning machine, two rounded tenons of different sizes and inclinations can be produced at both ends of a solid wood part at the same time. The innovative technology of the NOVA-3 makes it the leading double-sided tenoning machine on the market. ROBUST MECHANICS Torsion-free, stress-free annealed steel welded construction, large-dimensioned processing units with supports and slides made of gray cast iron, absolutely vibration-free. Mechanics designed for high operational reliability with the highest production output. Dcodexrpkmjpfx Am Roh USER FRIENDLINESS The new swivel system of the processing units enables short set-up times, in which the position of the tools always remains constant when swiveling around the vertical as well as the horizontal axis, i.e. the swivel point always corresponds to the tool position. Even if the inclination changes, the shoulder length of the workpieces remains the same. FLEXIBILITY NOVA-3 is an extremely versatile processing machine. The large and reliable mechanics, the sophisticated design of the processing units and the innovative swivel system allow both short, heavily deformed workpieces and large parts to be machined with equal precision and high cutting performance. For the latter, the stable machine structure and the performance of the motors are a decisive factor. The flexibility is further underlined by the range of loading magazines; Depending on requirements, the customer can equip his machine with the ADR or APPC automatic loading system. The workpieces are loaded from suitable reference points. The processed parts run out at the bottom of the machine and can therefore be easily removed by the operator, transferred to a conveyor belt or placed in a container. No manual intervention is required for this, the operator only has to load the magazine.

Condition: as good as new (ex-display), Year of construction: 2025, Double side planer (Double Surface Planer ) extra wide 610 mm Maximum working width 610 mm Maximum working height 200 mm Heavy cardan feed system Special spike feedsystem Unlike the conventional chain drive systems, this machine employs a patented synchronized transmission system along the four fitting columns. Electronic height adjustment Dcjdpfxjx Upt As Am Reh Spiral cutterheads top and bottom Latest generation IE-3 motors Spindle and feed brakes CE

Condition: used, machine/vehicle number: 005639, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Corner Rounding Unit: yes Dcedovw Evgopfx Am Rsh Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 3000 mm Max feed speed: 50 m/min Operating Units Right Side: 12 nr Operating Units Left Side: 12 nr

Condition: used, functionality: fully functional, Year of construction: 2015, - Made in Poland - Year of manufacture: 2015 - DTR, CE - Electric saw blade spacing adjustment TECHNICAL SPECIFICATIONS: - Cutting height: 60 mm - Saw blade diameter: 250 - 350 mm - Number of saw blades: 2 pcs - Max. cutting width: 700 mm - Min. cutting width: 90 mm - Max. blade spacing: 460 mm - Feed speed adjustable via inverter - Feed speed range: 0 - 40 m/min - Main motor power: 2 x 4.7 kW - Feed motor power: 0.75 kW - Blade spacing motor power: 0.12 kW - Total power requirement: 11.5 kW - Roller table length: 2 x 240 cm - Roller table width: 460 mm - Extraction port diameter: 160 mm - Transport dimensions (L/W/H): 200 / 200 / 140 cm - Weight ~ 1000 kg Dodpfx Asw H Rdaem Rjch

Condition: used, Year of construction: 1989, pressure 20 t Djdpjvr Hkzefx Am Rech total power requirement 20 kW weight of the machine ca. 5 t

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, workpiece height (max.): 60 mm, workpiece width (max.): 2,800 mm, edge thickness (max.): 20 mm, controller model: IMATRONIC MT, The machine has the following configuration: Unit 1: Milling unit with CNC positioning Unit 2: Milling unit with NC positioning, hot melt adhesive tank, pre-press for hot melt adhesive Edge bonding + edge processing Unit 1: Edge banding machine (2 motors) Unit 2: Overlapping edge trimmer (2 motors) Unit 3: Edge trimmer (2 motors) Unit 4: Milling machine (1 motor) with automatic timer Unit 5: Milling machine (1 motor) with automatic timer Unit 6: Belt sanding machine (1 motor) Unit 7: Belt sanding machine (1 motor) Unit 8: Brushes (1 motor) TECHNICAL DETAILS Panel height min.: 8 mm Panel height max.: 60 mm Dcsdpfx Asyttrxem Rjh Panel width min.: 280 mm Panel width max.: 2,800 mm Edge thickness min.: 0.4 mm Edge thickness max.: 20 mm Distance between feed tracks: 1,000 mm MACHINE DETAILS Control system: IMATRONIC MT EQUIPMENT CE marking The machine is sold and delivered in its actual and legal condition ('as seen and approved') on the basis of photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination location. External reference: 6561

Condition: used, Year of construction: 1989, Pressure total: 800 ton Dcodpfjyl Tl Nex Am Rsh Ram stroke: 700 mm Slide adjustment: 600 mm Shut height (stroke down, adjustment up): 1475 mm Free frontal opening L-R: 3700 mm Free lateral opening F-B: 2300 mm Table surface area : 3600 x 2200 mm Slide area: 3500 x 2070 mm Die cushion capacity in table: 150 ton Die cushion stroke: 250 mm Die cushion pad area: 2780 x 1570 mm Ejector in ram: 60 ton Ejector stroke in ram: 150 mm Number of strokes: 7 - 21 s.p.m. Required power: kW Height over floor approx.: 9510 mm Weight of machine approx.: 260 ton

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: ADS550×5000, Power supply: 380–420 V / 50 Hz Total power: 5.5 kW Dcedex R U Epopfx Am Rsh Saw motors: 2 × 2.2 kW Saw blade: Ø550 mm Max. cutting length: 5000 mm Min. cutting length: 360 mm at 90° Cutting angles: 45° and 90° Repeatability: ±0.1 mm Air consumption: 60 L/min (0.5–0.8 MPa) Fully CNC controlled Two saw heads that can operate independently or synchronously Automatic positioning of the moving saw head via servo drive Automatic height measurement system for increased precision at 45° Touchscreen control with clear interface Integrated label printer (traceability & workflow) Infinitely adjustable saw feed Very stable and heavy machine base

Condition: excellent (used), Cantilever rack, double-sided, 10 levels, arm extension 380 mm, extendable by 220 mm, height 2420 mm, total depth 1000 mm, length approx. 2700 mm, cantilever arms made of 80 mm U-steel, very robust design, the rack is hot-dip galvanized, weight 1190 kg, rack disassembled for transport. Dcedpfx Amsw Icyuo Roh

Condition: excellent (used), Double side - Stand-alone Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0.3 / 3 Edges thickness in stips / lippings mm 1,3 Panels thickness (min/max) mm 8 / 40 Working width (min/max) mm 266 / 2400 (option 3000) Distance (center-axes) of the Disappearing Dogs (mm) 540 (prepared for 270 mm) Numerical Control ICOS OPEN Feeding speed (adjustable) max. 60 m/min Without Transmission bar (Master & Slave system) SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (KW 4.5 x2) Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue) 283.205 Band Pressure zone. Dcodpsu Ekbnsfx Am Roh Edge coils supporting unit (No. 2 reels) Servo-drive Snipping (end-cutting) unit 08.42 (KW 0.2 x 2) 0°-25° (max. working speed 50 m/min) Fine Trimming unit 08.055 (KW 0,66 x 2) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (KW 0.66 x 2) Spraying Unit (for polishing liquid) Free space (for possible addition of a scraper) Buffing unit 08.617 (Kw 0.18 x 2)

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) max mm 1,0 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 (266) / 3300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Dcsdpfxswz Ic As Am Reh Hogging Units (2 x Kw 6,6) Free space EDGE-BANDING PART (for each side): Lamps to heat the workpieces side Glueing Unit (Hot Melt glue) 04.1570 Pressure zone Edge coils supporting unit (No. of reels) 2 Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) 30 m/min (0°-25°) Rough Trimming unit 08.0555 (1 x Kw 0,66) Multi Function Unit (Profile contour Trimming unit) MFA 08.342 (2 x Kw 0,66) SERVO - 20m/min Profile Scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.617-2 (2 x Kw 0,18) Milling grooving unit: 75.30 (2 x Kw 4,4)

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 / 1300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Hogging Units 75.30 (2 x Kw 6,6) Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) 04.1570 + 283.201 Pressure zone Edge coils supporting unit (No. of reels) 6 Rough Trimming unit 08.055 (2 x Kw 1) 0°-30° Dedpjunrwnsfx Am Rsch Fine Trimming unit 08.055 (2 x Kw 0,66) 0°-30° Profile Scraping unit 08.515 Free space Buffing unit 08.617-2 (2 x Kw 0,18) Nr. 2 Milling grooving units RIGHT: 75.30 (2 x Kw 4,4) 90°-180°

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 60 Working width (min/max) mm 240 / 2500 Numerical Control PC 22 Adjustable feeding speed (m/min) 10 - 40 Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit 1 x Kw 4,5 (hydro) Hogging Units KD 11 (2 x Kw 8,1) hydro Dcsdslikydjpfx Am Rsh EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue + Quick Melt system) A3 + A34 Edge coils support (No 6 reels) Band Pressure zone "C" Rough Trimming unit 2 x Kw 0,55 Fine Trimming unit MF 20 (2 x Kw 0,55) 20° Corner Rounding unit (Contour Trimming) FF22 (4 x Kw 0,4) max 35 m/min Profile edge scraping unit PN 20 Finish processing unit (Glue scraper + Buffing unit) FA 11 Free space

Condition: excellent (used), Double side Sizing & Edge banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 240 / 1000 Numerical Control / Software NC 21 / Homatic Adjustable feeding speed (m/min ) high speed 10 - 60 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Hogging Units KD 10 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 + A34 (high Speed package) Pressure zone Edge coils supporting unit (No. of reels) 2 Rough Trimming unit 2 x Kw 0,55 Dcjdpfxeifnxxe Am Roh Fine Trimming unit 2 x Kw 0,55 (0° - 30°) Finish processing unit (Glue scraper + Buffing unit) FA 11 Milling grooving unit UF11 (1 x Kw 4) 0°-90°

Condition: used, Year of construction: 1997, pressure 0630 t stroke 300 mm no. of strokes 10- 75 Hub/min table-size 3600 x 2200 mm passage width 4000 mm ram surface 3600 x 2200 mm column travel -side 2000 mm ram adjustment 150 mm shut height (stroke down, adjustm. up) 1000 mm voltage 400 V height over floor 7600 mm Depth of Press under floor 2500 mm total power requirement 160 kW weight of the machine ca. 225 t dimensions of the machine ca. 750 m² Dedowx R Rdopfx Am Rjch Complete feeding line comes with the machine. It works on a material width of 300- 1600 mm and a thickness of 0,5- 3 mm. Machine has two working tables which move in and out to the front. To the side machine has a stacking device with two pallets. It also has two stacking pallets to the backside. Machine has a Coil charging device of 3 Coils with 25 t, a decoiler Schnutz, a material feeder, a straightening machine and a roll feeder.