Used Double Plate Saw for sale (30,037)

Year of construction: 2005, condition: good (used), I sell the double mitre saw OMGA TRF 527, year 2005. Cutting length 390 - 2800mm Cutting width max. 170mm Cutting height max. 90mm Ibodpfx Aajg Tumcjcoc Tilting heads 0 + - 45° 2 Horizontal + 2 Vertical pneumatic Material pressures 2 Motors x 1,62kW (2,2 HP) Good condition. Available immediately.

Condition: new, Year of construction: 2025, CORMAK H-50/70 is a highly efficient column band saw for semi-automatic cutting of steel profiles, cast iron and non-ferrous metals. Its column design ensures rigidity during cutting, and employment of a completely different arm guiding technology than in pivot band saws provides cutting time reduction and accuracy increase. Machine description CORMAK H-50/70 is a highly efficient column band saw for semi-automatic cutting of steel profiles, cast iron and non-ferrous metals. Its column design ensures rigidity during cutting, and employment of a completely different arm guiding technology than in pivot band saws provides cutting time reduction and accuracy increase. CORMAK H-50/70 semi-automatic band saws, after being switched on, do the whole cutting cycle automatically, i.e. clamp the cut material in the hydraulic vice, switch on the cutting band, lower the cutting arm (adjustable speed), stop the machine after cutting, raise the arm up (adjustable arm height) and switch the hydraulic vice off. Manual handling of the machine is simplified to feeding material towards the bumper. Solid uniform cast iron arm along with the refined, stable design ensure that CORMAK H-50/70 is rigid and reliable, providing very precise cutting. Hydraulic band tension provides optimum cutting. In the case of band breakage the machine stops automatically. Precise guiding of the band is ensured by guides with bearings and cemented carbide inserts. The innovativeness and production of semi-automatic and automatic series "CORMAK-PREMIUM LINE" band saws, compliant with the norms and standards consistent with ISO:910001 and ISO:140001 certificates, warrant safety, quality and reliability of the product. M3V motors from ABB, a renowned worldwide manufacturer, warrant long-term reliability. Technical data Type Semi-automatic Arm raising and lowering Hydraulic, with stepless lowering adjustment Band speed 26/41/66 m/min Vice Hydraulic Cutting band dimensions 41×1.3×6430 mm Total power 8 kW Dimensions 3200×1100×2100 mm Weight 2900 kg Maximum cutting range [mm] Isdpfx Aasizi T Eecjbc Angle 0º ø500 500×700 Default equipment Control panel at the front of the machine Semi-automatic work Built-in hydraulic unit Arm position memory function Brush for cleaning the band Hydraulic band tension Semi-automatic work Hydraulic band tension Cooling system Bi-metal cutting band EC declaration of conformity User manual

Condition: good (used), Year of construction: 2009, in a good working condition, DG244/E555/1 , 6 meters Isdpfx Aaotuvg Djcjbc

Condition: good (used), Year of construction: 2016, Year: 2016 - technically efficient, ready to work - after full service - cutting length: 4000 mm - discs: 500 mm (feed from the rear) - pneumatic inclination of both heads: 90°, 45°, 22.5°, intermediate angles set manually - operator panel with Windows - cooling and lubrication installation for both heads - movable roller feeder - vertical and horizontal pneumatic clamps - automatic disc covers - delivery device for long elements - safety gates Ibedpstqmmdofx Aacec

Condition: excellent (used), functionality: fully functional, OMS FC330R double saw for wood, aluminum 2 x 2.2 kW Specification: • condition - used, after inspection • manufacturer - OMS • model - FC 330 R • main engines - 2 x 2.2 kW • hydraulic-pneumatic control • max. cutting length - 351 cm • min. cutting length - 36 cm • max cutting cross-section - 100x150 mm (at a right angle) • max disc diameter - 330 mm • extraction nozzles fi 60 mm • cutting at an angle in the range of -45 to +45 degrees (right, left) • clamps cut elements vertically • weight - approx. 800 kg • dimensions - 405 x 100 x 145 cm (length x width x height) Additional information: • very good, factory technical condition • the photos presented show the actual condition of the item for sale Ibodpfx Aewthgfjacjc • possibility of switching on and checking the device on site

Condition: excellent (used), Year of construction: 2024, operating hours: 193 h, functionality: fully functional, travel distance X-axis: 7,200 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 340 mm, cutting width (max.): 335 mm, workpiece length (max.): 6,000 mm, milling spindle speed (max.): 6,000 rpm, section length (max.): 6,000 mm, TECHNICAL DETAILS - Profile Milling Machine Processing length: 7,200 mm Number of axes: 4 Control: eluCAM graphical, Windows XP user interface Workstations: 2 independently operating stations Turret tool changer: 8 tools, servo motor driven Tool holder: BT 30 Disc mill diameter: 180 mm Tool length: 150 mm (from point of attachment) Travel distances Travel X-axis: 7,200 mm (without end-face processing), 7,080 mm (with end-face processing) Travel Y-axis: 480 mm Travel Z-axis: 340 mm Rapid traverse X-axis: 60 m/min Rapid traverse Y-/Z-axis: 30 m/min Positioning accuracy: ±0.1 mm/m Spindle Milling spindle speed: 1 to 6,000 rpm Milling spindle power: 6.0 kW Supply Air connection: min. 7 bar Air consumption: 100 l/min Electric connection: 400 V, 3~, 50 Hz, 35 A EQUIPMENT two independent workstations with light barrier and camera system Non-swiveling inclined milling head for 2 tools, Er20A, up to 18,000 rpm Inclined milling head swiveling 4 × 90°, Er20, up to 22,000 rpm Inclined milling head non-swiveling for steel, Er20A, 1,554 rpm Fixed saw head i=1:1, for D=300 mm saw blade, suitable for 90° cross cuts Carbide saw blade Z=100, D=300 mm, cutting width 3.2 mm Tool holder i=1:3.86 for 18,000 min⁻¹, ER25 Cooling/lubricating unit for steel processing Disc milling holder BT30, D=16 mm Disc cutter D=92 × 6 mm, Z=14, D=16 mm, carbide teeth TECHNICAL DETAILS - Double Mitre Saw Max. cutting length: 6,000 mm Min. cutting length at 90°: 335 mm Min. cutting length at 45°: 335 mm Saw blade diameter: 420 mm Cutting angle (rotation): pneumatically adjustable 90° and 45° inside, intermediate angles and 22.5° acute manually adjustable with digital display Cutting angle (tilt): pneumatically adjustable 90° and 45° inside Saw direction: saw blades move from bottom to top Control Control type: E580/1 Length adjustment: automatic with positioning control Saw blade tilt: pneumatically automatic between 90° and 45° Positioning accuracy: ±0.1 mm/m Positioning: pneumatic locking Operating system: Windows Saw unit Speed: 2,800 rpm Power per motor: 4,000 W (5.5 HP) Saw blade cooling: available Air consumption per cycle without cooling: 40 l Air consumption per cycle with cooling: 64 l Ibsdpfjwprmzjx Aacec Supply Electric connection: 230/400 V, 3-phase, 50 Hz Air connection: 7 bar Dimensions and Weight Length: 7,550 mm Width: 1,600 mm Height: 1,450 mm Weight: 1,750 kg EQUIPMENT Automatically closing protective covers Electronic positioning of the heads with +/- 0.1 mm/m accuracy Digital angle display for manually adjustable special angles Pneumatically adjustable saw blade rotational and tilt angles Operation via Windows control with 8.4" display and handwheel Cooling system for saw blades included Saw unit with bottom feed for optimal cutting force

Condition: excellent (used), Year of construction: 2015, AUTOMATIC TWO-HEAD SAW ELUMATEC DG 244 + E580 -5 YEAR 2015 Iedjwltqajpfx Aacjbc

Condition: new, Year of construction: 2025, saw band length: 7,000 mm, saw band width: 54 mm, cutting speed: 100 mm/min, cutting width (max.): 750 mm, cutting height (max.): 550 mm, warranty duration: 24 months, power: 5.5 kW (7.48 HP), “STANDARD FEATURES: • HYDRAULIC VICE • VARIABLE SPEED CONTROL (INVERTER) Ibodpfovyywqox Aacoc • PLC CONTROLLED SCREEN • SAFETY SWITCHES • HYDRAULIC STRIP TENSIONING • DOUBLE VICE • SERVO MOTOR MATERIAL FEED • ADJUSTABLE HEAD DOWN SYSTEM • TIMABLE CHIP CONVEYOR • 1 SAW BLADE • 2 MATERIAL CARRYING TABLES • 24 MONTHS MECHANICAL 12 MONTHS ELECTRICAL WARRANTY • COUNTRY OF ORIGIN: TURKEY • MODELS PRODUCED BETWEEN 220 MM DIAMETER – 3000 MM DIAMETER TECHNICAL FEATURES : SAW BLADE DIMENSIONS 54x1.3x7000 mm SAW SPEED 20 – 100 M/MIN MAIN MOTOR 5.5 KW SERVO MOTOR 2.2 kW HYDRAULIC MOTOR 1.1 kW COOLANT PUMP 0.09 KW VOLTAGE 3X380 V FREQUENCY 50 HZ HYDRAULIC OIL CAPACITY 26 LT COOLANT WATER CAPACITY 105 LT CUTTING HEIGHT 850MM MACHINE DIMENSIONS 2092x3404x2115 mm WEIGHT 3200 KG AT THAT DEGREE 550X750 MM

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 4550 PROFILE PROCESSING AND CUTTING CENTER ( 9 AXIS & 10 STATION ), - In aluminum and PVC profiles; Grooving, hole drilling, marking, cutting at different angles, etc. Ability to perform operations - 10 special air-cooled spindle motors for high-speed aluminum - Axis speeds averaging 120 m/d - Precise 3-axis profile holding station - Profile feeding capacity 7 pieces Iodpfx Aaercm Ruecebc - Profile machining length maximum 6500 millimeters / minimum 600 millimeters - Automatic profile length detection - Windows-based, easily adjustable user-friendly interface - Data transfer via USB, Online remote monitoring system - Remote connection support - 23.8" Touch high-performance touchscreen - 30 - 150 degrees between, +- 0.1 degrees servo-controlled cutting unit that allows precise cutting - Transporting the cut waste profiles to the collection cart with automatic conveyor system STANDARD EQUIPMENT - Ø550 Millimeter saw - Automatic waste chip conveyor discharge unit - Barcode printer OPTIONAL EQUIPMENT - Compatibility with CAM programs - Optional length - Output conveyor with belt system - Safety barrier (Sensor)

Condition: good (used), Year of construction: 2006, Year: 2006 - technically efficient, ready to work - after full service - cutting length: 6000 mm - discs: 550 mm - E555 control - digital angle indicator - pneumatic angle adjustment 45-90 degrees - cutting according to external dimensions, without correction - cooling installation - roller feeder - vertical pneumatic clamps - automatically lowered and raised disc guards - chip extraction for each head Ijdpor Ikvuefx Aacobc

Condition: ready for operation (used), OMGA V113P double saw for frames, strips Specification: • condition - used • manufacturer - OMGA • model - V113P Ibedpfx Aewgdgneacec • two 300 mm diameter discs permanently set at a 45 degree angle each • total power 2.2 kW (2 engines of 1.1 kW each) • spindles fi 30 mm • pneumatic clamps • cutting cross-section ~ 100 x 130 mm • original painting • additional tables extending the tops by 100 cm (2 pcs.) • 1993 year of production • weight 225 kg • dimensions 80 x 142 x 132 cm cm (length x width x height) Additional information: • very good, factory technical and visual condition • the photos shown show the actual condition of the item for sale • possibility of switching on and checking the device on site

Condition: excellent (used), Max.Cutting Height 240 mm Max. Cutting Width 400 mm Max. Working Width 610 mm Min. Cutting Length 800 mm Diameter of Circular Saws Ø 400 mm Diameter of Saw Bore Ø 90 mm Iedpeu Umv Defx Aacsbc Feeding Motor 3 kW - 1450 rpm Main Motor 2 x 75 kW

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 2396, overall weight: 140 kg, rotational speed (min.): 2,800 rpm, Total width: 240 mm Total height: 120 mm Spindle speed (min): 4,000 rpm Spindle speed (max): Iodpfx Ajwhpnaoacjbc 7,000 rpm Total weight: 300 kg Rotation speed (max): 7,000 rpm Rotation speed (min): 4,000 rpm Input voltage: 400 V Equipment: Rotation speed infinitely variable Soundproof automatic overhead milling machine. Adjustable feed and rotation speed. Milling at an angle from -45° to 45° by adjusting the fence. Easy and quick blade change thanks to the pneumatic quick coupler. Pjbtxbovf Nw Roq H Iepr

Condition: used, Year of construction: 1994, Technical details: saw blade diameter: 450 mm revolution per minute: 2820 U/min cutting lenght max.: 5000 mm cutting length min.: 240 mm air pressure - required: 6-8 bar hole of sawblade: 32 mm mitter cutting - both sides: 45+90 ° air-pressure connection: 6 - 8 bar total power requirement: ca. 4,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 6,05x1,49x1,79 m Further features of the machine: Ibsdeu Nigkjpfx Aacjc - Pneumatic vertical and horizontal tension - pneumatic mist spraying device - height adjustable machine feet - material supports movable with saw - piece counter Cutting diameter according to tabular cutting range diagram, as dependent on speed and saw blade. Accessories: - 2 spare saw blades Machine can be demonstrated under power. i.D. *

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 402 Alttan Çıkma Kesim Makinası, - Complies with CE standards. - Used for cutting aluminum PVC profiles - Hydro-Pneumatic cutting process - Adjust cutting speed according to profile Ibedpferahzgox Aacjc - Right and Left -60, -45, -30, -22,5, -15, 0, +15, +22,5, +30, +45, +60 can cut at fixed angles. - Pneumatic vertical and horizontal press - Ø550 millimeter Aluminum saw with diamond tip - Roller conveyor is available (3 meters right and left) - Oil spray system - 3 Kw Motor and Hydro - check for precise cutting

Condition: used, Year of construction: 1993, Technical details: Ibedpfewz Hygox Aacec cutting diameter: 195 x 120 mm cutting range min.: 135 x 120 mm saw blade diameter: 380 mm cutting length min.: 500 mm cutting lenght max.: 6000 mm max. spindle speeds: 2800 U/min total power requirement: 3 kW weight of the machine ca.: 850 kg

Condition: good (used), Year of construction: 2005, functionality: fully functional, workpiece weight (max.): 1,230 kg, AUTOMATIC SAW / DOUBLE HEAD STB / FIMTEC SD 500 S6 YEAR 2005 Ibsdper E Alqefx Aacjc

Condition: used, Technical details: saw blade diameter: 420 mm cutting lenght max.: 5000 mm cutting range: H x B: 180 x 100 mm air pressure - required: 6 bar mitter cutting - both sides: 45° - 90° (manuell) ° voltage: 380 / 220 V total power requirement: ca. 8,0 kW weight of the machine ca.: auf Anfrage t dimension machine xH: 6,4 x 1,3 x 2,0 m Circular saw with 2x sawhorses for cutting profiles with inclined cuts up to 45°. microprocessor positioning control BECKHOFF E 70-300 with absolute encoder, digital display Ibjdpfx Aasu Nigwjcjc travel per saw block = 2350mm, motorized Clamping cylinder for each horizontal and vertical, manual flushing device hydropneumatic feed use of carbide saw blades i.D. *

Year of construction: 2018, condition: ready for operation (used), A high-precision Takisawa CNC lathe with double spindles is available. Spindle power: 2x 7.5kW, speed: 5000rpm, spindle nose: F-80, tool holder: 2x 5 places, max. turning diameter: 50mm, max. turning length: 50mm, max. workpiece weight: 2x 0.5kg. Machine dimensions X/Y/Z: approx. 2600mm/2550mm/2150mm, weight: approx. 4300kg, control: 2x Fanuc Oi-TF, operating hours: 11179h. Including hinged belt conveyor to the rear, automatic central lubrication, machine cladding with coolant pump, portal loader type D, Raku Raku loader, turning station, automatic loading and unloading door per spindle and storage chute for test part. Documentation available. On-site inspection is possible. Iedju Dm Izepfx Aacebc

Condition: used, total width: 940 mm, total length: 3,750 mm, total height: 1,450 mm, - Main motor power [kW]: 1.1 - Max. cutting height [mm]: 110 - Spindle speed: Manual - Documentation available: No - Transport dimensions: 3750mm x 940mm x 1450mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Ibedexa Eibepfx Aacjc Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2000, machine/vehicle number: 6535, Offer 25230 Hydraulic Twin-Column Guided Bandsaw Machine Technical Specifications: - Automatic operating cycle for the cutting process, hydraulic lifting/lowering of the saw frame - Manual mitre adjustment with hydraulic clamping - Automatic material feed unit, motorized mitre adjustment - Saw blade dimensions: 4400 x 34 x 1.1 mm - Infinitely variable cutting speed: 15 – 150 m/min - Infinitely adjustable cutting pressure: 10 – 15 bar Ibsdpfx Aaew I Scfococ - Feed rate: 0 – 300 mm/min - Cutting range at 90° – Max round: 335 mm – Max square/flat: 500 x 335 mm - Automatic material feed: 5 – 2300 mm - Drive: 400 V / 6.5 kW - Space requirement (approx.): W 2400 x H 1950 x D 2200 mm - Weight (approx.): 1800 kg

Condition: ready for operation (used), Complete, fully operational sawmill for sale due to retirement. All documentation up to date, with an extensive supplier base and the entire production already sold. More information and pricing available privately. Only for genuinely interested parties. Ijdpfxsxma Huo Aacsbc

Condition: good (used), Capacities: Capacity 360 mm diameter , Rectangular 704 x 360 mm at 90 degrees or 340 mm diameter , Rectangular 400 mm x 340 mm at 45 degrees. Ijdpfxsig T Abs Aacobc Input 415/3/50 4kw approx. Speeds 20-120 meters per min. Swivel frame 0-45 degrees. Vice opens 710 mm. Measuring Head. Infeed / Outfeed powered rollers. Infeed / Outfeed Cross transfers

Condition: used, Year of construction: 1994, total width: 1,200 mm, total length: 4,700 mm, total height: 1,600 mm, Weight: 672 kg - Main motor power [kW]: 4.5 - Max. cutting length [mm]: 4040 - Max. cutting height [mm]: 150 - Max. saw blade diameter [mm]: 400 - Arbor saw blade diameter [mm]: 32 - Year: 1994 - Documentation available: No - CE marking present: Yes - Serial number: 228822 - Voltage [V]: 380 - Power [kW]: 11.2 - Transport dimensions: 4700mm x 1200mm x 1600mm (l x w x h) Iodpfexbf E Sox Aacsbc - Transport weight [kg]: 672kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2000, Machine is made as a crosscut saw with automatic push-up system. The parts are still present to rebuild it to a double crosscut saw. - Max. saw blade diameter [mm]: 330 - Year: 2000 - Documentation available: No - CE marking present: Yes - Serial number: 00T334 - Voltage [V]: 380 - Power [kW]: 4.5 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Ijdpjwnh Ixjfx Aacsbc Yorick Diebels