Used Dnc for sale (147)

Year of construction: 2007, condition: ready for operation (used), - USED - 3 AXIS CNC HYDRAULIC GUILLOTTINE SHEAR CUTTING LENGTH: 3100 mm MAX CUTTING THICKNESS: 16 mm THROAT DEPTH: 350 mm BACK GAUGE TRAVEL: 1000 mm STRIKES FOR MINUTE: 7-12 MOTOR POWER: 30 kW CONTROL UNIT: CYBELEC DNC60 No OF PLATE HOLDERS: 14 Prjdsxl H Ntepfx Ag Djd WEIGHT: 18700 Kg OVERALL DIMENSIONS: 4150 x 2200 x 2350 mm

Condition: excellent (used), Year of construction: 1998, pressing force: 125 t, Hydraulic press brake Fab. EHT Typ. VARIOPRESS 125-3550 Year 1998 Technical data Make: EHT Type: Variopress 125-3550 Year of construction: 1998 Capacity: 125 t Effective length: 3550 mm Machine column: 2550 mm Projection: 300 mm Stroke: 240 mm Installation height: 640 mm Oil volume 250 L Dimensions: approx. L 3.90 x W 1.80 x H 3.00 m Weight: approx. 12 t Equipment - Control system: Cybelec DNC 80 2D graphics - Automatic upper tool clamping - Lower tool clamping 90mm and 13mm - controlled axes: Y1, Y2, X1, X2, R, Z1, Z2 - motorized crowning - 6 x V block die length 3,500, segmented: with V12/30°, V40/80°, V24/80°, V10/30°, V24/30°, V16/30° - Punch straight, H 350mm / approx. 70°, length 3060 mm, segmented All data without guarantee. Podpjr Epr Ujfx Ag Dsrd A demonstration under power is possible at any time in our exhibition hall.

Condition: new, functionality: fully functional, Year of construction: 2004, Pressing force: 225 t Bending length: 3050 mm Distance between uprights: 2550 mm Control type: DNC 1200PS Eco/Col Ram stroke: 700 mm Throat depth: 405 mm Distance table/ram: min. 320 / max. 1020 mm Total power requirement: 29.5 kW Machine weight approx.: 15,500 kg Accessories/Equipment: Rear gauge Backgauge traverse adjustment: - X-axis gauging range (from bending line): 5–1000 mm - X-axis adjustment speed: max. 500 mm/sec Pjdpfx Aoxb Tftsg Djrd Height adjustment: - R-axis adjustment range (from table surface): 85–235 mm - R-axis adjustment speed: max. 150 mm/sec Backgauge finger adjustment: - Z1-axis adjustment range (from left table front): 520–2365 mm - Z1-axis adjustment speed: max. 1000 mm/sec - Z2-axis adjustment range (from left table front): 690–2535 mm - Z2-axis adjustment speed: max. 1000 mm/sec - X1-axis adjustment range (from center line): ± 125 mm - X1-axis adjustment speed: max. 250 mm/sec Die shifting – adjustment via rear gauge (MVX): - Adjustment range: max. 100 mm - Adjustment speed as per X-axis: 500 mm/sec Front support/press brake aides: - Swivel angle BV1/BV2-axis: 55° - Swivel speed BV1/BV2-axis: max. 45°/sec - Lifting force per swivel arm BV1/BV2-axis: max. 1,500 N

Year of construction: 1992, condition: used, machine/vehicle number: 207320; Lg-Nr. 09361, Technical data: - max. working length 1250 mm - bar passage 1050 mm - max pressing force 80 t - stroke 250 mm - bar overhang 300 mm - max. installation height between table and press beam 560 mm - lifting speeds - down speed idle max 100 mm/sec. - Up speed 100 mm/sec - Pressing speed max. 12 mm/sec. - Total drive power 15 kW - space requirement approx. W 1750 x H 3400 x D 2000 mm - Weight approx. 8500 kg - with: - CNC - control CYBELEC DNC 7400 PSGY - controlled X - axis back gauge 5 - 1000 mm Prodsb Rk Ekjpfx Ag Dsd - Z - axis pneum. height adjustable in three steps - manually movable and foldable stop fingers - controlled pneumatic die displacement - hydr. tool clamping - manual crowning - 2 pieces support arms - sharpening tool divided H 320 x L 1000 mm - deer foot tool H 320 mm x L 1000 mm - universal die L 1000 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Cybelec, controller model: DNC 880, bending force (max.): 175 t, working width: 3,050 mm, stroke length: 265 mm, installation height: 530 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, number of axes: 4, table height: 900 mm, type of crowning: CNC-controlled, oil tank capacity: 200 l, travel distance X-axis: 650 mm, back gauge adjustment: CNC-controlled, back gauge travel distance R-axis: 250 mm, overall weight: 11,250 kg, total length: 4,570 mm, total width: 2,360 mm, total height: 2,900 mm, power: 18.5 kW (25.15 HP), Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, electro-hydraulic CNC press brake - Two synchronized cylinders with HIGH PERFORMANCE hydraulic components - Equipped with CYBELEC CNC control unit - DNC 880S - * 2D graphic display for visualization and multi-stage simulation * Graphic 2D programming * User-friendly operation * Automatic bending sequence calculation and collision detection * Extensive product and tool library * Automatic tonnage (pressure) calculation - Swiveling operator panel mounted front right - CNC controlled axes: Y1 + Y2 + X + R + CNC crowning - Upper beam with heavy-duty four-guide system - CNC electric backgauge (X axis) * with 2x manually adjustable backgauge fingers * Adjustment range up to max. 650 mm - CNC electric height adjustment of backgauge (R axis) * Adjustment range up to max. 250 mm - CNC electric table crowning - AMADA/PROMECAM upper tool clamping * incl. segmented upper tool set - AMADA/PROMECAM lower tool holder, incl. die * incl. segmented single-V die (V=20 mm) - FIESSLER LASER safety device at the front - 2x front, movable support arms (sliding system) - Side safety enclosure (pivoting doors) Podpfx Agoxlizxs Derd - Rear safety enclosure (pivoting door) - 1x movable foot switch - Large hydraulic oil tank to maintain low operating temperature - Original operating manual

Condition: used, pressure 125 t chamfer lenght 3550 mm distance between columns 3050 mm stroke 250 mm table width 120 mm table height 900 mm column arm 320 mm return speed 100 mm/sec working feed 10 mm/sec control Cybelec DNC 70 quantity of oil ca. 250 l total power requirement 11 kW weight of the machine ca. 11 t dimensions of the machine ca. 4 x 2 x 3 m * new control Cybelec CypTouch 12 - 3 axes * Hydraulic tool clamp * Crowning * Swivel control, right front * free-moving foot control * lateral protective device (protective grille) Prjdpfxokpwubs Ag Djd * rear protective device (protective grille) Machine is available in about 1-2 months !!

Condition: ready for operation (used), Year of construction: 2005, - USED - TUBE BENDING MACHINE AXIS: 3 MAX TUBE DIAMETER: 30X2 mm WORKING LENGHT: 3000 mm X-AXIS POSITIONING SPEED: 900 mm/sec Y-AXIS BENDING SPEED: 200 °/sec Prsdpfjvhc Uuex Ag Dsd Z-AXIS ROTATION SPEED: 360 °/sec MAX BENDING RADIUS: 20 A 170 mm CONTROL UNIT: DNC800

Year of construction: 2006, condition: ready for operation (used), General Data Measurements width 2550 mm Measurements depth 5450 mm Psdpfx Ajxnd Thsg Djrd Measurements height 3150 mm Machine weight 24500 kg Main Drive Pressing force 400 t Stroke 300 mm This ERMAK CNC HAP 4100x400 was manufactured in 2006. It features a CYBELEC DNC 60 control system, a maximum working length of 4100 mm, and a press force of 400 t. The internal distance between columns is 3550 mm, and it includes a laser safety system. Consider the opportunity to buy this ERMAK CNC HAP 4100x400 hydraulic press. Contact us for more information about this machine. Application Types Bending

Condition: good (used), functionality: fully functional, Year of construction: 2004, machine/vehicle number: 25084, working width: 6,100 mm, stroke length: 400 mm, pressing force: 250 t, TECHNICAL DETAILS Control: Cybelec DNC 800 CNC Number of axes: 4 (Y1, Y2, X and R) Pressing force: 250 t Working length: 6,100 mm Stroke: 400 mm MACHINE DETAILS Connection: 400 V Pressure: 290 bar Noise level: 65 dB(A) Weight: 24.5 t EQUIPMENT Prsdpfx Agsvzq Ups Dsd - Hydraulic CNC crowning for precise bending results - Includes 1 tool set

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1995, actuation type: hydraulic, controller model: CYBELEC DNC 880S, bending force (max.): 100 t, working width: 2,050 mm, overall weight: 8,000 kg, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Pressing force: 100 t Bending length: 2,050 mm MACHINE DETAILS Control: CYBELEC DNC 880S Dimensions & Weight Dimensions: 2,650 x 2,600 x 2,700 mm Weight: 8,000 kg Pjdpfx Agew Rcndo Dord EQUIPMENT Controlled axes: Y1, Y2, X, R, Z1, Z2, X1 Hydraulic Wila clamping (top) Motorized crowning

Condition: used, Year of construction: 2013, Suitable for automatic tooth flank grinding on both sides of carbide-tipped circular saw blades. Accesories: full fairing coolant system Automatic central lubrication. Measuring system for measuring saw blades. Control panel with LCD color display. DNC service. Alphanumeric keyboard. Grinding speed and grinding path depending on the tooth surface, can be adjusted as required. 2 grinding wheel mounts Coolant level monitoring Automatic grinding wheel compensation Prepared for robot operation with automatic loading door oil pan 2 x saw blade magnet holder >Ø 320mm, >Ø 180 mm 1 centering ring. Circular saw blade diameter: 200 - 840mm Circular Saw Bore Diameter: from 16 mm Tooth pitch: 6 - 180mm grinding path: up to 25 mm tangential relief angle: 0 to 10 degrees max. grinding wheel diameter: 125 mm Grinding wheel bore diameter: 32 mm Grinding spindle variable: 1600 - 5500 rpm, Connected load approx.: 8kVA (400V / 50Hz) Dimensions W x D x H =: 2770x1900x2045mm mass: approx. 4700 kg Prodpfxov Sbmqe Ag Ded colour: Gray

Condition: used, Year of construction: 1992, pressure 100 t chamfer lenght 3100 mm column daylight 2540 mm stroke 300 mm table height over floor 750 mm control DNC 90 total power requirement 8,6 kW weight of the machine ca. 8500 t Overall size ca. 3540x1240x2555 mm Machines type 391 Machine no.: 67 39130049 -4 controlled axes Prsdpfx Aewf Dyxog Djd -crowning -Extended back gauge -pneumatic matrix displacement -hydraulic upper tool clamping -various tools -Tool cabinet extra large stroke 300mm -various tools Machine does not have a valid UVV

Condition: used, Year of construction: 1980, pressure 200 t chamfer lenght 3000 mm distance between columns 2560 mm dayligth 450 mm throat 450 mm adjustment of stroke 240 mm horn length over column outer edge each 175 mm table length 3050 mm Pedpfx Aot Hllpog Djrd table width 280 mm table height over floor 820 mm electrics - voltage/frequency 220/50 V/Hz control CYBELEC, DNC60 stroke 250 mm operating pressure 150 bar weight of the machine ca. 15 t dimensions of the machine ca. L:4,0 x B:3,2 x H:3,44 m • hydraulical press brake, • new control CYBELEC DNC 60 • lower part of the machine moves down 500 mm to the floor, • at the moment the machine is mounted on a double-T-support; • prism and upper part of the machine in 3000 mm length

Condition: ready for operation (used), Year of construction: 2016, Control Unit Brand OKUMA Model OSP-P300S-H Movement Y-Axis Movement 160 Additional Equipment Y-Axis Machining Kit: Helical interpolation /Y-axis turning function with offset turning toolholders/ Coordinate conversion /Double pressure clamping system for main spindle chuck via M-codes (irreversible) /Double pressure clamping system for sub-spindle chuck via M-codes (irreversible) 60 tool ATC / High-pressure coolant preparation: 70 bar/ External coolant pump: 0.8 kW, 6 bar, 20 L/min/ Electric spindle orientation /Air blast for chuck cleaning Collision Avoidance System (CAS)/Chip Conveyor Preparation/Big Bore Spindle ASA 6": 22/15 kW, 3800 rpm/ High-precision C-axis positioning/ Continuous B-axis/ Tool Magazine with 60 positions/ 0.1 Micron Resolution Software/ API Library 2 for OSP-P300S/ Standard Right Side Chip Conveyor/ 15 Bar Coolant Pump 20 L/min/ Filtration unit with 4 fabric filter bags (25 micron), pump 15 bar, 20 L/min SCHUNK ROTA THW+260-81R A8 chuck with KITAGAWA SS1770 cylinder for Big Bore main spindle Predpfxjxg Umps Ag Dsd SCHUNK ROTA THW+215-66 A6 chuck with KITAGAWA SS1452 cylinder for sub-spindle 5-Axis Machining Kit: Super NURBS on 5 axes /Vector control /DNC-DT interface /Tool position control/ 3D coordinate transformation /Helical interpolation (includes inclined plane profile software) This 5-axis OKUMA MULTUS B300 II W was manufactured in 2016. It features an ASA 8 spindle offering 5,000 rpm and 65 mm bar capacity, capable of handling a max turning diameter of 630 mm. It includes a high-pressure coolant preparation of 70 bar, a continuous B-axis with HSK63, and a tool magazine with 60 positions, optimizing both turning and milling capabilities. If you are looking for high-quality turn-mill operations, consider this OKUMA machine. Contact us for more information about this machine. Application Types Turning

Condition: used, Year of construction: 1980, CNC-controlled press brake from Lotze Psdpfxovzwzvo Ag Djrd 200t pressing force 5500mm bending length Cybelec DNC880s CNC control Pilz light barriers including tools can be viewed under power

Condition: used, working width: 3,500 mm, Hydraulic press brake Manufacturer: HARTMANN, Model: AKP 30-35C Year of manufacture: 1994 Technical specifications Manufacturer: Hartmann Model: AKP 30-35C Year of manufacture: 1994 Capacity: 300 t Working length: 3500 mm Overrun distance: 4 mm Overrun time: 40 ms Safety distance: 64 mm Connected load: 30 kW Podjwucgijpfx Ag Dsrd Equipment • CYBELEC DNC 70 control system All information provided without guarantee. A demonstration under power can be arranged upon request. The company Hartmann is based in Germany (Frankfurt region). Today, Hartmann specializes in the repair and servicing of sheet metal processing machines.

Condition: like new (used), functionality: fully functional, cutting length (max.): 3,100 mm, cutting height with scoring (max.): 70 mm, saw blade diameter: 305 mm, feed rate X-axis: 40 m/min, feed rate Z-axis: 50 m/min, total length: 3,100 mm, total width: 3,100 mm, overall weight: 3,000 kg, power: 7 kW (9.52 HP), space requirement length: 3,100 mm, space requirement width: 3,100 mm, Equipment: rotational speed infinitely variable, scorer, Panel Sizing System SCHEER PA 4136 – 3100 x 3100 The PA 4136 is a high-performance, electronically controlled panel saw designed for precise, efficient, and automated cutting of wood-based materials. Ideally suited for industrial applications in joineries, furniture production, and panel processing. Condition & Service: Condition: Very good Functionality: Fully operational Warranty: 12 months CE-compliant and dust-tested (limit value < 2 mg/m³) Key Technical Data & Equipment: - Rip saw FM 20-3100 with hardened guides - Automatic forward & return travel of the saw unit (automatic lowering during return) - Feed drive via three-phase gear motor, frequency inverter controlled - Feed speed: 2 – 40 m/min (stepless) - Return speed (rapid traverse): 50 m/min - Extraction channels in machine base & pressure beam - Score saw blade adjustable externally (without opening the hood) - Safety hood locking with lamella curtain SZ 5008 - 3-step cutting height adjustment LA 4143 - 6 cut-out sections in the pressure beam for residual cuts down to 5 mm - Saw motor: 7.0 kW | Scoring motor: 1.1 kW (switchable) - Cutting length: 3100 mm | Cutting height: 70 mm Material Handling & Feed: - Angle pressure device WP 5003 with clamping claw for cross cuts - Adjustment range: 2400 mm - Fully automatic control via DNC-AT - Material feed table HP 5091 - 2 upper guides, rack-and-pinion guidance - Servo drive for material pusher - Feed speed: 25 m/min (safety limited) - Return: 40 m/min - 6 clamping fingers, 4 double roller tracks - Table length: 3100 mm | Fence depth: 3150 mm - Closed Pertinax surface in the area of the angle fence Control & Operation: - Operating system: Ubuntu Linux - Integrated PC with hard disk, parallel & serial interfaces - Network capable (LAN/WLAN), remote maintenance via internet (TeamViewer, Remote Desktop) - USB printing function Psdpfxowrn Efe Ag Dsrd - Multilingual dialog programming - 15" flat screen, multifunction keyboard on a swiveling control console - Graphic display of cutting plans and processes Software / Programs: - OPTIMAX: Office optimization, waste calculation, material requirements - OPTIMIN: Direct optimization at the machine PC with parts list entry - Processing via USB, diskette or online (optional) - Manual, automatic & special operation modes (e.g. grooving, veneered parts) Additional Equipment: - Angle fence table HP 5085: 1,720 x 800 mm | Pertinax overlay - Workpiece support table HP 5025: 1,720 x 800 mm | Pertinax overlay - Air cushion system LK 5030 integrated in both tables - Circular saw blade KSB 4005: Ø 305 mm, Z = 60 - Circular saw blade KSB 4006: Ø 200 mm, Z = 60, tapered Reliability in Continuous Operation: This machine is in use worldwide – under extreme conditions. Whether in the dry climate of Africa or in high humidity regions of Southeast Asia (e.g. Thailand): The PA 4136 runs reliably in 3-shift operations – 365 days a year – and stands out for its outstanding stability and durability. Warranty: We are so convinced of the quality and stability of our machines that we offer a 7-year warranty on the machine frame and guideways. (Excludes electronic supply parts and wear parts.) 📞 Contact us for an individual offer or to arrange a viewing appointment. Machine available from stock. Delivery, commissioning, and training available upon request.

Condition: used, pressure 50 t chamfer lenght 1500 mm distance between columns 1220 mm Control Cybelec DNC 1200 closing speed 95 mm/min working feed 1-10 mm/sec work stroke 156 mm overrun time 59 ms tracking travel 6 mm throat 200 mm distance table - lower edge of ram 301 mm table width 160 mm table height 850 mm x-axis 550 mm Pjdpfxjra Rrhs Ag Dsrd travel R-axis +/- 50 weight ca. 3600 kg a lot of lower and upper tools incl. work light

Condition: used, Year of construction: 2007, table length 500 mm table width 350 mm ampere 65 A Control AGIEVISION 5 CNC total power requirement 20 kW weight of the machine ca. 4000 kg dimensions of the machine ca. m A G I E (Switzerland) CNC - Controlled Wire Cutting EDM Machine Model AGIECUT PROGRESS V 3, Year 2007 Working range, X Y Z (=height) 500 x 350 x 426 mm Wire head, U-V axis (helical/taper cuts) + / - 30 °/ +/- 70 mm Resolution of axes 0.0001 mm Speed for positioning the axes up to 3 m/Min. Tolerances (If machine is new) 4 µ Workpiece dimensions, L x W x H max. 1.050 x 650 x 420 mm Max.weight of workpiece with/w.o. Dieelektricum 400/800 kg Clamping System Universal Beams with fixing holes Cutting wire Ø 0.2 – 0.33 mm Size of wire roll up to 25 kg Cutting speed of wire 60 – 300 mm/s. Total electrical load, approx. 20 kW - 400 V - 50 Hz Weight, approx. 4,000 kg Dimensions of machine approx. 2.4 x 2.2 x 2.4 m Accessories / Special Features • AGIEVISION 5 CNC Path Control for 5 Axis with OS 2 Machining Version and With various subprogrammes for a easier and faster designing of machining programmes, Technology devices, PP 123 Agie Geometric helps, DNC-Connection,Graficheck in 2 D a. 3 D, Rethreading of wire when wire is cutted-off, Optimizing the programmed pathes, PURECUT for reduction of Oxidation on workpiece surface,10 various program-languages, and many more features. • Mobile electronic hand held control unit for manual adjustments and set-ups for new workpieces, and separate standing control panel with CD-recorder and large monitor. • “DA” PROGRESS integrated Dieelectricum Aggregate with chiller and Filtering System, large tank incorporated in machine’s basement, Koax flushing, Podot Hxbkspfx Ag Djrd • AGIE Generator with 65 A Capacity and cutting performance up to 300/450 mm² • AGIE Automatic Wire Threading System with wire shredder and container mounted in backside of machine. Condition : Very good. The machine comes from a first class tool and die shop. It has been kept in very good order and was regularly maintained. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: ready for operation (used), Year of construction: 1992, Compressive force: 1000kN/100t, ram stroke: 200mm, max. operating pressure: 290bar, control: DNC70, safety distance: 166mm, overtravel time: 104ms, overtravel distance: 7mm. Predpfxjwcz Axo Ag Ded

Condition: new, ELMAG HGS-A 3100x6mm Hydraulic sheet metal shears Universal use The hydraulically driven HGS-A swing-cut shears cut powerfully through all sheet thicknesses up to 6.0 or 8.0 mm. Their super-hard, precision-ground special steel blades always leave a clean, straight cut. Important advantages of the swing cut technology: - High cutting quality - High long-term accuracy of the machine - Long blade service life - Long resharpening intervals Standard equipment - Upper and lower knives also for stainless steel processing - Hydraulic cutting gap adjustment - Upper blade with two cutting edges, special beam hardened - Bottom blade with four cutting edges, special hardened steel - Cutting gap adjustment device - NC-controlled backgauge with recirculating ball screw - Cutting line lighting - Automatic hold-down system - CE safety devices - Support arm with ruler and side stops - Support table with ball rollers - HGS-A control console - CybTouch 6 control unit with color touchscreen - Mobile control column with foot release and emergency stop button - Operating instructions / CE Special accessories - Angle stop with scale - Sheet metal holding device type I or type II - Support arm length up to three meters, with ruler - Laser cutting line indicator - Finger protection light curtain - CNC HGS-A with CYBELEC DNC 61 G control unit ADVANTAGES High quality standards Robust industrial models from state-of-the-art production High cutting accuracy Welded, very stable and stress-free monoblock steel construction steel construction with excellent vibration damping S275 material with very high tensile strength High-quality BOSCH-REXROTH or HOERBIGER hydraulic system Low-noise ATOS hydraulic pumps with high pressure capacity Powerful hydraulic cylinders honed and chrome-plated Upper blade with two cutting edges, special hardened steel Psdpfst Egb Nox Ag Djrd Lower blade with four cutting edges, special hardened steel Central cutting gap adjustment for quality cuts of different material thicknesses and types NC-controlled, motorized, precisely adjustable back gauge with recirculating ball screw High adjustment speed 110 mm/s, adjustment range 1,000 mm Back gauge with automatic reset Cutting line lighting Automatic hold-down system with high holding force for support and tilt safety during the cutting phase CE safety devices Installed safety through cutting gap cover Light barrier on the rear of the machine Emergency stop button on the machine and on the control column TECHNICAL DATA Cutting length 3100 mm Cutting capacity 42 kg/mm² 6 mm Cutting capacity 70 kg/mm² 4 mm Cutting gap min. / max. 0.05 - 0.8 mm Number of strokes 20 1/min Hold-down device 14 No. Hold-down pressure 12 t Main drive Motor power 11 kW Backgauge Motor power 0.75 kW Backgauge adjustment range 1000 mm Adjustment speed 110 mm/s Cutting angle 1.2 ° Table length 3400 mm Support arms 2 No. Width without support arms 2410 mm Transport width 2100 mm Table height 800 mm Oil tank volume 150 l Length 4000 mm Width 3010 mm Height 1640 mm Weight 5500 kg

Condition: good (used), Year of construction: 1999, cutting length (max.): 4,200 mm, cutting height (max.): 115 mm, Panel saw with lifting table loading Manufacturer Scheer Type PA 7004 horizontal panel dividing saw with automatic lifting table loading with cutting optimization software in 11.2020 new PC with DNC-AT control, operating system Linux with PA software S5 Prsdpfx Ajvyyn Neg Dsd Cutting length 4200 mm Travel path of the material pusher 4250 mm Cutting height 115 mm Maximum saw blade projection 135 mm Panel saw size FM22 Main saw blade maximum diameter 450 mm Scoring saw blade maximum diameter 200 mm Saw blade bore 30 mm Feed speed of the saw 0-100 m/min. Return speed of the saw 100 m/min. Number of collets 7 pieces Feed speed of the material pusher in the forward direction 30 m/min, in the return direction 70 m/min. Remaining section device SP5004 Saw motor 11 kW, scoring unit 2.2 kW Saw feed motor 1.1 kW, table feed motor 1.63 kW Lifting table motor 4 kW, drive motor for roller conveyor 0.37 kW Total power 20.4 kW Front air cushion support tables 3 pieces Width of the tables 800 mm, length 2000 mm Compressed air maximum 6 bar, limit pressure 7 bar Compressed air hose diameter 10 mm Air consumption approx. 15 liters per cycle Angle pressing device WP 5033 Lifting table device with driven roller conveyor Dimensions 1700 mm x 4700 mm 3 x suction connection diameter 120 mm Documentation available Declaration of conformity available

Condition: like new (used), functionality: fully functional, Panel Dividing System SCHEER FM 16 – DNC 3100 x 3100 As New – Machine No. 33542 The SCHEER FM 16 is a high-performance, electronically controlled panel dividing saw featuring advanced drive technology and an intuitive control interface. The machine has been fully overhauled and newly painted – its condition is virtually as new. Ideal for precise, automated cutting of wood-based panels in continuous industrial operation. Main Technical Data: • Cutting length: 3100 mm • Cutting depth / Blade projection: 80 mm • Saw motor: 7.0 kW • Scoring motor: 1.1 kW (can be switched off) • Feed speed: 2 – 40 m/min (steplessly adjustable) • Return: Rapid traverse, automatic lowering • Operator interface: SCHEERWIN, graphical, document-oriented (64-bit) on Windows 10 • Drive system: Küenle frequency inverter with Stöber synchronous servo drives incl. absolute encoder – for highest positioning accuracy and dynamic control Features & Highlights: • FM 16-3100 longitudinal cutting saw with hardened guides and automatic forward/reverse travel Psdounwk Tjpfx Ag Dord • HP 5021 material feed table with 6 clamping carriages, servo drive & measuring resolution of 0.05 mm • WP angular pressure system, 2400 mm adjustment range, fully automatic • SP 5000 remnant cutting device for offcuts down to min. 5 mm • HP 5024 miter fence table (1800 x 800 mm), steel angle with Pertinax overlay • HP 5025 workpiece support table (1800 x 800 mm), also with Pertinax overlay • Air cushion system in the front tables, including radial fan Saw blades included: • KSB 4005 for main saw (ø 305 mm, Z = 60) • KSB 4006 for scorer (ø 200 mm) Condition & Service: • Condition: Overhauled & as new • Functionality: Fully operational • Warranty: 12 months Reliability in Continuous Operation: This machine is in use worldwide – even under extreme conditions. Whether in the dry climates of Africa or the humid environments of Southeast Asia (e.g., Thailand), the SCHEER FM 16 operates reliably in 3-shift systems – 365 days a year – and stands out for its superior precision, stability, and durability. Warranty: We are so confident in the quality and robustness of our machines that we offer a 7-year warranty on the machine frame and guideways. (Excludes electrical supplier components and wear parts.) Flexibility & Customization: We offer various models and equipment options – to fit every budget. We also realize custom tailored solutions based on your individual requirements. 📞 Contact us for an individual offer or to arrange a viewing appointment. Machine available from stock. Delivery, commissioning and training optionally available.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1998, controller model: CYBELEC DNC 70, bending force (max.): 130 t, working width: 3,550 mm, stroke length: 250 mm, distance between stands: 3,050 mm, TECHNICAL DETAILS Press force: 130 t Bending length: 3,550 mm Frame gap: 3,050 mm Pedpfx Asww E Tweg Dsrd Stroke: 250 mm Control: CYBELEC DNC 70 Controlled axes: y1, y2, x, R MACHINE DETAILS Machine weight: approx. 11,600 kg Space requirement: approx. 4,000x2,000x3,000 mm EQUIPMENT - 2 support arms - Two-hand foot control - Wila tool clamping top and bottom - Crowning system - Side safety guards - 4 manually adjustable backgauge fingers

Year of construction: 1995, condition: ready for operation (used), Pressing force: 200t/2000kN, bending length: 3550mm, upright distance: 3050mm, upright projection: 350mm, max. ram stroke: 200mm, max. ram-to-table distance: 540mm. Dimensions X/Y/Z: approx. 4400mm/2100mm/3200mm, weight: approx. 16000kg, control: Cybelec DNC 800. Including a matrix, 2x upper tool (30°/60°) and a new light barrier. Documentation available. On-site inspection is possible. Podpfxstva Dno Ag Djrd