Used Double Belt Press for sale (42,622)

Condition: used, Year of construction: 1979, pressure 160 t distance between columns 1620 mm stroke 600 mm Distance table/ram, stroke up 800 mm table surface area 1600 x 1100 mm table height over floor 750 mm die cushion pressure in table 63 t die cushion stroke in table 180 mm Die cushion area in table 1300 x 750 mm side window 600 mm ram surface 1600 x 1100 mm oil volume 1160 l power requirement 30,0 + 16,0 kW weight 23,6 t dimensions (WxDxH) 2,9 x 2,3 x 4,65 m Height above floor 4,26 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table No foundation pit necessary can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F Gedpjvut Ryofx Ah Heui Video at seller's site before dismantling available

Condition: used, Year of construction: 1997, pressure 0630 t stroke 300 mm no. of strokes 10- 75 Hub/min table-size 3600 x 2200 mm passage width 4000 mm ram surface 3600 x 2200 mm column travel -side 2000 mm ram adjustment 150 mm shut height (stroke down, adjustm. up) 1000 mm voltage 400 V height over floor 7600 mm Depth of Press under floor 2500 mm total power requirement 160 kW weight of the machine ca. 225 t dimensions of the machine ca. 750 m² Gjdewx R Rdspfx Ah Heui Complete feeding line comes with the machine. It works on a material width of 300- 1600 mm and a thickness of 0,5- 3 mm. Machine has two working tables which move in and out to the front. To the side machine has a stacking device with two pallets. It also has two stacking pallets to the backside. Machine has a Coil charging device of 3 Coils with 25 t, a decoiler Schnutz, a material feeder, a straightening machine and a roll feeder.

Year of construction: 2025, condition: new, Nominal capacity 3000kg/h (depending on fruits & operating condition, up to 6000kg/h) Guodpfx Ajygmwjh Hji Yield up to 75% Belt width/length: 1000mm/approx. 7000mm Working width/high: 900mm/0-50mm continuously Belt speed continuously variable 1,0-5,2m/min Electrical supply: Drive motor 2,2 kW 400V Washing motor: 0,25 kW 400V Waterconsumption for belt cleaning: Approx. 3 l/operating minute Weight approx. 2300kg Dimensions: (lxwxh) 2750x1890x1690mm without high-pressure cleaner and without compressor

Year of construction: 2025, condition: new, Our belt presses are equipped with two large pressing rollers that extend the pressing process, ensuring particularly gentle juice extraction. The result is a clear, foam-free juice of high quality. The pneumatic belt tension and automatic belt control guarantee consistently high quality throughout the entire pressing process. The belt press features an automatic brush cleaning system, eliminating the need for a high-pressure cleaner. The belt is cleaned by six specially designed water nozzles. For cleaning, only a compressor with 8 bar pressure and a ½” water connection are required. Thanks to these special nozzles, water consumption is reduced, leading to lower operating costs. The open design allows for quick and uncomplicated cleaning, which can be completed in just a few minutes. Technical Information: • Nominal capacity: 950 kg/h • Power requirement: 1 kW, 400 V, 16 A • Material: WNr. 1.4301, AISI 304 stainless steel • Compressed air requirement: 50 l/h at 6 bar • IP65 electronic control cabinet Guedpfx Ahov Sq S Nj Hoi • Juice yield: Up to 75% • Fully automatic and stepless control of belt speed • User-friendly • Easy to clean • Rollable machine feet Dimensions: Length: 2230 mm Width: 1450 mm Height: 1250 mm Loading height: 1240 mm Pomace discharge height: 500 mm Juice outlet height: 370 mm Weight: 540 kg Optional: Juice collection tray ISW 100 Automatic juice discharge

Condition: new, pressure 500 t column daylight 600 mm stroke 600 mm Gjdpfx Ahefv Awhs Hsui table surface area 3500 x1500 mm 600 mm feed down 8 mm/sec feed up 16 mm/sec travel on the bed 2200 x 900 mm total power requirement 30 kW weight of the machine ca. 28 t 2. STANDARD EQUIPMENT FRAME - Welded steel frame - Frame and plates are precision-milled using a CNC milling machine - Chrome-plated cylinder - Worktop with threaded holes HYDRAULICS - Bosch Rexroth hydraulic pump - Hydrapack or Badestons hydraulic directional control valve - Hydraulic block in accordance with EN standards - 1000-liter hydraulic oil tank - Pressure adjustment via pressure transmitter/regulator ELECTRICS - Control cabinet in accordance with EN standards - All cables are labeled and clearly arranged - All electrical components are from Siemens CONTROL PANEL - Stroke control in any position - X, Y, and Z-axis movement via remote control - Stroke adjustment via sensor SAFETY - The machine complies with the EC safety standards 2006/42/EC Machinery Directive, EN ISO 16092-01 and 16092-03 - Two-hand operation - Emergency stop button - Safety rope with switch around the press 4. TRANSPORT AND INSTALLATION – The price includes transport costs, installation, and training at the customer's factory. – Hydraulic oil is not included in the price. – All handling costs (e.g., crane, forklift, etc.) are borne by the buyer. 5. WARRANTY – The machine has a 2-year manufacturer's warranty. – This warranty covers the delivery of all spare parts required for repair and service of the machine. Damaged parts will be returned to the manufacturer after replacement with a new part. – This warranty does not cover parts damaged due to improper use.

Condition: used, Year of construction: 2002, Manufacturer: Schuler Gräbener Press force: 400 t Stroke rate: 20-100 1/min Stroke adjustment: 66-203 mm Shut height: 700 mm Slide adjustment: 150 mm Guedexcgwxepfx Ah Hsi Table area: 3,200 x 1,200 mm Slide area: 3,200 x 1,200 mm Coil line: Manufacturer: Schuler Automation Coil width: 100 - 1000 mm Coil thickness: 0.7 - 5.0 mm Decoiler load capacity: 8,000 kg

Condition: used, Year of construction: 1991, pressure 200 t distance between columns 1100 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 1100 mm table surface area 1000 x 1000 mm pressure of drawing cushion in table 63 t stroke of drawing cushion in table 250 mm die cushion area 800 x 750 mm Gjdsvzxqrspfx Ah Hjui table height over floor 800 mm ram surface 1000 x 1000 mm Speed down 400 mm/s speed up 250 mm/s working speed 22 - 56 mm/s power requirement 45,0 kW weight 24,0 t dimensions (WxDxH) 2,4 x 1,5 x 5,9 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, ram interlocking, two-hand operation as is where is, WITHOUT putting into operation Price for commissioning (in given condition respectively with new electric control) on request

Condition: used, Double-column hydraulic press SCHÖN Type UTE/B 50 Machine No. 5509, Year of manufacture 1971 Pressure capacity 50 tons Column width 550 mm Column side clearance 150 mm Table surface 480 x 380 mm Table opening Ø 70 mm Ram surface 490 x 280 mm Clamping pin bore Ø 40 mm Max. ram stroke 150 mm Max. installation height 390 mm Table height above floor 890 mm Rapid forward speed approx. 130 mm/sec. Working speed approx. 20 mm/sec. Return speed approx. 130 mm/sec. Motor power: 4 kW Power supply: 380 volts, 50 Hz - Continuous press force adjustment - Rapid stroke and working stroke Gusdjv Srfwspfx Ah Hji - Pressure- or stroke-dependent stroke limitation - Adjustable pressure hold time, press time extension 0.5-6 seconds - Mechanically adjustable fixed stop via handwheel on the ram - SICK light barrier, type LVU - Stroke counter - Double column guide on the ram Space requirement: L x W x H: 1100 mm x 1050 mm x 2320 mm Weight: approx. 1.5 tons Good condition

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, total length: 33,500 mm, input voltage: 415 V, type of input current: AC, Equipment: documentation/manual, BYSTRONIC / LENHARDT 4000 x 1600, IGU Line – Double Gas Press + Robot Autom. IGU Glass Production Line, h=1,6 m Double Gas Press, Sealing Robot | Right – Left Max. glass sizes: 4000 x 1600 mm, Year: 2004 Godpfx Ahsxf Hm Sj Houi – Washing and Drying Machine (8 brushes) with Inlet and Outlet Conveyor, Blower, – Frame Mounting Station, – Autom. Double Gas Press, – Sealing Robot, – Inlet and Outlet Conveyors. In good working condition. Inspection is possible by appointment. Available: NOW

Year of construction: 2025, condition: new, Our belt presses can be dismantled and cleaned in just a few minutes without tools. The belt press is easy to operate. Effective belt cleaning is achieved by three spray nozzles and silicone wipers. Thanks to this innovative solution, the system can be operated for the economical production of fruit and vegetable juice. You don’t need a high-pressure cleaner, so you save on electricity costs when pressing. All you need is a compressor with 8-bar pressure and a ½" water connection. • Fully automatic and infinitely variable belt speed control • Easy to clean • Easier maintenance • Rolling machine feet • Automatic belt correction Technical Information Rated output: 350 kg/h Working width: 400 mm Juice yield: up to 75% Power consumption: 0.55 kW, 400 V, 16 A Material: Wnr. 1.4301, AISI 304 stainless steel Air Operating pressure: 6 bar approx. 50 l/h Gsdov Sq Nbepfx Ah Heui Dimensions: Length: 1,080 mm Width: 1,070 mm Height: 1,320 mm Weight: 297 kg Optional: automatic juice draining

Condition: new, pressure 300 t working feed 3-8 mm/sec stroke 500 mm return speed 15 mm/sec table-size 3000 x 1500 mm tank capacity 45 l travel x / y 2600 x 1000 mm daylight 500 mm total power requirement 18,5 kW Guodsvxw Hmjpfx Ah Hei weight of the machine ca. 18 t

Condition: used, It was used for extracting juice from apples. Belt width: 200 cm, capacity approximately 16 tons/hour, juice yield 60–78% depending on the quality of the raw material. Gusdpsxn Uluefx Ah Hsi

Condition: used, Year of construction: 1993, pressure 315 t distance between columns 1660 mm stroke 400 mm Gusdpfsvuuhmox Ah Hoi Distance table/ram, stroke up 600 mm Table surface area 1600 x 1000 mm table height over floor 960 mm Die cushion pressure in table 80 t Die cushion stroke in table 200 mm Die cushion area in table 950 x 650 mm Side window 720 mm Ram surface 1600 x 1000 mm Oil volume 1400 l Power capacity 57,0 kW Weight 30,0 t Dimensions (WxDxH) 3,0 x 2,9 x 4,4 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Eccentric punch press HAULICK + ROOS type RVD 125 double column - eccentric press Machine No. 212560 Year of construction 1981 pressure force 125 ton. table size 880 x 800 mm table opening 470 x 140 mm Gusdohlnzkjpfx Ah Hoi column width 900 mm column width lateral 415 mm ram stroke 45 mm slide adjustment travel 0-80 mm Installation height on the picture 340 mm Stroke rate 50 to 300 strokes/min. Motor power main drive 22 kW Mains connection 380 volt, 50 Hz - Double connecting rod drive with 4-fold eccentric shaft for off-center ram pressure load - adjacent electrical cabinet - NC roll feed EBU, width 250 mm, year 2003 - adjacent control panel for roll feed - strip running direction from left to right space requirement (press) L x W x H 3000 x 2000 x 3020 mm transport height 2950 mm weight of the press approx. 11 ton.

Condition: used, pressure / t distance between columns / mm stroke / mm This ram was dismantled from the MAE HY S 315s press Gsdpjn Uzbrofx Ah Hsui Data from the machine to which Ram belonged: Press pressure devi. 315,000kg pressure up Ram stroke 800 mm Projection / table depth 720 mm Installation height 800 mm Table width 1200 mm Table height 1200 mm Total height / width / depth 4200 mm / 2200 mm / 4350 mm Weight 30 tons Machine body as seen on the low loader is 4 tons It's just the pestle!!!

Year of construction: 2025, condition: new, Our systems can be dismantled down to the base frame in just a few minutes for effective cleaning. Our belt presses are suitable for pressing fruit and vegetables. Effective belt cleaning is done with the help of brushes and a belt washing system. You only need an air compressor to operate the system. Technical Information Guodsv Sq Rxepfx Ah Hoi • Rated output: 650 kg/h • Power consumption: 1 kW, 400 V, 16 A • Material: Wnr. 1.4301, AISI 304 stainless steel • Compressed air requirement: 50 l/h 6 bar • IP65 electronic control cabinet • Juice yield: Up to 75% • Fully automatic and infinitely variable belt speed control • Operator friendly • Easy to clean • Rolling machine feet Dimensions: Length: 2,230 mm Width: 1,250 mm Height: 1,250 mm Height assumptions: 1,240 mm Height of pomace discharge: 500 mm Height of juice outlet: 370 mm Weight: 480 kg Optional: Juice collection tank ISW 100 Automatic juice draining

Condition: used, Year of construction: 1993, pressure 315 t distance between columns 2350 mm distance table/ram, max. stroke up, adjustment up 1200 mm distance between cutting impact cushioning 1600 mm Distance table/ram, stroke up 1200 mm stroke 800 mm table surface area 2060 x 1260 mm table height over floor 750 mm Die cushion pressure in table 100 t Die cushion stroke in table 400 mm Gujdovuugvepfx Ah Hji die cushion area 1250 x 1000 mm side window 780 mm ram surface 2200 x 1500 mm Capacity of ejector in ram 63 t speed down 500 mm/s speed up 310 / 410 mm/s working speed 20 - 73 mm/s quantity of oil 3900 l power requirement 80,0 + 45,0 kW weight 55,0 t Dimensions (WxDxH) 4,6 x 2,7 x 7,2 m Height above floor 6,0 m Height below floor 1,2 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic ejector in ram, hydraulic cutting impact cushioning, hydraulic ram interlocking can be offered without putting into operation (partly dismantled, in need of overhaul) or alternatively with overhaul and new control Siemens S 7-1500 F

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 pressure force 200 ton. Stand passage front 2050 mm column passage sideways 2030 mm table area 2800 x 2000 mm ram area 2000 x 2000 mm ram stroke 700 mm installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Gedpfx Aodzp Tceh Houi Motor power main motor 75 kW Motor power control pump 11 kW Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation - central lubrication - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. good condition

Condition: used, Year of construction: 1993, pressure 315 t distance between columns 2060 mm stroke 700 mm Distance table/ram, stroke up 1100 mm Table surface area 2000 x 1000 mm Die cushion pressure in table 125 t Die cushion stroke in table 200 mm die cushion area 1200 x 600 mm Table height above floor 750 mm table height over floor (if standing without pit) 1100 mm Side window 720 mm Ram surface 2000 x 1000 mm Oil volume 1800 l Godpsvuudzefx Ah Hsui Power capacity 90,0 kW Weight 35,0 t Dimensions (WxDxH) 3,6 x 2,75 x 5,65 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, cutting impact cushioning (with motoric depth adjustment) No foundation pit necessary can be offered without putting into operation (without operator’s console / screen) or alternatively with new control Siemens S 7-1500 F, with new operator’s console / screen and new user interface

Condition: used, Double column eccentric punching press BLEMA Gotha type PEZ 160-50 MHSY-ES Eccentric press with roller feed ALBA Machine no. No. 88151005 Year of construction 1988 / 92 Pressure force 160 ton. Frame width 970 mm Stand width sideways 560 mm Table size 900 x 900 mm ram surface 900 x 700 mm Tool installation height 560 mm, max. 700 mm Stroke adjustment 8-160 mm Ram adjustment travel 125 mm Stroke rate 25 to 70 strokes/min. Belt width in roller feed max. 400 mm Motor power approx. 15 kW Mains connection 380 Volt, 50 Hz - Infinitely variable stroke rate via frequency control - Automatic stroke adjustment - ram weight compensation cylinder with compressed air - Hydraulic overload protection in the ram - Pneumatic clutch/brake combination - Central oil lubrication - Precisely guided press ram with oil-lubricated guides - UNIDOR press control - Swiveling control panel - Press and feed control cabinets, together on one platform, adjacent Platform dimensions 3400 x 2250 mm, height without feet 2950 mm Width of the press without feed 2100 mm Depth of the press with drive motor 2300 mm Overall height of the press 4150 mm Weight of punching press approx. 18 tons. For transportation, the drive motor is removed and the machine is placed on its face. In addition: NC roll feed straightening machine ALBA type GGVHY400 Apparatus no. 1405 and 1406, order no. 910708 (year of manufacture 1992) - ALBA PSS 300 feed control - Feed length infinitely programmable from 0.1 to 6500 mm per stroke - Belt thickness at 400 mm width max. 3 mm - Belt thickness for 300 mm width max. 4 mm Gsdodzqlvepfx Ah Houi - Belt cross-section max. 1200 mm2 - Roller drive hydraulically controlled by the feed - Height-adjustable feed unit on the press to adjust the material infeed height - Hydraulic unit opposite - Drag straightener with hydraulic opening and closing Weight of the complete system approx. 24 tons Space required for transport a mega trailer with an internal height of 3 meters and a loading length of 13.6 meters good condition

Condition: used, Year of construction: 1973, pressure 500 t Godjvuk Euepfx Ah Heui distance between columns 1620 mm stroke 40 - 160 mm no. of strokes 32 / 48 Hub/min dayligth (stroke and adjustment up) 660 mm column travel -side 400 x 430 mm table surface area 1600 x 1300 mm table height over floor 750 mm ram surface 1400 x 1200 mm power requirement 44,0 / 66,0 kW weight of the machine ca. 56,00 t required space 3,55 x 2,55 x 5,1 m with pneumatic clutch/brake combination (Desch), mechanical overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment as is where is, WITHOUT putting into operation Video of 'sister maschine' available

Condition: used, Machine not operational – control system not running Special price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Serial No. 300487 Year of manufacture: 2006 Pressing force: 500 tons Column gap front and rear: 2520 mm Table surface: 2500 x 2500 mm Ram surface: 2500 x 2500 mm Ram stroke: 600 mm Installation height max.: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1000 liters Ram retraction force: approx. 22 tons Adjustable approach speed: 100-800 mm/s Pressurization to 5000 kN: approx. 0.7 sec. Return speed: approx. 300 mm/s Main motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-position flat guide for the ram - Hydraulic ram locking at TDC - Freestanding control cabinet (200 x 50 cm) - Siemens PLC control S7-314 - Operation via Siemens OP 170-B (5.7”) - Two-hand control desk, freestanding - Floor-level installation - Table plate 2510 x 2530 x 135 mm (approx. 6700 kg) - Central lubrication - Operating manual with circuit diagrams Gedsdzqptspfx Ah Hsui Required space (L x W x H): 372 x 260 x 460 cm Required space for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons The machine was used for straightening heated steel flanges. From insolvency – in good condition.

Condition: used, Year of construction: 2010, pressure 600 t distance between columns 3640 mm stroke fix 350 mm no. of strokes 11 - 44 /min dayligth (stroke and adjustment up) 1550 mm column travel -side 2200 mm Gedpfjvut Dyex Ah Hjui table surface area 3600 x 2500 mm ram surface 3600 x 2500 mm ram adjustment 400 mm band width 2000 mm material thickness 0,6 - 2,5 mm material cross-cut 1600 x 2,5 mm² coil weight 35,0 t Number of Straightening rolls 13 0 straightening roll diameter 50 mm Blanking Line (press, coil line, blank stacking system) yom 1993 - 2010: new control Siemens S 7 - press Schuler type EBS 4-600 with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking moving tables (2x) without rails for the moving tables - decoiler make Schleicher, type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll - coil lifting device - extractor device make Schleicher - shear - straightening machine make Schnutz, type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls - coil loop bridge - roll feed make Schleicher, type WV-SYS-A 160-2000, yom 1994 - blank stacker NSM-Magnettechnik stored in dismantled condition - Video before dismantling available

Condition: used, Double-column hydraulic press SCHÖN Type SH 25 Machine no.: 4453 Year of manufacture: 1999 Pressing force: 25 tons Column width: 500 mm Lateral column clearance: 120 mm Table surface: 440 x 320 mm Table opening: Ø 175 mm Ram surface: 360 x 220 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 100 mm Max. installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Connection voltage: 380 V, 50 Hz Equipment: - Safety light curtain SICK, type FGS 300-11 Gujdpfxsw A Amre Ah Hji - Two-hand operation - Stroke counter - Rapid and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Pressing force regulation - Adjustable pressing time 1–10 s (pressure holding time) - Adjustable return stroke speed - Blow-off device electrically pre-wired, without air valve - Manual hydraulic tool safety, adjustable via handwheel Dimensions (L x W x H): 1300 x 1200 x 2200 mm Weight: approx. 1200 kg Good condition

Condition: used, Double-column hydraulic press RASTER ZEULENRODA (WALTER) Type WUP-S 60 Mach. No. 707, built in 1994 Pressure capacity 60 tons Godev Srfdopfx Ah Houi Column width 1090 mm Side clearance 275 mm Ram surface 890 x 540 mm Table surface 990 x 540 mm Max. ram stroke 300 mm Installation height 390 mm Table height above floor 900 mm Hydraulic operating pressure 250 bar Rapid downward speed 47 mm/s Rapid upward speed 75 mm/s Working speed 15 mm/s Return speed 37 mm/s Motor power 15 kW (2 x 7.5 kW) Power supply 400 volts, 50 Hz, 15.85 kW - SICK light barrier, type LVS 600 - Manually adjustable limit switch cams for stroke limitation - Press force adjustment via handwheel - Continuous press force holding time adjustment - Two-hand operation on the machine - Additional ram plate Guided by two lateral guide rods, Ø 50 mm - Table top with 18 mm T-slots, slot spacing 185 mm - Table top through hole Ø 100 with insert reduction to Ø 30 mm - Ram plate with 40 mm bore and clamping screw - Electrical cabinet on the side of the machine stand - 3 monitored safety valves for the hydraulic system - Accident prevention regulations for manual insertion work - Electrical circuit diagram Space requirement L x W x H 1900 x 1350 x 2570 mm Weight 3.1 tons Good condition