Used Dm Italia for sale (9,192)

Condition: excellent (used), Year of construction: 2023, overall weight: 1,550 kg, 2023 DMG Mori Automation PH 150 Automatic 4 Position Pallet Handling System With 6 Erowa Pallets Pallet Dimension 500 x 500mm. Maximum Pallet Weight 250kg. Maximum Weight Per Level 1,500kg. Axis Travel 'X'=2,170mm, 'Z'=75mm, 'C'=360°. Rated Acceleration 'X'=200mm/s², 'Z'=800mm/s², 'C'=20°/s². Trigger 'X'=3,000mm/s², 'Z'=1,600mm/s², 'C'=150°/s². Maximum Speed 'X'=500mm/s², 'Z'=500mm/s², 'C'=50°/s². Voltage 400V. S/No. 7717000254A. With 6 Erowa Pallets, Signal Tower, Guarding Transport Brackets, Lifting Shackles & Manuals, Overall Dimensions L1,849 x W1,710 x H2,324mm. Weight 1,550kg. Itodjx Aicdepfx Aa Eer

Condition: excellent (used), Year of construction: 2009, Ref:10891 . 2009 ODM ‘Sticker’ Casing-in Machine + ‘Smasher’ Press. For casing-in & pressing a variety of thin to thick books into flexible or hard cases. ODM ‘Sticker’ Features:- • Easy to use control panel. • Very short set-up and strip down times. • Self-adjusting machine requires no make-ready for different case sizes. • Integral twin glue tanks, easily removed for quick cleaning. Itedpfx Aeu Tky Rea Eer • Vacuum cover guide for accurate placement of the spine*. Hand feed of book block Vertical wing action Twin PVA cold glue tanks/application rollers Manual feed of case* ODM ‘Smasher’ Self-adjusting hydraulic pressing & building-in machine. Features:- • Easy to use control panel. • Foot pedal operated pre-set to locate the joint area of the book. • Dual hand button operation for operator safety. • 10 tons of pressure for highly compressed books. • Adjustable dwell timing for pressure duration and heating forming. • Thermostatic control of heated joint forming irons. Specification: Sizes, Max: 280 x 355 mm Min: 100 x 100 mm Book thickness : 1 - 100 mm Mechanical speed, Max: 100 - 400 books/hr. (series production) Max: 100 - 200 books/hr. (one-off production)

Condition: good (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, nominal power (apparent): 61 kVA, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece weight (max.): 4,000 kg, total height: 2,800 mm, total length: 6,000 mm, total width: 6,000 mm, table width: 500 mm, table length: 630 mm, table load: 4,000 kg, overall weight: 12,000 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 19,500 h, number of slots in tool magazine: 120, input voltage: 400 V, Equipment: chip conveyor, rotational speed infinitely variable, DMG DMC 60T RS3 with Heidenhain iTNC 530, no maintenance backlog, in good condition. Ideal machine for unmanned operation, geometrically within new-machine tolerance. The machine can be inspected and measured on site by arrangement. Machine Data: Machine description: Machining centre with pallet storage Manufacturer: DMG MORI Model: DMC 60T RS3 Year of manufacture: 2005 Condition: good Equipment: - Direct linear measurement in X/Y/Z (glass scales) - Chip conveyor - High-pressure coolant system 40 bar (IKZ) - Extraction unit - NC rotary table - Tool magazine, 120 positions - Heidenhain measuring probe - Rotating viewing window - High-pressure coolant 40 bar - Signal lamp - Chip flushing - Operating mode 4 Technical Data: Number of axes: 5-axis Control: Heidenhain iTNC 530 NC rotary table clamping surface: 500 mm x 630 mm Weight: approx. 9,000 kg Chip conveyor: Yes Coolant system: Yes Internal coolant supply: Yes Travels and axes: X-axis: 780 mm Y-axis: 560 mm Z-axis: 560 mm C-axis: 360° Itedpfx Asrxrklea Eor B-axis: -90°/+12° Feed rates and rapid traverse: X-axis: 50 m/min Y-axis: 50 m/min Z-axis: 50 m/min B-axis: - C-axis: 30 m/min Motor spindle: Max. speed: 18,000 rpm Spindle taper: HSK A63 Tool changer: Automatic tool changer: Yes Number of magazine positions: 120 Pallet changer: 5 pallets

Condition: excellent (used), Year of construction: 2010, Machine in excellent condition and very well maintained New dividing table and new spindle X stroke Itsdpfjv A Tkcox Aa Esr 2,600 mm Y stroke 1,100 mm Z stroke 900 mm

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, spindle speed (max.): 2,000 rpm, turning diameter: 800 mm, turning length: 750 mm, controller model: Fanuc Oi-Td, Equipment: chip conveyor, TECHNICAL DETAILS Iodpfx Aex I Augsa Eotr Turning diameter: 800 mm Turning length: 750 mm Spindle power: 30 kW Spindle speed: 2000 rpm Turret stations: 12 positions Chuck size: 21" MACHINE DETAILS Control: Fanuc Oi-Td Machine weight: 9,800 kg EQUIPMENT Chip conveyor

Condition: used, total height: 1,850 mm, total width: 1,200 mm, total length: 1,300 mm, Empty weight: 1.050 kg Price: On request - Documentation available: No - CE certificate present: No - Drive system: Conventional - Horizontal/vertical: Horizontal and vertical - Power [kW]: 3.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 400 - Y-axis travel [mm]: 300 - Z-axis travel [mm]: 400 - Table length [mm]: 750 - Table width [mm]: 300 - Tool holder: SK40 - Main spindle power [kW]: 2.2 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 1600 - Options: Digital readout - └ Type of digital readout: Heidenhain - Transport dimensions: 1300mm x 1200mm x 1850mm (l x w x h) - Transport weight [kg]: 1050kg - Transport packages [pcs.]: 1 Itsdpsx Hiibsfx Aa Ejr Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2012, fuel type: diesel, General information Field of application: Construction Weights Empty weight: 2.172 kg Functional Generator capacity: 60 kVA CE mark: yes Condition Technical condition: good Visual appearance: good Other information Fuel consumption: Diesel Delivery terms: EXW Water tank volume: 390 l Additional information Please contact Christian Theißen for more information Manufacturer: SDMO Model: R66C2 Year of build: 2012 Condition: Used Data: Performance: 60 kVA Engine: John Deere Length: 234 cm Width: 108 cm Height: 190 cm Tank capacity: 39 l / Diesel Required connection: 2x 230 V/16 A, 1x 380 V/16 A, 1x 380 V, 63 Ao. Klemmleiste. Drive type: Diesel Operating noise: 88 dB Own weight: 2.172 kg Weight: betankt 2.500 kg Own weight: 2.172 kg Itedpfx Aaox H Nlio Ejr Special features: Crane, consumption of approximately 14.75 liters per hour. On Weijer trailers Location: 41468 Neuss immediately available

Condition: ready for operation (used), DMG Suppl. 110498 Flat control panel TFT 15" . 2386389 SN:504822207, used, normal signs of use, 100% functional, scope of delivery as per photos Isdpfx Aoi I Iz Asa Ejtr

Condition: excellent (used), Year of construction: 2017, operating hours: 10,240 h, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, controller model: Heidenhain, spindle speed (max.): 15,000 rpm, operating hours of spindle: 10,400 h, We offer in good condition DMG Mori DMF 360-11 4-axis milling machine. X-Axis travel: 3600 mm Y-Axis travel: 1100 mm Z-Axis travel: 900 mm Isdpfx Aoxqa I Hea Ejtr Spindle has been changed 2000 hours ago due to short circuit (no crash) HSK-A63 15.000 RPM spindle 46kW / 61.7 hp - 200 Nm Machine has following options: Swivel head Heidenhain Touch probe TS 642 Automatic door Internal coolant 40 bar with paperbelt filter

Year of construction: 2006, operating hours: 29,689 h, condition: ready for operation (used), General Data Measurements width 1553 mm Ijdpfx Aasx D Igkj Estr Measurements depth 3890 mm Measurements height 1890mm Machine weight 3500 kg Control Unit Brand FANUC Model 180i Main Drive Spindle speed range 5000 rpm Number of axis 2 Movement X-Axis Movement 210mm Z-Axis Movement 450mm Turret Number of turrets 1 Tools Number of index 12 This DMG Gildemeister CTX 320 linear was manufactured in 2006. A reliable horizontal turning machine, it offers robust performance for precision machining. Consider the opportunity to buy this DMG Gildemeister CTX 320 horizontal turning machine. Contact us for more information. Application Types Turning

Condition: good (used), Disc valve, flap valve, ball valve Iodpfeb A Nv Ajx Aa Estr -Drive: without -Connection: DN80 -Material: Stainless steel -Weight: 3.3 kg

Condition: used, external diameter 350 mm internal diameter 127 mm width 20 mm unused grinding wheels for NILES Gear Grinder! different grain size and types available! Itedpfx Aaju Sbd Hj Eor Price per piece

Condition: new, TDM - CH / directly driven grinding spindle type TQ 120.001.01 / TQ 120001, unused, as good as new condition Itjdsxah Tispfx Aa Eor

Condition: ready for operation (used), Year of construction: 2002, Control Unit Brand SIEMENS Model Sinumerik 840D Powerline Main Drive Spindle speed range 12000 Movement Ijdpox D Rhkefx Aa Ejtr X-Axis Movement 1250 mm Y-Axis Movement 880 mm Z-Axis Movement 800 mm Additional Equipment Infrared scanner Tool measurement Flushing gun IKZ (internal coolant supply 40 bar) 900 litre tank with paper belt filter This 5-axis DMG DECKEL MAHO DMC 125U was manufactured in 2002. A universal machining centre, it offers advanced capabilities for diverse and complex machining tasks. Consider the opportunity to buy this DMG DECKEL MAHO DMC 125U universal machining centre. Contact us for more information. Application Types Milling

Condition: good (used), Disc valve, flap valve, ball valve -Drive: without -Connection: DN50 -Material: Stainless steel Iodsb A Iw Dspfx Aa Ejtr -Number: 2 valves available Price: per piece -Weight: 2.2 kg

Year of construction: 2002, condition: used,

Condition: ready for operation (used), Weidmüller ICD06 control panel with 3.5" floppy disk drive, used, good condition, 100% functional Itjdpfx Aaexaig Dj Eer

Condition: ready for operation (used), Year of construction: 2004, operating hours: 36,700 h, Control Unit Brand SIEMENS Model Sinumerik 840D Powerline Main Drive Number of axis 5 Movement X-Axis Movement 1250 mm Y-Axis Movement 880 mm Z-Axis Movement 800 mm Tools Type of tool holder HSK63 Additional Equipment Itodpfx Asx D Npgsa Eor Infrared Scanner Tool Measurement Flushing Gun Internal Coolant Supply (IKZ): 40 bar Tank with Paper Belt Filter: 900 litres This 5-axis DMG GILDEMEISTER DMC 125U universal machining centre was manufactured in 2004. Ideal for complex and precise machining tasks, it offers enhanced flexibility and performance. Consider the opportunity to buy this DMG GILDEMEISTER DMC 125U universal machining centre. Contact us for more information. Application Types Milling

Condition: good (used), Disc valve, flap valve, ball valve -Drive: without -Connection: DN50 -Material: Stainless steel Itjdeb A Nxaspfx Aa Ejr -Weight: 2.2 kg

Condition: excellent (used), Terminal block, terminal block, feed-through terminal block -approx. 1240 pieces: various clamps -1x: 1770370000 ZDU 4-2/2AN -1x: 1651980000 ZIA 1.5/3L-1S -3/4 Package: 1632080000 ZPE4 -5x: 1632050000 ZDU4 -2x: 1775480000 ZDU1.5 -1x: 1867180000 ZP2.5/1AN/11GN/BE -5x: 1652030000 ZIA1.5/4L-PE Ijdpfxsb A R Hko Aa Ejtr -5x: 1/2x 1867190000 ZP25/1AN/12GN/BE -5x: 1652030000 ZIA1.5/4L-PE -4x: 1815590000 ZP2,5/1AN/13 Price: complete -Weight: 16.5 kg

Condition: good (used), Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve -without: drive -Connection: DN65 -Nominal pressure: PN16 -Width: 100 mm -Material: stainless steel -Weight: 3.3 kg Iedpfjb A Sncjx Aa Ejtr

Condition: good (used), Terminal boxes, aluminum housings, housing systems, Klippon -Type: Klippon K4 -Dimensions: 125/80/H75 mm Price: per piece -Quantity: 6x Available -Weight: 0.6 kg Itedpfsb A Sn Ujx Aa Eer

Condition: good (used), Terminal boxes, aluminum housings, housing systems, Klippon -Type: Klippon K5 -Dimensions: 130/170/H90 mm Price: per piece Iodob A Sn Tepfx Aa Eotr -Quantity: 4x Available -Weight: 1.4 kg

Condition: good (used), Terminal boxes, aluminum housings, housing systems, Klippon -Type: Klippon K6 -Dimensions: 160/200/H100 mm Price: per piece -Quantity: 4x Available -Weight: 4 kg Itjdpfx Aaeb A Sn Sj Eor

Condition: good (used), Plug, socket insert, connector -Type: DSTV-BL 24 Iedpsb A Hfasfx Aa Ejtr Price: per piece -Quantity: 4x Available -Weight: 0.5 kg