Used Dmg Milltap 700 for sale (409)

Condition: used, Year of construction: 2007, x-travel 780 mm y-travel 560 mm z-travel 560 mm total power requirement --- kW weight of the machine ca. 12,0 t dimensions of the machine ca. --- m Ppjdpfx Aoyb S Ibecvep

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 11790001067, travel distance X-axis: 200 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 280 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, nominal power (apparent): 40 kVA, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, total height: 2,600 mm, total length: 4,000 mm, total width: 3,000 mm, overall weight: 6,000 kg, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 24, tool diameter: 40 mm, DMG SAUER ULTRASONIC HSC LINEAR 20 HSC Machining Center - Operating voltage: 400 V - Frequency: 50/60 Hz - Rated current: 100 A - Connection: 40 kVA - Input unit X/Y/Z axis: 0.001 mm - Travel measuring system resolution X/Y/Z axis: 0.001 mm - Position tolerance in X/Y/Z axis with direct measuring system: 0.005 mm - Tool holder: HSK-32 E - Max. tool length from spindle nose: 200 mm - Max. tool weight for automatic tool change: 1 kg, total tool weight in magazine: 24 kg - NC rotary table with swivel axis - C-axis clamping surface: 190 mm diameter - Swivel range: 360° - Rotary table speed: 150 rpm - A-axis swivel range: -5/+130° - Loading capacity: max. 10 kg - Including the tool holders shown in the photos in the tool magazine - Also includes an additional external tool changer system (30-position) from manufacturer ROBOWORKER, type: LM 100 Note: The machine can be transported on a standard truck! Note: This item is available immediately! Ppedpfxoyxckvo Acvop FCA D-73235 Weilheim Teck – loaded onto truck

Condition: ready for operation (used), Year of construction: 2009, operating hours: 35,295 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 3,200 mm, total width: 5,400 mm, table width: 900 mm, table length: 700 mm, table load: 1,400 kg, overall weight: 13,000 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 48, product length (max.): 3,400 mm, swivel angle B-axis (min.): -29 °, swivel angle B-axis (max.): 180 °, swivel angle C-axis (max.): 360 °, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 80P duoBLOCK was manufactured in 2009. It features impressive axis travels with X-axis at 800 mm, Y-axis at 1050 mm, and Z-axis at 850 mm. The machine includes a robust table size of Ø 900 × 700 mm and a maximum workpiece weight capacity of 1800 kg. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 80P duoBLOCK vertical machining centre we have for sale. Contact us for further details. • Rotary axes: B-axis (tilting head) -30° to +180°; C-axis (rotary table) 360° continuous • Table size: approx. Ø 900 × 700 mm • Max. workpiece weight: approx. 1400–1800 kg Pedpfx Aoyvhfmjcvspp • Spindle type: Vertical milling spindle • Coolant through spindle (CTS): yes • CE compliant • Condition: Very good working condition; full service history available Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, overall weight: 3,950 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 13,000 W, number of axes: 3, This 3-axis DMG Mori Seiki DMC 635V ecoline was manufactured in 2013. It features an X-axis travel of 635 mm, Y-axis travel of 510 mm, and Z-axis travel of 460 mm. The machine is equipped with a maximum spindle speed of 12,000 rpm and a tool magazine that holds up to 30 tools. If you are looking to get high-quality machining capabilities, consider the DMG Mori Seiki DMC 635V ecoline vertical machining centre we have for sale. Contact us for further details. • Spindle: • Power: 13 kW (40% ED) / 9 kW (100% ED) • Max torque: 83 Nm (40% ED) / 57 Nm (100% ED) • Feed rates: • Rapid traverse: 20–12,000 mm/min • Table / layout (según plano): • Table travel usable: X 635 / Y 510 • Table center to spindle nose aprox.: según esquema (standard DMC 635 V) Ppjdpfx Acjyvghdovop • Hours (según contador foto): • Power on: ~20,933 h • Operating: ~8,347 h

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 730 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 560 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 3D, table load: 500 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 15,000 W, number of axes: 5, This 5-axis DMG MORI DMU 60 Monoblock was manufactured in 2016. It features an X-axis travel of 730 mm, Y-axis travel of 560 mm, and Z-axis travel of 560 mm. The machine is equipped with a powerful motor spindle capable of reaching speeds up to 18,000 rpm and includes a 24-pocket tool changer. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 60 Monoblock vertical machining centre we have for sale. Contact us for further details. • Working area / travel: • Modification: X-axis travel reduced by 100 mm (effective X travel 630 mm) • Main drive & spindle: • Motor spindle SK40 with active cooling • Power: 15 kW (40% duty) / 10 kW (100% continuous) • Tooling system: • Tool holder: SK40 (DIN 69871) • Tool clamping: DIN 69872 • Tool changer: Pick-up system • Magazine: 24 pockets (SK40) • Work table: • Integrated NC rotary table in rigid table Psdpoyvfpbefx Acvspp • Rotary table Ø 600 mm; total table 1,000 x 600 mm • T-slots: 1x 14 H7 (alignment, centered) + 8x 14 H12 (clamping) • T-slot spacing: 63 mm • Permissible load: 500 kg • Milling head: • Controlled NC-swivel B-axis with hydraulic clamping • Spindle offset: 100 mm • Swivel range: -120° to +30° • Control system: • Electronic handwheel iTNC 530 • Control language: German Additional equipment • Workpiece measurement: Heidenhain TS 640 infrared probe (SK40) • Tool measurement: Blum laser (in-machine vertical tool length and diameter) • Chip conveyor • Flushing gun with pump (1 bar / 40 l/min theoretical capacity) • Networking: DMG Netservice Basic Package Euro ISDN (Netservice Box, Cisco Euro ISDN Router, license) Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2023, CNC Milling and Turning Center Machine type: DMG Mori CLX 450 TC Control: Siemens 840 D sl Operate Slimline Year of manufacture: 2023 TECHNICAL DATA: Max. turning length: 1,100 mm Turning diameter: 400 mm Main spindle: ISM 65 Speed range: 5,000 rpm Drive power: 14 / 17 kW Torque: 275 / 345 Nm Spindle nose: A2-8 Bar capacity: 67 mm C-axis CNC spindle swiveling for milling and turning operations Max. speed: 12,000 rpm Drive power: 8.8 / 10.5 kW Torque: 73 / 90 Nm Tool interface: HSK 63 Tool stations: 30 Counter spindle: ISM 65 Spindle nose: A2-8 Max. speed: 5,000 rpm Drive power: 14 / 17 kW Torque: 275 / 345 Nm C-axis X-axis: 750 mm Y-axis: 100 mm (+/-) Z-axis: 1,100 mm B-axis: +/- 120 mm Psdpfx Aoyw Hz Ajcvjpp Equipment features: Chip conveyor Direct measuring system Coolant wash-down gun 3-jaw chuck: SMW-Autoblok BBD 250/78 mm 3-jaw chuck: SMW BBD 250/78 mm Tailstock function via counter spindle High-pressure pumps: 8 bar / 20 bar Coolant tank: 600 l Oil mist extractor Probe: Renishaw RMP 40 Automation: Robo-to-Go Short bar feeder magazine

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,443 h, controller manufacturer: FANUC, This 3-axis DMG MORI CLX450 was manufactured in 2019. It features a 12-station tool turret and an integrated sub-spindle for enhanced productivity. The machine is equipped with a 3-jaw chuck on the main spindle. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX450 horizontal turning machine we have for sale. Contact us for further details. Pedpjyu Sc Eofx Acvspp • V3 Version (No counter spindle, no y axis) • no bar loader

Condition: used, Manufacturer: DMG Gildemaster Country of Origin: Italy CNC Control: FANUC 16i-TB with 7 axes CE Declaration of Conformity Technical Data - Number of axes: 7 - Number of spindles: 2 Travel distances: X1 axis: ±30 mm Z1 axis: 120 mm Y1 axis: 195 mm X2 axis: 30 mm Z2 axis: 180 mm MAIN SPINDLE - Max. bar diameter: 12 (13) mm - Travel: 120 mm Ppjdpfxoygl N Ne Acvjp - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm COUNTER SPINDLE - Max. bar diameter: 12 (13) mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm Driven tools: Tool drive power: 1.1 kW Max. speed: 6,000 rpm IEMCA SMART 316 bar feeder Chip conveyor Machine dimensions: approx. 2043 x 1200 x 1750 mm Machine weight: approx. 2,200 kg Main spindle and counter spindle with new bearings!

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 1704 005, spindle bore: 45 mm, total length: 1,850 mm, total width: 1,100 mm, total height: 1,800 mm, spindle speed (max.): 4,000 rpm, overall weight: 2,000 kg, DMG MORI NEF 360 LZ Lead and Feed Screw Lathe Ppjdpfx Aoyvql Necvsp - Operating voltage: 400 V - Frequency: 50 Hz - Connection: 10 kVA - Rated current: 25 A - Centre distance: approx. 750 mm - Centre height over bed: 190 mm - Swing over bed: 380 mm - Centre height over cross slide: 120 mm - Swing over cross slide: 240 mm - Spindle bore: approx. 45 mm The machine is equipped with a tailstock, a Multifix tool holder, as well as a HAINBUCH clamping system, diameter: 140 mm, and a two-axis digital readout by DMG MORI. Please note: The item must be collected firmly between 12/05 and 22/05/2026 at an exact date to be agreed. FCA D-74821 Mosbach – loaded onto truck

Condition: used, Year of construction: 2019, For sale is a DMU125P duoBlock in like-new condition! The machine ran for only about 3,500 hours. - Immediately available - Worldwide Export Installation plans/transport data see photos. Construction year: 2019 Control: Heidenhain TNC640 Travel: X-1.250 mm, Y-1.250 mm, Z-1.000 mm table size: 1.250 x 1100 mm max. table load: 2.800 kg Milling head: A-axis -125 / + 35° x table: NC rotary table Spindle mount: HSK-A63 Spindle speed: max. 15,000 rpm tool magazine: 63 places Internal coolant supply (IKZ): 80 bar, frequency-controlled, suction, cooling device Blasluft probe: Heidenhain Measuring: 3D quickSET operating mode: 4 electric handwheel: Heidenhain Machine monitoring: MPC Machine Protection Control Pjdpeywuklsfx Acvopp Linear axes X/Y/Z Rapid traverse speed: 60 m/min machine weight: 27.000 kg

Condition: ready for operation (used), Year of construction: 2013, operating hours: 35,000 h, travel distance X-axis: 300 mm, travel distance Z-axis: 800 mm, spindle motor power: 48,000 W, spindle speed (max.): 4,000 rpm, controller manufacturer: SIEMENS, controller model: 840 D, number of axes: 4, This 4-axis DMG MORI CTX Beta 800 4a was manufactured in 2013. It features a powerful Mailspindle ISM 102 with a speed of 4,000 rpm and an efficient 8/20 bar coolant system with a 600 L capacity. The machine is equipped with a 16-place star turret and a barfeeder for enhanced productivity. If you are looking to get high-quality turning capabilities, consider the DMG MORI CTX Beta 800 4a turn-mill centre we have for sale. Contact us for further details. • Coolant system: 8/20 bar, 600 L, with paper band filter • External coolant for main and sub spindles • Draw tube: 104 mm • Turrets: 2 x 330 mm VDI30, 16-station star turrets Additional equipment • Bar feeder IF • IRCO bar feeder SIMAG 80.1-R, 3200 mm Pedpfx Ajyuc Apscvepp Technical Specification Driven Tools Yes Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2013, operating hours: 31,460 h, travel distance X-axis: 935 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 650 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 HSCI, table load: 1,500 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 60, number of axes: 5, This 5-axis DMG MORI DMU 85 monoBLOCK was manufactured in 2013. It features an impressive X-axis travel of 935 mm, Y-axis travel of 850 mm, and Z-axis travel of 650 mm. The machine includes a robust table size of 1,040 mm and a maximum table load of 1,500 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 85 monoBLOCK vertical machining centre we have for sale. Contact us for further details. • Max feedrate: 40,000 mm/min • Table size: Ø 1,040 mm • Through-spindle coolant: 20 bar • Operating mode 4: machining process control (work with open work area door allowed) • Repairs/maintenance: • C-axis seal replaced just after warranty (improved version) • Spindle replaced (05/2021) • Machine measured last year – circular interpolation (Ballbar) within tolerance • Typical use: • Duralumin machining 80% overall • 3-axis: 50% • 5-axis: 40% (up to 10% 5-axis continuous) Additional equipment • Measuring probe: TS649 • Tool probe: Blum Laser • 3D quickSET • Electric handwheel • Rinsing gun • Chip conveyor Technical Specification Taper Size HSK 63 Ppjdpfx Acsyt Rdrovjp

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 200 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 280 mm, table load: 100 kg, spindle speed (max.): 42,000 rpm, number of axes: 5, This 5-axis DMG MORI HSC 20 was manufactured in 2019. It features a maximum spindle speed of 42,000 rpm and a clamping surface of 450 × 400 mm. The integrated tilting rotary table allows for a tilt range of -15° to +130°, enhancing its versatility. If you are looking to get high-quality machining capabilities, consider the DMG MORI HSC 20 vertical machining centre we have for sale. Contact us for further details. • Fixed table with T-slots • Clamping surface: 450 × 400 mm • Spindle interface: HSK-E32 • Spindle torque: 6 Nm (S1 100%), 7.5 Nm (S6 40%) • Automatic tool changer, pickup system • Tool magazine capacity: 24 tools (HSK-32) or 22 tools (HSK-40) • Air blow through spindle axis • Ethernet interface ready • CELOS control system with Siemens 840D sl Operate • 21.5” ERGOline touchscreen control panel • CAD/CAM connectivity • Compatible with PPS/ERP systems • 5-axis precision package • Integrated tilting rotary table • A-axis tilt range: -15° to +130° • C-axis rotary table diameter: Ø250 mm • C-axis integrated torque motor • Maximum rotary speed: 50 rpm • 4-color machine status signal lamp • Remote diagnostic capability (DMG MORI NETSERVICE) • IoT connectivity (DMG MORI IoTconnector) • Remote service monitoring (Service Agent) • Machine installation and commissioning included • 3D STEP model for CAD integration • Permanent lubricated spindle Psdpfx Acsyt Nxzsvjpp Additional equipment • Automatic pallet/part handling automation PH10 • Linear magazine automation system • Pallet capacity: up to 132 positions (ITS 50) or 66 positions (ITS 115) • Maximum workpiece height (automation): 260 mm • Machine transport lifting device • Machine packaged for truck transport

Condition: used, Year of construction: 2001, machine/vehicle number: IntNr231491, Manufacturer: DECKEL MAHO, Model: DMF 220 linear, Year of manufacture: 2001 Control system: Siemens 840D Powerline Travel and Axes X-axis (longitudinal): 2,200 mm Y-axis (transverse): 560 mm Z-axis (vertical): 720 mm Rapid traverse X/Y/Z: 50 m/min X-axis drive: High-dynamic linear drive Work Table Clamping surface: 2,600 x 600 mm Max. table load: 2,200 kg Main Spindle Speed range: 20 - 12,000 rpm (standard) Drive power (100% duty cycle): 35 / 25 kW (S1/S6) Max. torque: 130 / 87 Nm (at 100% duty cycle) Tool holder: SK 40 according to DIN 69871 Tool Changer Ppodpfx Acsyvt S Esvop Number of stations: 30-position magazine Tool change time (chip-to-chip): approx. 4-6 seconds (depending on model) Dimensions & Weight Space requirement approx.: 6,500 x 3,500 mm Machine weight approx.: 12.5 t The machine can be inspected under power by appointment. Technical data and specifications subject to change and error; prior sale reserved! Refurbished 5-axis CNC machining center Deckel MAHO DMF 250 linear in good condition. Year of manufacture: 2004. Control: Heidenhain iTNC 530. Technical data: X travel: 2,500 mm. Y travel: 920 mm. Z travel: 820 mm. B-axis: x/- 105° Worktable: 3,100 x 900 mm Spindle interface: HSK 63 Spindle speeds: 20 - 18,000 rpm Tool changer: 30 positions Equipped with: - Chip conveyor - Through-spindle coolant 40 bar - Operating manual Country of origin: Germany Motor power: 35 kW Machine dimensions (LxWxH): 6,000 x 3,800 x 2,950 mm Machine weight: 25,000 kg The machine can be viewed by appointment. Technical data and specifications subject to change and error, as well as prior sale!

Condition: ready for operation (used), Year of construction: 2017, operating hours: 15,208 h, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, overall weight: 12,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 21,000 W, number of axes: 4, This 4-axis DMG MORI NHX 5000 was manufactured in 2017. It features a maximum spindle speed of 15,000 rpm and a travel of 730 mm in both the X and Y axes, with a Z-axis travel of 880 mm. The machine includes a robust pallet size of 500 x 500 mm and a tool capacity of 40 tools. If you are looking to get high-quality machining capabilities, consider the DMG MORI NHX 5000 horizontal machining centre we have for sale. Contact us for further details. • Spindle torque: 111 Nm (continuous 85 Nm) • Tool capacity: 40 tools (optional magazine 60 tools) • Rapid traverse (X/Y/Z): 60 m/min • Acceleration (X/Y/Z): 1G • Pallet size: 500 x 500 mm • Number of pallets: 2 • Automatic rotary pallet changer: 2 stations • NC table B axis: direct drive, indexing 0.001°, max speed 100 rpm • Maximum pallet load: standard 500 kg (optional 700 kg) • Direct position measuring system; Linear scale standard • Control system: CELOS Siemens 840D sl with 21.5" ERGOline multi-touch display • Electronic handwheel: Siemens • Coolant through spindle preparation up to 70 bar • Renishaw probe OMP60 • Tool breakage detection system • Machine status signal lamp • Water-glycol spindle cooling unit • Application Tuning Cycle (ATC) • Machine bed: 3-point support • Power connection: L1 L2 L3 N PE • Connected load: 46 kVA • Maximum input current: 67 A • Fuse protection: 125 A • Short circuit current: 1.25 kA • Maximum supply voltage: 4.0 kV • Supply voltage: 400 V ±10 % • Frequency: 50 Hz • Control voltage: AC 230 V / DC 24 V • Operating time: 27,715 h • Spindle hours: 15,208 h Additional equipment • Knoll KF110/700 • Knoll Flow Monitor Pjdpfx Acoyt Hwzsvepp • High-pressure coolant system • 2x clamping towers (250 x 250 x 650 mm) TRIAG incl. accessories • 95x tool holders HSK63 (various clamping devices) Technical Specification Taper Size BT 40

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1537001259A, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 620, total height: 2,700 mm, total length: 4,000 mm, total width: 2,700 mm, table width: 560 mm, table length: 790 mm, overall weight: 4,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 5,000 h, number of slots in tool magazine: 20, mount diameter: 40 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 35 A, spindle torque (max.): 83 Nm, Equipment: documentation/manual, DMG MORI ECOMILL 635 V CNC Vertical Machining Center Ppedpfeyrfv Hjx Acvjp - Connection: 17 kVA - Setup speed in X/Y/Z: 20 - 2000 mm/min - Travel measuring system X/Y/Z: 1 µ - Positioning uncertainty X/Y/Z: 6 µ - Tool holder: SK 40 - Table with 5 T-slots Attention: All tool holders located in the tool changer are included in the scope of delivery! Attention: The item must be collected, bindingly, between 27.04. and 30.04.2026 on a date yet to be agreed. FCA D-45549 Sprockhövel – loaded on truck

Condition: used, Year of construction: 2007, controller manufacturer: Heidenhain, controller model: iTNC 530, _____ Description: Year of manuf. : 2007 Control : Heidenhain iTNC 530 Speed : 12000 rpm Movement X/Y/Z : 1800/2000/1100 mm Tool holder : HSK 100 In General: Year of manufacture:2007 Control system:Heidenhain iTNC 530 Travel distances X/Y/Z:1,800/2,000/1,100 mm Rotational speed:12,000 rpm Media feed-through:Blast air + cooling lubricant Spindle: Technology:Motor spindle Speed:12,000 rpm Power:44 kW Torque:288 Nm Tool holder:HSK 100 NC swivel head: Technology:Universal milling head B-axis:0°-180° NC rotary table: Technology:Rotary table with pallet carrier Pjdpeyw Dngsfx Acvepp C-axis:360° Clamping surface:1,600 x 1,400 mm Max. table load:4,000 kg Holding torque:approx. 17,000 Nm Tool magazin: Technology:Chain magazine Number of stations:120 Tool changer:Double gripper Equipment: Position sensors:Direct scales in all axes Chip disposal:Chip conveyor Coolant supply:Internal c oolant system, 40 bar Automation:2-fold pallet changer Workpiece measurement:Heidenhain touch probe Tool measurement:Blum Laser NT Kinematics measurement:3D quickSET Process monitoring:Operating mode 4 Emulsion mist separator:Mechanical

Condition: used, CNC lathe Graziano GT 300 Y Gital Gildemeister CNC Fanuc 16i - T ASA 5 Main spindle power 15 Kw Self-centering diameter 175 mm ASA 5 spindle connection Bar passage 52 mm Turning diameter 230 mm Turning length 500 mm Number of revolutions 5000 Number Tool holder turrets1 Number of tool places first turret 12 Number of motorized first turret 12 First turret tool attachment typeVDI 30 X Axis Travel 160 mm Y Axis travel + - 32 mm Z Axis travel 550 mm Linear axis rapid feeds X Y Z30 m/min Counter spindle yes ASA 5 spindle nose Number of counter spindle revolutions 5000 Power sub spindle 9 Kw Spindle Hole 30 mm Model and brand of bar loader LNS single bar tube Belt chip conveyor Presetting yes 2000 The machine can be seen under power in our warehouse in Gussago BS. Mimu machine tools Pjdpoqn E U Tofx Acvjpp

Condition: used, Year of construction: 2004, machine/vehicle number: IntNr231486, Used, refurbished 5-axis CNC machining centre Deckel MAHO DMF 250 linear Year of manufacture: 2004 Control system: Heidenhain iTNC 530 Technical specifications: X-axis travel: 2,500 mm Y-axis travel: 920 mm Z-axis travel: 820 mm B-axis: +/- 105° Working table: 3,100 x 900 mm Spindle interface: HSK 63 Spindle speeds: 20 – 18,000 rpm Tool changer capacity: 30 positions Equipped with: - Chip conveyor - Through-spindle coolant, 40 bar - Operating manual Country of origin: Germany Motor power: 35 kW Machine dimensions (LxWxH): 6,000 x 3,800 x 2,950 mm Machine weight: 25,000 kg Podpsyu Nciofx Acvjpp The machine can be inspected under power by appointment. Technical data and information subject to change and error; prior sale excepted!

Condition: like new (used), Year of construction: 2012, machine/vehicle number: IntNr231419, As-new, completely overhauled CNC 5-axis vertical machining centre DMG DMU 40 eVo linear, year of manufacture 2012, IntNr231419 Control system Brand: HEIDENHAIN Model: 530 Main drive Spindle speed range: 14,000 rpm Number of axes: 5 Travel distances Ppjdjyu Nccspfx Acvjp X-axis travel: 400 mm Y-axis travel: 400 mm Z-axis travel: 375 mm Includes: - Automatic tool changer with 120 SK 40 tool holders - Table rotary feed-through for workpiece clamping - Side door for robot loading - Renishaw tool breakage monitoring - Heidenhain measuring probe - High-pressure coolant system (IKZ) with 600 l tank - Emulsion extraction system - Active spindle cooler - Linear drives for X and Y axes - Glass scales The machine can be inspected under power by appointment. Subject to prior sale and changes or errors in technical data and specifications!

Condition: used, Year of construction: 2004, operating hours: 145,113 h, machine/vehicle number: IntNr231164, For sale: Highly dynamic CNC production turning center Gildemeister Speed 12-5 with IEMCA Smart 316 bar feeder Year of manufacture: 2004 Control: Fanuc 16i-TB Technical data MAIN SPINDLE - Max. bar diameter: 12 (15) mm - Travel: 120 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm COUNTER SPINDLE - Max. bar diameter: 12 (15) mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm Driven tools: - Tool drive power: 1.1 kW - Max. speed: 6,000 rpm Tools: - Number of tools: up to 20 (some driven) - Driven tools: 4–6, for milling, drilling, and threading operations - Tool holder: ER collet chucks or similar systems Ppsdpsyu I Dfsfx Acvsp - Rear machining: 4 stations for backworking IEMCA Smart 316 / 32L bar feeder Year of manufacture: 2006 Bar diameter: 5–32 mm Bar length: 3,200 mm Small extinguishing system / Kraft & Bauer fire suppression system Operating manual Parts separator Chip conveyor system The machine can be inspected under power by appointment. Subject to technical changes and errors, as well as prior sale!

Condition: used, Year of construction: 2016, Technical details: Number of axes: 8 Max. machining diameter: 32 mm Max. headstock stroke: 600 mm spindle speed: 8500 min-1 Pedpfjytp Rqox Acvjpp workpiece diameter: 32 mm workpiece length: 240 mm X-axis : 70 mm y-axis: 405 mm z-axis: 100 mm number of tools: 22 Main spindle capacity: 7,5/5,5 kW : 2,2 kW weight: 3,5 t

Condition: good (used), Year of construction: 2014, operating hours: 21,000 h, functionality: fully functional, DMG MORI DMU 60 Evo 5x simultaneous axis machining center (2014) Manufacturer: DMG Mori Type: DMU 60 Evo 5x simultaneous axes Year: 2014 Condition: good, used, new spindle in 2024 Operating hours: 37,063h Spindle hours: 21,313h Control: Heidenhain ITNC 530 Condition: used, ready for operation Travel x/y/z 600/500/500 mm Rapid traverse 80m/min Speed 20-14,000 rpm Ppedpfoyubz Dex Acvep Tool magazine 30 Tool holder SK40 NC rotary tables 600x500mm Coolant supply 40 bar with band filter system Measuring probe TS649 Documentation

Condition: ready for operation (used), Year of construction: 2017, operating hours: 29,532 h, spindle speed (max.): 10,000 rpm, overall weight: 27,750 kg, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table load: 4,000 kg, number of axes: 5, This 5-axis DMG MORI DMF 260-11 Linear was manufactured in 2017. It features a large table (3200 mm x 1100 mm), high load capacity (4000 kg), and extensive axis travel (X: 2600 mm, Y: 1100 mm, Z: 900 mm). With a spindle speed up to 10,000 rpm and a 60-pocket tool magazine, it's ideal for complex machining tasks. If you are looking to get high-quality milling capabilities consider the DMG MORI DMF 260-11 Linear machine we have for sale. Contact us for more information. Psdpfeyr Sc Hsx Acvspp • Table dimensions: 3200 mm (L) x 1100 mm (W) • C 360° rotary axis • Maximum load capacity: Table 4000 kg / Divider 1200 kg • Tool magazine capacity: 60 pockets Additional equipment • Tool measurement systems: Mechanical and laser (BLUM) Technical Specification Taper Size ISO 50

Condition: used, Year of construction: 1996, x-travel 600 mm y-travel 560 mm z-travel 560 mm Control Siemens size of pallet 400x500 mm Table load 300 kg feed 40.000 m/min spindle speed: 20-8000 U/min Podpfxoyutu As Acvspp spindle taper ISO 40 Spindle capacity 13/20 KW Torque 191 Nm 4-axis horizontal machining center. Dual pallet changer. B-axis table indexing 0.001°. B-axis rapid traverse 40 rpm. KNOLL coolant system with filter and chip conveyor. 40 bar coolant supply via collar. Good condition. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team