Used Digital Color Press for sale (25,113)

Condition: good (used), Year of construction: 1991, Used Darley press brake Type EHP 50 20 15 Capacity 2050 x 50 tons Fsdpfoz N Exgex Aikopp Delem control system Y1, Y2, and X-axis CNC Includes a set of tooling

Condition: used, Year of construction: 1974, pressure 075 t throat 380 mm stroke 16- 140 mm number of strokes - idle run 105 /min shut height (stroke down, adjustm. up) 260 mm ram adjustment 80 mm table surface area 750 x 640 mm ram surface 500 x 200 mm hole in the table 150 mm table height over floor 800 - 920 mm total power requirement 7 kW weight of the machine ca. 4 t dimensions of the machine ca. 1,7 x 0,85 x 2,4 m Machine has an adjustable table and air operated clutch and brake. Fpsdpfx Aisz N Hu Njkop

Condition: ready for operation (used), Year of construction: 1985, machine/vehicle number: 1304, functionality: fully functional, pressing force: 367 t, stroke length: 100 mm, table width: 525 mm, table length: 430 mm, table height: 800 mm, No minimum price – guaranteed sale to the highest bidder! EXW – Buyer is responsible for dismantling and loading! The machine was rebuilt in 2018! TECHNICAL DETAILS Press force: max. 3,600 kN Ram stroke: max. 100 mm Ram adjustment: 40 mm Stroke rate: 40 strokes/min Table area: 430 × 525 mm Table height: 800 mm MACHINE DETAILS Connected power: 7.5 kW Mains connection: 3-phase, 380 V, 50 Hz Control voltage AC: 220 V Control voltage DC: 24 V Main motor power: 7.5 kW Oil capacity: 50 l Ambient temperature: +5 °C to +40 °C Average temperature over 24 h: max. +35 °C Humidity: 30–95 %, non-condensing Altitude: 1,000 m above sea level Noise level: ≤ 70 dB Dimensions & Weight Fedpfoz Tf Enex Aikjpp Dimensions (W x D x H): 1,200 x 2,000 x 2,400 mm Space requirement: approx. 1,500 mm Machine weight: 8,000 kg Control cabinet dimensions: 800 × 1,200 × 300 mm Control cabinet weight: approx. 100 kg EQUIPMENT Operating manual Testing information Digital documentation Note: Induction unit is not included in the scope of supply.

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, pressing force: 230 t, Equipment: CE marking, documentation/manual, safety light barrier, Darley hydraulic press brake, 230 tons x 6200 mm, CNC control Delem DA65W Y1/Y2/X/R + crowning + laser safety system. Fpsdpfe Abalwsx Aikep Machine in good condition, with annual maintenance performed by Darley.

Condition: like new (used), Year of construction: 2026, operating hours: 1 h, Super special price, as it was on display at our in-house exhibition. Operating hours: 2 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Fsdpfxetnz Hbo Aikjpp Location: 54634 Bitburg

Condition: used, total length: 3,400 mm, total width: 1,800 mm, total height: 2,600 mm, Year of manufacture: 1994 Colour: Grey Weight: 10.400 kg Price: On request - Year: 1994 - Serial number: 1776 - Drive system: Conventional - Power [kW]: 22.0 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 220 - Max. working width [mm]: 3050 - Column gap [mm]: 2620 - Backgauge depth [mm]: 800 - Max. stroke [mm]: 240 - Crowning system: None - Punch holder: Standard - Tool holder type: European-style - Tools included: Yes - Options: Digital readout - Transport dimensions: 3400mm x 1800mm x 2600mm (l x w x h) - Transport weight [kg]: 10400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Fsdpfx Asybdtcsikjpp

Condition: used, total length: 2,000 mm, total width: 1,100 mm, total height: 2,300 mm, Year of manufacture: 1981 Fodpfxexhcgye Aikopp Empty weight: 500 kg - Year: 1981 - Documentation available: No - CE certificate present: No - Press force [ton]: 63 - Table length [mm]: 710 - Table width [mm]: 505 - Ram width [mm]: 280 - Throat depth [mm]: 250 - Transport dimensions: 2000mm x 1100mm x 2300mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, This listing is for the VWR Digital Heatblock 11 Drybath The unit is in full working condition and is ready for immediate use Core Features & Capabilities Precision Temperature Control Uses PID microprocessor control, typically offering stability and uniformity as precise as ±0.1 °C. Temperature range often spans from ambient +5 °C up to approximately 120 °C, with some models reaching 150 °C, depending on configuration. Flexible, Modular Design Supports interchangeable modular aluminum blocks, accommodating a wide range of vessel types—microtubes, PCR strips, centrifuge tubes, vials, and microplates. These blocks often include a thermometer well and are engineered for close tube-to-block contact to maximize heat transfer. Fpodpfx Aijxhfgpekop Digital Interface & User Safety Features LED or touchpad controls, with separate displays for set-point and actual temperature, plus a timer function with audible alarm when the set time or temperature is reached. Equipped with safety enhancements such as a “Hot” warning light when the block temperature exceeds around 40 °C. Calibration mode often allows you to calibrate using an external temperature device (RTD probe). Versatility & Applications Ideal for a broad range of lab uses including enzyme reactions, immunoassays, DNA denaturation, ELISA, melting/boiling point determination, activation or incubation of cultures, protein denaturing, and other routine laboratory protocol

Condition: excellent (used), Hess Corpus Press Type: Export, Pneumatic Manufacturer: Hess Type: Export Maximum workpiece size: 2,500 x 1,500 mm Press force: 1,400 kp pressing capacity per pressure unit at 15 bar Vertical cylinders: 2 + 2 pressure cylinders Horizontal cylinders: 2 + 2 pressure cylinders Dimensions: 3,900 mm x 2,500 mm x 600 mm Weight: 1,060 kg Hess Corpus Press Export, pneumatic 2 vertical pressure assemblies, each with 2 pressure cylinders, 80 mm cylinder diameter, 110 mm stroke, 1,400 kp pressing force per pressure unit at 15 bar 2 horizontal pressure assemblies, each with 2 pressure cylinders, 80 mm cylinder diameter, 110 mm stroke, 1,400 kp pressing force per pressure unit at 15 bar; the upper unit is easily adjustable thanks to weight compensation Fpsdpfsxgvwpsx Aikep Pressing operation is controlled via 2 rotary slide valves with positions Press – Stop – Release Maintenance unit consisting of pressure regulator (0–15 bar), pressure gauge, and oil mist lubricator Anodized measuring scales, detachable feet Location: Ex works customer site - Immediately available -

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition Fpodpfjxpqy Djx Aiksp

Condition: used, functionality: fully functional, power: 25 kW (33.99 HP), pressing force: 800 t, stroke length: 140 mm, table width: 850 mm, table length: 1,000 mm, distance table to ram: 750 mm, overall weight: 32,000 kg, Equipment: documentation/manual, Two 800-ton knuckle presses, MAYPRES MKN2 800, are available for immediate sale and can be viewed at our Peschadoires workshop in central France. Both presses are in excellent condition, as shown in the technical data sheet and the attached photos. An operating manual and technical documentation are available for each machine. Price upon request. Fodpfo Ahq I Uex Aikepp

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 3830, 3390 & 53, functionality: fully functional, power: 13.5 kW (18.35 HP), pressing force: 160 t, stroke length: 160 mm, table width: 670 mm, table length: 1,000 mm, distance table to ram: 360 mm, total length: 2,340 mm, total width: 2,100 mm, total height: 3,700 mm, overall weight: 14,000 kg, Equipment: documentation/manual, Three COFMO/STANKO gooseneck presses, 160-ton capacity, KD2132 model, are available for immediate sale and can be viewed at our Peschadoires workshop in central France. Fpedpfx Aio Ahrc Nskep All three presses are in excellent condition, as shown in the attached technical specifications and photos. User manuals and technical documentation are available for each machine. Price upon request.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 76 h, functionality: fully functional, RYOBI 524 GX – Year 2006 4-Color Sheet-Fed Offset Printing Press | Technical Specification | Details | |---|---| | Manufacturer | Ryobi, Japan | | Model | 524 GX | | Year of manufacture | 2006 | | Number of printing units | 4 | | Maximum sheet size | 520 × 375 mm | | Minimum sheet size | 100 × 105 mm | | Maximum printing area | 505 × 350 mm | | Stock thickness | 0.04–0.60 mm | | Printing speed | 3,000–15,000 sheets per hour | Fpsdpfs Ahymqjx Aikop | Plate size | 510 × 400 mm | | Feeder pile height | 800 mm | | Delivery pile height | 430 mm or 700 mm, depending on the configuration | | Feeding system | Rotary stream feeder | Maximum printing speed depends on the substrate, consumables, and required print quality. Installed equipment and delivery configuration should be confirmed for this particular machine.

Condition: like new (used), Year of construction: 2019, pressing force: 400 t, pressure:400 t stroke:900 mm Table dimensions:1200 x 1200 mm Deep-Drawing Pillow:150 t travel away deep-drawing pillow:280 mm Fodpofh Izmefx Aikepp Daylight Opening:1100 mm

Condition: excellent (used), functionality: fully functional, pressing force: 450 t, stroke length: 300 mm, table width: 850 mm, table length: 630 mm, distance table to ram: 860 mm, total length: 3,100 mm, total width: 3,100 mm, total height: 4,300 mm, overall weight: 20,000 kg, Equipment: documentation/manual, Ficep PFM 215 screw press, screw diameter 215 mm, 450-ton capacity. In very good condition, as shown in the photos and technical specifications attached. The press is stored in our workshops in Peschadoires, France. Technical documentation will be provided with the machine. Fpjdpfx Ae Ahzbtjikep Price upon request.

Condition: excellent (used), functionality: fully functional, Year of construction: 1995, CNC Hydraulic Press Brake Manufacturer: EHT Model: EHPS 2030 Year of manufacture: 1995 Control system: Cybelec Max. working width: 3050 mm Clamping force: 200 tons Main motor: 18.5 kW Back gauge: 1000 mm Bending aid 2 Multi V dies 2 sets of split tools, 260 mm high Fodpfx Ae Ahm Ibjikjpp Hydraulic crowning in the table

Condition: used, Year of construction: 2011, Pneumohydraulic press Manufacturer: TOX Type: EMB 075.001.A.001 Year of manufacture: 2011 Press force: 750 kN (equivalent to approximately 75 tons of press force) Total stroke: 200 mm Working stroke: 10 mm Machine weight (without tooling): 4,150 kg Fpedpfsz H I I Rsx Aikjp 41126

Condition: excellent (used), machine/vehicle number: 4174847, functionality: fully functional, power: 30 kW (40.79 HP), pressing force: 400 t, stroke length: 250 mm, table width: 1,000 mm, table length: 1,650 mm, table height: 170 mm, distance table to ram: 510 mm, clearance between the columns: 1,370 mm, total height: 4,750 mm, overall weight: 42,000 kg, Equipment: documentation/manual, This press is in very good condition. It is a machine with a "D"-shaped frame, making it very versatile for various applications. The machine is available for immediate sale and is currently stored in our workshops in Peschadoires, France. A technical file will be provided with the press. Attached you will find photos of the press and the technical data sheet. Price available upon request. Fodpfx Aie Ahxlxjkepp

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, very few operating hours very good condition Consisting of: Quickbinder adhesive binding machine with PUR with remote diagnostics with cooling and drying section with three-knife trimming system DGR D09 with compressor Base machine for solo or inline operation for connection with a three-knife trimmer Equipment - rotary feeder, integrated vacuum technology Winjector R - scoring station with split scoring tools for 2 and 4 grooves - feeder and pressing station including 1 set of standard pressing strips - ejector lift with gripper system for lightweight products - stack delivery (standing delivery) - industrial PC with TFT color display and touch screen function - graphical user interface Navigator E - motorized thickness adjustment * PUR spine gluing unit, mobile - Europe for the production of an adhesive-bound brochure Fodeimqucspfx Aikspp with 1 application roller with heated spinner with automatic doctor blade control with specially coated glue tank with integrated PUR bulk melting system * Cooling and drying section * Hotmelt side gluing unit, mounted on the spine gluing unit * Three-knife trimmer D09 – System DGR Base machine for three-side trimming of adhesive-bound products in offline and inline operation - Offline or inline operation possible * Compressor system 1800 dm³/min.

Condition: used, Year of construction: 2007, operating hours: 74,000,000 h, MAN ROLAND 205 E0B • 5-color • Max. format: 520 mm x 740 mm • ProfitPlus Premium package including: - Double sheet feeder - Baldwin cleaning unit - Complete carton guide - EPL (Ergonomic Plate Loading) • Kersten antistatic system • Bacher register system • Powder sprayer: Grafix 72 Digital Plus Fodpfxoytb Ego Aikjpp • Alcosmart • PressManager Smart Interface • Smart R 200 Online • Remote control: RCI for ink and register • ColorPilot Smart • Automatic wash-up device for: - Ink rollers, impression cylinders, blanket cylinders • Electronic sheet feeding control • Nonstop delivery • Delivery-side control panel • JobCard Reader • Carton device • In production • Location: Germany • Availability: immediately

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, input voltage: 380 V, input frequency: 50 Hz, laser power: 6,000 W, laser type: fiber laser, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, finger protection, fume extraction, nozzle changer, safety light barrier, Pipe Size:7500mm/24ft, 9000mm/30ft, 12000mm/40ft Max. Acceleration: 1.0G Repeat Positioning Accuracy: ±0.03mm / ±0.0012in Positioning Accuracy: ±0.05mm / ±0.002in Fodpfxsw I In Rs Aikjpp Pipe Weight Capacity: ≤260Kg / ≤573lbs Round Pipe Processing Range: Φ15mm - Φ230mm / Φ0.6in - Φ9.1in Square Pipe Processing Range: 15×15mm - 230×230mm / 0.6×0.6in - 9.1×9.1in Laser Power: 3-20KW Bevel Cutting: Optional (Multi-functional option available)

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, Kaiser Press 50 -Exhibition machine / 0 operating hours -Electro-hydraulic drive -Operation: Foot pedals and push buttons on the control panel -Pressing force max.: 50 tons -Power consumption: 0.75 kW -Voltage: 230 V -Frame width: 930 mm -Maximum frame width incl. hand crank and electric unit: 1300 mm -Overall height: 1900 mm -Cylinder stroke: 145 mm plus 60 mm threaded spindle -Usable width – working area inside: max. 750 mm -Usable height – working area: 0 mm to 780 mm -Frame depth: 220 mm -Overall depth with foot: 535 mm (can be fastened to the floor) -Support depth of the height-adjustable work table (cross member): 245 mm -Cross member adjustable in 6 positions (hole spacing: 140 mm) -Height adjustment of the cross member via hand crank (no manual lifting required) -Hydraulic unit can be moved sideways: 300 mm (ball-bearing mounted in the upper guide area) -Includes 8 pressure dies with integrated holder: -2t with Ø9.8 mm -3t with Ø11.7 mm -6t with Ø15.7 mm -8t with Ø17.7 mm Fedsztfbwopfx Aikopp -10t with Ø19.8 mm -12t with Ø21.8 mm -13t with Ø24.8 mm -15t with Ø30 mm -Welded construction -Includes work light to illuminate the working area -Pressure indication via pressure gauge -2 prism supports included in delivery -Automatic piston retraction -Integrated tool tray in the lower area of the press Dimensions: L x W x H 0.9 x 0.3 x 1.9 meters / Weight 290 kg Errors and omissions excepted.

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, machine/vehicle number: TO5_8, control type: CNC control, degree of automation: manual, actuation type: electric, controller manufacturer: CoastOne, controller model: Touchscreen 15", bending force (max.): 5 t, working width: 350 mm, stroke length: 250 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, number of axes: 2, type of crowning: manual, back gauge adjustment: CNC-controlled, overall weight: 375 kg, power: 3 kW (4.08 HP), warranty duration: 36 months, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, upper tooling, Small electric table-top press brake with spindle drive TableOne 5 - CoastOne Made in Finland Pressing force: 5T Bending length: 350mm Spindles: 1 x 5T Control: TC15-2D graphic Backgauge: 1-axis controlled X-axis - R-axis manual Tool holder: Type A / R1 / ES Style / AMADA Promecam 1 set of bending tools included 36-month warranty after installation Fsdpe Ah Scgjfx Aikspp Delivery extra; available immediately Visit under power possible anytime by appointment!

Condition: used, CNC Press Brake COLLY 502/A Numerical Command: CYBELEC type DNC 32 P-CM Capacity: Maxi length 2000 mm x 50 T Throat depth: 200 mm Fpodpfx Ao Aihyvsikop Distance between uprights: 1600 mm Back Gear Gauge 1 axe Defective cylinder Right cylinder joint to change Machine functional (only right cylinder joint to change) Voltage: 380 V Length: 2500 mm Depth: 2100 mm Total height: 2400 mm Weight: approx 4 T

Condition: used, Year of construction: 2023, pressing force: 53 t, stroke length: 300 mm, overall weight: 8,000 kg, Hydraulic Press Manufacturer: PROZAP Type: EK0 Bushing Assembly Year of manufacture: 2023 Control system: Siemens Technical data: - Pressing force: 53 t - Stroke: 300 mm - Pneumatic system pressure: 6 bar - Maximum pneumatic supply pressure: 10 bar - Hydraulic system pressure: 255 bar - Dimensions (HxWxD): 3,200 x 2,500 x 2,350 mm - Weight: 8,000 kg Fedpfszbvm Iex Aikepp In our assessment, the bushing press is in mint condition. Technical features: - Press-fitting of bushings, including plastic deformation - TOX pneumatic-hydraulic actuator with 53 t pressing force at 6 bar - 300 mm stroke Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.