Used Disposable Blades for sale (6,006)

Year of construction: 2008, condition: used, controller model: Windows XP SP3, power: 9 kW (12.24 HP), working width: 2,500 mm, TECHNICAL DETAILS Maximum working width: 2,500 mm Minimum working width: 510 mm Number of saw blades: 6 + 1 MACHINE DETAILS Control system: Windows XP SP3 Machine programming software: Packsize control console 3.9.3 Total connected power: 9 kW Bodpfez Ekd Esx Aa Ioln EQUIPMENT Saw carriage CE conformity The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8534

Condition: good (used), Robot Coupe R45 Vertical Cutter Mixer Stainless, 45L bowl capacity, three blade assembly, safety lid, variable speed, with timer, 3Ph Bedpez D Hwlofx Aa Ijln

Condition: good (used), Robot Coupe R30 Vertical Cutter Mixer Bsdoz D Hw Sopfx Aa Ioln Stainless, 30L bowl capacity, three blade assembly, safety lid, variable speed, with timer, 3Ph

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1995, actuation type: hydraulic, cutting angle (min.): 0.5 °, cutting angle (max.): 2 °, sheet thickness (max.): 13 mm, back gauge: 1,000 mm, power: 18.5 kW (25.15 HP), overall weight: 17,000 kg, Equipment: CE marking, documentation/manual, finger protection, foot remote control, type plate available, Hydraulic shear LVD HST-C 40/13 Year of manufacture: 1995 Serial number: 22764 Technical specifications: Max. sheet thickness: 13 mm Cutting length: 4050 mm Back gauge range: 1000 mm Cutting angle: 0.5° - 2° Blade clearance: 0.1 - 2.2 mm Number of strokes per minute: 7 - 28 Number of holding points: 21 Motor: 18.5 kW Weight: 17000 kg Oil capacity: 300 l Voltage: 3 x 380 V Included options: Safety standards: CE 1 square arm support, length 1500 mm Bjdpfx Aez D Dnboa Isln 2 additional supports, length 1500 mm

Condition: used, boneless meat, sausage, cheese, or fish 400V, 50 Hz/3/N/PE 32A approx. 10 kW compressed air connection values: min. pressure 4 bar cutting system sickle blade: max. speed at blade head WSK 2,000 min-1 Drive: feed, cup, portioning unit CCU: servo motors Drive power transmission: toothed belts Feed power transmission: precision ball screw drive Cutting thickness: 0.1 to 100 mm (depending on product and cutting capacity) product passage width: adjustable up to max. 380 mm product passage height: adjustable from 125 to max. 180 mm (optionally up to 200 mm) programming: dialogue via touch screen program memory locations: 100 2 sickle blades total dimensions (L x W x H): ± 3,000 x 1,600 x 2,700 mm + "Wibotec" single-pan weighing scale Type Continuous checkweigher 200 - Web 99T 355 -365 Web Module Length: approx. 485 mm Width: approx. 535 mm Weight: approx. 150 kg Power transmission of the drives: gears Blsdpfx Aoz D Aqbsa Ijn 9 g - 3750 g + Monosorting rocker Type CCR Length: approx. 450 mm Width: approx. 380 mm Weight: 250 kg Drive power transmission: toothed belts Motor type: asynchronous motors or servo drives, depending on the slicer type + Conveyor belt Type CCE total dimensions (L x W x H): ± 4,100 x 960 x 1,500 mm drive power transmission: toothed belts motor type: asynchronous motors or servo drives

Condition: used, Year of construction: 1998, machine/vehicle number: 0102-260022, The Behringer HBP 430N is a horizontal double-column band saw designed for professional use in metalworking. It is suitable for the precise cutting of solid material, tubes, and profiles, and stands out for its robust construction and high cutting accuracy. The machine is designed for straight cuts; depending on the configuration, miter cuts up to 45° are also possible. With a cutting range of Ø 430 mm or 600 × 430 mm and a continuously adjustable cutting speed from 17 to 110 m/min, it is highly versatile. The powerful 7.5-kW saw motor, the hydraulic workpiece clamping system, and the 150-liter cooling lubricant system ensure reliable and economical operation. Weighing 2,100 kg, the HBP 430N offers high stability and is ideally suited for daily use in metal fabrication, steel construction, and mechanical engineering facilities. Bedpszq S Ncofx Aa Isln Technical Specifications HBP 430 N Working range at 90° (round): Ø 430 mm Working range at 90° (flat): 600 × 430 mm Working range at 45° (flat): 320 × 430 mm Minimum material dimensions: 15 mm / 10 × 15 mm Minimum cut length: 10 mm Remnant length: approx. 40 mm Cutting speed: 17–110 m/min Coolant tank: 150 l Belt tension: 80 bar Saw motor: 7.5 kW Hydraulic motor: 2.2 kW Coolant pump: 0.12 kW Chip conveyor 0.09 kW Rated power approx. 11 kW Mains connection 400 V / 50 Hz Control voltage 24 V DC Current consumption approx. 22 A Fuse rating 35 A Cable cross-section: min. 4 × 6 mm² Band saw blade dimensions: 5,800 × 54 × 1.3 mm Machine weight: 2,100 kg Workpiece support height: 700 mm

Condition: used, Used Pfaudler BE5000 vertical glass lined reactor. Approximately 5,000 litre capacity. Internal rated 6.6 bar/full vacuum design pressure at -29 to 200 deg.c. External mild steel jacket rated 6.6 bar/full vacuum design pressure at -29 to 200 deg. Unit has welded dished top and bottom heads. Includes top entry 4-blade CBR Turbine type agitator driven by a 10.5 kw 415 volt 292-1460 rpm 3/50 motor. Unit is mounted on lugs. Specifications: Capacity: 5,000 L Internal Pressure: 6.6 bar Internal Temperature: 200°C Jacket Pressure: 6.6 bar Bljdpfx Aeykn Rdoa Ijn Jacket Temperature: 200°C Legs/Lugs: Lugs

Condition: good (used), Year of construction: 2002, Double miter saw, manufactured by elumatec, type: DG79/32, year of manufacture: 2002. Digital display for length. 6-meter machine. Oil-mist lubrication system. Machine documentation available. In good condition. Blsdpez Hmx Isfx Aa Ion Saw blade: 380 mm x 3.6 mm / 3.0 mm x 32 mm. Further details can be found in the data sheets.

Condition: used, Year of construction: 2011, total height: 2,850 mm, total length: 3,600 mm, total width: 1,500 mm, Colour: Grey Weight: 1.800 kg Resaw Centauro R1000 + RTF Machine number 19602 Year of construction 2011 Wheel diameter 1000mm Max cutting height 520mm Max cutting width 970mm Max saw blade width 110/80x1mm Max min saw blade length 6570/6380 Bedpfsz H T U Aox Aa Ijln Table size 1500x920mm Speed 570 Rpm 22kW (30hp) Required extraction capacity 2500 m³/h Working pressure 6-8 bar Dimensions 2255x2200x3000mm (LxWxH), weight 2300kg - Year: 2011 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 19602 - Saw direction: vertical - Main motor power [kW]: 22.0 - Wheel diameter [mm]: 1000 - Max. cutting to feed roller opening [mm]: 300 - Max. cutting to stop opening [mm]: 370 - Max. cutting height [mm]: 4750 - Table width [mm]: 900 - Table length [mm]: 1380 - Feed roller type: Automatic electric - Extraction port diameter [mm]: 220 - Options: Tiltable fence - Voltage [V]: 400 - Fuse [A]: 63 - Power [kW]: 25.0 - Transport dimensions: 3600mm x 1500mm x 2850mm (l x w x h) - Transport weight [kg]: 1800kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2008, Striebig Panel Saw Compact 5220, Year of Manufacture: 12/2008 Solid, self-supporting, firmly welded saw frame with high torsional rigidity Stable, durable saw beam steel construction Robust mounting of the motor carriage ensures high cutting accuracy Powerful, low-vibration 3.0 kW motor (S1) TRK dust extraction system Automatically adjusting aluminum slat grid with plastic supports Device for wall mounting Ball-bearing support rollers Split center support at optimal working height, with aluminum grid Integrated small parts support made of wood Supersilent sound insulation to reduce saw blade noise Electromagnetic motor brake Saw weight approx. 910 kg Cutting depth 60 mm Saw motor power 3.9 kW (5.3 HP) Saw blade diameter 250 mm Saw blade bore 30 mm *1 Emission sound pressure level at the workplace LpA 82 dB *2 Saw blade speed 5250 rpm 2 dust extraction ports ø 100 mm Connection value 4.8 kW Bljdpfx Aozp Nt Aea Ijn Mains connection 3 x 400 V / 50 Hz Cutting range: L: 4600; H vertical: 2200 mm, H horizontal: 2100 mm Equipment: - Compact 5220 - Freestanding support, complete Location: Available from warehouse 54634 Bitburg - immediately available -

Year of construction: 1997, condition: reconditioned (used), functionality: fully functional, Automatic stop system for precise profile cuts with a length of 4200 mm Motor-driven stop with electronic length measurement Robust steel construction with PVC-coated rollers Control via console with automatic repositioning The Microbo stop system enables precise and automated profile length measurement during sawing/punching/etc. The electrically operated slide moves on a ball bearing guide and is positioned via a numerically controlled system; the measurement is performed precisely from the center of the saw blade. PVC-coated rollers protect the profile surface and facilitate smooth sliding. All functions can be conveniently operated via the control console. Blodpfxez H I D Sj Aa Ijn

Condition: new, Year of construction: 2026, functionality: fully functional, rotor diameter: 400 mm, number of blades: 35, rotor width: 800 mm, power: 37 kW (50.31 HP), rotational speed (max.): 80 rpm, sieve perforation: 40 mm, warranty duration: 12 months, Genox V800 Series - Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. 37kW drive motor (30kW & 45kW optional) with heavy duty oversized gearbox, 80rpm shaft speed as standard. Bedpfx Ajz Hyylja Ieln 800mm wide x 400mm diameter Rotor with 35 pcs x 40mm concave, reversible, high quality heat treated alloy steel blades. Hydraulic force feeding of material according to motor loading and timers. Parameters can be easily configured on site to suit the materials being processed. Output size is controlled by replaceable screens mounted beneath the rotor shaft. Standard size is 40mm, other sizes available on request. This machine is in stock at our warehouses in the UK and Germany and is available for immediate delivery.

Condition: excellent (used), Year of construction: 2016, Cutting Capacity 0° round (tube): 300 mm Cutting Capacity 0° round (solid material): 180 mm Cutting Capacity 0° rectangular horizontal (hollow section): 320 x 290 mm Cutting Capacity 0° bundle (tube): 320 x 160 mm Cutting Capacity -45° round (tube): 300 mm Cutting Capacity -45° round (solid material): 110 mm Cutting Capacity -45° rectangular horizontal (hollow section): 300 x 280 mm Cutting Capacity -60° round (tube): 200 mm Cutting Capacity -60° round (solid material): 80 mm Cutting Capacity -60° rectangular horizontal (hollow section): 190 x 200 mm Cutting Capacity +45° round (tube): 270 mm Cutting Capacity +45° round (solid material): 110 mm Cutting Capacity +45° rectangular horizontal (hollow section): 270 x 200 mm Table height, material feed: 800 mm Main motor: 2.6 kW Cutting speed, stepless: 20 - 100 m/min Saw blade size: 3660 x 27 x 0.9 mm Machine dimensions (L x W x H): approx. 1800 x 950 x 1400 mm Net weight: 585 kg Accessories / Special features: • Semi-automatic swing-frame metal band saw • After the cutting cycle is started, the vice clamps automatically – after completion, it returns to its starting position • For mitre cuts from +60° to -45° with frequency inverter • Suitable for cutting stainless steel, tool steel, hollow profiles, and solid materials • Fully hydraulically controlled sawing functions • Saw drive with low-maintenance, oil-lubricated worm gear • Robust three-phase motor • Motor equipped with overload protection Bsdpfoxz Dqmex Aa Ieln • Ball-bearing turntable • Saw arm inclined at 25°, resulting in longer saw blade service life • Saw arm swivels from +60° to -45° • Chip removal brush for optimal saw blade cleaning and maintenance • Frequency inverter: allows stepless adjustment of saw blade speed from 20 - 100 m/min • BRP – Saw band monitoring • Hydraulic vice with manual quick-release for lateral adjustment • Limit switches control upper and lower saw arm positions • No need to set the upper end point • Length stop with scale, left-side removal 3 m • Cut detector • Swivelling control panel • Micro-spray device • 2 x roller conveyors: 3 m discharge left, 6 m feed right • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 1995, Max. cutting length 3050 mm Material thickness 37 kg/mm² 12 mm Material thickness 70 kg/mm² 8 mm Cutting angle 1.8 degrees Stroke rate 8 - 13 min. Number of hold-down clamps 12 Drive power 18.5 kW Dimensions L x W x H 4150 x 1950 x 1950 mm Weight 8000 kg Accessories / Special features: • ELGO Type 71 motorized NC positioning control for the backgauge, length approx. 900 mm • If necessary, the toggle lever system allows the machine to operate with only one cylinder at a reduced cutting capacity of approximately 55% of the nominal capacity. This simultaneously increases the cutting sequence for more efficient work with thin sheet metal. Switching from fast to slow is done using a selector switch on the control panel. • Hydro-mechanical drive via a powerful toggle lever • Easy cutting gap adjustment on both sides • 2 cylinders mounted externally on the machine, easily accessible • Vertical, stable guides • Upper and lower blades each with 4 cutting edges • Hydraulic overload protection • Proportional force of the hold-down clamps • The machine frame is a fully welded construction and is machined in one setup (no screwed parts) • Portable electric foot switch • Blades suitable for black sheet metal and stainless steel • Ball transfer units in the table • 1 angle stop • 1 support arm • CE-compliant Siegfried Volz Machine Tools Bledevkw Dvopfx Aa Isn Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2017, x-travel 2010 mm y-travel 3010 mm z-travel 200 mm Capacity 4000 bar table load 1200 kg/m2 feed 10/5 m/min Table 3000 x 2000 mm control FANUC dimensions of the machine ca. 10,3 x 4,2 x 3,25 m used CNC water cutting machine in gantry style - high pessure pump 4000 bar - cutting tool WJS Basic cutting head, abrasiv dosing device - CAD/CAM software IGEMS 2D CAD, 2D CAM and AWJ modul Bjdpfx Aaozmitkj Ijln - pressure vessel 200 ltr./ abrasive tower 1 tonne - abrasive controling package - abrasive disposal package - Remote control software - collision protection package - nesting level 1 + 2

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 1,600 mm, total width: 1,225 mm, total height: 1,850 mm, overall weight: 1,470 kg, warranty duration: 12 months, hopper volume: 550 l, rotor diameter: 276 mm, rotational speed (max.): 13 rpm, blade width: 20 mm, power: 7.5 kW (10.20 HP), rotor width: 400 mm, Genox M400 Twin Shaft Shredder, suitable for shredding various types of materials including plastics, wood, packaging materials, metals (copper, hard drives etc), Robust, heavy duty construction with easily replaceable wear parts ensures reliable operation, long service life and low maintenance operation. Bodpfx Aajz Hytro Ioln The machine is equipped with a 7.5kW drive motor and oversized, heavy duty reduction gearbox providing high torque, low speed operation. Blade width and hook configuration can be specified to suit the specific application and output size requirements. The shredding blades and spacers are manufactured from heat treated, high quality, precision ground specialist steels to ensure long life, shred quality and minimal operational costs.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, power: 190 kW (258.33 HP), filling opening width: 1,400 mm, filling opening length: 6,500 mm, number of blades: 286, rotational speed (max.): 56 rpm, rotor diameter: 390 mm, rotor width: 1,400 mm, Genox J1400 Series - Heavy Duty Horizontal Four Rotor Shredder suitable for processing long lengths of material i.e. pipe, profiles etc. 190kW combined shaft motor power (1 x 55kW + 3 x 45kW) and an 18.5kW hydraulic power unit for the material feeder. The machine is equipped with heavy duty oversized gearboxes giving an 80rpm shaft speed. Four 1400mm wide x 460mm diameter rotors with 286 pcs of blades in total. The blades are 40mm concave reversible design manufactured from high quality, heat treated alloy steel. Material force feeding is regulated according to motor loading to achieve optimal throughput. These parameters can be easily configured on site to suit the materials being processed. Bledpfx Aaez H Az Eo Ion Output size is controlled by a replaceable screen mounted beneath the lower rotor shaft, the size of which can be determined to suit the application. We also manufacture an 800mm version of this machine along with twin rotor and twin shaft (shear rotor) machines. Please contact us for more information and/or to discuss your requirements.

Condition: new, Year of construction: 2026, functionality: fully functional, rotor diameter: 650 mm, rotor width: 2,200 mm, type of input current: three-phase, rotational speed (max.): 80 rpm, warranty duration: 12 months, Genox BH2200 Series - Heavy Duty Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. 180kW combined motor power (150kW & 220kW options also available) with heavy duty oversized gearboxes, 80rpm shaft speed as standard. 2200mm wide x 650mm diameter Rotor with 95+6 pcs, 40mm Concave reversible alloy steel blades. 60mm blades are also available. Hydraulic force feeding of material according to motor loading and timers. Parameters can be easily configured on site to suit the materials being processed. Output size is controlled by replaceable screens mounted beneath the rotor shaft in hydraulic operated screen support cradle. Bljdez Hyyxjpfx Aa Ijn

Condition: new, Year of construction: 2026, functionality: fully functional, rotor diameter: 650 mm, rotor length: 2,800 mm, power: 220 kW (299.12 HP), type of input current: three-phase, rotational speed (max.): 80 rpm, warranty duration: 12 months, Equipment: rotational speed infinitely variable, Genox BH2800 Series - Heavy Duty Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. 220kW combined motor power (180kW & 264kW options also available) with heavy duty oversized gearboxes, 80rpm shaft speed as standard. 2800mm wide x 650mm diameter rotor with 125 pcs, 40mm concave, reversible high quality heat treated alloy steel blades. 60mm blades are also available as an option. Bjdpfxsz Hy Ago Aa Ieln Hydraulic force feeding of material according to motor loading and timers. Parameters can be easily configured on site to suit the materials being processed. Output size is controlled by replaceable screens mounted beneath the rotor shaft in hydraulic operated screen support cradle. Standard screen size is 40mm, other sizes can be provided on request.

Condition: new, Year of construction: 2026, functionality: fully functional, rotor diameter: 480 mm, rotor width: 2,000 mm, power: 150 kW (203.94 HP), type of input current: three-phase, rotational speed (max.): 80 rpm, warranty duration: 12 months, Genox K2000 Series - Heavy Duty Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. Twin 75kW drive motors (2 x 55kW & 2 x 110kW dual drive options also available) with heavy duty oversized gearbox, 80rpm shaft speed as standard. 2000mm wide x 480mm diameter Rotor with 95pcs, 40mm Concave reversible alloy steel blades. 60mm blades are also available. Hydraulic, fast acting swing type ram force feeding of material according to motor loading and timers. Bodpfx Aasz Hyxne Isln Parameters can be easily configured on site to suit the materials being processed. Output size is controlled by replaceable screens mounted beneath the rotor shaft in hydraulic operated screen support cradle.

Condition: new, Year of construction: 2026, rotor diameter: 400 mm, number of blades: 78, rotor length: 1,400 mm, power: 75 kW (101.97 HP), type of input current: three-phase, rotational speed (max.): 80 rpm, warranty duration: 12 months, Genox V1500 Series - Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. 75kW Drive Motor with heavy duty oversized gearbox, 80rpm shsft speed as standard. Bljdjz Hyzvjpfx Aa Ijn 1400mm wide x 400mm diameter Rotor with 77pcs 40mm Concave reversible alloy steel blades. Hydraulic force feeding of material according to motor loading and timers. Parameters can be easily configured on site to suit the materials being processed. Output size is controlled by replaceable screens mounted beneath the rotor shaft. An optional "Long Bed" machine is available which has an enlarged shredding chamber with 1.3m distance between the rotor and hydraulic feeder which is well suited for processing bulky items such as Pallets, Wheelie Bins and IBC's.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, power: 148 kW (201.22 HP), filling opening width: 1,200 mm, filling opening length: 6,000 mm, number of blades: 150, rotational speed (max.): 80 rpm, rotor diameter: 390 mm, rotor width: 1,200 mm, Genox J1200 Series - Heavy Duty Horizontal Four Rotor Shredder suitable for processing long lengths of material i.e. pipe, profiles etc. 148kW combined shaft motor power (4 x 37kW) and an 18.5kW hydraulic power unit for the material feeder. The machine is equipped with heavy duty oversized gearboxes giving an 80rpm shaft speed. Four 1200mm wide x 390mm diameter rotors with 150 pcs of blades in total. The blades are 40mm concave reversible design manufactured from high quality, heat treated alloy steel. Material force feeding is regulated according to motor loading to achieve optimal throughput. These parameters can be easily configured on site to suit the materials being processed. Output size is controlled by a replaceable screen mounted beneath the lower rotor shaft, the size of which can be determined to suit the application. We also manufacture an 800mm version of this machine along with twin rotor and twin shaft (shear rotor) machines. Please contact us for more information and/or to discuss your requirements. Bledpfx Aasz Hy Enj Ien

Condition: used, Year of construction: 2004, Cut capacity 3300mm length x 2050mm vertical or 1960mm horizontal 300mm max blade dia 80mm max depth of cut 3kw motor Unbraked rolllers for panel handling Precision guide rails for saw unit Saw beam locking TRK front and rear extraction Overall floor area [ freestanding on legs ] 4451mm long x 2859mm high x 1598mm wide. Blsdpfx Aez Hzgmoa Ion Serial nr - 35111 Year - 2004 CE [purchased refurbished 2021]

Year of construction: 2014, condition: like new (used), functionality: fully functional, SCA Mini 400P with a 400 mm saw blade Bodpsz H Ni Asfx Aa Ioln Single-head saw with a saw blade that moves from below and can be swiveled. The feed side is on the left for making miters from 15° to the left up to 15° to the right, as well as intermediate miters. + Fermo VIS 3780 DX stop/measuring system with digital display Profile support and length stop, adjustable via handwheel with readings on a digital display. + 4-meter roller conveyor

Condition: used, Year of construction: 2008, cutting width (max.): 2,200 mm, controller model: POWERCONTROL, cutting length (max.): 4,300 mm, Equipment: scorer, TECHNICAL DETAILS Maximum panel width: 2,200 mm Maximum panel length: 4,300 mm Maximum main saw blade overhang: 125 mm Maximum feed rate: 80 m/min Bjdpfxoz Eklve Aa Ieln Saw unit Maximum tool diameter, main saw: 450 mm Motor power, main saw: 13.5 kW Maximum tool diameter, scoring saw: 180 mm Motor power, scoring saw: 2.2 kW MACHINE DETAILS Control system: POWERCONTROL Lift table, number of levels: 4 Clamping system, clamping jaws: 10 EQUIPMENT Lift table Saw unit Scoring unit The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 5552