Used Dmg Dmf 250 Linear for sale (381)

Year of construction: 1999, condition: used, CNC Steuerung Heidenhain TNC 426 Kuehlmitteleinrichtung Spaenewanne CNC control Heidenhain TNC 426 coolant device chip tank Technische Daten / technical details: Csdpfx Agedk Rwnjzepw X-Weg / X-travel 600 mm Y-Weg / Y-travel 525 mm Z-Weg / Z-travel 500 mm Spindeldrehzahlen / spindle speed 6300 UpM /rpm Werkzeugaufnahme / spindle taper SK40 Vorschubbereich X/Y/Z / feed range 10000 mm/min. Universaltisch / clamping area of universal table 750x530 mm Gewicht der Maschine ca. / weight 6500 kg

Condition: like new (used), Year of construction: 2018, operating hours: 3,666 h, functionality: fully functional, turning length: 685 mm, turning diameter over cross slide: 650 mm, spindle speed (max.): 4,000 rpm, spindle bore: 91 mm, travel distance X-axis: 267 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, spindle nose: A2-8, overall weight: 5,400 kg, Equipment: documentation/manual, rotational speed infinitely variable, The machine is operational and set up in our showroom, and can be inspected by appointment! This DMG MORI CLX 450 V3 comes standard with: - 19" SlimLine PLC with TouchScreen. - Siemens electronic handwheel. - Chip conveyor. - High-pressure pump (12 bar). Codoyh Inhjpfx Agzopw - Unused 3-jaw chuck (SMW AUTOBLOK KNCS-N-260-78 Ø260). - Various VDI-40 tool holders (static). - MARPOSS measuring arm incl. calibration holder (VDI-40). - Mechanical preparation for mist extraction unit. - Double foot pedal for clamping/unclamping main spindle. - Rinsing gun (5 bar) - Original DMG documentation. - Set of chemical anchors.

Condition: good (used), Year of construction: 2011, Ref. -No.: 10615 Manufacturer: DMG Type: DMU 210 P Year of construction: 2011 Type of control: CNC Control: Heidenhain ITNC 530 Storage location: Halberstadt Csdpfx Agjym Nfhozepw Country of origin: Germany Machine-No.: 128/XXXX X-Travel: 1800 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Swivel range: -30 / +180 ° Table Load: 10000 kg Max. rotary table diameter: 1700 O Table speed range: 12 min/-1 Tool Taper: SK 50 Numbers Of Tools In Magazin: 60 Weight Of The Machine Ca.: 41 t Motor spindle: 24000 RPM Feed drive A, C: 30 min/-1 horizontal milling head: 130-1.380 mm vertical milling head: 230-1.480 mm Further information: The machine can be viewed while powered up.

Condition: good (used), Year of construction: 2010, Ref. -No.: 10287 Manufacturer: DMG Type: DMC 210 FD Year of construction: 2010 Type of control: CNC Control: Heidenhain Mill Plus Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2100 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Machine length: 11.000 mm Machine width: 5.000 mm Machine Height: 3.500 mm Max. Workpiece diameter: 2500 mm Max. Workpiece Weight: 6.000 kg Max. rotary table diameter: 1.850 O Table speed range: 250 min/-1 Tool Taper: HSK-A100 Tool Piece Magazine With: 183 Pcs./pcs. Spindle Speed: 12.000 RPM Max. Torque On The Boring Spindle: 288 Nm Max. Torque: 2.000 Nm Feed Speeds X/Y/Z Axis: 30.000 mm / min Max. Workpiece height: 1.460 mm axes: 5 Further information: Cpedpfx Agjym I U Ijzew Turning and milling center incl. pallet changing system Gear spindle Coolant treatment system, with belt filter, 710 x 50mm 1 Knoll 600S2 chip conveyor 2 Losma oil mist extraction units 1 steel platform (storage space for clamping device): 5,300 x 2,900 mm - Axes renewed 11.2024 - New encoder, electrical components renewed - Geometry protocols available Machine is still in production and under power. The machine can be viewed at any time by appointment.

Condition: excellent (used), Year of construction: 1998, operating hours: 54,400 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 400 mm, controller manufacturer: Heidenhain, controller model: 426, spindle speed (max.): 30,000 rpm, 5-axis machining center Manufacturer: DMG Model: DMU-50V Year of manufacture: 1998 Control: Heidenhain TNC-426 Power-on hours: approx. 54,400 h Cpjdoynb Iqepfx Agzew Spindle hours: approx. 12,900 h S/N: XXXXX Technical data: ----- - Travel X-Y-Z: 500 x 380 x 400 mm - NC rotary/swivel table 360° / 500 x 380 mm - Spindle: 30,000 rpm - Tool holder: HSK-50 - Tool magazine: 24 stations - Coolant system - Chip conveyor: no - Automatic tool measurement - Connected load: 26 kVA - Weight: approx. 4.0 t Accessories: ----- - Manuals - Electronic handwheel - 20x HSK-50 tool holders

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, overall weight: 4,500 kg, Heidenhain TNC 426 travels 800X500X500 mm Codpfxeylhybs Agzepw table 800X500 mm BT 40 tool changer

Condition: like new (used), Year of construction: 2012, operating hours: 24,864 h, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 375 mm, controller manufacturer: Heidenhain iTNC 530, workpiece diameter (max.): 380 mm, workpiece weight (max.): 2,500 kg, total height: 2,480 mm, total length: 1,970 mm, total width: 2,730 mm, overall weight: 6,900 kg, spindle speed (min.): 18,000 rpm, spindle motor power: 35,000 W, Year of construction: 2012 Cpodpfx Ajyi Am Dsgzjw CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 400 Y-axis travel mm: 400 Z-axis travel mm: 375 C-axis degrees: 360º (0,001) B-axis degrees: -5º / +110º Distance spindle nose - table surface mm: 125-500 Feed rates m/min: 80 Rapid traverse m/min: 80 Acceleration in the axes m/s2: 10 Milling/turning table nc: Table dimensions mm: 450x400 Maximum workpiece size (D x H) mm: Ø380 Max. workpiece weight kg: 250 Table rotation speed rpm: 1200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Cooling Cooling through the Spindle Center bar: 40 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter 3D quickSET Heat compensator Direct measuring system XYZ Electrical cabinet active cooling unit Oil skimmer Ready for internal cooling (40/80 bar) RENISHAW Measuring probe Automatic door Machine running times Under power: 46650 Spindle Working: 24864 Rated power kVA: 46 Basic machine dimensions / weight Length mm: 1970 Width mm: 2730 Height mm: 2480 Weight kg: 6900

Condition: good (used), Year of construction: 2008, Vertical CNC Lathe Machine type: Gildemeister CTV 400 V3 Control: Sinumerik 840D powerline (XP) Year of manufacture: 2008 TECHNICAL DATA: X-axis: 700 mm Z-axis: 340 mm C-axis Max. spindle speed: 3,500 rpm Drive power: 47 kW Torque: 1,100 Nm Direct drive Number of turrets: 1 Tool stations: 12 Driven tools: 12 Tool holder: VDI 50 Number of pallets: 15 Accessories: Cedpfx Agjw Rbcyozepw

Condition: good (used), Year of construction: 2000, operating hours: 48,804 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: Siemens, controller model: Sinumerik 840D, total length: 7,000 mm, total width: 5,000 mm, table width: 400 mm, table length: 500 mm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 23,574 h, coolant supply: 50 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Very well-maintained 4-axis machining center from precision manufacturing. The machine has been serviced regularly, is immediately ready for operation, and comes with a pallet changer and extensive accessories. Ideally suited for tool and mold making or series production. Technical Specifications -Travel distances: X 600 mm / Y 560 mm / Z 560 mm -B-axis: 360° x 0.001° (60 rpm) -Spindle speed: 0 – 8000 rpm (stepless) Cpjdpfxsx Icyvs Agzew -Control: Siemens Sinumerik 840D -Table size: 6 pallets, each 500 x 400 mm -Table load: 350 kg -Working feed: 1 – 60,000 mm/min -Rapid traverse: 60 m/min Tool & Magazine -Tool holder: DIN 69871-SK40 -Chain magazine with 90 positions -Max. tool diameter: 80 mm -Max. tool length: 350 mm -Max. tool weight: 10 kg -Max. total magazine weight: 450 kg -Tool change time: 5 sec -Pallet change time: 6 sec Machine Requirements & Dimensions -Motor power: 13 kW / 20 kW -Torque: 124 / 191 Nm -Total power requirement: 20 kW -Machine weight: approx. 16,000 kg -Required floor space (LxW): 7 x 5 m Equipment & Accessories -Coolant system approx. 1100 L (internal & external) -Knoll cooling unit with drum filter (30/40/50 bar via M-command) -Chip conveyor -Tool measurement: Renishaw probe -Tool breakage detection in the machining area -Pallet storage (4 positions) -Pallet sequence operation -Enclosed work area in accordance with UVV -Network capability -Technical documentation & installation layout available Components Renewed -Hydraulic system motor & pump replaced -Some hydraulic and pneumatic hoses replaced -Control cabinet LT module exchanged -Drum of Knoll system replaced Operating Hours / Run Times - Power-on hours approx. 48,804 h (counter runs when the machine is switched on, including during setup, maintenance, or idle times) - Spindle run time total 23,574 h Special Features - Machine live, immediately ready for use - Inspection possible any time by appointment - No dealer sale – machine comes directly from production - Technically inspected, no known defects - Assistance with disassembly, loading, and transport possible (for an additional charge) All information has been provided to the best of our knowledge and belief. Subject to alterations, errors, and prior sale.

Condition: good (used), Year of construction: 2009, Ref. -No.: 10616 Manufacturer: DMG Type: DMU 210 P Year of construction: 2009 Type of control: CNC Control: Heidenhain ITNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 257XXXX X-Travel: 1800 mm Y-Travel: 2100 mm Z-Travel: 1250 mm B-Axis: -30 / +180 ° C-Axis: 360 ° Table Load: 8000 kg Clamping Area: 1.700 mm Tool Taper: SK 50 Spindle Speed: 10.000 RPM Max. Torque: 288 Nm Total Power Requirement: 38 kW No. Of Working Stations: 60 Csdsx R R Hcopfx Agzepw Internal cooling: 40 bar Holding torque: 22.700 Nm Further information: - The DMG DMU 210 P 5-axis machining center is suitable for high-precision machining of large, heavy workpieces. The machine can be viewed under power.

Condition: not inspected (used), Year of construction: 1989, We are offering, as part of an insolvency liquidation: 2 x CNC lathes (1 x sub-spindle, 1 x lower turret), used Cedpfsx Ed A Dex Agzepw + Bar feeder + Accessories 1. CNC Lathe with Sub-Spindle Make: MIYANO Model: BNC 34-S Year: 1989 Control: Fanuc 0-T - Bar feeder HYDROBAR - 2 x collet chucks - 1 x 3-jaw chuck 2. CNC Lathe with 2 x turrets Make: MIYANO Model: JNC 45-T Year: 1989 Control: Fanuc 0-T Bar feeder HYDROBAR - 1 x collet chuck - 1 x 3-jaw chuck 3. Accessories - Approx. 65 collets - Approx. 40 sets of jaws - Various tool holders + tools - Documentation The machines are untested, but were in operation until the end. The machines have been dismantled and the price includes loading.

Condition: not inspected (used), Year of construction: 1989, We are offering, as part of an insolvency liquidation: 2 x CNC lathes (1 x sub-spindle, 1 x lower turret), used + Bar feeder + Accessories 1. CNC Lathe with Sub-Spindle Make: MIYANO Model: BNC 34-S Year: 1989 Control: Fanuc 0-T - Bar feeder HYDROBAR - 2 x collet chucks - 1 x 3-jaw chuck 2. CNC Lathe with 2 x turrets Make: MIYANO Model: JNC 45-T Year: 1989 Control: Fanuc 0-T Bar feeder HYDROBAR - 1 x collet chuck - 1 x 3-jaw chuck Cpsdeym Tidspfx Agzjw 3. Accessories - Approx. 65 collets - Approx. 40 sets of jaws - Various tool holders + tools - Documentation The machines are untested, but were in operation until the end. The machines have been dismantled and the price includes loading.

Condition: not inspected (used), Year of construction: 2007, operating hours: 43,558 h, functionality: unexamined, machine/vehicle number: 07400003691, turning diameter: 120 mm, spindle speed (max.): 5,000 rpm, spindle bore: 118 mm, controller model: SIEMENS SINUMERIK 840 D POWERLINE, distance between spindles: 900 mm, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates the buyer to collect the item within the specified time frames: either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Maximum main spindle speed: 5,000 rpm Maximum sub spindle speed: 3,200 rpm Swing diameter: 270 mm Turning diameter: 120 mm Maximum bar diameter: 100/104 mm Spindle bore diameter: 118 mm Distance between spindles: 900 mm Travel X1-axis: 290 mm Travel Z1-axis: 650 mm Travel X2-axis: 180 mm Travel Z2-axis: 650 mm Travel Y1-axis: ±40 mm Travel Z3-axis: 670 mm Travel X3-axis: 175 mm Rapid traverse X/Z-axis: 30 m/min Rapid traverse Y-axis: 15 m/min Number of tool turrets: 2 Number of tools per turret: 12 All tool positions are driven MACHINE DETAILS Control system: SIEMENS SINUMERIK 840 D POWERLINE Cedpfx Asym A S Iogzopw Dimensions & Weight Dimensions (L x W x H): 5,500 x 2,500 x 2,500 mm Machine weight: 11,000 kg Operating hours: 88,040 h Spindle hours: 43,558 h EQUIPMENT Chip conveyor Foot switch Note: The machine has the following defects: - The B-axis is defective (located on turret 1) - The guideways and drives are worn in line with the machine’s age - The X2-axis (guide rails) runs slightly out of alignment in the range of 0.03 mm (re-measurement required) - Setting the reference values for the axes in the control system is not functioning - The hydraulic pump was replaced by a spare pump after failure and is now set up externally as a separate unit External reference: Bilstein - Lot 2

Condition: like new (used), Year of construction: 2015, operating hours: 26,915 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, nominal power (apparent): 30 kVA, controller manufacturer: M-730UM, workpiece weight (max.): 1,000 kg, total height: 2,800 mm, total length: 3,300 mm, total width: 3,000 mm, table width: 600 mm, table length: 1,100 mm, spindle speed (min.): 8,000 rpm, Year of construction: 2015 CNC controller: M-730UM Axes X-axis travel mm: 800 Y-axis travel mm: 530 Z-axis travel mm: 510 Distance spindle nose - table surface mm: 150-660 Cjdpoxwxc Aofx Agzopw Feed rates m/min: 5 Rapid traverse m/min: 30 Worktable Number of pallets: 1 Table dimensions mm: 1100x600 Max. workpiece weight kg: 1000 Spindle Spindle speed rpm: 8000 Spindle drive power kW: 30/22 (25%ED/cont) Spindle torque Nm: 304 Tool system Tool holder: MAS-BT 50 Tool magazine slots: 30 With free neighboring places mm: 240 With occupied neighboring places mm: 120 Max. Tool Length mm: 350 Max tool weight kg: 20 Tool-to-tool time s: 2.34 Equipment Chip conveyor Internal cooling lubricant supply 4th axis DDRT-260X Custom Macro common variables (200) Machine running times Under power: 35896 Spindle Working: 26915 Rated power kVA: 52 Basic machine dimensions / weight Length mm: 3300 Width mm: 3000 Height mm: 2800 Weight kg: 6870

Condition: like new (used), Year of construction: 2015, operating hours: 3,886 h, functionality: fully functional, turning length: 685 mm, turning diameter over cross slide: 650 mm, spindle speed (max.): 4,000 rpm, spindle bore: 91 mm, travel distance X-axis: 267 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, chuck outer diameter: 250 mm, swing diameter over cross slide: 650 mm, spindle nose: A2-8, overall weight: 5,200 kg, Equipment: documentation/manual, rotational speed infinitely variable, This DMG MORI CLX 450 V3 is standard equipped with: - PROGRESSLine (display of remaining production time and piece count for a complete machining process). - Interface for barfeeder. - Chip conveyor. - High-pressure pump (12 bar). - New 3-jaw chuck (SMW AUTOBLOK type BB-D Ø250) incl. sets of jaws. - Workpiece catcher/dispenser. - Original DMG mist extraction system. - Foot pedal for clamping/unclamping main spindle. Cjdpfsyguqiex Agzopw - Rinsing gun (5 bar). - Original DMG documentation.

Condition: good (used), Year of construction: 2003, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, workpiece weight (max.): 4,000 kg, number of slots in tool magazine: 120, controller manufacturer: Heidenhain, total height: 2,800 mm, total length: 6,000 mm, total width: 6,000 mm, overall weight: 12,000 kg, table length: 630 mm, table width: 500 mm, controller model: iTNC530, nominal power (apparent): 61 kVA, rapid traverse Z-axis: 50 m/min, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, spindle speed (max.): 18,000 rpm, spindle speed (min.): 20 rpm, table load: 4,000 kg, operating hours of spindle: 19,500 h, Equipment: chip conveyor, rotational speed infinitely variable, DMG DMC 60T RS3 with Heidenhain iTNC 530, no maintenance backlog, in good condition. Ideal machine for unmanned operation, geometrically within new-machine tolerance. The machine can be inspected and measured on site by arrangement. Machine Data: Machine description: Machining centre with pallet storage Manufacturer: DMG MORI Model: DMC 60T RS3 Year of manufacture: 2005 Condition: good Equipment: - Direct linear measurement in X/Y/Z (glass scales) - Chip conveyor - High-pressure coolant system 40 bar (IKZ) - Extraction unit - NC rotary table - Tool magazine, 120 positions - Heidenhain measuring probe - Rotating viewing window - High-pressure coolant 40 bar - Signal lamp - Chip flushing - Operating mode 4 Technical Data: Csdporxrklsfx Agzepw Number of axes: 5-axis Control: Heidenhain iTNC 530 NC rotary table clamping surface: 500 mm x 630 mm Weight: approx. 9,000 kg Chip conveyor: Yes Coolant system: Yes Internal coolant supply: Yes Travels and axes: X-axis: 780 mm Y-axis: 560 mm Z-axis: 560 mm C-axis: 360° B-axis: -90°/+12° Feed rates and rapid traverse: X-axis: 50 m/min Y-axis: 50 m/min Z-axis: 50 m/min B-axis: - C-axis: 30 m/min Motor spindle: Max. speed: 18,000 rpm Spindle taper: HSK A63 Tool changer: Automatic tool changer: Yes Number of magazine positions: 120 Pallet changer: 5 pallets

Condition: excellent (used), Year of construction: 2006, operating hours: 32,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, torque: 121 Nm, controller manufacturer: Siemens, table width: 700 mm, table length: 900 mm, table load: 1,400 kg, rotational speed (min.): 20 rpm, rotational speed (max.): 18,000 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 32,000 h, coolant supply: 40 bar, spindle nose: HSK63A, number of slots in tool magazine: 30, tool length: 350 mm, tool diameter: 100 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMG MORI DMU 80P duoBlock Cedjw Ht Ibjpfx Agzspw Year of manufacture: 2006 Operating hours: 62,000 h Spindle hours: 31,000 h Function tested and cleaned Maintenance performed according to manufacturer's specifications Geometry within new machine tolerance Equipment: 5 axes Swivel head (controlled B-axis) Direct linear measurement in X/Y/Z (glass scales) Chip conveyor Extraction system NC rotary table Tool magazine with 30 positions Heidenhain touch probe BLUM laser Handwheel Rotating viewing window ICS 40 bar (internal coolant supply) Chip flushing Operating mode 4

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, operating hours: 69,000 h, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, number of slots in tool magazine: 40, controller manufacturer: Siemens, total height: 2,800 mm, total length: 7,000 mm, total width: 4,000 mm, overall weight: 10,000 kg, table length: 800 mm, table width: 630 mm, controller model: Sinumerik 840D powerline, coolant supply: 40 bar, nominal power (apparent): 69 kVA, rapid traverse Z-axis: 50 m/min, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, spindle nose: HSK63, spindle speed (max.): 12,000 rpm, spindle speed (min.): 20 rpm, table load: 800 kg, operating hours of spindle: 27,000 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMG MORI DMC 80U Year of manufacture: 2002 Operating hours: 69,000h Spindle hours: 27,000h Cedpsv Eurmjfx Agzjpw Equipment: 5-axis Swivel head Direct path measurement in X/Y/Z (glass scales) Chip conveyor Extraction NC rotary table as an add-on table Pallet changer Tool magazine 60 places Heidenhain measuring probe Handwheel Rotating viewing window IKZ 40 bar Chip flushing Operating mode 4 + Machine technically serviced and in very good condition + Geometrically within new machine tolerance + Transport and commissioning can be offered separately

Condition: used, CNC Lathe DMG MORI SEIKI - GILDEMEISTER Type CTX 310 ecoline Machine No. 8044001846E Year of manufacture: 2013 CNC control: SIEMENS Sinumerik 840D sl Swing diameter over bedway cover: 330 mm Swing diameter over cross-slide cover: 260 mm Center height: max. 190 mm Center distance: max. 580 mm Csdpfx Agoyk Hrgjzepw Turning diameter: max. 200 mm Longitudinal slide travel (Z-axis): max. 450 mm Cross slide travel (X-axis): max. 160 mm Spindle bore through draw tube: 51 mm Spindle bore at front bearing: 100 mm Spindle speed: max. 5000 rpm Feed rate for X and Z axes: mm/min Rapid traverse rate X-axis: 30 m/min Rapid traverse rate Z-axis: 30 m/min Feed force X and Z: 4500 Nm Turret: 12 stations Driven tool stations: 6 stations Tool holder: cylindrical, VDI 30 mm Spindle drive motor power at 100% duty cycle: max. 11 kW Spindle drive motor power at 40% duty cycle: max. 16.5 kW Electrical connection: 400 Volt, 50 Hz, 21 kVA - CNC control SIEMENS Sinumerik 840D sl, system software NCU V04.04+SP02+HF02 - Controlled C4-axis (chuck position) and C1-axis for tool turret - 3-jaw power chuck AUTOGRIP Ø 210 mm with 1 set of hard jaws and 15 sets of soft jaws - Hydraulic hollow chucking device AUTOGRIP - Tool turret SAUTER, type 0.5.901.020 with 12 stations (6 of which are driven) - 20 tool holders VDI 30 - Tailstock MK 4 - Indirect measuring system via rotary encoder - Chip conveyor with integrated coolant system - Workpiece remaining run-time display and part counter as large display on machine enclosure - Electrical cabinet cooling unit - 9716 total operating hours (main switch on), of which 3322 spindle hours, as read from the meter - Operating instructions and manuals Machine footprint with chip conveyor (L x W x H): 4500 x 2600 x 2050 mm Basic machine footprint (L x W x H): 2900 x 2150 x 2050 mm (3200 kg) Chip conveyor footprint (L x W x H): 3350 x 850 x 1650 mm (500 kg) Weight: approx. 4 tons Very good condition

Condition: ready for operation (used), Year of construction: 2011, Make: DMG Type of machine: DMC 60 T Year of manufacture: 2011 Control system: Heidenhain iTNC 530 Machine's weight: ca. 9 t Tool holder: SK 40 x-travel: 780 mm Cjdpsxg Tdysfx Agzspw y-travel: 560 mm z-travel: 560 mm Speed range: 12.000 1/min Number of tools in the magazine: 120 Pl. Internal coolant supply: 40 bar. 3D Measuring probe: Heidenhain TS641 : 360 ° : x

Condition: ready for operation (used), Year of construction: 2007, Make: DMG Type of machine: Nef 600 Year of manufacture: 2007 Control system: Fanuc 210 is Machine's weight: 5,5 t Tool holder: VDI 40 x-travel: 320 mm z-travel: 1250 mm Speed range: 3000 U/min Cutting diameter: 600 mm Turning length: 1250 mm Overall dimensions: 4000 x 2200 x 2000 mm Tool turret - slots: 8 Pl. Spindle opening: 90 mm Csdpoxnpbqofx Agzopw

Condition: ready for operation (used), Year of construction: 2000, Make: DMG Type of machine: DMU 50 Evolution Cedpfoxnphdjx Agzopw Year of manufacture: 2000 Control system: Heidenhain iTNC 360 Machine's weight: 6000 kg Tool holder: SK 40 x-travel: 500 mm y-travel: 420 mm z-travel: 380 mm Speed range: 12.000 U/min Overall dimensions: 3360 x 2550 x 2600 mm Number of tools in the magazine: 30 Pl. : x

Condition: ready for operation (used), Year of construction: 2003, Make: DMG / DECKEL MAHO Type of machine: DMC 70 eVolution Year of manufacture: 2003 Cpsdpfoydfbmox Agzjw Control system: MillPlus Tool holder: SK40 x-travel: 700 mm y-travel: 550 mm z-travel: 500 mm Speed range: 12.000 U/min max. Table load: 800 kg Table dimensions: 900 × 550 mm

Condition: good (used), Year of construction: 2011, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, Manufacturer: DMG Type: DMC 635 V PW Year of manufacture: 2011 Control: Heidenhain iTNC 530 Machine weight: approx. 6000 kg Tool holder: SK 40 X travel: 635 mm Y travel: 510 mm Z travel: 460 mm Speed range: 14,000 rpm Max. table load: 400 kg Operating hours: 61,000 Csdov S Af Uepfx Agzepw Spindle hours: 43,000 Space required: approx. 4.5 x 5.5 x 2.7 m Table size: 56 x 790 mm Number of tools in magazine: 60 pcs Internal coolant supply: 40 bar 3D measuring probe: TS 640

Condition: ready for operation (used), Year of construction: 2014, operating hours: 5,807 h, Control Unit Brand HEIDENHAIN Model TNC 640 Main Drive Spindle speed range 14000 Tool taper SK40 Number of axis 3 Movement X-Axis Movement 650 mm Y-Axis Movement 520 mm Cpsdpex D Rxcsfx Agzew Z-Axis Movement 475 mm Media Chip conveyor Yes Internal cooling Yes Additional Equipment Grid plate for clamping fixtures and vices pitch: 50x50 12H7/M12 This 3-axis DMG MORI DMC 650V was manufactured in 2014. It features a spindle speed of 12000 rpm, X/Y/Z travels of 650/520/475 mm, and rapid feeds up to 36 m/min. The machine includes a SK40 tool taper, a 20-position tool magazine, and a chip conveyor. If you are looking to get high-quality milling capabilities, consider the DMG MORI DMC 650V machine we have for sale. Contact us for more information. Application Types Milling