Used Double Circular Saw Waves for sale (17,839)

Condition: used, Longitudinal circular saw Longitudinal cutting circular saw Crosscut / Longitudinal circular saw, year 1999 Works from below for lengths up to 4.7 m Bsdpfx Aeq E Ivtebbslr Material thickness up to 110 mm Also suitable as a traveling saw behind a production line INFO!! For such a new Flender flat circular saw motor 10 kW you pay 4,700 EUR that is, more than at Jöma for the entire machine

Condition: ready for operation (used), REMA RESZEL CROSSCUT SAW, horizontal adjustment, swiveling arm up/down with counterweight, cutting assistance with power cable, ready for operation, 2.2 kW motor. Important: blade diameter 350 mm, table equipped with one roller at front and rear, very good condition, capable of cutting at virtually 4 angles. Radial arm saw DMNE 650/35. - CE certificate - Warranty and post-warranty service - Brand new machine TECHNICAL PARAMETERS: - Saw blade diameter: 350 mm - Max. cutting height: 95 mm - Max. cutting width: 580 mm - Arm swivel angle in vertical plane: ±90° - Table swivel angle in horizontal plane: +90° - Table swivel angle in vertical plane: ±90° - Motor power: 2.2 kW - Spindle speed: 2920 rpm - Spindle end diameter: 30 mm - Extraction nozzle diameter: 80 mm - Air demand in extraction system: 550 m³/h - Machine weight: 180 kg Bedpsxx U Azsfx Abbjlr

Condition: new, Year of construction: 2025, cutting length (max.): 3,200 mm, CIRCULAR SAW model SICAR SEGA 350 NEW machine in PROMPT DELIVERY SUPER DISCOUNTED PRICE with scoring unit digital tilt angle reader 0° / 45° bridge saw blade guard CE regulations : YES with Instruction Manual and CE declaration volts.380/50 up / down and tiltable 45° of blades are manual digital tilt angle reader 0° / 45° Bsdpfx Abjq Au U Hebelr carriage mm. 3200 indipendent motors main motor power Hp 7,5 scoring unit motor power Hp 1 max. diam. blade mm. 350 diam. of scoring unit mm.120 max. cutting hegiht at 45° mm. 92 max. cutting height at 90° mm. 120 max. cutting width at parallel guide mm.1250 bridge saw blade guard volt. 380/50

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, saw blade diameter: 200 mm, Fully automatic metal circular saw for burr-free cuts and high sawing performance in thin-walled material Manufacturer: Rohbi Series: RKA-86 Control system: Siemens Year of manufacture: 2007 Origin: Switzerland technical data: ----- - High-speed spindle for saw blade 500 - 3,900 rpm (2.0 kW) Blsdpotxlxujfx Abbjr - Clamping cylinder pneum. 2.000 N - Cutting range round solid material with HSS saw blade: 2-60 mm - Cutting range profiles solid material with HSS saw blade: 60x40 mm - Cutting range round pipe material with HSS saw blade: 2-70 mm - Cutting range profile material with HSS saw blade: 80x40 mm - Material feed carriage max. stroke: 1,250 mm Drive via gear wheel / gear rack - Clamping vice clamping: hydraulic - Minimum quantity lubrication - Saw blade dimensions: 100 - 200 mm (HSS or solid carbide) - Saw blade monitoring via load pick-up - Chip removal via external extraction possible - Material removal via retracting chute - Weight: 900 kg Accessories: ----- - Operating instructions - 3x sets of clamping jaws with drawings

Condition: good (used), Year of construction: 2015, saw blade diameter: 400 mm, - Underfloor circular saw BOMAR AL 400 - Saw blade 400 x 30 x 3.6 mm - Power 3.2 kW Bodpfx Ajxwqlvobbjlr - Weight approx. 400 kg - Pneumatic clamping cylinders, horizontal and vertical - Mitre adjustment possible on both sides

Condition: like new (used), Year of construction: 2018, operating hours: 2,150 h, functionality: fully functional, MEP TIGER 372 CNC LR 4.0 metal circular saw + CB4001 magazine High-performance automatic CNC metal circular saw with microprocessor control for cuts from 45°right to 60°left. Manufacturer: MEP Type: TIGER 372 CNC LR 4.0 Year of manufacture: 2018 Condition: very good, little used Switch-on hours: 2128h Cutting time: 1738h Machine with microprocessor control and two CNC-controlled axes, which allow up to 300 cutting programs, each with its own number of pieces and length, with the same material or material on the CB4001 loading magazine. Cutting range ROUND 0° 120 mm Cutting range ROUND 45° left 115 mm Cutting range ROUND 60° left 115 mm Cutting range ROUND 45° right 115 mm Cutting range SQUARE 0° 110 mm Cutting range FOUR-EDGE 45° left 100 mm Cutting range FOUR-EDGE 60° left 90 mm Cutting area FOUR-SQUARE 45° right 100 mm Cutting area FLAT 0° 180 x 100 mm Cutting area FLAT 45° left 120 x 100 mm Cutting area FLAT 60° left 90 x 90 mm Cutting range FLAT 45° right 120 x 100 mm Infinitely variable speed 15 to 150 rpm Motor 5.5 kW Bodexnpggepfx Abbolr Saw blade 370 x 32 mm Coolant system Length 2500 mm width 1840 mm height 1890 mm Weight:1060 kg Scope of delivery: - Original documentation - 4x saw blades

Year of construction: 2007, condition: excellent (used), functionality: fully functional, REMONNAY edger and resaw type DR8/225, year 2007 7-arm variable adjustment, 2 x 110 kW motors each Pre-cutting saws of the side fabric Cutting height 225 mm S-acceleration with infeed roller table with turning and alignment table Splinter separator with two lamellas Board cross conveyor Roller conveyor with pull-off device Bsdjfcltgepfx Abbelr Electric control cabinet with control panel incl. all accessories (circular saws etc.)

Condition: good (used), functionality: fully functional, cutting length (max.): 600 mm, pivoting range: 20,135 °, For sale: 1 used double mitre saw Manufacturer: Hebö Maschinenfabrik Model: unknown Year of manufacture: unknown Blsdpfexrag Eox Abbjr Saw blade diameter: 500 mm Processing length: up to 600 cm Mitre angle: 20 - 135 degrees Control system: see picture The machine can be inspected at our warehouse in 09599 Freiberg.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Technical information – Elumatec DG 244/2 year 2008 Control unit model: E355 Main electrical connection: 3/PEN/400V - 50 Hz Power consumption: 12.8 kW Additional information Advantages of the machine Technical advantages of the machine: - Saw blade diameter: 550 mm - Saw blade speed: 2,800 rpm - Compressed air supply: 7 bar - Weight: 1,850 kg Machine can be inspected in operation in department 76 Bljdpfx Asw A Iubsbbsr Available from week S38/S39 Price includes loading

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Double-shaft multirip saw Rema DMJB-200 Year of production: 2004 Bedpfx Asxyq Najbbelr The machine is in very good condition, little used, complete with a chip extractor mounted from above. DTR documentation included. Technical data: - saw blade diameter: 350 mm - cutting height of wood: 25–200 mm - minimum thickness of finished slats: 8 mm - maximum spacing of outer saws: 280 mm - minimum length of material: 800 mm - main motor power: 2 × 45 kW - spindle speed: 3300 rpm - conveyor width: 300 mm - feed drive motor power: 3 kW - pressure roller drive motor power: 2 × 0.75 kW - extraction nozzle diameter: 2 × 200 mm - required extraction air volume: 2 × 3400 m³/h - table height: 850 mm - machine weight: 5500 kg

Condition: ready for operation (used), The OMG TRF 527 NC is a compact, precise double miter saw, ideally suited for applications demanding high dimensional accuracy and repeatability. Features and Specifications: - Two saw blades Ø 220 mm, driven by powerful 1.5 HP (1.18 kW) motors - Fixed right saw unit; left saw unit adjustable via NC control through an intuitive 7" touchscreen Bodpjxvqvlofx Abbolr - Smooth-running ball bearing guide for the adjustable unit - Simultaneous cutting of two profiles stacked on top of each other - Pneumatic front hold-down clamps for secure positioning during cutting - Adjustable cutting angles for precise miter cuts Optional equipment: increased cutting length (up to 4,000 mm), angle stop for quick setting of cutting angles Technical Data (excerpt): - Max. cutting length: 2,800 mm (optionally 4,000 mm) - Min. cutting length: 158 mm (also at 45°) - Cutting capacity at 90°: 55 mm - Cutting capacity at 45°: 40 mm - Max. cutting height: 40 mm - Spindle speed: 5,000 rpm - Extraction ports: 2 x Ø 80 mm - Packing weight: approx. 230 kg - Packed dimensions (L x W x H): approx. 3,345 x 600 x 1,400 mm The OMG TRF 527 NC impresses with its compact design, high cutting precision, and user-friendly control system – ideal for operations requiring exceptional repeatability with small to medium workpiece dimensions. The machine is available for inspection at any time. Shipping available.

Condition: like new (used), Year of construction: 2019, operating hours: 1,750 h, functionality: fully functional, MEP Tiger 372 CNC LR 4.0 automatic metal circular saw (2019) Manufacturer: Mep Model: Tiger 372 CNC LR 4.0 automatic metal circular saw Year of manufacture: 2019 Blodpfxexnpf As Abber Condition: used, very good, inspected and cleaned Operating hours: 1750h Cutting range ROUND 0° 120 mm Cutting range ROUND 45° left 115 mm Cutting range ROUND 60° left 115 mm Cutting range ROUND 45° right 115 mm Cutting range SQUARE 0° 110 mm Cutting range SQUARE 45° left 100 mm Cutting range SQUARE 60° left 90 mm Cutting range SQUARE 45° right 100 mm Cutting range FLAT 0° 180 x 100 mm Cutting range FLAT 45° left 120 x 100 mm Cutting range FLAT 60° left 90 x 90 mm Cutting range FLAT 45° right 120 x 100 mm Continuously variable speed 15 to 150 rpm Motor 5.5 kW Saw blade 370 x 32 mm Coolant system Length 2500 mm Width 1840 mm Height 1890 mm Weight 1060 kg Scope of delivery: – Documentation – 2 m feed roller conveyor – Machine lighting – Chip conveyor – Coolant system

Year of construction: 2004, condition: used, Technical details: Saw blade diameter: 450 mm cutting diameter: 150 mm hole of sawblade: 50 mm saw blade diameter: 400 - 450 mm saw blade rpm: 6 / 12 / 24 / 45 U/min cutting range 90 degrees: square: 140 x 140 mm cutting range 90 degrees: round: 150 mm cutting range 90 degrees: flat: 400 x 30 / 345 x 70 / 300 x 95 mm table-size: Ø 700 mm table rotating: 360 Grad clamping capacity: 30 bar electrics - voltage/frequency: 400 / 50 V/Hz total power requirement: 3,6 kW weight of the machine approx.: 1600 kg dimensions of machine: 1,5 x 1,0 x 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE - UNDERFLOOR SAW for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Circular saw with hydraulic material clamping (clamping pressure adjustable) Bodpeu Nit Rjfx Abbelr miter +30° to - 90° Equipped with electro-hydraulic control Hydraulic pump 2.2 kW; 23 l/min. Coolant system integrated in the machine base Piece counter *

Condition: excellent (used), Year of construction: 2015, Saw blade Ø: 350 mm for pipes 90/45°: 120/110 mm for square tube 90/45°: 105/95 mm for profiles 45°: 105x105/80 or 110 x 80 mm for round material at 90/45°: 60/50 mm 2 saw blade speeds: 1400/2800 rpm Space requirement with original stand: 1050 x 600 x 1450 mm Bljdpfxsxlg Icj Abbor Weight: 162 kg

Condition: excellent (used), Year of construction: 2007, Complete saw line consisting of loading unit, fully automatic circular saw, and unloading unit Loading Unit: Horizontal loading magazine model HLM 4-strand timing belt conveyor 6 compartments, each 285 mm wide, for holding profiles Maximum material height as per saw cutting area; round material max. diameter 130 mm 3 glide strips between timing belts provide additional support Profile length min. 2,700 mm, max. 6,500 mm Saw: Fully automatic circular saw Pressta-Eisele model PROFILMA 510 E-SA Maximum saw blade diameter: 500 mm Continuously variable speed adjustment Hydro-pneumatic saw blade feed, infinitely adjustable, from rear to front Siemens S7-300 controller with touchscreen Reversing device with five-fold stroke up to max. 5,000 mm Electric material feed 3 - 1,000 mm (single stroke) Cutting gap extension, both sides Pneumatic extraction slide Scrap flap after the saw for offcuts / remnants Cut-off length depends on profile, from 8 mm Menzel minimal quantity lubrication Clamping pressure regulation 2 extraction nozzles for dust collection Unloading: Bedpoxvbvvsfx Abbelr Table area 1,500 mm x 2,500 mm Pneumatic cross transfer

Condition: new, Ideal for machining pipes, profiles, and solid materials made of stainless steel, iron, etc. in industrial applications. Technical Data: Cutting Capacity: Round 0°: 235 mm Square 0°: 200 x 200 mm Flat 0°: 280 x 190 mm Round 45° right: 190 mm Square 45° right: 170 x 170 mm Flat 45° right: 190 x 180 mm Round 60°: 120 mm Square 60°: 120 x 120 mm Flat 60°: 120 x 115 mm Round 45° left: 175 mm Square 45° left: 145 x 145 mm Stepless cutting speed: 20 - 90 m/min Saw blade: 2645 x 27 x 0.9 mm Working height, approx.: 990 mm Coolant pump: 100 W Saw motor: 1.5 kW Electrical connection: 230 V Dimensions (LxWxH), approx.: 1600 x 1100 x 1500 mm Weight, approx.: 295 kg Features: - Double mitre saw with pivoting saw frame from left -45° to right +60° - Generously dimensioned cast saw arm for low-vibration operation - Infinitely variable saw speed for optimum adjustment to the workpiece - Hydraulic lowering cylinder, infinitely adjustable - Quick-release vice for easy and fast workpiece clamping - Precise, adjustable saw band guides for optimal cutting results - CE/IEC compliant, German documentation and German service Scope of delivery: - Bi-metal saw blade - Blade tension adjustable via manometer - Carbide blade guides - Quick-release vice - Material stop Blodpfxeqbr Suj Abbsr - Coolant system incl. pump - Hydraulic lowering cylinder - Motor protection switch - Automatic shut-off at end of cut - Base frame

Condition: used, Year of construction: 1982, From business liquidation: Ulmia 1710S Year of manufacture: 1982 Mitre cuts up to 45° Maximum cutting height at 90°: 75mm – at 45°: 50mm Saw blade: 250mm Table size: 630x500mm Bledpfxoxq N T Eo Abbor 380 Volt Cutting width to the right of the saw blade: 650mm The machine is operational, but shows heavy signs of use!

Condition: used, Technical details: saw blade diameter: 420 mm cutting lenght max.: 5000 mm cutting range: H x B: 180 x 100 mm Bledpfx Absu Nigwebor air pressure - required: 6 bar mitter cutting - both sides: 45° - 90° (manuell) ° voltage: 380 / 220 V total power requirement: ca. 8,0 kW weight of the machine ca.: auf Anfrage t dimension machine xH: 6,4 x 1,3 x 2,0 m Circular saw with 2x sawhorses for cutting profiles with inclined cuts up to 45°. microprocessor positioning control BECKHOFF E 70-300 with absolute encoder, digital display travel per saw block = 2350mm, motorized Clamping cylinder for each horizontal and vertical, manual flushing device hydropneumatic feed use of carbide saw blades i.D. *

Condition: new, Machine in stock and immediately available Double Mitre Metal Band Saw S 255 DG Cutting capacity round / square 90°: 255 mm / 210 x 210 mm Cutting capacity flat 90°: 310 x 210 mm Cutting capacity round / square 45°, right: 220 mm / 210 x 210 mm Cutting capacity flat 45°, right: 220 x 200 mm Cutting capacity round / square 45°, left: 230 mm / 200 x 200 mm Cutting capacity flat 45°, left: 230 x 200 mm Cutting capacity round / square 60°, right: 135 mm / 135 x 135 mm Cutting capacity flat 60°, right: 135 x 135 mm Saw blade dimensions: 2750 x 27 x 0.9 mm Cutting speeds: 35 / 70 m/min Motor output S6 40%: 2.2 kW Working height: 930 mm Features: - Double mitre saw with swivelling saw bow from left -45° to right +60° - Ideal for machining pipes, profiles, and solid materials made of stainless steel, iron, etc. in commercial applications - Generously sized, cast saw arm for low-vibration operation - Two band speeds for optimal adaptation to the workpiece - Hydraulic lowering cylinder - Quick-release vice for fast, easy clamping of workpieces Bodod R Sipepfx Abbjlr - Precise, adjustable saw blade guide for optimal cutting results - CE/IEC certified, German documentation and German service Scope of delivery: - Saw blade - Material stop - Pressure gauge (band tension) - Carbide saw blade guides - Quick-release vice - Integrated coolant system - Hydraulic bow lowering - Motor protection switch - Automatic end stop - Base frame

Condition: good (used), Year of construction: 1991, From business liquidation: Ulmia 1710S Year of manufacture: 1991 Mitre cuts up to 45° Max cutting height at 90°: 75 mm – at 45°: 50 mm Saw blade: 250 mm Bedpfx Aboxqrwtobelr Table size: 630x500 mm 380 Volt Cutting width to the right of the saw blade: 650 mm Motor brake

Condition: used, Technical details: Saw blade diameter: 400 mm cutting diameter: 140 mm hole of sawblade: 50 mm saw blade rpm: 6 / 12 / 24 / 48 U/min cutting range 90 degrees: round: Ø 140 mm Blodpfx Abeu Niuzober cutting range 90 degrees: square: 130 x 130 mm cutting range 90 degrees: flat: 370 x 30 / 315 x 70 / 265 x 95 mm Table dimensions: Ø 700 mm table rotating: 360 Grad clamping capacity: 8 - 30 bar electrics - voltage/frequency: 400 / 50 V/Hz air-pressure connection: 6 - 8 bar total power requirement: 3,6 kW weight of the machine approx.: 1170 kg dimensions of machine: T: 1,5 x B: 1,0 x H: 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE Profile circular saw with two-hand control (underfloor saw) for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Mitre cut 30° to 90° Operation Control panel and two-hand operation Material clamping (opening width) adjustable with return stroke Saw blade feed speed adjustable Without coolant system *

Condition: new, Cutting range: round 0°: 270 mm square 0°: 260 x 260 mm flat 0°: 320 x 260 mm round 45° R: 230 mm square 45° R: 220 x 220 mm flat 45° R: 230 x 150 mm round 60° R: 140 mm square 60° R: 140 x 140 mm round 45° L: 200 mm square 45° L: 175 x 175 mm flat 45° L: 220 x 150 mm Cutting speed: 40 / 80 m/min Saw blade: 2925 x 27 x 0.9 mm Working height: 975 mm Coolant pump: 100 W Saw motor: 1.9 kW Voltage: 400 V Dimensions LxWxH, approx.: 2000 x 1300 x 2000 mm Weight, approx.: 550 kg Features: - Double mitre saw with swivel saw arm from left -45° to right +60° - Ideal for cutting pipes, profile material and solid material made of VA, iron, etc. in commercial applications - Generously dimensioned cast saw arm for low-vibration work - With 2 saw blade speeds for optimum adaptation to the workpiece - Hydraulic lowering cylinder - Quick-clamping vice for quick and easy workpiece clamping - Precise, adjustable saw blade guide for optimum cutting results - CE/IEC, German documentation and German service Scope of delivery: - BiMetal band saw blade 2925 x 27 x 0.9 mm - Band tension adjustable via pressure gauge - Carbide guides - Quick-clamping vice - Material stop Blsdpsiqt Rlefx Abbor - Coolant device with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic switch-off at the end of the cut - Underframe

Year of construction: 2007, condition: used, Technical details: saw blade diameter: Ø 400 - 450 mm hole of sawblade: Ø 50 mm revolution per minute: Spindel: 6 / 12 / 24 / 48 (2 step) U/min revolution per minute: Motor: 1400 / 2800 U/min cutting range 90 degrees: round: Ø 150 mm Blsdpfx Asu Nimqsbbor cutting range 90 degrees: square: 140 x 140 mm cutting range 90 degrees: flat: 400x30 / 345x70 / 300x95 mm table-size: Ø 700 mm table rotating: 360 ° air-pressure connection: 6 - 8 bar total power requirement: 3,6 kW weight of the machine approx.: 1900 kg dimensions of machine: T:1,5 x B:1,0 x H:2,35 m CIRCULAR SAW SEMI-AUTOMATIC - PROFILE CIRCULAR SAW MACHINE - UNDERFLOOR SAW Profile circular saw with two-hand control for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Mitre: 30° - 45° - 90° Operating pressure/clamping pressure: 50bar / 30bar adjustable Hydraulic pump 2.2 kW power output Coolant system with pump Operation via control panel / two-hand operation *

Condition: used, Technical details: saw blade diameter: 250 mm grinding wheel hole diameter: Ø 25 feed - manual: per Hand mm Cutting height: max. 70 mm Bjdpsu Nif Tefx Abbolr current: 8,5A / 50Hz / 220V A/Hz/V table-size: L:520 x B:500 mm dimension machine xH: 0,6 x 0,6 x 0,9 m Sale at sales price as spare parts dispenser, non-functional no UVV conformity (accident prevention regulations) *

Condition: used, Technical details: Saw blade diameter: 350 mm cutting range 90 degrees: round: 110 mm Bljdpfou Nilyox Abbsr cutting range 90 degrees: square: 85 x 85 mm cutting range 90 degrees: flat: 180 x 85 mm cutting range 45 degrees: round: links/rechts: 105 / 110 mm cutting range 45 degrees: square: links/rechts: 85 x 85 / 85x85 mm cutting range 45 degrees: flat: links/rechts: 130x85 / 130x85 mm hole of sawblade: 40 mm range of revolutions per minute - continous: 9 / 18 / 36 / 74 / 4step U/min rotary table: Ø 400 mm/min table swivelabel +/-: 60° rechts und 45° links ° air-pressure connection: 7 bar total power requirement: ca. 2,2 kW weight of the machine approx.: 430 kg dimensions of machine: B: 0,7 x T: 1,01 x H: 2,1 m The circular saw is an electro-hydro-pneumatic semi-automatic circular saw with which miter cuts of up to 45° inwards or 60° to the right can be made on profiles and solid materials. Vertival circular saw Solid, heavy cast construction max. opening of the vice 180mm cutting counter vertical travel of the saw head: 200mm Vice opening width max. 180mm (jaw size W:220 x H:70mm) Operation via control panel *