Used Digital Colour Press for sale (19,390)

Condition: excellent (used), Year of construction: 2018, EFI Vutek GS2000Lx Pro Ultradrop Superwide-format hybrid printer (flatbed + roll-to-roll) Printing technology: UV LED (“cool cure”) Designed for industrial-scale production (signage, POP, display graphics) Colour configuration: 8 colours (CMYK Lc Lm LY Lk) + white Rsdsy H I Rqspfx Afnet RIP: Workstation + Fiery RIP included Mileage: less than 300.000m² Printhead status: very good. In production-demo possible Decommissioning, transport and installation possible upon request. Maximum speed (Fast-4 mode): up to 186 m²/h POP quality (600 dpi): ~70 m²/h High quality (1000 dpi): ~21 m²/h Board-to-board time: < 5 seconds For further technical details please refer to attached brochure

Condition: good (used), Year of construction: 2008, functionality: fully functional, Full-option used 3-meter press brake Type: E Brake 150 3100 Capacity: 3100 x 150 tons E-Control (new original Safan CNC!) 8-axis CNC (Y1, Y2, X1, X2, R1, R2, Z1, and Z2) Hydraulic upper and lower clamping Year of manufacture: 2008 Preparation for bending aid 1 set of tools included. Redpfxoyw Suhe Afnet 2 machines available

Condition: good (used), functionality: fully functional, Press Brake Brand: AMADA Model: HFT 80/25 Capacity: 2500 x 80T 4 axes Distance between uprights: 1800 mm Dimensions: 3500 x 1500 x 2100 mm Weight: 6,500 kg Rodpfjwivddox Afnet Equipped with new and used tooling

Condition: reconditioned (used), functionality: fully functional, stroke length: 105 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, table height: 970 mm, throat depth: 200 mm, total length: 1,420 mm, total width: 1,100 mm, total height: 1,800 mm, overall weight: 2,800 kg, working width: 60 mm, back gauge: 345 mm, control type: manual, actuation type: hydraulic, Press Brake Brand: PROMECAM Model: PPH25.12B Capacity: 1200 x 25T Rsdpfsxwukcjx Afnjt Distance between uprights: 1020 mm Throat depth: 200 mm

Condition: reconditioned (used), functionality: fully functional, LVD 4000 x 200T Press Brake Type PPBL 200/40 Capacity 4000 x 200T Rsdpfxswtmi Ee Afnjt Maximum stroke 150 mm Weight 13.5T With mobile blade rack

Condition: reconditioned (used), functionality: fully functional, Press Brake Brand: HACO Capacity: 3000 x 135T Distance between uprights: 2600 mm Throat depth: 250 mm Ram stroke: 120 mm Opening: 325 mm Descent speed: 10 mm/s Working speed: 10 mm/s Redpfx Afsyapdqjnot Return speed: 60 mm/s Table height: 915 mm Hydraulic power unit: 10 HP Without pit Supplied with AMADA PROMECAM tooling Backgauge with digital display Weight: 8T Equipped with new tooling

Condition: used, Press Brake Brand: LVD Capacity: 3000 x 135T Model: PPBL 135/30 Distance between uprights: 2550 mm Rodpfx Asx Tqt Uofnjt Throat depth: 200 mm Stroke: 130 mm Working speed: 8 mm/s Number of backgauge axes: 2 Motor power: 8.5 kW

Condition: like new (used), Year of construction: 2024, operating hours: 260 h, functionality: fully functional, cutting width (max.): 530 mm, cutting length (max.): 750 mm, total width: 2,000 mm, input current: 32 A, total height: 2,400 mm, working width: 510 mm, total length: 6,100 mm, input voltage: 400 V, space requirement height: 3,000 mm, space requirement length: 7,500 mm, space requirement width: 2,500 mm, Equipment: documentation/manual, MOTIONCUTTER® 530 – Fully Loaded 450W Digital Laser Finishing System Installed December 2024 | Only 260 Operating Hours | As-New Condition Available immediately in the UK. This is a fully equipped MOTIONCUTTER® 530 high-speed digital laser system with Automation Suite, Position Sensor, Waste Separation and Shingling Belt — essentially the complete production configuration originally supplied fully installed and trained at approx. €317,000 Installed December 2024. Only 260 total operating hours since new. This machine is barely run-in. What You’re Getting Core Machine 450W CO₂ sealed-off laser (600W guaranteed output) 510 x 510 mm working area Up to 18,000 mm/s deflection speed ±0.2 mm dynamic tolerance 20,000 hour expected laser lifetime Mistral 530 pile feeder 80–500 gsm Sheet size up to 530 x 750 mm (extendable to 1000 mm) Conveyor System Patented metal mesh belt 0–45 m/min speed Integrated cleaning station Fully Loaded Options Included ✅ Automation Suite Barcode job recognition Automated job handling Workflow XML integration 100% production control on every sheet ✅ Position Sensor On-the-fly X/Y correction to printed mark Critical for precision packaging alignment ✅ Manual Waste Separation Mechanical stripping of finished product from waste ✅ Shingling Belt High-capacity delivery system Software-controlled separation of jobs This is the configuration serious packaging converters buy. Capabilities Cut | Filigree Cut | Kiss Cut Crease | Micro Perforate | Engrave Variable Data Finishing NAMECUT® Personalisation from CSV All in one pass. No tooling. No dies. Ideal For Folding carton short runs Cartonboard packaging Personalised packaging Luxury packaging prototypes High-value sheet finishing Indigo / sheet-fed digital press finishing If you’re currently outsourcing die-cutting for short runs, this replaces that dependency overnight. Condition Installed December 2024 Only 260 hours total runtime Clean production environment Fully operational Available for inspection & test runs in the UK Reason for sale: strategic production shift. Redpfx Afoyk Ip Tonot Why This Is Attractive Skip 8–10 week factory lead time Skip installation delays Skip international shipping Get a fully proven, calibrated machine Save significant capital vs buying new Serious enquiries only. Available immediately.

Condition: like new (used), Year of construction: 2004, AMADA MODEL HFT 8025 80 tons capacity x 2500 bending length hydraulic downstroking press brake complete with CD 2000 4 AXIS colour graphic cnc control, Rodpfxsu A Dgrs Afnjt ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Model Amada HFT 8025 downstoke CNC Press brake Year 2004 Tonnage 100 KN Type CD 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 2500 mm Open height 470 mm Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 7.5kw Weight 6100 kg Bed Length 2500 mm Bed Width 60 mm Open Height 470 mm Throat Depth 420 mm CNC Control Backguage Stoke (X axis) 700 mm/s Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: excellent (used), Year of construction: 2013, Model Amada HFE MK2 80 x 2500 , 8 axis Press Brake Year 2013 Tonnage 80 tonnes Max. Bend Length 2500 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Rsdpfx Ajy Amd Uofnjt Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 110L Motor Power 9kw Weight 5600 Kg guarding Erwin Sick machine mounted light screen guards, side and rear interlocked fencing Dimensions Machine Length 3950 mm Machine Depth 2580 mm Machine Height 2540 mm Distance Between Side Frames 2125mm Beam width 60 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, year of last overhaul: 2024, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the turbulator replaced, connected and tested Rodpeu Thhrofx Afnjt Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel Redpex A U Ncofx Afnet • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: used, functionality: fully functional, This listing is for a second-hand ‘Keyence IM-8030’ digital measuring projector Item for sale: 1 x IM-8030 with the following features: Includes application software Condition: This is a second-hand device, which may show signs of wear (minor scratches or discolouration). The device has been tested for functionality Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment for this! Seaworthy packaging and worldwide shipping available on request! Redpfx Afjyrcw Ijnot A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly. Subject to approval by the leasing company

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, We offer this very good RYOBI 522HE offset printing press, year of construction 2004. Semi auto plate loading, One owner from new. Very clean machine. If you have any questions or need more information, feel free to send us a message or give us a call. Rodjywaq Rjpfx Afnjt

Condition: excellent (used), Year of construction: 2003, Haco 6m x 225ton CNC Pressbrake Great working condition Rodpfx Aoyv Dc Isfnjt 6m capacity x 225ton 2 Axis Year 2003 Light Guards

Condition: good (used), Year of construction: 2008, Full option used 3 meter press brake Type: E Brake 150 3100 Capacity: 3100 x 150 tons E-Control (new original Safan CNC!) 8-axis control (Y1, Y2, X1, X2, R1, R2, Z1 and Z2) Hydraulic top and bottom clamping Year of manufacture: 2008 Bending aid preparation 1 set of tools included. 2 machines available Rjdpfx Afoy Ey Rajnot

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, pressing force: 80 t, control type: CNC control, Equipment: safety light barrier, 1 Used Very Clean Amada 8025 cnc down stroke hydraulic pressbrake for sale Rsdjyzy D Ejpfx Afnot The Amada HFT 8025 is a CNC hydraulic down-stroking press brake designed for precise sheet metal bending with an 80-ton pressing capacity. It is often equipped with the CD 2000 CNC control system, providing 4-axis control (typically Y1, Y2, X, and R) for high accuracy in industrial applications. Key Technical Specifications Year 2010 Feature Standard HFT 8025 Press Force 80 Tons (800 kN) Bending Length 2,500 mm Stroke Length 200 mm Open Height 470 mm Throat Depth 420 mm Motor Power 7.5 kW

Condition: good (used), functionality: fully functional, Press brake AMADA HFP220-4S Type: HFP Number of axes: 8 Touchscreen CNC: AMNC Backgauge stroke: 680 mm Working speed: 200 mm/sec Safety light barrier Sold without tooling Machine is fully functional Rjdoytb Rcspfx Afnjt

Condition: good (used), Hand spindle press, mandrel press, spindle press, hand spindle press, printing press, balance printing press -Manufacturer: Allgaier, manual spindle press -Pressure capacity: approx. 20 tons -Insertion height: 345 mm -Column clearance: 300 mm -Table width: 300 mm / Bore Ø 60 mm -Spindle mount: Ø 40 mm Redpfxjyxda Sj Afnjt -Dimensions: Ø 1420 x 1780 mm -Weight: 277 kg

Condition: used, Year of construction: 2000, total length: 1,000 mm, total width: 1,900 mm, total height: 2,000 mm, Empty weight: 3.000 kg - Year: 2000 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 205570 - Drive system: Conventional - Press model: C-Frame press Rodpfoy Ew Euex Afnot - Press force [ton]: 160 - Max. stroke [mm]: 100 - Table length [mm]: 420 - Table width [mm]: 410 - Table bore diameter [mm]: 60 - Ram length [mm]: 120 - Ram width [mm]: 120 - Transport dimensions: 1000mm x 1900mm x 2000mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Veneer Press OTT JU 90 -used- Redpfx Ajwmmrajfnjt ----- Technical Specifications ----- Pressing area: 2,550 x 1,350 mm, Power per heating plate: 9100 W, Number of cylinders: 4

Condition: excellent (used), functionality: fully functional, number of ink cartridges: 5, color channels: 5, resolution (max.): 4,800 dpi, paper weight (min.): 52 g/m², paper weight (max.): 360 g/m², paper width (min.): 148 mm, paper width (max.): 330 mm, number of feeding trays: 6, total length: 5,100 mm, total width: 910 mm, total height: 1,510 mm, counter reading (black): 329,094, counter reading (color): 1,692,141, Equipment: auto duplex, brochure finisher, documentation/manual, Ricoh Pro C7100X with very low meter count! This machine is in excellent condition and has only made 2,048,198 prints! The machine has been fully tested and is immediately ready for use. The machine is equipped with an E-43A Fiery Controller with Command Workstation 6.3 installed. This Fiery includes the ES-2000 Spectrophotometer to enable optimal color calibration. The Ricoh Pro C7100X features 2 dual Vacuum Feeders (LCIT RT5100) and an SR5060 Booklet Maker Finisher. Rjdsy E N U Ispfx Afnet This machine has been thoroughly inspected and extensively tested by our own specialized technical team. If you require any further information, please do not hesitate to contact us. Worldwide shipping available.

Condition: excellent (used), Year of construction: 2013, Vacuum press, vacuum table, Joos vacuum table with silicone membrane Universally applicable press, veneer press for veneering, laminating, form bonding, contour veneering, edge banding, etc. With this press, you can, with certain limitations, forgo a hydraulic veneer press. New heat-resistant silicone membrane, extremely stretchable and easy to clean. Also suitable for shaping preheated thermoplastic materials such as acrylic glass or mineral-based materials. Internal frame dimensions approx. 2900 x 1410 mm, usable area approx. 2800 x 1300 mm Working height approx. 900 mm Becker VT4.40 vacuum pump, 400V, 1.5 kW with 40 m³/h output and two 200-liter vacuum tanks, ensuring comfortable operation and fast evacuation. Electronic vacuum pressure switch, so the pump switches off when the set vacuum is reached and does not run continuously. Mobile on four swivel castors, lockable Frame easily folds open, secured with two latches Double frame for quick membrane replacement. A new silicone membrane is currently installed. Quick vacuum distribution via grooved base plate CE marking Original paintwork, some spots touched up The silicone membrane and base plate have been renewed, machine is immediately operational Dimensions approx. 3100 x 1550 x 1020 mm (LxWxH). Weight approx. 550 kg. Rsdpsy Hl Hpsfx Afnot The machine can be demonstrated by appointment at our premises. We only offer machines that are ready for demonstration in our warehouse; see "other offers from this supplier."

Condition: good (used), Year of construction: 2012, operating hours: 5,812 h, Baler Presto HPK 50 HS, year 2012, with perforator and inclined conveyor (sliding belt conveyor) Manufacturer: Presto Model: HPK 50 HS Year of manufacture: 2012 Operating hours: 5,812 Drive power: 30 kW Pressing force: 50 t Filling opening: 1600 x 650 mm (LxW) Channel cross-section: 700 x 950 mm Max. filling volume: 1.06 m³ Cycle time: 19 s Tying: 4-fold Throughput rate at 35 kg/cbm: 5.5 t/h 60 kg/cbm: 8.8 t/h 100 kg/cbm: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8420 x 1900 x 2400 mm (LxWxH) Machine weight: approx. 10,500 kg Perforator, hydraulically movable Drive power: 2 x 4 kW / 400 V Rsdey Idifopfx Afnst Throughput: approx. 220 m³/h Clear feed opening: 1380 x 1200 mm Inclined conveyor: Length: 7,931 mm Belt width: 1,400 mm Total width: 2,026 mm Incline: 29° Speed: 0.6 m/s Materials: Paper, cardboard, film, PET bottles Please note: All technical data are based on manufacturer specifications. We accept no liability for the given information or possible errors. Sale is subject to prior sale and changes, and may be revoked at any time. Viewing is possible by arrangement. Sale ex works, prepayment required, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, pressing force: 90 t, Equipment: CE marking, 1 Used Morgan Rushworth year 2019 2.6metre x 90ton Downstroke Cnc pressbrake for sale Rodpfxsyziuge Afnjt Model: PBS CNC 2600/90 Year: 2019 With modern ESA touch screen cnc control 4axis in total - 2 axis back gauge Euro style tooling and tool holders Upper and Lower Tooling VIDEO AVAILABLE UPON REQUEST