Used Dna Sequencer for sale (486)

Condition: used, Year of construction: 2022, PANEL SAW WITH TILTING SAW BLADE Linvincibile SI 5 KEY FEATURES SLIDING TABLE: GUARANTEED SUPERIOR CUTTING QUALITY OVER THE LONG TERM TELESCOPIC ARM: AN “UNBEATABLE” SMOOTH MOVEMENT SAW UNIT: FOR A PERFECT CUT Technical Data SI 5 Main saw blade diameter (mm): 550 Cutting capacity with extendable fence - with table 3200 mm - with table 3800 mm 3200x3200 3800x3200 Saw blade tilt (degrees): 46 Max. cutting height at 90° (mm): 200 Max. cutting height at 45° (mm): 130 Saw blade speed (rpm): 2500-3500-5000 Scoring blade speed (rpm): 8500 - Extractor port diameter: - on frame - on blade guard 120 100 Main motor power [S6 -40%] Hz50 kW: 7 Scoring motor power [S6 -40%] Hz50 kW: 0.9 Cutting width at rip fence (mm): 1600 Standard equipment and accessories - Optimizer/Process control app for tablets: SCM Thundercut. The app can be downloaded from the App Store or Play Store for tablets compatible with iPadOS or Android. It can be activated via the QR code supplied with the machine. The app enables: * Management of machine fleet and material/panel storage * Creation and editing of projects, importing projects from main furniture design software (file format "cpout"), importing cutting lists * Optimization of cutting lists by selecting one or more proposals from the optimization software integrated into the app * Correct machine settings for each cut, thanks to the simple and intuitive graphics of the 3D sequencer, guiding the operator step by step * Printing barcode labels to identify the various parts, via Bluetooth connection with compatible label printers. - 10-year warranty on the sliding table guide system - Sliding carriage entirely made of aluminum structure with guidance on crimped, hardened and arc-ground steel rails with large contact area - Max. saw blade diameter* up to 450mm with scoring blade mounted* up to 550mm without scoring blade - eye-S 15" electronic control including: * 15" touchscreen monitor * Direct control of the following working axes with manual, semi-automatic, automatic, and incremental modes: - Height adjustment of the main saw blade - Tilt adjustment of the saw unit - Rip fence adjustment - Height and lateral adjustment of the scorer (the scorer is automatically raised to the set position on activation and lowered on deactivation) * Operator assistance functions for complex cuts * Ability to store up to 1000 programs with associated image * Ability to store up to 1000 different tools with associated image * Cutting process management of preloaded parametric machining programs * Environment for creating and storing new sequenced working programs * Automatic import of working dimensions from Thundercut app * USB port * Ready for network connection - Auxiliary function of the electronic control, including: * Determination of correct fence position on rip fence for format processing with tilted saw blade * Determination of correct fence position on rip fence for angle cuts with mitre fence on the work table with or without tilted saw blade - Pivoting control panel above the table - Scoring unit with independent Bcsdpfx Aaexqtvqo Ujw

Condition: good (used), Code: 0271 Brand: STROMAB Model: TR 600 MATRIX 2 PLUS - CE Standard Automatic cut-off saw with electronic pusher MATRIX 2 PLUS ( mm 8000) for the production of pallets, packaging, door and window frames, furniture and garden furniture, carpentry and various - CE Standard Technical data: Blade diameter mm 600 Motor Hp 12,5 Blade speed min 3000 Working table height mm 850 Hydraulic blade unit drive Blade lifting speed regulator Cutting area protection cover Bimanual hand guard control Bcjdpfxsyn Rhaj Aa Ujw Cutting capacity Width 610 mm - Height 30 mm Width 580 mm - Height 60 mm Width 530 mm - Height 100 mm Width 490 mm - Height 120 mm Width 450 mm - Height 140 mm Width 380 mm - Height 160 mm Outfeed flat table Suction ports n° 3 diameter mm 100 Numerically controlled pusher MATRIX 2 PLUS Technical data: Maximum working length mm 8000 Feeding system featuring precision rack and brushless motor Positioning reading on magnetic stripe Positioning precision +/-0,4 mm Pneumatic rising of the pusher with workpiece measurement sensor Main system: Cutting cycle (pattern) editing by keypad, by remote PC via serial port (RS232) or by Ethernet Working software: A) N° 99 programmable cutting cycles with 15 sizes (lines) per cycle - Example of cutting cycle: Board length, trim cut , 1 size (line).....15° size B) N° 1 cutting cycle with 100 programmable sizes to be cutted in sequence Exit surface 4000 x 600 mm Compressed air 7 bar Overall dimensions of assembled machine: mm 13000 x 2000 x 1600 h Overall dimensions for transport : Machine mm 1200 x 1700 x 1600 h - Matrix pusher mm 8800 x 1500 x 1500 h Weight kg 1600

Year of construction: 1988, condition: excellent (used), machine/vehicle number: 3284, (min.) material thickness: 0.65 mm (max.) material thickness: 2 mm Technical Data: Width of film, max./min. 450/350 mm Forming area max. 430 x 160 mm Drawing depth max. negative/positive 6/20 mm (on request 22 mm negative) Top heater max. 10,15 kW Driving motors 3,0 kW Total connected load at 100 % duty cycle 12,7 kW Working air pressure 6 bar Air consumption (dependent on product) max. 1250 I/min Rate of water flow max. 1,0 m3/h COMPACT AND ROBUST - giving continuous high output. Easy and ergonomical operation (e.g. take- off height 1300 mm). QUICKLY CHANGEOVER - from 30° to 90° foil feed giving maximum material utilisation for both square and round lids. Heater changeover problem-free. PRECISION - The accuracy of the form table movement is guaranteed by linear guide bearings and hardened rods. The safe reliable guarantee for precision. OPTIMUM PUNCHING ACCURACY EVEN DURING MAXIMUM OUTPUT Bsdohbu E Hepfx Aa Uecw Cam controlled function sequence guarantees absolute precision with every cycle.

Condition: new, mileage: 100 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, loading space length: 8,700 mm, loading space width: 2,480 mm, loading space height: 2,900 mm, Year of construction: 2026, Equipment: air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, tail-lift, MACHINE TRANSPORTER / FORKLIFT TRANSPORTER / WORK PLATFORM TRANSPORTER VOLVO FH 500 8x2 Chassis CHH-MED, new model - Electrohydraulically steered trailing axle, single wheels - Globetrotter safety cab FH - Wheelbase 6,000 mm - Emissions according to Euro 6, with SCR, particulate filter, and exhaust gas recirculation - Volvo Engine Brake+ (VEB+) Bcsdeync E Repfx Aa Ujw - Driver Comfort Package Plus - Electric roof window and emergency exit (tinted glass) - Interior sun visor, electric roller blind - Air conditioning with automatic temperature control, sun sensor, fog sensor - Auxiliary heater - Refrigerator with 33 L freezer compartment under bunk - Information and media package with navigation - Second driver information display, 9" color touchscreen - 8 speakers: 4 in dashboard, 1 in each door, and 2 in the sleeper area - Light and visibility package Plus - Close-range camera on passenger side for blind spot monitoring - Rain sensor (sensor-controlled wipers) - Static LED cornering lights - LED main headlights - Automatic headlight leveling - Headlamp cleaning system - 275 L fuel tank, left between dual front axles, plastic - Air suspension on front axle(s) - First trailing axle 7.5 t - Volvo Dynamic Steering (VDS) - 350 L aluminum tank left, D-shape, 560 mm high - LED rear lights - Emergency brake lights with flashing sequence - Rear chassis cover (sharp edges protected) - Wheels and tires - Dura-Bright EVO polished aluminum rims, standard bolt pattern, front axle tires 385/55R22.5 - Radio reception: AM/FM and DAB/DAB+ (analog & digital) - Leather steering wheel - Adaptive cruise control (ACC) with collision warning and emergency braking function - Lane departure warning with steering assistance - Dynamic trim: Seats in blue/dark blue fabric, interior trim in grey fabric - Comfort driver's seat, air-sprung, heated, integrated seat belt - Armrests covered in leather - Leather entry handles - 4 rectangular high beams with parking lights on VOLVO roof bar - etc. - Body in curtainsider configuration with heavy-duty tail lift - Use as tail lift (9 t) or as drive-on ramp (14 t) - Lifting roof - Rear portal can be widened - Reversing camera The truck is inbound and the body is currently being manufactured. The current delivery time is approx. 5 months. Further information available upon request.

Year of construction: 1998, operating hours: 5,400 h, condition: good (used), functionality: fully functional, Sawblade –Ø: 500 - 1000 mm Cutting lenghts for saw blade – Ø 500 mm = 3400 mm Saw motor output: 18,5 KW 400 Volt, 50 Hz. Standard rot. speed: 1.000 / 1.450 U/min. Support: electrical vertical adjustment of saw blade; stroke ca. 550 mm Bcjdpfx Aasym Nzpj Usw Support: electrically swivelling from 0°- 48°. Control: Electronic sequence - cutting control Automatic program: for soft and hard stones Operator panel : swiveling Folding bellows cover Bridge and cross guides Machine rotary table Size: 3400 x 1500 x 800 mm Table can be rotated manually through 360°, with fixed locking at 90° intervals, or individually in any position. Side stops can be folded down manually

Condition: used, This listing is for the Bio-Rad PowerPac 200 DC power supply Bcedpfx Aaoyfh Apo Ujw The unit is in full working condition and is ready for immediate use The Bio-Rad PowerPac 200 is a DC power supply designed primarily for gel electrophoresis and blotting applications in molecular biology and biochemistry labs. It provides stable, controllable electrical power to electrophoresis tanks used for separating DNA, RNA, or proteins

Year of construction: 1993, condition: good (used), functionality: fully functional, Sawblade –Ø: 500 - 900 mm Cutting lenghts for saw blade – Ø 500 mm = 3400 mm Saw motor output: 18,5 KW 400 Volt, 50 Hz. Standard rot. speed: 1400 U/min. Support: electrical vertical adjustment of saw blade; stroke ca. 550 mm Support: electrically swivelling from 0°- 48°. Control: Electronic sequence - cutting control Automatic program: for soft and hard stones Operator panel : swiveling Electrically height-adjustable protective cover Machine-turntable-sizes: 3400 x 1500 (1800) x 800 mm Machine turntable: electrically rotatable by 360° Side stops can be folded manually Bcodeym Nv Hepfx Aa Ujw Table equipped with pneumatic UP and DOWN movable rollers on all sides

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Bsdpfx Aevvkfdoa Uscw

Condition: excellent (used), Hamilton FLOW PCR Setup Instrument The Hamilton FLOW PCR Setup Instrument is a benchtop robotic workstation for the fully automated preparation of PCR and qPCR reaction solutions. It is designed to minimize manual pipetting errors and increase sample throughput. It is typically used in conjunction with Roche Life Science products (such as the MagNA Pure 96 System and LightCycler® 480 Instrument) as part of the FLOW solution. Features and Specifications The Hamilton FLOW PCR Setup Instrument (PSU) is characterized by its precision and ability to be integrated into automated workflows. Automation: It automates the pipetting and dispensing of PCR components (samples, master mixes, primers) into 96- or 384-well PCR plates. Volume Range: The hardware is designed for aspiration and dispensing volumes up to 1 ml. Traceability: It features automatic barcode tracking on accessories and consumables to ensure complete sample traceability. Software Integration: The instrument uses FLOW software, which imports test requests from laboratory information management systems (LIMS) and reports results. The software also allows for user-friendly configuration of PCR setups. Bjdpfx Aoyk Uxnoa Uscw Flexibility: It can be used either as a standalone instrument for PCR setup or in a "FLOW Flex" configuration for combined primary sample handling and PCR preparation. Accessories: Optional accessories, such as cooling blocks for PCR plates, are available to maintain the integrity of temperature-sensitive reagents. Applications Experts from Hamilton and Roche point out that the instrument is suitable for a wide range of genomic applications: Gene expression analysis Genotyping Sequencing Detection of pathogens (e.g., SARS-CoV-2 tests) Clinical diagnostics Power supply: 115 V AC to 230 V AC (+/- 10%) Frequency: 50/60 Hz +/- 5% Power consumption: 600 VA Dimensions: 112.4 × 90.3 × 100.6 cm (W × H × D) Depth without automatic loading: 79.5 cm Weight: 180 kg Financing through our bank is also available. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Year of construction: 2007, condition: good (used), Chemagen chemagic Magnetic Separation Module I The chemagic Magnetic Separation Module I (chemagic MSM I) automatically isolates nucleic acids within one hour. Viral RNA from 96 nasal swabs can be isolated simultaneously. The Chemagen MSM-1 is an automated system for high-throughput nucleic acid (DNA/RNA) isolation. It utilizes patented Magnetic Bead Technology, in which magnetizable metal rods are immersed in the process solutions to efficiently collect and resuspend the bound particles. Technical Features & Capacity Throughput: The system has a modular design and can process 12, 24, or 96 samples simultaneously, depending on the rod head used. Sample Volume: It offers high flexibility for volumes from 10 µl to 10 ml. Processing Time: 96 samples (small volumes): approx. 15–60 min. 24 samples (medium volumes): approx. 35–60 min. 12 samples (large volumes): approx. 45–60 min. Technology: Particle resuspension is achieved by rotating the metal rods at up to 2,000 rpm, enabling high yield and purity without cross-contamination. System Components & Extensions Automation: The MSM-1 can be integrated into standard liquid handling units and often features a 6-axis industrial robot for fully automated sample tracking. Software: The system is controlled by chemagic QA software, which is LIMS-compatible. Applications The device is primarily used in research and diagnostics, including: Biobanking and human genetics HLA typing Detection of viruses and bacteria Extraction from various materials such as whole blood, saliva, serum, or plasma System Components Actuators: High-precision linear axes for vertical movement and a rotary axis for mixing Electromagnet: Central unit for controlling the magnetic attraction to the metal rods Interfaces: Integrated PC with screen, keyboard, and barcode scanner for sample tracking Software: chemagic QA software (LIMS-compatible, logging, user management) Special Features Bodpfx Aasyk Uu Ne Uocw Cross-contamination protection: The use of disposable protective sleeves (tip combs) for the metal rods prevents contact between samples. Automation: Can be combined with the chemagic dispenser for automated buffer filling or integrated into liquid handling robots (e.g., Hamilton, Tecan). Probe heads: 96 Sample volume: 10 - 400 μL Number of samples: 1 to 96 samples TFT monitor, keyboard, and mouse Year of manufacture: 2007 Dimensions & Setup Basic machine (W/D/H): approx. 600 x 640 x 950 mm. Carrier axis (W/D/H): 1940 x 170 x 200 mm (with full expansion and rail system). Total space requirement: A fully configured system can require up to 2000 x 740 x 800 mm (L/W/H). Financing through our bank is also available. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2019, number of axes: 3, This 3-axis SAFAN Darley E-Brake Premium press brake was manufactured in 2019. It features a CNC-controlled servo-electronic system with Y1/Y2, X, and R axes, and a stroke of 300 mm. The EC10 control system supports multiple file formats and includes safety equipment compliant with European directives. Ideal for precise bending operations, consider the opportunity to buy this SAFAN Darley E-Brake Premium press brake. Contact us for more information about this machine. Bcodpfxjx Np Ehs Aa Uow • Control and software: • EC10 control with split-screen on a height-adjustable swivel arm • SafanDarley EC Control with center-mounted swivel arm (operation from either side) • Displays DWG, DXF, PDF, JPG, PNG, BMP, WMV • German language instructions and HMI • EC20 software package for EC10 split-screen incl. EC Profiler with 2D bending simulation • Automatic bend sequence calculation and graphical representation for AutoPol and Radan files • Axes and travels: • CNC-controlled Y1/Y2 (stroke 300 mm) • CNC-controlled X-axis • CNC-controlled R-axis • CNC-controlled Z1+Z2 (Type G) with programmable independent lateral adjustment of backgauge fingers • CNC-controlled dX-axis on Z2 finger, 100 mm stroke (+/- 50 mm), with hardened 3D backgauge cams • Enlarged installation dimension Q = 650 mm, stroke 300 mm • Tooling and clamping: • NSCL-II HC Premium upper tool adapter with hydraulic clamping, hardened surface, incl. hydraulic unit • Upper tool working height 80 mm; clamping length 1275 mm • OB II HC Premium mounting table with adjustment wedge, hydraulic clamping, hardened surface • Mounting table size 110 x 87 x 1275 mm, incl. hydraulic unit • Measurement: • E-Bend S sheet thickness measurement at the Z1 backgauge finger • Safety and lighting: • CNC-programmable safety light curtain • Safety equipment compliant with EU Machine Directive MRL/2006/42/EG • Front-side work area lighting and rear-side tool lighting • Ergonomics (machine-integrated): • Ergonomic package: lower beam with legroom recess and tilted footrest • Foot pedal usable on the footrest or on the floor • Identification and logistics: • Customs tariff number: 8462 2110 • Main machine weight: 3250 kg; dimensions: 2330 x 1809 x 2649 mm • Secondary pallet: 90 kg; 1300 x 800 x 900 mm Additional equipment • Ergonomic table system: central segment (height and tilt adjustable) and left/right segments (height adjustable) • Adjustable chair with seat, footrest, and backrest adjustment on swivel casters • Left-side material cabinet with five height-adjustable shelves

Condition: used, Hydraulic Profile Bending Machine, Pipe Bending Machine LANG Type Ondomat 60 Serial No. 2589 Year of manufacture: 1970 Bending capacity max.: Ø 60 x 2 mm Pressing force: 20 tons Counterforce: 7.5 tons Maximum bending angle: 135° Tool stroke: 250 mm Maximum tool width: 125 mm External width of tool rocker: 90 mm Motor power: 18 kW Power supply: 380 Volt, 50 Hz - Hydraulic bending process with counterpressure cylinder for wrinkle-free bending - Up to 10 different bending angles in sequence via automatic indexing turret - Two-hand control panel Bcsdpfx Ajyi Hrwsa Uow - 1 set of bending dies Ø 30 mm, die width rocker = 78 mm, die width counterholder = 50 mm Required space (L x W x H): 2000 x 750 x 1500 mm Weight: approx. 2 tons Good condition

Condition: excellent (used), Desoutter CVI II Controller with Angle Screwdriver Manufacturer: Georges Renault (Desoutter) Controller: CVI II Angle Screwdriver: 01C11200 CVI II Controller From simple start-up operations to complex sequence applications—with up to 20 phases and 250 cycles—for optimal speed, accuracy, and ease of use with every connection. The controller features various interfaces, including an Ethernet port, an RS232 port, 7 logic inputs, and 8 logic outputs (24 volts). The CVI II controller can operate an ER series handheld power tool or an EM series stationary screwdrive. It is important to note that the CVI II can also be used in combination with a sensor-controlled angle screwdriver such as the Desoutter ERA40J, which has a torque range of 8 to 40 Nm and a 3/8" drive. Storage Capacity Between 2,500 and 8,500 tightening results per station, depending on the number of cycles and operating mode (asynchronous or synchronous). Tightening Strategies Bcedewxv Hkjpfx Aa Ujw – Torque and Angle Monitoring – Angle and Torque Monitoring – Torque and Angle Monitoring – Torque and Angle Rate – Prevailing Torque – Yield Strength – Stall Torque – Torque and Angle – Plastic Zone Detection – Additional Torque and Angle Sensors – Self-Tapping – Current Monitoring Connectable Tools: Angle Screwdrivers / Stick Screwdrivers / Pistol Screwdrivers / Stationary Screw Spindles Dimensions (L x W x H): 400 x 400 × 330 mm Weight: 30 kg Financing through our bank is also available. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), WSM Stationary Screwing Unit Assembly and testing of components for car radios and navigation systems. The assembly station is enclosed in a protective housing. The service doors are equipped with monitoring switches with interlocks. The doors are locked during automatic operation and can only be opened during automatic stop or manually after pressing the "Doors" button on the control panel. Automatic operation cannot be started with a door open. Bcodpeibichefx Aa Ujw Operational Sequence The station is loaded with the pre-assembled component via the transfer belt. The following describes the operation steps of the automatic station with a transfer belt. In normal operation, all three stations operate in parallel. - Positioning the test unit (WT) with the pre-assembled module in station 2.1 - Lowering the carrier with the scanner and vision sensor - Scanning the 3 codes (front panel, front PCB, SD PCB), comparison with the database - Checking the correct locking of the FFC in the connector - Raising the carrier and lowering the test unit onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.2 - Positioning the screwdriver and screwing the front PCB in place - Lowering the test unit (WT) onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.3 - Lowering the light shield and making contacts, adjusting the carrier with the test sensors from below - Type-dependent testing of the SD + CD slot lighting and buttons - Functional test of the CD eject button - Lowering the test unit (WT) onto the conveyor belt > continue If errors occur during testing, they are displayed on the screen. and can be repaired if possible. For this, the system is switched to manual operation and the doors are opened. After the repair and restarting the automatic system, the workpiece carrier is tested again in the station. If a repair is not possible (e.g., due to a screw error), the workpiece carrier is marked as NIO (Not Okay) in the control system and is not processed further. Manual NIO marking and rejection is also possible. Financing through our bank is also available. komplett-konzept.leasingo.de More assembly stations, new and used, can be found in our shop! International shipping costs on request!

Condition: good (used), Bluhm Weber Legi-Air-4050S Labeling Machine 4.14.1 Basic Structure Bcedpfx Aoibh Tkea Usw The system is designed as a closed aluminum profile frame and has a very compact design. The control cabinets are integrated into the lower part of the frame. The main valve manifold is located behind a service door below the control panel. The system includes four workstation stops. Operation is via a touchscreen. The control panel is mounted on the right side of the frame. A Bluhm Weber labeling system is used in the station; the Bluhm Weber documentation applies accordingly. 4.14.2 Operational Sequence - The incoming workpiece carriers with I/O modules are stopped, lifted (positioned), and contacted in substations 10.1 and 10.2. In these two stations, the I/O modules are automatically labeled. In substation 10.3, the I/O modules are automatically labeled. Label generation and content creation are automated, as is application to the devices. - After labeling is complete, the module is finalized in station 10.4. For this, it is stopped, lifted, and contacted. Following finalization, the workpiece carrier is automatically ejected from the station. Legi-Air 4050 RH Label Print and Apply System with Zebra ZE500-4 Print Module Motor-driven large roll unwinder Label rolls with a diameter of up to 430 mm and 900 linear meters of label web ensure long continuous production runs. Tandem operation ensures uninterrupted production. Applicator dies Quickly interchangeable applicator dies allow for the processing of label sizes ranging from small nameplates to DIN A5 EAN128 shipping labels. The Quick-Change option allows for format changes in seconds. Spring-loaded applicator dies compensate for uneven product surfaces, ensuring clean label application. Controller Bluhm Weber Standard Controller Zebra ZE500-4 Print Module Label Printer Standard Features • Print Methods: Thermal Transfer or Direct Thermal • Orientation: Right or Left • All-Metal Industrial Construction • 16 MB SDRAM, 64 MB Flash Memory • Applicator Interface • Transmissive and Reflective Media Sensors • Multi-Level Element Energy Equalizer™ (E3™) for High Print Quality • Real-Time Clock • Rotating Display • ZPL II™ – Universal Language for Zebra Printers Technical Specifications Maximum Print Width • 104 mm Media Specifications • Label and Carrier Width: 16 mm to 114 mm • Minimum Retraction Length: 13 mm • Minimum Non-Retraction Length: 6.5 mm • Minimum Stream Mode Length: 6.5 mm • Maximum Length: 990 mm • Maximum Continuous Media Length: 3810 mm mm • Ribbon width: 25.4 mm to 107 mm Resolution • 8 dots/mm (203 dpi) or 12 dots/mm (300 dpi) Maximum print speed • 305 mm per second (203 and 300 dpi) Technical specifications • Width: 245 mm • Depth: 379 mm • Height: 300 mm • Weight: 15.4 kg Financing through our bank is also available. komplett-konzept.leasingo.de Further assembly modules in other sizes – new and used – can be found in our shop! International shipping costs on request!

Condition: new, power: 375 kW (509.86 HP), first registration: 11/2025, fuel type: diesel, tire size: 385/55-22,5, axle configuration: 6x2, wheelbase: 5,600 mm, fuel: diesel, fuel tank capacity: 610 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 65,000 mm, loading space width: 24,800 mm, Year of construction: 2025, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power mirror, retarder, seat heater, soot filter, trailer coupling, - Aluminum fuel tank - Rear work lights - Heated exterior mirrors - Heated mirrors - Passenger seat - Bluetooth - High beam - Low noise - Speed limiter - Cabin - Catalytic converter - Automatic climate control - Refrigerator - LED lighting - Air suspension - Air-suspended seats - Particulate filter - PTO (Power Take-Off) - Radio / multimedia system - Disc brakes - Sliding roof - Sleeper cab - Seat heating - Sun visor - Lane departure warning system - Stability control - Auxiliary heating (parking heater) - Warming automatic function - Toolbox - Windscreen - Additional steering axle Internal reference for customer inquiries: 3-383 Vehicle with day registration to PAVIC VOLVO FH 500 LL 6x2 CONTAINER FLATBED WITH FASSI 545RA.2.28 XE-DYNAMIC CRANE Crane: FASSI F545RA.2.28 xe-dynamic At 20.8 m, this crane can still lift 1,650 kg (optionally extendable with 2 manual extensions to 24.9 m and 700 kg) Continuous slewing range Double knuckle joint system with PROLINK (overbending knuckle arm up to 15 degrees) FASSI stability control Radio remote control with linear levers and reach display XF-System (Extra Quick) XP-System (Extra Power) FL-System (Full Lift) Outriggers operable via radio control LED work lights Winch pre-installation (winch model Fassi V30 can be retrofitted at any time) and much more Vehicle Description: Volvo FH 500 New Model Low-profile container flatbed body 2 pairs of sliding container locks extendable to 3 m for 20-foot containers 4 extendable warning boards with lighting, length up to 3 m Platform dimensions: 6,500 mm x 2,480 mm Side and rear walls 600 mm high Front wall 1,900 mm high Lashing rings at approx. 250 mm intervals Forklift approach protection Globetrotter safety cab, FH 13-liter diesel engine, 510 hp / 375 kW, 2,550 Nm Emissions according to Euro 6E, with SCR, particulate filter, and exhaust gas recirculation I-Shift, automated 12-speed gearbox I-Shift drive modes: Standard, Performance, and Economy Volvo Engine Brake (VEB+) Wheelbase 5,600 mm Drive 6x2 Differential lock Air/air suspension Front axle tires 385/55R22.5, drive axle tires 315/70R22.5, tag axle tires 385/55R22.5 Trailer coupling Rockinger 400 G 150 LED main headlights Rain sensor (sensor-controlled wipers) LED daytime running lights, "V-light" Bjdpfxsylxwqj Aa Ujcw LED rear lights, brake lights with emergency brake flashing sequence Stationary air conditioning Auxiliary heating (parking heater) Comfort driver's seat, air-suspended, heated, integrated seat belt Leather steering wheel Media / infotainment system with navigation Cool box with freezer compartment 33 L under bunk Electric roof hatch, tinted glass Near-side camera on passenger side for blind spot monitoring Adaptive cruise control (ACC) with collision warning and emergency braking function Lane departure warning system and much more. Financing / hire purchase, as well as leasing / partial amortization leasing, is possible with our leasing partner. For further questions, our sales team will be happy to assist you.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Safety Tester for High Voltage Test Station - EATON Sefelec 506-S The device was purchased in 2023 and is in excellent condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is DSP-controlled. This technology offers the operator optimal stability and repeatability of measurements. The high precision and measurement speed are tailored to meet the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The new SEFELEC model series features a 7" touchscreen that impresses with its simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface Bedpfx Aexqxt Isa Ujcw - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Withstand voltage at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC up to 1000 VDC Optional: 2TΩ range PE testing at 32A - 8VAC, measurement 0 ... 1Ω Optional: testing current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7", 16 million colors, for programming and display of current tests and results Integrated ARM Dual Core Control & 3D NAND technology for optimal precision, stability, and repeatability Integrated DSP for higher test speeds Large internal memory for storing configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2: Particular requirements for testing and measuring circuits for insulation resistance and dielectric strength) Shipping is possible upon arrangement. #8312-1

Condition: good (used), Year of construction: 2018, power: 0.55 kW (0.75 HP), AR Filtrazioni ARF 700 YB air purifier, built in 2018. The ARF series is designed for the extraction and purification of micro-dust and fumes generated during dry/wet processing. Bcodpfx Asv T Db Tja Usw The incoming air first passes through a metal filter sequence and a synthetic filter, which traps larger particles. In the next phase, the air is passed through a very high-performance HEPA filter (H13) in accordance with the European standard EN 1822, before being released back into the environment completely clean. Dimensions: 460 x 500 mm, H 1,050 mm Weight: 80 kg Flow rate: 700 m³/h Connection: 100 mm #8347

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Safety tester with scanner for high-voltage test station - EATON Sefelec 506-S - EATON Sefelec 64-SC The devices were purchased in 2023/2024 and are in top condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is controlled via DSP. This technology offers the operator optimal stability and repeatability of measurements. The high accuracy and measurement speed are tailored to the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The 7” touchscreen of the new SEFELEC model series impresses with simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Voltage withstand at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC to 1000 VDC Optional: 2TΩ range Bcedjxqxw Tspfx Aa Ujw PE measurement at 32A - 8VAC, measurement 0 ... 1Ω Optional: test current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7”, 16 million colors, for programming, as well as for displaying ongoing tests and results Integrated ARM dual core control & Nand 3D technology for optimal accuracy, stability and repeatability Integrated DSP enables higher test speeds Large internal memory for storing configurations and test results Completely compliant with IEC 61010-2-034 (safety requirements for test and measurement equipment for insulation resistance measurement and equipment for voltage withstand testing) Shipping is possible subject to prior agreement. #8312-2

Condition: like new (used), functionality: fully functional, Year of construction: 1997, Hydraulic press brake LVD PPEB-EQ 80/25 S630 with retrofit 2023 Year of construction 1997 Serial number 24589 Technical specifications Force 800kN Working length 2500mm Distance between uprights 2050mm Stroke 200mm Distance table – ram 400mm Gap 400mm Width table 150mm Approach speed 130mm/s Working speed 11mm/s Return speed 115mm/s weight 6200 kg motor 7,5 kW NEW 2023 CNC COMMAND CONTROL S-630 4 axes Y1 - Y2 X - R Touch screen 10” 2D-Graphic simulation of bending Bsdpfx Asyag Umsa Uscw Automatic sequence bending Automatic development Database for tooling and workpieces ...  2 front supports included  .

Condition: new, Year of construction: 2026, travel -z axis 1200 mm travel -x axis 360 mm Weight 3250 kg NESTO 4 Axis Pro Cnc Wood Lathe Machine TECHNICAL SPECIFICATIONS - Work Piece Dimension Max Diameter 360 mm - Max length 1200 mm - Control Unit TPA Control Unit (ltalian) - Z Axis Movement 1200 mm - X Axis Movement 360 mm - Long Axis Speed (Z) 70 m/min - Short Axis Speed (X) 30 m/min - Vertical Axis Speed (Y)20 m/min - Lathe RPM 4500 rpm (Direct Drive) - lnstalled Power 20 KW - Lubrication Unit ILC Automatie Lubrication - Piece Clamping Pneumatic Piston (7 Bar) - Piece Length AdjustmentEasy adjustment with remote control (keyless, boltless) - Cutting Blade Hardened Triangle Blade Made of Special Steel - Cutting Blade Hardened Rounded Blade Made Of Special Steel - Cutting Blade Debarker Blade - Spindle Motor ATC (Automatie tool changer) 24000rpm spindle (5 Pcs tool changer) - Drawing Program ltalian Cad-Cam Program Special for Our Machine (Pegasus 4 Axis Cad & Cam Program) - Machine Dimension Length: 3870mm * Width:2450mm * Highest: 2150mm - Weight 3250 kg GENERAL SPECIFICATION High-resolution Panasonic Japanese servo motors are used in our machine. The axis that rotates the part has the "Direct Drive" function and can work with a 5 kW servo motor at 4500 rpm. Precision ball screws and nuts are used in all axes. Workpiece length setting can be adjusted with a single knob. This ensures time savings and long-term linearity of the tailstocks. The control unit has a remote control function. In addition, with functions such as job sequencing, detailed reports and display of the three- dimensional state of the workpiece, the TPA control offers the user great convenience. Structure Of Chassis With its reinforced, vibration-free and stable chassis design, it provides accuracy over long production cycles and remains reliable for your machining needs. lt has an impressive frame design that provides reliable precision in operation. Ax1s Movements All axes are driven by servo motors. They allow precise acceleration at high speed. High quality and high precision rails, carriages and racks are used to prevent the movement of the axes from being affected by the slightest vibrations. Central Automatie Lubrieation Unit Automatie Tool Measurement Unit lt is a unit that makes an automatic measurement to measure the length of the cutter located at the end of the spindle motor and milling in the Z axis with the correct dimensions, and can store this information through the control unit. lt offers a convenience that eliminates the need for the user to enter measurements during the change of cutter. Tpa Control Unit (ltalian) TPA control unit has Windows based industrial computer. lndustrial computers enable trouble-free operation in the most demanding conditions. Main features of TPA Controller: lt has Ethercat communication system. -Detailed reporting is available. Bcjdoyk Ia Sjpfx Aa Ujw -lt provides ease of use thanks to its specially designed interface. Thanks to its built-in wireless feature, it allows remote access by connecting to the internet. In this way, you can receive your after­sales support needs instantly from our after Sales Team. CAD/CAM SOFTWARE/ PEGASUS CAD & CAM Cad/Cam Software/ Pegasus Cad & Cam lt is a specially designed Cad Cam program to be used in our machine. Pegasus Cad Cam Drawing program is a versatile software that can be used by designers and engineers to create, modify and analyze 3D models. This softwa...

Condition: good (used), Roche COBAS TaqMan + AmpliPrep Amplification Detector Manufacturer's description; all information is subject to change without notice. Automated real-time amplification and detection analyzer. A high-capacity sample format that enables automated real-time amplification and detection of DNA or RNA for up to four assays simultaneously. In combination with the docking station, this system enables fully automated sample transfer—from the COBAS® AmpliPrep instrument to the COBAS® TaqMan® analyzer. Bjdpfx Aou D D E Rea Uecw Features Works with the COBAS® AmpliPrep Instrument and Docking Station for complete automation of sample preparation, amplification, and detection. Works undocked with the COBAS® AmpliPrep Instrument. AMPLILINK software provides a simple and efficient user interface for the custom-built Windows®-based PC included with the system. Automated and fully docked systems with COBAS® AmpliPrep/COBAS® TaqMan® HIV-1, HCV, and HBV tests are available. Benefits Higher throughput. Continuous operation maximizes laboratory productivity. 4 independently controlled thermal cyclers. Amplification and detection of RNA and DNA within hours. Quantification standard and closed tube format require no user interaction after sample loading. Reduces the risk of sample contamination. Optimizes workflow. Item condition: used, untested. Supplied as shown. Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs on request!

Condition: good (used), Roche MagNA Pure LC Nucleic Acid Preparation Station Description of the manufacturer, all data without guarantee. Bodpfx Ajh Dpxhsa Uecw Services Save time with fast, fully automated isolation of high-quality DNA, RNA and mRNA. Get reliable, reproducible results. Benefit from high flexibility in sample type and volume as well as elution volume and post-elution processes. Benefit from software-assisted set-up of reagents and disposables. Automated pipetting of PCRs into LightCycler ® capillaries (LightCycler ® sample carousels ), LightCycler ® 480 multi-well plates (96-well), PCR plates or strips or tubes. Product description The MagNA Pure LC instrument is a benchtop instrument for rapid, cross-contamination-free nucleic acid preparation and PCR setup. A fully enclosed housing, automatic clot and tip loss detection and sample tracking make the MagNA Pure LC instrument a true "walk-away" instrument. Filtration, centrifugation and other manual steps are completely eliminated. No vacuum pumps or tubing are required. With the piston-driven 8-channel nozzle head and liquid handling with direct displacement, the risk of cross-contamination is reduced to an absolute minimum. The UV decontamination and HEPA filter system ensure maximum safety for samples and the environment.  Item condition: used untested Scope of delivery as shown Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 2024, Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard configuration, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release sequence, including electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic drilling depth extension for end-face drilling. This saves the need to adjust the drilling depth when switching from flat-face to end-face drilling (+10 mm, e.g., with dowel length 35 mm, flat-face drilling depth 14 mm, end-face drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit changeover. - Easy pivoting of the drilling unit from 0° to 90°, assisted by gas cylinders. - 1 clamping beam movable on Y-axis with 3 pneumatic clamping cylinders, for workpieces up to max. 80 mm height. Ideal fence system consisting of: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops. - Quick-change system, easily switchable from right to left stop for mirrored drilling of shelves in carcass construction; also suitable for line boring in system 32. - Side stops and position adjustments, as well as drilling height position, via mechanical digital counters on the support table. - Side stops can be easily folded away for fastest set-up change from carcass to frame or line drilling. - Clamping arms for the clamping beam enable line boring positions up to max. 300 mm. - Optimized three-stage tool system. Includes 1 set of dowel drill bits: - 5 carbide dowel bits, Ø 8x77 mm, right - 4 carbide dowel bits, Ø 8x77 mm, left Basic machine Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard version, equipped with: Bjdpfx Aaoxnlfle Uocw - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release, electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic extension of drilling depth for end drilling saves the need to adjust depth when switching from flat to end drilling (+10 mm, e.g. for dowel length 35 mm, flat-side depth 14 mm and end-side depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill changeover. - Easy pivoting of the drilling unit from 0° to 90°, gas spring assisted. - 1 clamping beam, Y-axis adjustable, with 3 pneumatic clamps for workpieces up to max. 80 mm high. - Ideal stop system comprising: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, quick-change system, easily switched from right to left for mirrored shelf drilling in carcass constructions, also usable for line boring in system 32. - Side stops and adjustable positions, as well as drill height position, via mechanical digital counters on the support table. - Side stops can be folded away easily for shortest retool time from carcass to frame and line boring operations. - Clamping arms for the clamp beam suitable for line-boring positions up to max. 300 mm. - Three-stage optimized tool system. Extraction funnel, dust tested, Ø 120 mm 1 set for line boring in system.

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 2026, Dishwasher Model: R-Line 1500 with base Quick-ready system Euronorm 500 2.4 liters of fresh water consumption 7 washing programs with 3 easy Rinse aid and detergent dosing pump extra deep interior for sheets / tubs 600 x 400 mm DGUV V3 checked Sequence / drain pump Connection: 400 V, 7.7 kW, 16A-CEE plug Bedpfsfffhxjx Aa Uecw Dimensions: 600 x 700 x 1128 mm, WxDxH with warranty Included accessories: 1 plate basket 1 universal basket 1 cutlery basket Inlet and outlet hoses