Used Digital Colour Press for sale (21,667)

Condition: used, This listing is for Un-used Acon On Call GK114-13B dual blood digital meter The unit is NEW and is ready for immediate use Dual Testing Capability: Measures both blood glucose and ketone levels. Kdedpfxjxhgc Ss Ag Ueg Memory Storage: Stores up to 450 test results, including date and time. Measurement Units: Displays results in either mg/dL or mmol/L, depending on regional standards. Test Reminders: Allows setting up to five test reminders to aid in regular monitoring. Quality Control: Supports quality control testing with On Call control solutions to ensure accuracy. Battery: Operates on two CR2032 coin cell batteries, which are user-replaceable

Condition: used, This listing is for the Gilson PIPETMAN P200 20-200uL Single Channel Pipette Colour Code Light Orange The unit is in full working condition and is ready for immediate use Patented volume locking system preventing accidental changing of volume setting Adjustable tip ejector button to adapt to both right- and left-handed users Kjdjxv Dqijpfx Ag Uodg Clip mechanism allows easy and safe removal of tip ejector Lowest pipetting forces on the market give increased comfort even when pipetting for long periods GLP features include 2-D bar code for traceability

Condition: used, This listing is for the Gilson PIPETMAN P2 0.2-2uL Colour code Red The unit is in full working condition and is ready for immediate use Patented volume locking system preventing accidental changing of volume setting Adjustable tip ejector button to adapt to both right- and left-handed users Kodpfjxv Dqvsx Ag Uodg Clip mechanism allows easy and safe removal of tip ejector Lowest pipetting forces on the market give increased comfort even when pipetting for long periods GLP features include 2-D bar code for traceability

Condition: used, This listing is for the PIPETMAN L P1000L 100-1000uL Colour-code BLUE Kdodpexv Drasfx Ag Uog The unit is in full working condition and is ready for immediate use Patented volume locking system preventing accidental changing of volume setting Adjustable tip ejector button to adapt to both right- and left-handed users Clip mechanism allows easy and safe removal of tip ejector Lowest pipetting forces on the market give increased comfort even when pipetting for long periods GLP features include 2-D bar code for traceability

Condition: used, This listing is for a Grant QBD1 Digital Dry Block Heater. (1 of 2 available) The unit is in full working condition and is ready for immediate release. Discover the precision and efficiency of the Grant QBD1 Digital Dry Block Heater, designed to meet the rigorous demands of modern laboratories. This high-precision heating system offers exceptional temperature control, making it ideal for a variety of applications, including enzyme digestions, nucleic acid hybridizations, and general laboratory tasks. Key Features: Wide Temperature Range: Operates from ambient +5°C to 130°C, providing versatility for various heating needs. Single Block Position: Equipped with one removable and interchangeable block, allowing for easy customization based on your specific requirements. Digital Temperature Control: Enjoy precise temperature management with stability and uniformity of ±0.1°C, ensuring reliable results every time. Rapid Heat-Up Time: Quickly reaches your desired temperature, enhancing workflow efficiency in busy lab environments. Integral Timer Function: Optional external probe capability allows for accurate in-sample or in-block temperature monitoring. Kdsdpfx Aexx Aivsg Usg Technical Specifications: Dimensions: 200 x 240 x 120 mm (w x d x h) Robust and Compact Design: Features a contemporary design and includes a block extraction tool for safe and easy block removal. Benefits: High Precision: Achieve consistent and accurate heating for sensitive experiments. User-Friendly: The intuitive design ensures ease of use, making it suitable for both experienced and novice lab personnel. Durable Construction: Built to withstand the demands of daily laboratory use, ensuring long-lasting performance. Elevate your laboratory's capabilities with the Grant QBD1 Digital Dry Block Heater. Experience unmatched precision and reliability, making it an essential tool for any scientific setting.

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, control type: CNC control, controller manufacturer: Delem, bending force (max.): 50 t, working width: 1,500 mm, stroke length: 215 mm, number of axes: 4, Equipment: CE marking, foot remote control, Used Trumpf Trumabend V 50 Hydraulic cnc 50ton x 1.5metre Press Brake For Sale Kodpfx Ajx Nip Hsg Uodg Brand: Trumpf Type/Model: Trumabend V 50 Year:2000 Trumabend V 50 Technical details Capacity: 50ton x 1.5metre: Folding length: 1500 mm CNC Brand: Delem Total axis: 4 Y1, Y2, X and R Axis

Condition: good (used), Pneumatic press, pneumatic punch press, multi-function punch press, punch press, universal punch press, punching machine, hydraulic press, basic press, punching press -Manufacturer: Schüco, base press with base -Item No.: 280 226 with base 299 504 -Stroke: 20 mm -Pressing force: 32 kN -Operating pressure: 7 bar Kjdpfx Aex Tdmnog Uodg -Operation: via foot switch -Receiver: Groove 16/28 mm, see photo technical drawing -Dimensions: 400/400/H930 mm -Weight: 91 kg

Condition: new, functionality: fully functional, type of input current: DC, input voltage: 220 V, Full colour laser printers (2), of which one is brand new Kdjdsx Ir R Djpfx Ag Uog Including 1 used and 3 new Pro Decks Lite C1 Includes: 29 toners (T01 Yellow, T01 Cyan, T01 Black, T01 Magenta) 8 waste toner boxes 2 sets of accessories (including Upright Control Panel, Pod Deck Lite Attachment Kit-B, Auto Gradation Sensor-A1, 4 T01 toners, Copy Tray, Printer Cover and C13 mains cable) 3 copy trays

Condition: used, Single-column eccentric press HELMERDING Type EH 25 B Machine No. 5917 Year of manufacture: 1993 Pressing force: 25 tons Throat depth: 180 mm Table area: 560 x 360 mm Ram area: 315 x 150 mm Table through-hole: 150 x 100 mm Stroke adjustment: 8 - 82 mm Ram adjustment travel: 60 mm Installation height max.: 330 mm Clamping pin bore: Ø 40 mm Kdjdjyath Tjpfx Ag Uog Strokes per minute: 145 Table height adjustment: 150 mm Table height above floor: 630 - 780 mm Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Hydraulic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand control - Automatic central lubrication by BEKA lubrication system - Electrical cabinet with 2-channel contactor control - Press table height-adjustable via 2 threaded spindles - UVV [accident prevention regulations] according to VBG 7n 5.1 for manual loading operations - Electrical diagram Space requirements (L x W x H): 1600 x 1100 x 1900 mm Weight: 2 tons Good condition

Condition: used, Eccentric punch press HAULICK + ROOS type RVD 125 double column - eccentric press Machine No. 212560 Year of construction 1981 pressure force 125 ton. table size 880 x 800 mm Kdedpfx Ashlnzkjg Ueg table opening 470 x 140 mm column width 900 mm column width lateral 415 mm ram stroke 45 mm slide adjustment travel 0-80 mm Installation height on the picture 340 mm Stroke rate 50 to 300 strokes/min. Motor power main drive 22 kW Mains connection 380 volt, 50 Hz - Double connecting rod drive with 4-fold eccentric shaft for off-center ram pressure load - adjacent electrical cabinet - NC roll feed EBU, width 250 mm, year 2003 - adjacent control panel for roll feed - strip running direction from left to right space requirement (press) L x W x H 3000 x 2000 x 3020 mm transport height 2950 mm weight of the press approx. 11 ton.

Condition: used, Year of construction: 1985, pressure 500 t distance between columns 3100 mm stroke fix 300 mm no. of strokes 20 - 70 Hub/min dayligth (stroke and adjustment up) 1000 mm column travel -side 1400 mm table surface area 2800 x 1600 mm ram surface 2800 x 1450 mm power requirement 90,0 kW weight of the machine ca. 100,00 t required space 5,75 x 3,2 x 7,8 m ram adjustment 100 mm height over floor 6,4 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment Kdedpfevut N Aex Ag Ueg as is where is, WITHOUT putting into operation, stored in dismantled condition (no PLC + main motor available)

Condition: new, Year of construction: 2025, pressing force: 100 t, - Capacity 100 tons - Cylinder stroke 400 mm - Working width 1000 mm - Pressure gauge - Emergency stop - 400 V Kdodpfx Aswfnqzog Ueg

Condition: new, Year of construction: 2025, - Capacity 160 tons - Cylinder stroke 400 mm Kdjdpfx Ajx Azghog Usg - Working width 1000 mm - Pressure gauge - Emergency stop - 400V

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced Kedpfx Aox A U Ncog Ujdg • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: used, Year of construction: 1963, total height: 2,880 mm, total width: 1,500 mm, total length: 2,300 mm, Empty weight: 8.000 kg Price: On request - Year: 1963 - Documentation available: No - CE certificate present: No - Serial number: 12691 - Motor power: 7.5kW - Table width: 650mm - Table length: 950mm - Ram width: 340mm - Ram length: 550mm - Min. stroke: 25mm - Model: Eccentric - Max. stroke: 118mm - Height adjustment: 75mm - Power: 160.0ton - Transport dimensions: 2300mm x 1500mm x 2880mm (l x w x h) - Transport weight [kg]: 8000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Kjdpfx Agswmfrrj Uodg Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1989, total height: 2,750 mm, total width: 1,700 mm, total length: 1,600 mm, Empty weight: 4.000 kg - Year: 1989 - Documentation available: No - CE certificate present: No - Serial number: 4414 - Motor power: 5.5kW - Table width: 560mm - Table length: 800mm - Ram width: 300mm - Ram length: 450mm - Min. stroke: 8mm - Model: Eccentric - Max. stroke: 100mm - Number of columns: 1 - Power: 63.0ton - Transport dimensions: 1600mm x 1700mm x 2750mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information Kodpfxjx Dkfpj Ag Ujdg VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 3,350 mm, total width: 1,600 mm, total length: 2,650 mm, Empty weight: 9.000 kg Price: On request - Documentation available: Yes - CE certificate present: No - Table width: 495mm - Table length: 650mm - Ram width: 400mm - Ram length: 650mm - Min. stroke: 10mm - Model: Eccentric - Max. stroke: 90mm Kjdpexry Szofx Ag Uedg - Number of columns: 2 - Power: 70.0ton - Transport dimensions: 2650mm x 1600mm x 3350mm (l x w x h) - Transport weight [kg]: 9000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1981, total height: 2,850 mm, total width: 1,800 mm, total length: 1,100 mm, Empty weight: 6.000 kg - Year: 1981 - Documentation available: No - CE certificate present: No - Serial number: 10340 - Table width: 550mm - Table length: 630mm - Ram width: 500mm - Ram length: 1100mm - Model: Hydraulic - Max. stroke: 160mm - Power: 100.0ton Kdedpfxoxywkqe Ag Usg - Transport dimensions: 1100mm x 1800mm x 2850mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1986, total height: 2,700 mm, total width: 2,550 mm, total length: 1,350 mm, Empty weight: 7.000 kg - Year: 1986 - Documentation available: No - CE certificate present: No - Serial number: 5499 - Motor power: 20.0kW - Table width: 525mm - Table length: 630mm - Ram width: 500mm - Ram length: 1100mm - Model: Hydraulic - Max. stroke: 200mm - Power: 63.0ton - Transport dimensions: 1350mm x 2550mm x 2700mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Kdjdpfx Aex Ad Hkeg Ueg Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2009, total length: 5,500 mm, total width: 2,300 mm, total height: 2,900 mm, Weight: 18.700 kg Price: On request - Year: 2009 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 83261 - Drive system: CNC - Press force [ton]: 250 Kdodpfx Agsxrl Hds Uog - Max. working width [mm]: 4300 - Column gap [mm]: 3800 - Backgauge depth [mm]: 1000 - Options: Finger safety guard - Transport dimensions: 5500mm x 2300mm x 2900mm (l x w x h) - Transport weight [kg]: 18700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1990, total length: 1,860 mm, total width: 940 mm, total height: 1,410 mm, Weight: 1.200 kg Press brake + sheet metal shear Combintation-Machine - Year: 1990 - Documentation available: No - CE certificate present: No - Drive system: Conventional - Power [kW]: 3.0 - Press force [ton]: 34 - Max. working width [mm]: 1300 - Column gap [mm]: 1450 - Throat depth [mm]: 100 - Backgauge depth [mm]: 600 - Tools included: Yes - Transport dimensions: 1860mm x 940mm x 1410mm (l x w x h) - Transport weight [kg]: 1200kg Kdodpfx Agjxx Smdo Uog - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 3,000 mm, total width: 600 mm, total height: 2,130 mm, Weight: 2.500 kg - Documentation available: No - CE certificate present: No - Serial number: 2439 Kdsdpfexr Dnmjx Ag Usg - Drive system: Conventional - Press force [ton]: 83 - Max. working width [mm]: 2500 - Column gap [mm]: 2700 - Transport dimensions: 3000mm x 600mm x 2130mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1999, total height: 2,200 mm, total length: 5,200 mm, total width: 800 mm, Empty weight: 950 kg - Year: 1999 - Documentation available: No - CE certificate present: No - Serial number: 13301 - Press drive: Pneumatic - Max. workpiece width [mm]: 4500 - Max. workpiece height [mm]: 1550 - Max. workpiece depth [mm]: 600 - Cylinder adjustment: Manual - Vertical pressing rams [pcs]: 3 - Horizontal pressing rams [pcs]: 4 - Transport dimensions: 5200mm x 800mm x 2200mm (l x w x h) - Transport weight [kg]: 950kg - Transport packages [pcs.]: 1 Financial information Kodpfx Agewyn Nae Usdg VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, - Documentation available: No - CE certificate present: No - Max. workpiece length [mm]: 3200 - Max. workpiece width [mm]: 1600 - Number of stages [pcs]: 6 - Heating boiler present: Yes - Heating type: Water heated - Max. working temperature [°C]: 90 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Kdsdpfx Agjwmm Ube Uog Yorick Diebels

Condition: used, Veneer press continuous press gluing press plate press Bürkle HSO 240/D 340/140 Kdjdpfx Agswng Tyj Ueg Press dimensions: 3400x1400mm Max discharge pressure 240T Max pressing pressure 6 kg/cm² Cylinders 8 pcs. with diameter 110mm Stroke 150mm Solid plates 40mm Water heated with boiler up to 60 degrees. Plates can be heated up to 150 degrees with the right boiler. Press dimensions: 2500x3900xH2800mm, 8500kg Input conveyor dimensions: 2200x3600mm, 500kg Documentation still available, first owner! Sold as one unit including conveyor belts - Details: - └ Description: The Omma glue roller is not available - Documentation available: No - CE certificate present: No - Max. workpiece length [mm]: 3400 - Max. workpiece width [mm]: 1400 - Material of press plates: Steel - Number of cylinders [pcs]: 8 - Total working pressure [ton]: 240 - Working pressure [kg/cm²]: 6 - Heating type: Water heated - Max. working temperature [°C]: 150 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels