Used Disposable Blades for sale (6,005)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1100xx750x1380 mm Weight 450 kg Bjdpovz Htnefx Aa Ioln Total power requirement 0,5 kw

Condition: excellent (used), functionality: fully functional, Multi-Blade Saw Brodpol WP 100 Maximum saw blade diameter: 350 mm Largest distance between outer blades: 320 mm Minimum cutting thickness: 15 mm Maximum cutting thickness: 100 mm Blodpfx Aoy Icwhea Ijn Maximum cant width: 500 mm Minimum cant length: 550 mm Feed speed adjustable via inverter: 26 m/min Main motor power: 30 kW

Condition: new, Year of construction: 2026, CORMAK TSC630 Planer Knife Sharpener is a precise and efficient machine designed for sharpening planer knives, chipper knives, shredder knives, and other machine blades used in woodworking, sawmills, and industrial production facilities. Thanks to its ability to sharpen knives up to 630 mm in length, this model is an excellent solution wherever accuracy, repeatability, and fast tool restoration are essential. Dull knives result in poorer machining quality, increased machine load, and unnecessary downtime. The CORMAK TSC630 quickly restores the perfect sharpness of machine knives, ensuring high-quality grinding results and full control over the sharpening process. Main advantages of the machine Sharpening knives up to 630 mm – suitable for most standard planer knives and machine blades within this length range. Liquid cooling system – effectively removes heat generated during grinding, protecting the cutting edge from overheating. Adjustable sharpening angle 0–90° – allows precise adjustment according to the knife type and required cutting geometry. Smooth manual feed system – linear bearing guides ensure stable and precise movement of the grinding assembly. Adjustable clamps and stops – enable quick and repeatable positioning of the knife. Ability to sharpen several thin knives at once – stacking blocks allow simultaneous sharpening of planer knives with a thickness of 3 mm. Smooth grinding wheel height adjustment – allows accurate positioning of the grinding wheel relative to the sharpened knife. Collection tank with drain opening – enables collection and reuse of the coolant. Construction and technology The CORMAK TSC630 sharpener has been designed for users who require a stable, accurate, and convenient machine for daily knife sharpening operations. The grinding assembly moves along precision linear guides equipped with linear bearings, ensuring smooth movement of the grinding wheel across the entire length of the blade. This solution provides a uniform grinding process without the risk of uneven sharpening and allows full control over the sharpening operation, even when working with longer knives. Perfectly sharp knives without overheating the cutting edge Temperature control is one of the most important factors during sharpening. The integrated liquid cooling system effectively removes heat generated during grinding, protecting the material from overheating and loss of cutting properties. Thanks to the cooling system, sharpened knives maintain the correct geometry, retain sharpness for longer, and ensure high-quality performance after being installed back into the machine. Standard equipment CORMAK TSC630 knife sharpener Corundum grinding wheel Built-in cooling system Coolant collection tank with drain opening Blocks for simultaneous sharpening of several thin knives Adjustable clamps and stops Bodpfxoy Sf Uko Aa Ieln Mounting elements User manual Technical specifications Parameter Value Motor power 1.1 kW Power supply 230 V Maximum knife length up to 630 mm Maximum knife width up to 150 mm Maximum knife thickness up to 30 mm Grinding wheel speed 2800 rpm Grinding wheel diameter / height 100 / 51 mm Grinding wheel thickness 13 mm Sharpening angle 0–90° Cooling system Yes Feed type Manual, with linear bearings Machine dimensions 1000 × 465 × 610 mm Weight 55 kg

Condition: excellent (used), Ogam PO 280 multi-blade saw, Track width 300mm, Bljdpezib Rajfx Aa Ien Maximum cutting height 110mm, Maximum saw blade diameter 350mm, Manual adjustment of the saw arbor up and down, Manual adjustment of the pressure pads, Engine power approximately 18kW, Infinitely adjustable feed rate, Automatic track lubrication, Machine in good working order, very good condition.

Year of construction: 2005, operating hours: 2,120 h, condition: good (used), functionality: fully functional, blade length: 650mm with opposed shear cutting, 3 rotating blades, 2 counter-blades, 55kW motor, grinding extraction system with flexible screw conveyor (not included), front opening, control panel, soundproofing, spare set of new blades. Blodpfszbqyvex Aa Ijn

Condition: good (used), functionality: fully functional, For sale: 1 used facing machine for HSS blades Manufacturer: Loroch Type: AK Blade diameter min/max: 80/710 mm Pitch: 3-25 mm Blsdpfxjy Nx Apj Aa Ien Grinding wheel diameter: 200 mm Drive motor: 0.55 kW Working speed: 10-45 rpm Coolant Weight: approx. 750 kg Can be inspected in our warehouse upon request.

Year of construction: 2025, condition: as good as new (ex-display), Thanks to the AULUMA EXACT, all common double-knife and standard knife blades as well as hedge trimmers can be resharpened quickly and efficiently in highest quality. Width 3m (maximum blade length in one clamping 2.4m). Versatile Adjustment and Infinitely Variable Grinding Angle This enables grinding of all common types of knives. The knife is fixed clamped and does not need to be adjusted again. The grinding angles of 2 knives may be preselected and changed by means of a quick change switch. The angles can be easily read off via scales. The grinding depth can also be adjusted infinitely. Bjdpfogvvxrox Aa Ijln Precise Guidance of the Grinding Machine Thanks to the predefined motion sequences, a constant, uniform grinding can be achieved very quickly. The blades maintain their straight shape – whereas freehand sharpening will damage the knives over time as they lose their shape. Zero-backlash Movements Due to Special Rollers with Ball Bearings Due to the special and robust design, there is almost no wear. The rollers and guides are galvanized and fit together perfectly – allowing for easy and zero-backlash movements. Incl. High-quality Angle Grinder From BOSCH and Special Grinding Wheel The variable speed angle grinder can be easily disassembled and thus used for other purposes. The special ceramic grinding wheel helps to avoid burning of the blades.

Condition: excellent (used), - maximum length of sharpened knives 600mm - largest working travel of tool slide 660mm - the largest traverse of the cross slide 160mm - largest horizontal travel of the grinding head 140mm Bsdpfotn Rn Nox Aa Ioln - rotation of the grinding head in the horizontal plane 360 degreesni - rotation of the grinding head in the vertical plane ± 30degrees - the largest vertical travel of the grinding head 240mm - has liquid cooling

Condition: new, The DP-700Industrie is the industrial version of our multi-blade circular saw in an extra robust design. It is specially developed for the industrial longitudinal division of materials. It was designed to efficiently process large quantities of material. The independent positioning of two saw blades and the ability to install multiple fixed discs make this machine ideal for processing hardwood at different heights. This means it is designed for long-term use in the production of lumber, pallets or other wood cut goods. The machine is equipped with an upper and lower extraction device to ensure maximum extraction performance, which solves a common problem with multi-blade circular saws. 9 pieces of 140mm thick feed rollers - 6 pieces at the feed, 3 pieces behind the saw blades - pull in every workpiece quickly and easily. Bljdpfx Asvrvgxoa Ijn The scope of delivery includes 10 saw blade holders, which can be moved anywhere on the shaft. Technical data: Motor power: 30 kW Feed motor power: 1.1 kW Shaft diameter: 70mm Saw blade diameter: 450 mm Maximum cutting height: 150 mm Minimum material length: 800 mm Saw blade speed: 3500 rpm Feed speed: 6 - 35 m/min (infinitely adjustable) Material width: max 650 mm Width of feed rollers: 600 mm Measurement: with scale Saw blade holders included: 10 pieces Weight: approx. 3,000 kg Optional: More powerful motor (up to 50 kW) Interchangeable saw bushings Longer rolling table (4 meters long) Additional saw blade holders

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1624, tooth pitch: 1 mm, We offer this new ILPRO Technology I80GF-C saw-blade sharpening and I70 GF setting machine, year of manufacture 2025. Model: I80GF-C sharpening machine for bandsaw blades Serial number: 1624 Year of manufacture: 2025 TECHNICAL DATA: BANDSAW BLADE Width 8-80 mm Thickness 0,4-1,2 mm Tooth pitch 1-28 mm Clearance angle 0°-12-20° Teeth/minute 10-100 Model: I70GF setting machine for bandsaw blades Serial number: 1625 Bjdpfxjzudfws Aa Ioln Year of manufacture: 2025 TECHNICAL DATA: BANDSAW BLADE Width 8-80 mm Thickness 0,4-1,2 mm Tooth pitch 3-28 mm Clearence angle 0°-12-20° Teeth per minute 120-200 If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2020, condition: new, Field of application: Construction Attachment suited for: Loaders Selling price: € 100, US$ 105,9 Galen Group is very experienced in delivering custom solutions to the underground mining industry. No matter the need, Galen’s experienced design, engineering and manufacturing teams deliver the solution that is right for you. Bljdpfx Ajn Tm A Toa Ien More heavily guarded underground mining buckets designed for corrosive mining materials. For the entire underground loader line, Galen Ground Engaging Tools system now offers bolt on half arrow ground engaging tools (GET) for bucket edges. The system is designed for high abrasion applications where weld-on GET experience high wear rates. With the retention system, the bolt-on GET offer more wear material than standard weld-on GET, and the bolt-on design enables quick removal and replacement. Despite additional wear material, the low-profile front edge eases pile penetration and promotes fast bucket loading.

Condition: used, Year of construction: 1985, RIVO Risstaler R200 GA Saw Blade Sharpening Machine, year of manufacture 1985 Grinding wheel diameter: 200 mm Grinding wheel bore diameter: 25 mm Maximum tooth pitch: 50 mm Maximum tooth height: 25 mm Grinding angle: 0-30 degrees Bjdpfx Aaszl N Irj Isln Maximum blade height: 190 mm Minimum blade length: 900 mm Motor power: 0.65 kW Feed motor: 0.12 kW Supply voltage: 400 V Overall dimensions: 251 x 90 x 163 cm Weight: 530 kg Immediately available - fully functional Location: Austria, near St. Pölten

Condition: excellent (used), Year of construction: 2013, Multi-blade saw for reclaiming cross-cut boards Bledpox Svxtefx Aa Isn

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1800x930x1500 mm Bsdpsv A Hgqefx Aa Ioln Weight 700 kg Total power requirement 1,65 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1100x1500x2100 mm Bledev A Hgwspfx Aa Ion Weight 800 kg Total power requirement 3 kw

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, Full trimmer saw - 21 sawblades, trimmer speed 110-130 pcs/min, dismantled, stored, was in use in green sorting line Bedpfx Aow S Eylea Ieln

Condition: excellent (used), Year of construction: 2006, track width: 300 mm cutting height: 120 mm max. disc diameter: 350 mm Bodpfxjwxrrvj Aa Isln motor power: 30 kW table width: 750 mm feed adjustable via frequency inverter fence adjustable pneumatically

Year of construction: 2022, condition: used, Terra-Star Powerline TSP.184, cutting width 1800mm, the machine's four shafts ensure extremely high throughput! Equipped with M80X mixing shafts, armored in the wear zones – resulting in a particle size of 0-60/80 mm. Suitable for mixing in lime and binders, breaking up clumped materials, and separating stones, branches, roots, etc. Fitted with a fully hydraulic OQL310 wheel loader mount (not included in the price). The loader mounting can be changed at any time, and an excavator adapter can be combined if required. Price without adapter For excavators from 32 t For wheel loaders from 17 t Bodpfx Aajyf Arfj Ieln Weight (kg): 3100 Throughput: 78–120 m³/hr Leak oil connection required: 1 Series: TSP.184.021

Year of construction: 2025, condition: used, Terra-Star Powerline TSP.154, cutting width 1500mm. With its 4 shafts, the machine offers an enormous throughput! Bjdpsyf Arlefx Aa Ieln Mixing in lime or binding agents to dry the soil, blending with compost, sand, or other soils, etc., while simultaneously breaking up soil clumps. Aerating, shredding, tearing apart, and turning over biomass, organic waste, and compost, while simultaneously separating out branches, roots, etc., that cannot be shredded. Crushing brittle construction materials such as pumice, bricks, and Poroton blocks, while at the same time separating out fragments (mm); larger, harder pieces remain in the separator. Feeding clumped soil into a screening plant reduces waste and increases throughput. Price without adapter! For excavators from 24 t For wheel loaders from 13 t Weight (kg): 2300 Throughput: 64 - 95 m³/h Leak oil connection required: 1 Series: TSP.154.124

Year of construction: 2021, condition: used, The separator was used in the production of flowable fill (liquid soil). Primarily, peat was shredded, which is why cross-discs are installed to ensure effective material size reduction. The PE lining ensures improved material flow. Bsdpfxjyf Ar Ej Aa Ioln The shafts are suitable for shredding biomass and compost, as well as other soft materials such as bark, etc. The separator is equipped with an adapter compatible with wheel loader systems from Volvo, Cat, and Liebherr, as well as an overflow protection system that prevents debris from spilling over. We can also equip the separator with different shafts, such as screening shafts or mixing shafts. Please refer to the attached description. Suitable for excavators from 16 t Suitable for wheel loaders from 12 t Weight (kg): 1600 Drain line required: 2 Series: TSC.184.007

Year of construction: 2025, condition: used, Separator Terra-Star TSC.134 used, year of manufacture 2025 Maintenance-free, screening line 0–30/35 mm, star discs TA 15 mm Star discs are armored Application with screening shafts: Separation of stones, branches, roots, turf, debris, etc. from still usable waste soil. Works even with moist soil. Mixing in compost, sand, substrate, etc. in a single screening operation is easily possible. Screening of topsoil, construction debris, gravel. Backfilling of construction sites and pipe trenches, etc. Shafts for different grain sizes or tasks can also be installed—please ask us about this. Equipped with Likufix SW33 Bjdjyf Atijpfx Aa Ijln Price is without adapter plate Upon return from rental, the machine is inspected and comes with a 12-month warranty. For excavators from 12 t For wheel loaders from 8 t Weight in kg: 1200 Throughput: 50 m³/h Drain oil connection required: 2 Series: TSC.134.013

Condition: used, Year of construction: 2023, For sale is a professional, two-spindle multi-blade saw, model WP 165, designed for efficient longitudinal cutting of wood. This machine is ideal for sawmills and facilities producing packaging components, pallets, structural timber, boards, and garden elements. Thanks to the use of two parallel spindles with a set of circular saw blades, the machine provides high performance, precise cutting, and uniform blade wear. The adjustable spindle carriage allows for adjusting the spindle position, which ensures optimal tool load during operation. Material transport is carried out using four pairs of driven rollers, which ensure secure guidance of the timber. The clamping force is pneumatically adjustable, allowing for stable cutting of both dry, wet, and frozen wood. The machine's design guarantees straight cuts even when processing long materials. Depending on the type of wood, its moisture content, and the number of cuts, the output is approximately 10–18 m³ of wood per hour. TECHNICAL SPECIFICATIONS: - Model: WP 165 - Type: Two-spindle multi-blade saw - Maximum blade diameter: 300 mm - Maximum distance between outermost blades: 320 mm - Minimum cutting thickness: 30 mm - Maximum cutting height: 165 mm - Maximum timber width: 500 mm - Minimum material length: 700 mm - Spindle speed: 3350 rpm - Feed rate: 30 m/min - Main motor: 90 kW - Second spindle motor: 75 kW - Feed drive motor: 2.2 kW - Power supply: 3 × 400 V - Pneumatic system pressure: approx. 0.4 MPa (4 bar) - Sawdust extraction: lower – by conveyor or pneumatically, Blodpfxszkg Iyo Aa Isn upper – pneumatically. - Year of manufacture: 2023 Machine dimensions: - Width: 1950 mm - Height: 1640 mm - Length (without tables): 1960 mm - Equipment: two-spindle blade set, driven material feed, pneumatic material clamping, infeed table included. This machine is a robust construction designed for intensive operation in a sawmill. The high drive power (90 kW + 75 kW) allows for efficient cutting of thick timbers with high throughput. Please contact us by phone. Machine viewing is possible by prior arrangement. - Where can you see our machines? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE Lublin Voivodeship It is possible to test the machine on-site. Financing options are available through leasing or installments. WE ORGANIZE TRANSPORT We also offer a wide selection of woodworking machines, including: panel saws, band saws, and circular saws, planers, jointers, milling machines, grinders, edge banding machines, four-sided planers, drills, presses, lathes, dust extractors, and many other devices from reputable manufacturers. Our range includes machines from brands such as: ALTENDORF, SCM, MARTIN, FELDER, HOLZ-HER, ROBLAND, WEINIG, CASADEI, BRANDT, MAGGI, SAC, STETON, HOUFEK, IMA, OTT, BÜTFERING, HEBROCK, BERNARDO, HOLZMANN, and many others.

Condition: ready for operation (used), Year of construction: 2001, machine/vehicle number: 31 504, functionality: fully functional, cutting height (max.): 2,200 mm, cutting width (max.): 5,300 mm, saw blade diameter: 300 mm, overall weight: 700 kg, plate height: 80 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum vertical cutting height: 2,200 mm Maximum horizontal cutting height: 2,100 mm Maximum cutting width: 5,300 mm Maximum cutting depth: 80 mm Saw blade diameter: 300 mm Saw blade bore: 30 mm MACHINE DETAILS Voltage: 400 V Current draw: 10 A Fuse rating: 16 A Power: 4.4 kW Shipping packages: 1 unit Dimensions & Weight Dimensions (L x W x H): 6,660 x 2,070 x 3,010 mm Weight: 700 kg FEATURES Blsdpoz Ea Imofx Aa Isn CE marking Horizontal cutting Vertical cutting

Condition: new, Year of construction: 2026, The PIRANHA 310 Multi-blade or Multi-blade Circular Saw with single shaft is a technological machine, indispensable in a modern sawmill to optimize the production of sawn timber. Blodpfx Aaohpbu Rs Isn ideal for the production of strips, squares, sawn timber, profiles, edged planks, prisms, boards, elements for pallets. SPECIAL PRICE, OFFER OF THE MONTH UNBEATABLE PRICE

Condition: new, Year of construction: 2015, Storage location number: 100533522 Bjdpozkzgwsfx Aa Ieln Transport dimensions (L x W x H): 0 x 0 x 0 Cutting width: 2000mm Carrier unit: L506 Capacity: 0.7 m³ Weight: 560 kg Location: Meckenheim