Used Diagnostic Tool Motorcycle for sale (39,778)

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 3483420_25_31, Tool cabinet for press brake -ausziehbare drawers, allowing the two-sided access to the tools -beliebige Hoehenverstellung the Einlegeboeden -robust steel construction, powder coated in any RAL palette Bsdpfx Ajx Atq Sebbslr -Lateral Gabelfuehrungsschienen for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) -The cabinet can be dismantled - Number of drawers: 4 Pieces - Dimensions of drawer: - Total height 1200mm / 850mm Overall width / total depth 1050mm - Dimensions of the drawers in a drawer: - Fachhhoehe set at 210mm (is varriabel) - Trade Overall Height 990mm usable ohnen Zwischenboeden - Trade width 130mm available - Trade depth usable 980mm - Number of Zwischenboeden: 3 pieces

Condition: good (used), Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool -Die tool: Forming tool / Press tool, 2-piece -Profile: Angle 90° -Hole: Ø 40 mm -Dimensions: 160/140/H345 mm Bjdpferlppnox Abbelr -Weight: 40.1 kg

Condition: excellent (used), Year of construction: 2000, Stanko Universal Tool Milling Machine Model SMK 25/32 TNC355 Low hours – previously used in a school Machine No.: 55 Year of manufacture: 2000 Travel X: 400 mm, Y: 320 mm, Z: 440 mm Table size: 800 x 320 mm Spindle taper: ISO 40 Spindle speed: 40 – 2000 rpm Feed rate X, Y, Z axes: 10 – 1000 mm/min, infinitely variable Rapid traverse X, Y, Z axes: 1800 mm/min Quill stroke: 60 mm Spindle motor drive power: 3 kW Electrical connection: 380 Volt, 50 Hz Torque. Horizontal spindle: 230 Nm Vertical spindle: 82 Nm Total power: 5.87 kW Control voltage: 110 Volt Feed drive power: 2.2 kW Feed force: 7500 N Distance horizontal spindle to table clamping surface: Minimum 45 mm Maximum 595 mm Distance vertical spindle to table clamping surface: Minimum 45 mm Maximum 490 mm T-slot width: 14 H 7 mm T-slot spacing: 50 mm Number of T-slots: 5 Equipment: - CNC contouring control Heidenhain TNC 135 - 18 spindle speeds - Fixed angle table - Chip collection tray - Coolant splash guard and chip protection shield - Coolant system - Centralized lubrication Blodpfxjw D Hmls Abber - Lighting - Heidenhain control - Electromagnetic clutches for feed transmission - Hydraulic-mechanical axis clamping - Hydraulic tool clamping - Centralized lubrication for guideways and gearbox - Precision ground flat guideways Space requirement (L x W x H): 1685 x 1890 x 1890 mm Weight: 2200 kg Good condition – Ex-school machine Low hours Location: ex-stock 54634 Bitburg - Immediately available -

Condition: good (used), VDI 30 Toolholder Package Brand: EWS Boring bar holders, diameters: 8, 10, 12, 16, 20, 25, 32, 40mm Collet holders ER 16, ER 25, ER 32 External turning tool holders left and right Blsdpfxjxz T Axj Abber Approx. 250 pieces available Also available individually

Condition: used, Year of construction: 1995, x-travel 300 mm y-travel 200 mm z-travel 350 mm table surface area 700 x 270 mm taper in main spindle ISO 40 turning speeds 8: 150 - 1660 U/min turning speed range - horizontal 8. 110 - 1230 U/min feeds 8: 25 - 285 mm/min weight 900 kg quill stroke 60 mm total power requirement 3,7 kW range L-W-H 1,3 x 1,38 x 1,65 m Universal tool milling machine with 2 axis digital display and swiveling vertical milling head with quill, fixed + swiveling table, slotting head, automatic feeds and rapid trverse in all three directions. Machine from a repair shop. The digital display shows 2 axes because the third axis display is defective. All three scales are OK and you can choose which of the 3 axes should be connected. Machine with a just low special price. Blodpsvxllkefx Abbsr Machine dealer with own stock of 1600 m².

Condition: excellent (used), Expander tool by Rothenberger For pipe diameters: 12-15-18-22-28 mm Supplied in a sturdy metal case Bljdpfxsxxaa Sj Abbsr

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 34832025_32, Tool cabinet for press brake -ausziehbare drawers, allowing the two-sided access to the tools -beliebige Hoehenverstellung the Einlegeboeden Bljdpfxsx Atqxo Abbjr -robust steel construction, powder coated in any RAL palette -Lateral Gabelfuehrungsschienen for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) -The cabinet can be dismantled - Number of drawers: 4 Pieces - Dimensions of drawer: - Total height 1200mm / 850mm Overall width / total depth 1050mm - Dimensions of the drawers in a drawer: - Fachhhoehe set at 210mm (is varriabel) - Trade Overall Height 990mm usable ohnen Zwischenboeden - Trade width 130mm available - Trade depth usable 980mm - Number of Zwischenboeden: 3 pieces

Condition: like new (used), Year of construction: 2024, Used machine UNO 20/40 Machine type: Tool presetting device Model: UNO20/40 Manufacturer: Haimer Year of manufacture: 2024 Location: Germany incl. available documentation Bledpfxjxz Tbho Abbjr

Condition: new, The DSB 200 D is a robust tool grinder in the Tool Grinders category by KNUTH, designed for sanding, grinding, and deburring metal parts and tools with precision. This heavy-duty machine features a rigid cast-iron body and a maintenance-free motor, ensuring durability and optimal performance. With a balanced rotor and premium bearings, it operates quietly, providing excellent results while prioritizing safety with an emergency stop switch and a safety observation shield. The DSB 200 D comes standard with a sturdy base and includes two universal corundum wheels, making it ideal for industrial use with a motor rating of 0.9 kW and a speed of 2,950 1/min. This tool grinder is engineered to withstand the rigors of workshop conditions, ensuring long tool life. For those looking for a reliable tool grinder, the DSB 200 D is the perfect choice. Request a quote today to learn more about the Tool Grinders and the unparalleled performance of this product group. Bodpfx Aewub Hnobbslr

Condition: good (used), 2 columns punching tool, cutting tool, punching tool, punch, punching die, punching die, column frame -Punching tool: 2 columns Bodpfx Aemxpt Ssbbjlr -Stroke: 40mm -Stamp: without accessories, see photos -Dimensions: 245/240/H240 mm -Weight: 30 kg

Condition: used, Year of construction: 2003, CNC Tool Grinding Machine Schneeberger NORMA CFG Year of manufacture: 2003 Center height: 210 mm Table length: 950 mm Table width: 310 mm Travel X-axis: 380 mm Travel Y-axis: 280 mm Travel Z-axis: 280 mm Grinding wheel diameter: 50–200 mm A-axis grinding head rotation: 360° C-axis tool rotation: 340° C-axis spindle resolution: 0.001° Tool holder: HSK 50 Grinding spindle speed, stepless: 0–9000 rpm Hydraulic unit: 6 bar Connection: 3×400 V / 50 Hz Spindle power: 7.5 kW Total power requirement: 33 kVA Machine weight: approx. 5,500 kg Machine dimensions Length: 1,930 mm Width: 1,590 mm Height: 2,250 mm Control system: GE Fanuc Series 16-M Accessories: various grinding wheel mounts and tool holders Bsdoxz R T Uopfx Abbolr Max. operating current: 3×40 A No guarantee is given for the accuracy, completeness, or timeliness of the information.

Condition: excellent (used), Telescopic drawer cabinet Tool cabinet Kind make 2 drawers 70 mm high 3 drawers 220 mm high width 555 mm depth 730 mm height 1025 mm Weight 95 kg Bsdpjrwfnaofx Abbolr

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 3483425_32, total length: 1,050 mm, total width: 850 mm, total height: 1,240 mm, overall weight: 310 kg, number of drawers: 12, height adjustment type: mechanical, product height (max.): 3 mm, Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) Bedpsx Atp Ujfx Abbjlr , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece

Condition: reconditioned (used), Year of construction: 1987, Universal Tool Milling Machine Manufacturer: DECKEL Model: FP 2 Aktiv Year of manufacture: 1987 – overhauled, newly painted with new machine electrics RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2202-11579 Milling head type: 2271 Milling head no.: 300-3606 with warranty Geometric acceptance with inspection report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 - Fixed table 660 x 380 mm (T-slot: 12 mm) - Vertical milling head SK 40 with Bledpfx Asx A Eddsbbor drawbar thread S 20 x 2 - Central lubrication, hand-operated - Coolant system - Operating manual - used, as seen -

Condition: excellent (used), Year of construction: 1986, machine/vehicle number: 815, total height: 1,900 mm, total length: 1,400 mm, total width: 900 mm, spindle speed (max.): 10,000 rpm, spindle speed (min.): 2,000 rpm, overall weight: 600 kg, table length: 500 mm, table width: 200 mm, Equipment: rotational speed infinitely variable, TECHNICAL DETAILS: - Serial number: 815 - Operating voltage: 380 V - Frequency: 50–60 Hz - Rated current: 14 A - Table dimensions: 500 x 200 mm Bjdpfx Abewxrfpsbjlr WORKING RANGE & CAPACITY: - Universal dividing head center height: 170 mm - Tailstock center height: 120 mm (with intermediate support: 170 mm) - Max. workpiece length between centers: 336 mm - Workpiece diameter with unsupported mounting: approx. 600 mm - Max. center length: 950 mm - Internal taper of indexing spindle: Morse 4 / Unified 40 - T-slots: 12 mm (machine base), 8 mm (additional elements) TRAVEL & ADJUSTMENTS: - Sharpening stroke: 190 mm - Cross travel of tool holder: 100 mm - Vertical movement of grinding head: 325 mm - Tool holder: 230 mm - Indexing device on tool slide: 330 mm ROTATION / SWIVEL RANGES: - Grinding head mounting / tool holder / grinding head / universal headstock: 360° DRIVE & SPEEDS: - Three-phase motor: 0.7 / 0.85 kW - DC motor: 1.3 kW - Spindle speed: 4000 / 8000 rpm (dual speed) - Stepless DC: 2000 – 10000 rpm ACCESSORIES: - Includes two-axis digital readout - Extensive accessories set suitable for the machine

Condition: used, Year of construction: 1995, functionality: fully functional, Spindle taper: ISO 30 RPM.: 50-3750 (stepless). Travel: X750 Y305 Z400 mm. Table size: 1065 x 230 mm. Automatic feed: X & Y Rapid speed: X & Y. Digital readout: RSF Z251 (X & Y), Year: 1995 Country of origin: Taiwan. Blodpjx Ad Tksfx Abbjr Size (L x W x H): 1500 x 1500 x 2500 mm. Weight: 985 kg. With motorized movement of head up/down, pneumatic tool clamping, drilling function in head with automatic feed and digital readout of depth, spindle brake, machine vice and misc. tools. All our machines are tested and serviced before delivery.

Condition: good (used), 16 pieces tool holder external machining Blodpeikn E Hefx Abber 41 piece tool holder internal machining

Condition: ready for operation (used), Year of construction: 1982, feed length X-axis: 700 mm, feed length Y-axis: 490 mm, feed length Z-axis: 250 mm, Heidenhain Visue, 3 axes ISO 40 spindle Bledpfx Absxxmpmeber Table 1100x305 mm Travels 700x490x250 mm 7.5 HP Weight 2100 kg

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 34834_25_31, total length: 1,050 mm, total width: 850 mm, total height: 1,240 mm, overall weight: 310 kg, number of drawers: 12, height adjustment type: mechanical, product height (max.): 3 mm, Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: Blsdpfxox Atpns Abbjr - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece

Condition: used, Year of construction: 1990, Universal tool milling machine Make: MACMON Model: M 100 E Year of manufacture: 1990 – workshop tested Machine no.: 1252 Geometric acceptance with inspection protocol Accessories: Bedpfox Adbhsx Abbolr - 3-axis digital readout K+C Arbah-M, new - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Coolant system - Operating manual Used as seen, without warranty The machine's technical condition corresponds to the state of the art at the time of manufacture.

Condition: excellent (used), functionality: fully functional, VDI40 tool holders for external machining. The tool holders have been inspected and are in excellent, almost like-new condition, featuring high quality from various renowned manufacturers. The following prices apply for a minimum purchase of 4 units: Order No.: 435_C1 → Stock: 2 units; Price: €55.00/unit Order No.: 430_C2 → Stock: 3 units; Price: €54.00/unit Order No.: 432_B4 → Stock: 2 units; Price: €55.00/unit Order No.: 433_B4 → Stock: 2 units; Price: €56.00/unit Unit price for single items: €65.00 net B3 with right-hand rotation; B4 with left-hand rotation C1 with right-hand rotation; C2 with left-hand rotation ----- Short reverse VDI radial tool holder. Tool holders for mounting OD turning tools Bljdpfxowa Thbo Abbjr in standard orientation, i.e., with Hartmell indexable inserts facing upwards: C1 with right-hand rotation; C2 with left-hand rotation Shipping costs: on request ----- Dimensions: D = 83 mm d-2= 83/40 mm (45.52) H= 32.5 mm L1= 75 L2= 22 l-4= ----- Further VDI40 holders in our other offers. For example, VDI40 type E2 For drilling tools with cylindrical shank with internal and external coolant supply Surface hardened, blackened, and ground.

Condition: excellent (used), Tool milling machine Manufacturer: Mikron Model: WF 3 DP Three-axis Heidenhain digital readout Tool holder: SK 40 24 spindle speeds: 30 – 2240 rpm Bljdpexvr Trsfx Abbsr Infinitely variable feeds, from 1 – 750 mm/min Table clamping surface: 450 x 800 mm X travel: 500 mm Y travel: 500 mm Z travel (vertical): 400 mm Hydraulic tool clamping Space requirements: Width: 1800 mm Depth: 1700 mm Height: 2000 mm (with pallet) Weight: 1800 kg

Condition: excellent (used), Digital display Travel range X/Y/Z: 400 x 200 x 400 mm Table size 700 x 330 mm Tool holder ISO 40 Bedpfx Abswn Td Eobjlr Hydraulic vice Completely overhauled in 2019

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 34834_2025_25, total length: 1,050 mm, total width: 850 mm, total height: 1,240 mm, overall weight: 310 kg, number of drawers: 12, height adjustment type: mechanical, product height (max.): 3 mm, Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth Bedpfx Abox Atn Rebelr - Dimensions of the compartments in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece

Condition: used, Year of construction: 1990, Universal tool milling machine Make: MACMON Model: M 100 E Year of manufacture: 1990 – workshop tested Machine No.: 1479 Geometrical inspection with test protocol Accessories: - 3-axis digital readout K+C Arbah-M, new - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Coolant system - Operating manual Bedpfx Aox Ada Rebbolr Used as seen, without warranty The machine conforms technically to the state of the art at the year of manufacture.