Used Double End Tenoner for sale (32,262)

Condition: used, Year of construction: 1997, pressure 1000 t Iasdjvuukuopfx Ag Ujl distance between columns 1260 mm stroke 315 mm no. of strokes 10, 21 - 42 /min distance table/ram, max. stroke up, adjustment up 1295 mm table surface area 1250 x 800 mm table height over floor 670 mm side window 830 mm capacity of ejector in table 63 t ejector stroke of ejector in table 75 mm capacity of ejector in ram 16 t stroke of ejector in ram 23 mm ram surface 1250 x 800 mm ram adjustment 20 mm feeding length transfer 0 - 250 mm closing travel of each rail programmable 0 - 140 mm no. of strokes of the transfer 42 /min power requirement 135,0 kW weight 120,0 t Dimensions (WxDxH) 5,9 x 4,8 x 7,95 m height above floor 6,95 m height beneath floor 1,0 m with DC drive, pneumatic clutch, motoric ram adjustment, pneumatic counterbalance in ram, mechanical ejector in table (pneumatically controlled), mechanical ejector in ram, ram interlocking, die clamping system in table and ram, motoric oil circular lubrication, grease lubrication control of the press: Siemens S 5 - CNC 2-Achs-Transfer (Fabrikat Dreher, Type STV-D Modell 350/100-SO, Bj. 2008), Steuerung Siemens S 7 - cleaning system (make Beyss, yom. 1989) as is where is, WITHOUT putting into operation, stored in dismantled condition The press was previously installed in a soundproof enclosure, which is not part of the scope of delivery Video at seller's site before dismantling available

Condition: good (used), Indoor crane, crane, push carriage, crane running gear, crane undercarriage, girder carriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage single girder bridge crane Isdpfx Agedc Ipms Ujal -Friction wheel Demag type: RF180 -Carrier width: 120 mm -Load capacity: 2000 kg -Number: 2x drives available -Price: complete -Dimensions: 2550/320/H350 mm -Own weight: 500 kg

Condition: new, 1 brand new horizontal band saw with swivel frame and double mitre R/L Make: HUVEMA / BEKA-MAK, Origin Turkey Model: HU 230 DG-4 Cutting capacity: Round: 230 mm Rectangle: 320 x 130 mm Square: 230 mm -45° Round: 180 mm -45° Flat: 230 x 100 mm -45° Square: 150 mm +45° Round: 210 mm +45° Flat: 230 x 160 mm +45° Square: 180 mm +60° Round: 120 mm +60° Flat: 120 x 100 mm +60° Square: 100 mm Table height: 760 mm Main drive motor power: 1.0 – 1.3 kW, 400 V, 50 Hz Coolant pump motor power: 0.12 kW 2 blade speeds: 35 / 70 m/min Saw blade dimensions: 2730 x 27 x 0.9 mm Dimensions (L x W x H): 1350 x 700 x 1300 mm Weight: 415 kg Accessories / Special features: • Double mitre cuts left/right via a swivel frame o The workpiece remains stationary during cutting! o No need to turn the material for mitre cuts! o High efficiency with substantial time savings! • Precision stops preset at 0°, 45°, and 60° left, and 45° right • Replaceable worktable • Quick-release vise, adjustable side-to-side (left/right) • Adjustable length stop 500 mm for repeat cuts • Saw arm lowering infinitely variable via hydraulic circuit • Coolant system • Chip brush • Swivelling control panel • Electric safety switches for blade tension and blade guard • Automatic cut-off at end of cut • Emergency stop switch • CE conformity Iajdpfx Aofk Ew Ejg Usl Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: M274150, cutting length (max.): 6,100 mm, total length: 9,500 mm, total width: 1,800 mm, total height: 1,800 mm, input voltage: 400 V, rotational speed (max.): 2,800 rpm, overall weight: 3,000 kg, power: 7 kW (9.52 HP), input frequency: 50 Hz, input current: 18 A, EMMEGI TWIN ELECTRA SUN TU/6 double mitre saw Note: The item can be collected from 16.02.2026 on a date to be arranged. FCA D-73529 Schwäbisch Gmünd – loaded onto truck Iaedsx Uyvzspfx Ag Usl

Condition: new, functionality: fully functional, machine/vehicle number: PT20DNEU2000, Year of construction: 2025, load capacity: 2,000 kg, lifting height: 2,000 mm, fuel type: electric, mast type: telescopic, construction height: 1,378 mm, fork length: 1,150 mm, empty load weight: 769 kg, total length: 1,955 mm, drive type: Elektro, construction width: 729 mm, Double-deck stacker Chassis number: PT20DNEU2000 Load centre: 600 Fork width: 180 mm Fork thickness: 60 mm Mast type: Telescopic Condition: New unit Technical condition: New Front tyre type: Superelastic Iodpsx Tm Afefx Ag Uoal Front tyre condition: New Rear tyre type: Superelastic Rear tyre condition: New Battery voltage: 24V Battery capacity: 150Ah Battery type: Lithium-ion Battery year: 2025 Battery condition: New Lithium-ion technology, double-deck loading,

Condition: used, axle configuration: 3 axles, first registration: 01/2017, loading space length: 13,350 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, total length: 13,620 mm, total width: 2,600 mm, total height: 4,000 mm, tire size: 385/65R22.5, tire condition: 70 %, color: white, Year of construction: 2017, Equipment: ABS, Reference size: 385/65R22.5 Rear axle 1: Tire tread: 70%; Reduction: single reduction Rear axle 2: Tire tread: 50%; Reduction: single reduction Rear axle 3: Tire tread: 40%; Reduction: single reduction Unladen weight: 8,400 kg Payload: 30,600 kg gross vehicle weight (GVW): 39,000 kg Body make: Schmitz Cargobull Damages: none = Company Information = Heisterkamp Used Trucks BV doesn’t just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are ready for immediate operation. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet current requirements, and uphold the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands Iodpfx Asx Tfcksg Ueal - Phone: - Email: - Website:

Condition: used, Year of construction: 1993, Pressure 1500 t distance between columns 5050 mm stroke 1100 mm Distance table/ram, stroke up 2300 mm Table surface area 5000 x 2700 mm pressure of drawing cushion in table 320 t Die cushion stroke in table 300 mm Die cushion area in table 4300 x 1830 mm Die cushion pressure in ram 120 t Die cushion stroke in ram 200 mm Die cushion area in ram 3410 x 1650 mm Ram surface 5000 x 2400 mm Speed down 360 mm/s Speed up 168 - 505 mm/s Working speed 19 - 86 mm/s Oil volume 10500 l Power capacity 450,0 kW Weight 400,0 t Dimensions (WxDxH) 3,47 x 6,95 x 12,21 m Height above floor 8,21 m Height below floor 4,0 m Iasdpfxsvuucqs Ag Uel year of manufacture 1983 - overhaul 1993 with oilhydraulic drive, drawing cushion in table, drawing cushion in ram (drawing cushion surface) approx. 3410 x 1650 mm), cutting impact cushioning / stroke limitation (adjustment of the spindle approx. 500 mm, max. dampening force approx. 750 t, dampening stroke max. approx. 30 mm), controllabel dependant on pressure/time and way as is where is, WITHOUT dismantling, WITHOUT loading

Condition: good (used), Indoor crane, crane, push carriage, crane running gear, crane undercarriage, girder carriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage single girder bridge crane Iodpfxsdc Iple Ag Uoal -Handover in the current condition as viewed -1x wheel missing (photos) -Friction wheel Demag type: 13/8RF8-2 -Carrier width: 120 mm -for narrow flange beams: IPE240 (120 mm wide) -the chassis are inserted into a steel beam -Load capacity: 2000 kg -Number: 2x drives available -Price: complete -Dimensions: 2550/320/H350 mm -Own weight: 500 kg

Condition: new, The EM 250, a robust Tube End Finishing Machine from KNUTH, is designed to provide precise deburring of tubes, profiles, and flat materials, making it an essential addition to any cold circular saw, shear, or profile processing setup. This powerful machine allows for effective deburring both inside and outside the workpieces utilizing a sturdy wire brush, ensuring that chips and burrs are thoroughly removed while maintaining the integrity of the cutting edge. With a motor rating of 2.2 kW and a speed of 3,000 1/min, the EM 250 is ready to enhance productivity in any workshop engaged in tube processing. It features a rigid machine foot and is equipped with a vacuum exhaust connection for cleaner operation. Moreover, it comes with a 5-year warranty for the drive motor, underscoring its reliability. For a well-rounded solution in Tube End Finishing Machines, consider the EM 250. Request a quote today to learn more about this powerful tool in Tube and Profile Processing. Iaedpfju E H Tgjx Ag Uol

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: M275930, cutting length (max.): 6,000 mm, total length: 9,000 mm, total width: 2,000 mm, total height: 2,000 mm, input voltage: 400 V, rotational speed (max.): 2,820 rpm, overall weight: 3,500 kg, power: 7.7 kW (10.47 HP), input frequency: 50 Hz, input current: 19 A, EMMEGI COMBI 5 AXIS STAR TU/6 Double Mitre Saw Iodpfx Ajx Uyr Njg Uoal Attention: The item can be collected from 16.02.2026 onwards, with the specific pickup date to be agreed upon. FCA D-73529 Schwäbisch Gmünd – loaded onto truck

Condition: used, Year of construction: 2006, 2006 | Mercedes-Benz Actros 3241 K 8x4 2004 RSP ESE 32 / 7-2 Double Turbine | Used Vacuum Truck | 204214 kms 📍Location: France, Boulazac Isle Manoire 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 57000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 32 inspection points 30 approved ✅ 0 imperfect ℹ️ 2 issues ⚠️ 📌 Inspector's Comment: Iaodpfx Agsx Rpdmj Usl Machine was working at the time of inspection, except as noted. Could not fully test vacuum hydraulic arm, (because of a fault in one of the cylinders). There is some oil residue around the PTO pump. Suction hose diameter 250 mm, max volume flow 3'000 m3/h, max vacuum pressure 47'000 Pa, side tipper discharge, filter system (40 cartridge filter with automatic cleaning, 6000mm range), remote control: yes, main tank size 10 m³, Air compressor system: max 4.5 m3/min, 7 bar 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "31334 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, axle configuration: 3 axles, first registration: 01/2019, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,720 mm, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, tire size: 385/65R22.5, tire condition: 40 %, color: white, Year of construction: 2019, Equipment: ABS, Tire size: 385/65R22.5 Rear axle 1: Tire tread: 40%; Reduction: single reduction Rear axle 2: Tire tread: 70%; Reduction: single reduction Rear axle 3: Tire tread: 80%; Reduction: single reduction Unladen weight: 7,200 kg Payload: 31,800 kg Gross vehicle weight: 39,000 kg Body manufacturer: Krone Damage: none Iajdpex Td Uxefx Ag Ujl = Company Information = Heisterkamp Used Trucks BV does not just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We manage used trucks and trailers that are immediately ready for operation. From our location in Oldenzaal, we select vehicles with care that are dependable, meet current requirements, and comply with the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Phone: - Email: - Website:

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Iasdpoxnlgcsfx Ag Usl Storage location: Garbsen

Condition: good (used), Hydraulic pump, oil pump, gear pump, vane pump, hydraulic power unit, double hydraulic pump Iaodpsgzwx Nsfx Ag Uel -Double hydraulic pump: from Battenfeld BA-T2400 injection molding machine -Drive: Siemens type 1LA6 207 30 kW 1465 rpm -Flow rate: l/min -Valves: Voith type DBV40 E25 FYM320 24 / DBV20 E25 FYM320 24 -Filter unit: Hydac -Operating pressure: bar -Dimensions: 1275/620/H500 mm -Weight: 322 kg

Condition: used, empty load weight: 7,754 kg, axle configuration: 3 axles, first registration: 08/2015, next inspection (TÜV): 07/2026, suspension: air, tire size: 365/65 R22,5, color: white, Year of construction: 2015, Equipment: ABS, Tare weight: 7,754 kg, Tyre size: 365/65 R22.5, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Rear underrun protection, Lift axle, Electronic Brake System EBS, Toolbox, Double deck, Hubodometer, 1x15 and 2x7 pin plug, Antispray, Brakes completely overhauled, Please find an overview of all available vehicles on our website. Finance required? We offer individual financing solutions, full service contracts and telematic services. We would be glad to advise you personally. Ijdox N Utkopfx Ag Usal

Condition: good (used), mileage: 427,636 km, power: 105 kW (142.76 HP), first registration: 10/1997, fuel type: diesel, tire size: 225 / 75 / R17.5, axle configuration: 4x2, wheelbase: 3,690 mm, fuel: diesel, color: yellow, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 6, suspension: steel, number of seats: 7, total length: 7,140 mm, total width: 2,550 mm, total height: 3,500 mm, loading space length: 4,030 mm, loading space width: 2,300 mm, loading space height: 1,840 mm, Year of construction: 1997, Equipment: ABS, fog lights, General information Number of doors: 4 Cab: Dubbel Cabine Technical information Number of cylinders: 4 Engine capacity: 7.999 cc Transmission Transmission: ZF, 6 gears, Manual gearbox Iedpfxjx Saq He Ag Ueal Axle configuration Tyre size: 225 / 75 / R17.5 Make axles: Iveco Brakes: drum brakes Suspension: leaf suspension Front axle: Max. axle load: 3200 kg; Steering; Tyre profile left: 50%; Tyre profile right: 50% Rear axle: Double wheels; Max. axle load: 6300 kg; Tyre profile left inner: 70%; Tyre profile left outer: 70%; Tyre profile right outer: 70%; Tyre profile right outer: 70%; Reduction: single reduction Weights Empty weight: 4.860 kg Carrying capacity: 6.130 kg GVW: 10.990 kg Interior Interior: grey Condition Technical condition: good Visual appearance: good Number of keys: 2 (2 hand transmitters) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: used, Year of construction: 2017, Dahlih DCM 4225 Double Column Machining Centre with Fanuc Series Oi-MF, Table Size 4000 x 2200mm, Travel X/Y/Z= 4200/2000/800mm, Max Table Load 12,000kgs, 40 Tool ATC, Spindle Taper BT50, Max Spindle Speed 6000rpm, Main Motor 26kW (35HP), 20 Bar Through Spindle Coolant, 4th Axis Interface, 300mm Column Extension, Right-Angled Head, Renishaw RMP 60 Probe, Swarf Conveyor, Floor Space 5650 x 11120 x 4130mm, Machine Weight 40,000kgs. S/No. 3006030013 (2017) Iajdpox E Ukhofx Ag Usl Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, axle configuration: 3 axles, first registration: 01/2019, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,720 mm, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, tire size: 385/65R22.5, tire condition: 30 %, color: white, Year of construction: 2019, Equipment: ABS, Reference size: 385/65R22.5 Rear axle 1: Tyre tread: 30%; Reduction: single reduction Iedpfx Ajx Td Ureg Ujal Rear axle 2: Tyre tread: 60%; Reduction: single reduction Rear axle 3: Tyre tread: 50%; Reduction: single reduction Unladen weight: 7,200 kg Payload: 31,800 kg Gross vehicle weight: 39,000 kg Body manufacturer: Krone Damages: none = Company information = Heisterkamp Used Trucks BV does not just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We handle used trucks and trailers that are immediately ready for operation. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today's requirements, and adhere to the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Phone: - Email: - Website:

Year of construction: 1998, condition: good (used), Manufacturer unknown Year of manufacture ?? TRAV H/ 2830 Iodpfx Agof Axile Ujal The Aro Corporation Mod.78051BSN Technical data: Compressed air driven for internal milling 50-225mm Accessories as shown

Condition: used, Year of construction: 2010, Technical details: x-travel: 6500/13500 mm y-travel: 4000 mm z-travel: 1500 mm w-axis: 2250 mm table surface area: 5500/12500 x 3000 mm max. workpiece weight: 50.000/75.000 kg ram head dimension: 520 x 625 mm milling spindle motor: 67,4 ( s1/100% ) kW max. torque on the spindle: 2900 Nm tool taper: DIN 69893 HSK-A 100 milling head speed: 1 - 1000 / 5 - 5000 U/min feed speeds: 1 - 24000 mm/min w-axis: 1 - 6000 mm/min. distance between columns: 3500 mm passage: 3000 mm total power requirement: 120 kW weight of the machine ca.: 250 t dimensions of the machine ca.: 29,5 x 9,5 x 8,2 m with CNC SIEMENS 840 D autom. tool magazine for 212 tool stations autom. milling head magazine for 6 milling heads 1 milling head -straight- 67 kW, 2900 Nm, 5000 rpm, HSK-A 100 Ijdpoway I Uefx Ag Ueal 2 milling head -straight extended- 40 kW, 1700 Nm, 5000 rpm, HSK-A 100 3 milling head -angular head extended- 40kW, 4000 rpm, 1800 Nm, HSK-A 100 4 milling head -angular head - 67 kW, 4000 rpm, 2900 Nm, 360 x 1°, HSK-A 100 5 milling head -angular head - 67 kW, 4000 rpm, 2900 Nm, 360 x 1°, HSK-A 100 6 milling head -universal Index head - 40 kW, 4000 rpm, 2100 Nm, C-axis 360 x 1°, B-axis +/- 110 x 1°, HSK-A 100 coolant attachment, chip conveyor *

Condition: used, axle configuration: 3 axles, first registration: 06/2019, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,720 mm, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, tire size: 385/65R22.5, tire condition: 40 %, color: white, Year of construction: 2019, Equipment: ABS, Reference size: 385/65R22.5 Rear axle 1: Tyre tread: 40%; Reduction: single reduction Rear axle 2: Tyre tread: 60%; Reduction: single reduction Rear axle 3: Tyre tread: 50%; Reduction: single reduction Unladen weight: 7,200 kg Payload: 31,800 kg Gross vehicle weight (GVW): 39,000 kg Body manufacturer: Krone Damage: none = Company Information = Heisterkamp Used Trucks BV does not just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of pre-owned trucks and trailers that are immediately ready for operation. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet current requirements and comply with the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Phone: - Email: - Website: Iajdpfx Aox Td Ulsg Uol

Condition: used, Technical details: faceplate diameter: 5000 mm Iaodpow Rz U Aofx Ag Ujl swing diameter: 6100 mm turning height: 2400 mm ram stroke each side: 1490 mm ram head dimension: 340 x 340 mm max. workpiece weight: 100.000 kg total power requirement: 100 kW weight of the machine ca.: 155 t faceplate turning speed range: 0,4 - 50 U/min with 2 x 2 axes CNC SIEMENS 840 D *

Condition: used, axle configuration: 3 axles, first registration: 07/2018, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 4,000 mm, tire size: 385/65R22.5, tire condition: 60 %, color: white, Year of construction: 2018, Equipment: ABS, Tire size: 385/65R22.5 Rear axle 1: Tire tread: 60%; Reduction: single reduction Rear axle 2: Tire tread: 30%; Reduction: single reduction Rear axle 3: Tire tread: 50%; Reduction: single reduction Unladen weight: 7,273 kg Payload: 34,727 kg Gross vehicle weight: 42,000 kg Body brand: Schmitz Cargobull Damages: none = Company Information = Isdpfx Agex Td Ufo Ujal Heisterkamp Used Trucks BV doesn’t simply sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are immediately ready for use. From our location in Oldenzaal, we carefully select vehicles that are dependable, meet today’s requirements, and comply with the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Phone: - Email: - Website:

Condition: used, Technical details: faceplate diameter: 4000 mm swing diameter: 4300 mm turning height: 330 mm faceplate turning speed range: 1 - 92 U/min workpiece weight: 18 t feeds: 1 - 4000 mm/min main drive motor: 55 kW total power requirement: 85 kVA weight of the machine ca.: 64 t dimensions of the machine ca.: 90, x 7,2 x 5,5 m Iaedpfx Aovb Dq Rjg Uol with CNC SIEMENS 840 D for 4 axis 2 Vertical Supports tool Basic holder chip conveyor *

Condition: used, Year of construction: 2004, Technical details: faceplate diameter: 4770 mm swing diameter: 7000 mm turning height: 1000 mm slide stroke: 1000 mm workpiece weight max.: 100000 kg faceplate turning speed range: 2 - 20 U/min feed speeds: 1 - 10000 mm/min rapid traverse: 10 m/min ram head dimension: 250 x 250 mm main drive: 100 kW total power requirement: 200 kW Isdpfx Aovb Hlweg Ueal with CNC SIEMENS 840 D 2 Vertical Supports with toolchanger 12 pockets C-axis and driven tooling SK 50 37 Kw 3000 rpm Chip conveyor and coolant attachment *