Used Dm Italia for sale (6,622)

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 200642, volume flow: 3,200 m³/h, RIEDEX - Deduster Model DM-200/M-B max. volume flow 3200 m³/h motor power 4.0 kW without extinguishing device Left-hand version motorized cleaning Bwodpfetwz Hlox Adxjw with chip garbage cans

Condition: new, Year of construction: 2025, total width: 2,000 mm, total height: 2,000 mm, total length: 1,620 mm, working width: 1,100 mm, overall weight: 1,000 kg, power: 12 kW (16.32 HP), input current: 20 A, sheet thickness (max.): 120 mm, sheet thickness steel (max.): 120 mm, Deburring up to 1100mm. Deburring of metal-cut parts up to 1100mm wide. Bjdpfx Astzfpkodxeww DM1100 Z finishes and deburrs light metal sheets cut by laser, punching or shearing. This machine has a single wide belt station that can be used to deburr parts with a size of 50×50 mm and a width of up to 1100 mm. The DM1100 Z is also suitable for surface finishing, where it can be used with both standard sandpaper and non-woven/scotch belts. DM1100 Z Working capacity (mm) 1100x120 No. of belt stations (Z) 1 Sanding belt, dimensions (mm) 1100x1850 Sanding drum specifications Ø186mm Sanding belt speed (m/s) 8-22 Feed speed (m/min) 1.5-10 Sanding belt motor per head (kW) 11 Feed motor (kW) 0.18 Total power (kW) 12 Power consumption (A) 20 Rod suction connection per head (Ø mm) (1x) 152 Dimensions (mm) 1620x2000x2000 Weight (kg) 1000

Condition: used, Accessories: Bwsdpfx Adsci Hd Sjxsw - Three-jaw chuck Ø 630 mm - Multifix steel holder Center height 400 mm Centre width 2000 mm Camlock mount turning diameter in the crank 900 mm

Condition: used, Year of construction: 2022, Set of carrying chains 2 mower disks with conveyor wings Front mirror with holder / Hydraulic comfort package Set of cone hats Hydraul. Side shift / Standard PTO shaft mounted Warning signs and lighting / Bwedpfotrfqaex Adxew

Condition: new, DESCRIPTION DM100 Z2C - performs edge rounding and removes sharp burrs from both the inner and outer edges of steel, stainless steel or aluminium parts after laser, shear or punch cutting of metal parts from 50 x 50 mm up to 1100 x 100 mm in size. Ekdjtxp The 1st station processes the products through a contact roller (approx. 55° shore) with an abrasive belt and removes strong burrs in the first step. The 2nd station processes the products with 2 counter-rotating cross belts each from below and from above. The cross belts round off the parts to be machined on both the inner and outer edges. A big advantage is also the deburring of products with surface protection foil, because only the edges are processed without damaging the foil. Technical data - DM1100 Z2C: Working capacity (Ø mm) 1100x100 No. of belt stations (Z) 1 No. of cross belt stations 2 Abrasive belt, dimensions (mm) 1100x2200 Abrasive belt speed (m/s) 8-22 Cross belt speed (m/s) 2-8 Feed speed (m/s) 0.6-3.2 Sanding belt motor per head (kW) 18.5 Cross belt motor (kW) (2x) 3 Feed motor (kW) (3x) 0.18 Total power (kW) 33 Power consumption (A) 62 Rod suction connection per head (Ø mm) 150+185 Bodpfx Aded Ixadsxsww Dimensions (mm) 3600x2330x2350 Weight (kg) 5000

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 1140165, Machine from the insolvency of an automotive supplier TECHNICAL DETAILS Bwedpfx Adewqcqtexew Control: Haas Spindle mount: CT 40 Other auctions from the same location: EBU E 35 Search-ID=19074266 Exner H4SP-200 Search-ID=19074391 HAAS DM-2 Search-ID=19074331 HAAS DT-1 Search-ID=19074411 Hans Schoen SH 200 Search-ID=19074426 Mora Primus 7107 V3 Search-ID=19074526 Rapid DGL 250 Search-ID=19074421 Hans Schoen SH 16 Search-ID=19074441 SW Schwäbische Werkzeugmaschinen BA 312 V3 Search-ID=19074456 SW Schwäbische Werkzeugmaschinen BAS 03-11 Search-ID=19074466 EQUIPMENT - Tool changer - Chip conveyor - Swivel axis Further details according to manufacturer - without guarantee Travels X / Y / Z: 711 x 406 x 394 mm Distance spindle to table: 546 mm Spindle speed: 10,000 rpm Table size: 864 x 381 mm T-slot distance: 125 mm T-slot width: 16 mm T-slot depth: 27 mm Number of slots: 3 Table load: max. 113 kg Tool changer: double gripper Tool diameter: 64 mm Tool length: 178 mm Tool weight: 5.4 kg Tool slots: 18+1 Machine dimensions: approx. 2.8 x 2.2 x 2.6 m Transport dimensions: approx. 2.6 x 2.3 x 2.5 Transport weight: approx. 2.5 t

Condition: refurbished (used), SCHRÖDER DM-500 ID.NO. 2117 Schröder DM-500 brine mixer with mixer and pusher that goes up and down. Bwedpfjg R Stisx Adxsw Dimensions 135 x 135 cm H 180 cm. Available 4x in stock.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, working width: 1,100 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, total length: 2,210 mm, total width: 1,530 mm, total height: 1,940 mm, overall weight: 1,200 kg, input voltage: 400 V, workpiece height (max.): 50 mm, power: 6 kW (8.16 HP), input current: 18 A, Edge rounding up to 1100mm width. Ideal for edge rounding of light burrs up to 1100 mm working width. The DM1100 C performs edge rounding and removes sharp edges on both the outer and inner contours of stainless steel, steel or aluminum parts that have been cut in either a laser, shearing or punching machine. This machine processes parts of various dimensions, including products as small as 50x50mm. The DM1100 C has a station with double cross belts for edge rounding and leaves clean, smooth and burr-free edges on the complete parts. DM1100 C Working capacity (mm) 1100x50 No. of cross belt stations 1 Cross belt speed (m/s) 2-8 Feed speed (m/s) 0.6-3.2 Cross conveyor motor (kW) (2x) 3 Feed motor (kW) 0.18 Total power (kW) 6 Power consumption (A) 18 Rod suction connection per head (Ø mm) 150 Bwsdpfxetzfnto Adxjw Dimensions (mm) 2213x1530x1940 Weight (kg) 1200

Condition: new, Year of construction: 2025, TEMP 90 W9 SSR - DM General information: maximum 90 ° C water temperature range -robustes steel sheet housing device on wheels Hydraulic: Immersion pump (make Bacon) with pressure / vacuum function (leak stop operation) -Qmax. 60 l / min Pmax. 3.8 bar Tank and heater made of stainless steel Heating power 9 kW tank capacity 12 liters Fittings made of brass/stainless steel-automatic water filling -electrical level indicator -indirektes cooling system (plate heat exchanger) Cooling capacity ~ 40,000 kcal / h (10 sheets) Display gauge -integrated bypass Solenoid valves for cooling and recovery Electrical and control: -Electronic, self-optimizing PCB control -electronic flow measurement Control voltage in the unit 24 V AC -Akustische and visual alarm indicator -Solid state relays Safety thermostat Sensor break monitoring Monitoring of tube breakage and leakage Bsdpfxod Aatho Adxjww Connection cable with plug -Dimensions: 295 x 575 x h495 mm -Weight: 40 kg

Condition: used, Year of construction: 2023,

Condition: new, Metal Deburring and Edge Rounding Machine (Double Side). DM1100 2C, edge rounds top and bottom sides of metal parts in one single pass. This double sided operation machine deburrs metal sheets rounding its internal and external contours. Featuring 2 sets of double cross belts this machine removes sharp edges on stainless steel, steel and aluminum parts cut by laser, punching or shearing. This metal deburring machine can easily edge round parts with small dimensions, being capable of deburring different shapes and parts sizes from 50mm up to 1100mm. Processes simultaneously both sides of metal sheet parts cut by laser or punching machine, saving time and reducing operation costs. Additional conveyor belt and support table enables single side edge rounding of metal parts down to 50x50mm. Bedpfx Aod Ev Upodxjww DM1100 2C can edge round metal parts with plastic foil, keeping the original finishing and assuring the work purely on the edges. Easy and tool free cross belt replacement. Program for automatic positioning of upper and lower cross belts in order to improve the access, reducing replacement procedure time. High performance on all edges and also on internal holes. Easy to use with an integrated touch screen for monitoring the working settings and the machine alarms. Technical Details: Working capacity (mm) 1100x50 No. Cross belt stations 2 Cross belt speed (m/s) 2-8 Feeding speed (m/m) 0.6-3.2 Cross Belt Motor (kW) (4x) 3 Feeding motor (kW) (3x) 0.18 Total power (kw) 13.1 Consumption (A) 30 Dust extraction connection (Ø mm) 150 Dimensions (mm) 2560x1980x2150 Weight (kg) 2210

Condition: good (used), Year of construction: 2021, Technical data see nameplate. Available: from October-November 2025, the customer will receive a larger system. Bwedpfx Aei Ac Nhedxsw Serial number: 200419 Riedex DM-200/M-B Dust extractor Left-sided design, motorized cleaning, with chip containers.

Condition: new, Metal deburring and edge rounding machine – DM1100 C – performs edge rounding and removes sharp edges on both external and internal contours of stainless steel, steel or aluminium parts either cut in laser, shear or punching machine. This machine works metal parts of different dimensions including products as small as 50x50mm. DM1100 C – Metal Deburring Machine has a station with double cross belts for the metal deburring and edge rounding, leaving clean, soft and burr-free edges on the complete parts. High performance on all edges and also on internal holes. Two cross belts mounted with abrasive blocks run in opposite directions, completing edge rounding on the complete area of the part. DM1100 C can edge round parts with plastic foil, keeping the original finishing and assuring the work purely on the edges. Technical Specifications: Working capacity (mm) 1100x50 No. Cross belt stations 2 Cross belt speed (m/s) 8 Feeding speed (m/m) 0.6-3.2 Cross Belt Motor (kW) 3 Bsdpfx Adsd Evcwexeww Feeding motor (kW) 0.18 Total power (kw) 6.2 Consumption (A) 13 Dust extraction connection per head (Ø mm) 100 Dimensions (mm) 2270x1560x1940 Weight (kg) 1200

Year of construction: 2017, operating hours: 1,800 h, condition: like new (used), functionality: fully functional, power: 9.5 kW (12.92 HP), product height (max.): 24,000 mm, machine/vehicle number: mk 20-2, Woodmizer WMDK. 3 phase conainer series of kiln drier , 9.5 kw kiln drier 8.25 cubic metre load of 50mm boards Bwodpfjxqn Izex Adxow in very good condition and fully functional heat and vent kiln , fitted in a 6 metre insulated container , has external trolley frame . only 1800 hours run time . just plug it in and ready to go

Condition: ready for operation (used), Year of construction: 2008, General Data Measurements width 2930 mm Measurements depth 3210 mm Measurements height 2900 mm Machine weight 9200 kg Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle speed range 28000 rpm Bwsdpfjxn U A Hsx Adxsw Spindle motor power 38/28 kW Tool taper HSK-A63 Number of axis 5 Movement X-Axis Movement 450 Y-Axis Movement 600 Z-Axis Movement 400 Table Outer length 400 mm Outer width 400 mm Number of tslots 5 Distance between 63 mm Media Chip conveyor Yes Internal cooling Yes Additional Equipment Tool Storage Capacity: 30 tools /Max Tool Weight: 6 kg / Max Tool Diameter: 80 mm / Max Tool Length: 250 mm Graphite Dust Collector Heidenhain Touch Probe TS 649 3D Quick Set for 5-Axis Calibration This 5-axis DMG DECKEL MAHO HSC 55 linear vertical machining centre was manufactured in 2008. Consider the opportunity to buy this DMG DECKEL MAHO HSC 55 linear vertical machining centre if you are looking to get high quality milling capabilities. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2007, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMG Deckel Maho Machining Centre Bsdpfx Aextqfnjdxsww 5-Axis Simultaneous Model DMU 50 EVO Linear Year 2007 Complete machine With documentation

Condition: good (used), Year of construction: 2008, Scissor lift table, scissor lift table, scissor lift, scissor lift, single scissor lift table, flat form lift table -Manufacturer: Edmolift, scissor lifting table flat-form lifting table type TUB 600 and agg -Load capacity: 600 kg -Platform: approx. 1450 x 900 mm - Dimensions retracted: height 85 mm -Dimension extended: height 800 mm -Lifting time: approx. 13 seconds. -Quantity: 2x lifting table available Bodpfx Aephup Aedxeww -Price per piece Transport dimensions: 1480/930/H260 mm -Weight: 212 kg with pallet

Condition: used, Year of construction: 2008, functionality: fully functional, DMG MORI SEIKI - DMC 1035 V ecoline Offer Details Stock number: 1039-9218 Type of machine: Vertical Machining Center Manufacturer: DMG MORI SEIKI Model: DMC 1035 V ecoline Year of manufacture: 2008 CNC Control: 810 D Powerline Siemens Location: D-59302 Oelde, Germany Country of origin: - Availability: by arrangement Delivery terms: ex site Additional Information: CNC Vertical Machining Center DMG MORI SEIKI - DMC 1035 V ecoline - Only 3,800 spindle hours WE OFFER YOU: - workshop-tested machines - loaded onto truck free of charge - NO auction fees Bedpfxjxt Ec Ij Adxsww - delivery possible (at extra cost) - unloading and commissioning (at extra cost) Technical Specifications: Travel X-axis: 1,035 mm Travel Y-axis: 560 mm Travel Z-axis: 510 mm Control: 810 D Powerline Siemens Main spindle: - Speed range (main spindle): 20 - 8,000 rpm - Drive power (main spindle): 13 / 9 kW - Max. torque: 83 / 57 Nm - Tool holder: SK 40 Worktable: - Table clamping area: 1,200 x 560 mm - Max. table load: 1,000 kg - Table height above floor: 720 mm - T-slots: 4x H12 / 1x 14 H7 Tool changer: - Number of tool stations: 20 positions - Max. tool diameter: 80 mm - Max. tool diameter with free adjacent pocket: 130 mm - Max. tool length: 300 mm - Max. tool weight: 6.0 kg - Tool change time: 1.6 sec - Chip-to-chip time: 7.0 sec Feeds: - Feed rate: 20,000 mm/min - Rapid traverse: 25 m/min Total connected load: 17 kVA Machine weight approx.: 4.1 t Space requirements approx.: 4.0 x 4.0 x 2.5 m Equipment/Accessories: - Documentation - Signal lamp - 20-position tool changer - Coolant system - Chip conveyor - Electronic handwheel

Condition: like new (used), Year of construction: 2015, operating hours: 1,885 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 850 mm, controller manufacturer: 3D-Control Siemens 840D, workpiece height (max.): 1,300 mm, workpiece diameter (max.): 900 mm, workpiece weight (max.): 1,300 kg, total height: 3,665 mm, total length: 5,534 mm, total width: 3,427 mm, rotary table diameter: 21,500 mm, spindle speed (min.): 18,000 rpm, spindle motor power: 35,000 W, Year of construction: 2015 CNC controller: 3D-Control Siemens 840D Axes X-axis travel mm: 800 Y-axis travel mm: 1050 Bjdpfxsxtbhms Adxsww Z-axis travel mm: 850 C-axis degrees: 360º (0,001) B-axis degrees: -30/180ª Feed rates m/min: 60 Rapid traverse m/min: 60 Acceleration in the axes m/s2: 7 Milling/turning table nc: Number of pallets: 1 Table dimensions mm: Ø800 Maximum workpiece size (D x H) mm: Ø900x1300 Max. workpiece weight kg: 1300 Table rotation speed rpm: 800 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/24 (40%ED/cont) Spindle torque Nm: 111/77 Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: HSK-A 63 Tool magazine slots: 63 Tool changer: Double gripper With free neighboring places mm: 120 With occupied neighboring places mm: 80 Max. Tool Length mm: 650 Max tool weight kg: 15 Chip-to-chip time s: 4.2 Equipment Electronic Handwheel Chip conveyor Internal cooling lubricant supply Rotating inspection windows Tool breakage probe Laser tool measurement for measuring tool length and diameter 4th axis Paper band filter Machine running times Under power: 1885 Spindle Working: 515 Basic machine dimensions / weight Length mm: 5534 Width mm: 3427 Height mm: 3665 Weight kg: 21500

Condition: new, Year of construction: 2025, machine/vehicle number: 25003023, fuel type: diesel, motor manufacturer: Kohler KDI1903M/G15, General information Field of application: Construction Weights Bwodpsxtzd Ujfx Adxow Empty weight: 640 kg Functional Generator capacity: 22 kVA CE mark: yes Other information Fuel consumption: 4.5 Liter per Hour at 90% Load Generator: Kohler KH00501T Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 66 l Transport dimensions (LxWxH): 1,798x0,752x0,172 Production country: FR Additional information Please contact Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information Including : coolant heater and battery charger

Condition: ready for operation (used), Year of construction: 2004, operating hours: 36,700 h, Control Unit Bwodpfxsv Sfv Aj Adxew Brand SIEMENS Model Sinumerik 840D Powerline Main Drive Number of axis 5 Movement X-Axis Movement 1250 mm Y-Axis Movement 880 mm Z-Axis Movement 800 mm Tools Type of tool holder HSK63 Additional Equipment Infrared Scanner Tool Measurement Flushing Gun Internal Coolant Supply (IKZ): 40 bar Tank with Paper Belt Filter: 900 litres This 5-axis DMG GILDEMEISTER DMC 125U universal machining centre was manufactured in 2004. Ideal for complex and precise machining tasks, it offers enhanced flexibility and performance. Consider the opportunity to buy this DMG GILDEMEISTER DMC 125U universal machining centre. Contact us for more information. Application Types Milling

Condition: as good as new (ex-display), Corundum grinding discs 300 mm Ø x 40 mm x 25 mm Ø, 4 pieces quality 31A60M6V511 and 4 pieces quality 10A24Qu4 Bsdpfxouv Ecbo Adxeww Corundum grinding discs 300 mm Ø x 40 mm x 76 mm Ø with recess 125 mm Ø x 20 mm, 2 pieces quality 31A60M6V511 and 2 pieces quality 10A24Qu4V1 Corundum grinding discs 200 mm Ø x 32 mm x 51 mm Ø, 3 pieces quality 31A60M6V511 and 3 pieces quality 10A24Qu4V1

Condition: ready for operation (used), Year of construction: 2005, operating hours: 52,455 h, functionality: fully functional, machine/vehicle number: 2501-0154, turning length: 600 mm, turning diameter over cross slide: 140 mm, turning diameter: 300 mm, spindle motor power: 25,000 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 5,000 rpm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rapid traverse Z-axis: 3 m/min, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, torque: 239 Nm, bar passage: 80 mm, feed rate X-axis: 165 m/min, feed rate Y-axis: 165 m/min, feed rate Z-axis: 220 m/min, overall weight: 10,500 kg, Equipment: documentation/manual, Machine is still in use and can be seen working at VOVU Machining in Uden. In total there are 6 identical machines here. Fanuc 310is controller Bodpfxsur Hfze Adxsww

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details turning diameter 600 mm turning length 2000 mm control Siemens 840 D powerline main spindle speeds: 2500 1/min. total power requirement 72 kVA weight of the machine ca. 12 t Additional information 2-axis CNC universal lathe Equipment: Siemens Sinumerik 840 D powerline CNC control Bwedsxrpgbopfx Adxow Tailstock 12-station turret SMW AUTOBLOK steady rest Power chuck Chip conveyor IFS oil mist extraction system

Condition: used, Year of construction: 2009, operating hours: 46 h, color: blue, power: 185 kW (251.53 HP), total length: 4,010 mm, total width: 1,400 mm, total height: 2,110 mm, Current frequency: 50 Hz Bedpfextmx Rsx Adxoww Voltage: 400