Used Demag Ac 80 for sale (558)

Condition: ready for operation (used), Year of construction: 2004, operating hours: 91,810 h, clamping force: 2,500 kN, screw diameter: 60 mm, injection weight: 579 g, This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2500 kN and a locking force of 2750 kN. The machine includes a Wittmann linear robot and supports a maximum mold weight of 3300 kg. It's equipped with a screw diameter of 60 mm and offers a shot volume of 636 ccm. Consider the opportunity to buy this DEMAG ET250/630-840 Concept hydraulic injection moulding machine. Contact us for more information about this machine. • Locking force: 2750 kN • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions (H x V): 950 x 950 mm • Mold height: 330–830 mm • Opening stroke: 675 mm • Max daylight (distance between platens): 1505 mm • Mold weight capacity: fixed side 1100 kg, moving side 2200 kg (total 3300 kg) • Ejector: • Stroke: 200 mm • Force: 80 kN • Centering ring diameter: 200 mm • Pneumatic ejector: yes • Core pulls: 2 on moving side (AS) • Injection unit: • Unit size: 840 • L/D: 20 • Shot volume: 636 cm³ • Injection pressure: 1351 bar Ijdpfx Aaoyfq Aletjif • Plasticizing rate (PS): 74 g/s • Screw speed: 326 rpm • Nozzle radius: 15 mm; nozzle bore: 3 mm • Max dosing stroke: 225 mm • Note: Second injection unit listed with no data → single-component machine • Interfaces/controls: • Printer interface: yes • Process control/SPC: yes Additional equipment • Robot/handling: Wittmann W633-961 linear robot • Stroke: Y (vertical) 1600 mm, X 900 mm, Z 2500 mm • Hot runner control: 9 zones • Mold sensing: Kistler pressure (p=1) / temperature (t=0) system • Valve gate control: hydraulic (pneumatic not equipped)

Condition: like new (used), Year of construction: 2010, machine/vehicle number: 1099883, operating hours: 100 h, Demag end carriage pair End carriage DRS315 Hoist unit EZ DR20 Trolley gauge 2240 mm Reeving 4/1 The crane shows virtually no wear, very little use in a machine construction factory. Dismantled in July 25 and stored dry. Isdpfxew H S Avs Aateif Complete with documentation and HBC Spectrum radio remote control. All motions with frequency inverter! Modifications can be offered separately.

Year of construction: 1972, condition: used, functionality: fully functional, machine/vehicle number: TRFA12+14x, 1x Demag friction wheel drive travel drive for rope hoist crane hoist P-train bridge crane etc Stock from years of construction 1971 + 1976: 14x RF310 - motor type 16/6KF8-2 0,15-0,6KW 5m/25m/min price 2850.- / pc. Iiodpet Rtm Nofx Aatof 12x RF400 - motor type 19/11KF12-2/2 0,18-1,1KW 6,3m/40m/min Price 3650.- / pc. with 2 speeds Complete with tension clamps, motor/gearbox and friction wheel We can also overhaul defective, porous friction wheels for you and have new ones made - please enquire. Weight complete approx. 100-150 kg, connection to 380V 50Hz Used condition Item location is 75053 Gondelsheim See pictures

Condition: excellent (used), functionality: fully functional, Year of construction: 1983, machine/vehicle number: MBR 1000Kg, Demag ELKE overhead crane, bridge crane, industrial crane Crane available in duplicate!!! Year of manufacture 1983 + 1985 Load capacity / lifting capacity 1 ton - 1000 kg Gauge 6700 mm, overall dimensions approx. 6800 mm With floor control and fine positioning Demag PLV82NF wire rope hoist 1000 kg Lifting height 4.5 m Isdpfszffmdjx Aatsif Overall height from top of crane to hook approx. 650 mm Head beam length with buffer approx. 140 cm Crane is dismantled and immediately available Good used condition Column-mounted swivel cranes and wall-mounted swivel cranes are also available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder is possible, please inquire with your postal code. Collection preferred.

Condition: excellent (used), Crane block, crane hook, load hook, single hook, lower block, rope pulley cover, rope sheave cover set -Manufacturer: Demag, Rope pulley cover set, rope roller cover set, unused, original packaging -Type:280 2/1 -Item No.: 47926133 -Lid: Ø 350 mm -Quantity: 1 set available -Transport dimensions: 460/460/H120 mm -Weight: 5.8 kg Iisdpfx Ajzhtawoatjf

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: ZBA112 A4 / A70D, power: 4 kW (5.44 HP), rotational speed (max.): 1,440 rpm, Demag motor ZBA112 A-4 Gearbox A70D H-1-44.1) 4 units in stock Condition: Used, in very good condition. ED=100% 4.0 kW 1440 rpm Brake 47.0 Nm B140 400V 50Hz Iiodsywi Edepfx Aatjf Price on request

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: WIL134, Demag EPKE Overhead Crane Gantry Crane Bridge Crane incl. Steel Structure + Pendant Control Iiedpfx Asw Ixz Ueatof Steel Structure Dimensions approx.: Length 44m x Width 11.2m, with 1x bridge crane 2,500kg Lifting height 6m, lifting speed 0.8/4.5m/min, reeving 4/1 Payload/Lifting Capacity: 2.5t - 2,500kg Technical Data of the System: Crane runway/steel construction consisting of HEA/HEB180/240 beams, running rails HEB280 Length outer edge steel structure: approx. 44m Total width outer edge (steel structure): approx. 11.2m Overall crane height: approx. 5.2m Top of rail: approx. 4.87m Bottom of rail: approx. 4.59m Top of bridge: approx. 4.52m Bottom of bridge: approx. 4.83m Hook height: approx. 4.3m Crane gauge: approx. 10.8m Column spacing: to be advised Some columns are partially set in concrete; these will be cut 5cm below the top edge of the floor! System is supplied complete: Steel structure fully assembled incl. conductor rail 1x bridge incl. travel drives and hoist Demag DR 2.5t NL Crane is dismantled and immediately available. The item is located at 75053 Gondelsheim Very good condition, see pictures Shipping by freight carrier or self-collection by appointment only.

Condition: excellent (used), functionality: fully functional, Year of construction: 1990, machine/vehicle number: CR2431 90-240381, Demag ELKE bridge crane, overhead crane, crane, crane gantry, crane runway Load capacity / lever load: 3.2 - 3200 kg Gauge: approx. 12,200 m, overall width: approx. 12,400 mm with floor control and fine positioning Demag DH hoist 3200 kg Lifting height: 6 m Overall height from top of crane to hook: approx. 1050 mm Head beam length with buffer: approx. 220 cm Crane is disassembled and immediately available. Good used condition. Iiodezf Upbopfx Aatef Column-mounted swivel cranes and wall-mounted swivel cranes are also available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping by freight forwarder is possible, please inquire with your postal code. Collection preferred.

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: BN2222, Demag chain hoist crane lifting mechanism 3200 kg DC-Pro 16-3200 H8 V4/1 Load capacity 3200 kg / 3.2 t, lifting capacity – 2-strand with trolley drive (beam width approx. 25-33 cm) with 2 lifting speeds, lifting height approx. 8 m!!! incl. control valve block Total weight approx. 160 kg, connection to 400 V 50 Hz Very good condition, hardly used Item location is 75053 Gondelsheim Isdpfx Aszhtfmjateif See pictures

Condition: used, Year of construction: 2001, operating hours: 58,764 h, functionality: fully functional, machine/vehicle number: 502748, clamping force: 1,000 kN, screw diameter: 30 mm, clearance between the columns: 420 mm, displacement volume: 144 cm³, injection pressure: 1.905 bar, ejector force: 41 N, ejector stroke: 150 mm, opening stroke: 500 mm, plate length: 590 mm, plate width: 590 mm, installation height: 250 mm, total length: 4,550 mm, total width: 1,450 mm, total height: 2,000 mm, overall weight: 4,800 kg, heating capacity: 9 kW (12.24 HP), pump power: 30,000 W, height adjustment type: hydraulic, stroke length: 150 mm, tool height: 250 mm, tool weight: 700,000 g, Equipment: documentation/manual, Demag ERGOtech Injection Moulding Machine ERGOtech 100-420-200 NC4 Year of manufacture: 2001 Asking price: €8,000.00 – WITHOUT Wittmann peripheral equipment The injection moulding machine is in good condition and ready for operation. For sale is the ERGOtech 100-420-200 NC4 injection moulding machine. Optionally, all corresponding Wittmann peripheral devices can be included at an additional charge. Iijdotltvzepfx Aatof We purchased the Demag ERGOtech in 2020 during our company expansion to fulfill a customer order and equipped it with matching Wittmann peripheral devices. The machine has been serviced on-site by a DEMAG service technician and is free from defects. OPTIONAL: We also offer for sale all associated Wittmann peripheral equipment: Peripheral Equipment from WITTMANN BATTENFELD Deutschland GmbH: Wittmann Tempro Plus D160 – Dual-circuit temperature control unit TEMPRO-PLUS-D-Standard-2-160 DEMONSTRATION UNIT – used, no defects Equipped with: 2 pcs. Reinforced pump TemproPlus D160-1.0kW (2.4A) 60l 1 pc. Ultrasonic flow measurement 140-180° 1 pc. Digital interface 20mA 1 pc. Packaging for temperature control unit Original price: €6,980.00 Sale price: €3,490.00 Wittmann Compact Chiller Coolmax C30 WITTMANN WATER CHILLER SERIES: COOLMAX C30 DEMONSTRATION UNIT – used, no defects Original price: €4,750.00 Sale price: €2,375.00 WITTMANN BATTENFELD Deutschland GmbH Drying and dosing accessories - 1 pc. DRYMAX-PRIMUS: E30-70-M for drying plastic granules - 2 pcs. FEEDMAX-S:3NET for conveying free-flowing plastic granules, hinged lid with integrated collector motor - 1 pc. HOPPER: MT203 machine hopper 203 for mounting a series 200 separator - 1 pc. DOSIMAX: MC 18 dosing unit for free-flowing granulate Condition – NEW – Unused Original price: €8,467.00 Sale price: €4,233.50 All prices are exclusive of the statutory 19% VAT. PLEASE NOTE: The offer does not include relocation or transportation costs for the machine. These services can be offered and organised separately upon request. For further questions, please feel free to contact me at any time.

Condition: excellent (used), For sale: a Mannesmann Demag geared motor with an angular gearbox, fully functional and ready for operation. The unit has been inspected and is in good technical condition. Normal signs of wear and tear resulting from use are visible. Technical data: Manufacturer: Mannesmann Demag Motor type: UMF71BX-6-7 Iiodpszn Aamsfx Aatef Gearbox type: S040-B5-21-3 Motor power: 0.25 kW Power supply: 3×220/380 V Frequency: 50 Hz Motor speed: 890 rpm Output speed: 64 rpm Gear ratio: i = 14:1 Protection rating: IP54 Insulation class: B

Condition: used, Year of construction: 2018, functionality: fully functional, power: 5.7 kW (7.75 HP), rotational speed (max.): 1,415 rpm, Demag motor/gearbox KBA125 B-4 / AF18 i = 181 ED = 100% 5.7 kW 1415 rpm Motor condition: Refurbished Price on request Isdpsywkwzofx Aatoif

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, lifting height: 10,000 mm, load capacity: 8,000 kg, lifting speed: 6,000 mm/s, fine lifting speed: 1,000 mm/s, input voltage: 400 V, Equipment: documentation/manual, Demag Hoist – Suitable for double-girder cranes – Capacity: 8 tons – Lifting height: 10 m – Year of manufacture: 2019 Iiedpfx Aaoy Rhhkotef – Type: Demag F-DMR-10-8-H20/10-4/1-Z-V1/6-400/50-CC A1 – Trolley track width: 1,400 mm – FEM/ISO class: 3m / M6 – Hoist type: wire rope hoist – Rope configuration: 4/1 Speeds – Hoisting: 6/1 m/min (2 speeds) – Trolley travel: 25/6.3 m/min Features – Crane manual available: yes – Condition: in good condition Including Demag Wheel Sets – Length: 2,900 mm (excluding buffers) – Height: 300 mm – Suitable for 50×30 mm crane rail Features – Equipped with crane travel motors: ZBF 100 A8/2 B050

Condition: used, Year of construction: 2003, Operating hours: 61303927 Clamping force: approx. 200 t Number of components: 1 Horizontal screw diameter: approx. 45 mm Core pull: 2 Hot runner zones: 0 Flow rate: approx. 206 l/min Frequency: 50 Hz Power supply: 3 × 400 V Pressure: approx. 190 bar Isdpfx Ajzl S Hdsateif Current 1: 189 A Current 2: 152 A Current 3: 37 A Weight: approx. 10.1 t

Condition: used, functionality: limited functionality, gearing type: hydrostat, fuel type: diesel, color: yellow, overall weight: 20,000 kg, number of seats: 1, first registration: 01/1992, Year of construction: 1992, machine/vehicle number: 20412, Equipment: additional headlights, cabin, parking heater, We offer this used Mannesmann Demag V 73 mobile crane, year of manufacture 1992. Type: V 73 Chassis number: 20 412 Year of first commissioning: 1992 Permissible total weight: 20,000 kg Permissible front axle load: 10,000 kg Iiodpfx Ajyi D Ddoatof Maximum lifting capacity: 14 t Maximum outreach: 13 m Last inspection: 2023 The load moment limiter is not operational. If you have any questions or require further information, please feel free to send us a message.

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, lifting height: 6,000 mm, load capacity: 3,200 kg, DEMAG EKDR 3 complete trolley with hoist and travel motor, including all cables / festoon cable trolley / power supply lead / control switch (see last photo) Year of manufacture: 2007, Reeving 4/1, Gear ratio i=67, Load capacity 3200 kg, Lifting speed 6 m/min and 1 m/min Very good condition Many trolleys in stock, also available in other sizes Isdpfxjyyu S Ue Aatsif

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, DEMAG System 1500/1500-16000 Injection Moulding Machine Year of manufacture: 2008 Iedpfxjww Idlo Aatjif We offer for sale a high-quality injection moulding machine from the German brand Demag, model System 1500/1500-16000, equipped with a robot and additional equipment. The machine is in very good technical condition, regularly serviced, complete, and ready for operation. TECHNICAL DATA Clamping unit: Clamping force: 15,000 kN Mounting platen dimensions (W x H): 2,150 x 1,880 mm Clearance between tie-bars (W x H): 1,500 x 1,250 mm Minimum / maximum mould height: 700 – 1,400 mm Maximum opening stroke: 2,900 mm Injection unit: Screw diameter: 145 mm Injection volume: 10,981 cm³ Shot weight (for PS): 9,880 g Injection pressure: 1,454 bar Electrical-hydraulic system: Hydraulic motor power: 165 kW Heater power: 97 kW Dimensions and weight: Machine weight with control cabinet: 74,000 kg / 21,000 kg Overall dimensions (L x W x H): 14.4 m x 3.4 m x 2.9 m Additional equipment: Wittmann W 753 robot – year of manufacture: 2008 Safety enclosure Conveyor belt (product conveying) The machine is ideal for processing large technical mouldings. Perfect for serial production, with the possibility of full automation thanks to the installed robot and part removal system.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 8,000 h, clamping force: 500 kN, screw diameter: 25 mm, injection weight: 46 g, total height: 1,779 mm, overall weight: 4,200 kg, This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct-drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Includes a granule dryer, industrial robot, conveyor belt, and temperature units. Ideal for high-quality injection moulding processes. Contact us for more information about this machine. Additional equipment Iisdpfx Aaox D Eccotsf • Granule Dryer • Handling System • Conveyor Belt - 1400 mm x 400 mm • Precision Scale • Temperature Units - 2x HB‑Therm Machine Benefits Technical Machine Benefits • Exceptional energy efficiency • Enhanced platen rigidity and mold safety • Fully electric direct-drive system • Ultra-precise direct-drive motors with 0. 1 ms response time • Displacement: 52 cm³ • Spray pressure: 2180 bar • Tool clamping platens: 520 x 570 mm Extra Information Control Unit Advanced control system with NC5+ Automatic mold height and clamping force adjustment Energy-saving routines Dimensions Machine Depth 4308 mm

Condition: excellent (used), DEMAG / ABUS / STAHL / LIFTKET - travelling trolleys / push trolleys / running wheels / rollers - 24 pieces: 1. Demag Type: U/EU 22 DC - 2200 kg (2 pcs). 2. Stahl - 1000 kg. 3. Abus Type: EF14 - 1400 kg. 4. Liftket Type: HFW500 - 500 kg. Iodpfx Aaoy D Tvystoif 5. Trolley, 2 pcs. 6. Trolley - 5000 kg. 7. Demag - 1350 kg. 8. Abus - 580 kg. 9. Demag Type: EU-RU 5 PK - 1100 kg. 10. Demag Type: EU/RU 22 DK - 2600 kg. 11. Trolley, 3 pcs - 1100 kg. 12. Hadef roller - 2000 kg. 13. Running wheels / rollers - 7 pcs.

Condition: used, total height: 1,000 mm, total length: 11,500 mm, total width: 2,450 mm, - Documentation available: No - CE certificate present: No - Lifting capacity [kg]: 5000 Iiedpfozmd T Eox Aatsf - Lifting height [mm]: 5500 - Span [mm]: 11300 - Girder: Single - Crane control: Fixed cable - Dismantled: Yes - Transport dimensions: 11500mm x 2450mm x 1000mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, overall weight: 11,800 kg, total length: 16,700 mm, load capacity: 10,000 kg, working height: 11,350 mm, lifting height: 11,350 mm, Equipment: documentation/manual, Demag overhead crane – Type: double-girder – Capacity: 2x 5,000 kg – Lifting height: 11.35 m – Year of manufacture: 2021 – Hoist type: wire rope hoists – FEM/ISO hoists: 2m / M5 – Manufacturer: Demag / Siempelkamp Dimensions – Span: 16,700 mm (center-to-center) – Total length: 17,000 mm – Installation height: 1,600 mm – Width: 3,860 mm – Wheelbase: 3,150 mm – Suitable for crane rail: A55 / 50 x 30 mm – Net weight: 11,800 kg Speeds – Hoisting: 8/1.3 m/min – Trolley travel: 20/5 m/min – Crane travel: 40/10 m/min Features – Control: radio control – Crane manual available: yes – Electrical diagrams available: yes – Condition: in very good condition. – Disassembled: yes, available immediately Iedpfxeyvr Hus Aatsif – Special features: 8.5 ton Equator with carousel available as option

Condition: excellent (used), Year of construction: 2010, Column jib crane, overhead crane, workstation crane -Manufacturer: Demag, Column jib crane type D-MS360, lifting capacity 3200 kg -Base plate: Ø 810 mm Isdszpaq Ejpfx Aatoif -Load capacity: 3200 kg -Chain hoist: Demag type 2M EKDR 3, year of manufacture 2010 -2x lifting speed: 6.0/1.0 m/min -Drive system: yes -Swivel drive: yes -Projection: 4480 mm -Total height: 5060 mm -Hook height: 5040 mm -Swivel range: 360° -Transport dimensions: 1200/5500/H2260 mm -Empty weight: 1850 kg

Year of construction: 2019, operating hours: 17,716 h, condition: ready for operation (used), General Data Measurements width 1920 cm Measurements depth 7750 cm Ijdjx D Nx Ijpfx Aateif Machine weight 26210 kg Measurements height 2410 mm This SUMITOMO SHI DEMAG El-Exis SP 350/820-920 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 40 mm and a clamping force of 3,500 kN. It has operated for 17,716 hours with 12,440,761 cycles, ensuring extensive production capabilities. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis SP 350/820-920 electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, load capacity: 1,000 kg, lifting height: 5,000 mm, Electric chain hoist DEMAG DKUN10-1000 K V1 Load capacity 1000 kg, 2/1 Hook travel 5 m Year of manufacture 2006 Without control unit, otherwise complete Very good condition Various electric chain hoists in stock Good condition Iisdpfx Asv Uvn Ioatjf Info: 20,000 DEMAG spare parts and components in stock! Demag parts warehouse

Condition: used, Year of construction: 2001, Operating hours: 193589 Clamping force: approx. 250 t Number of components: 1 Tie bar distance: approx. 840 × 840 mm Horizontal screw diameter: approx. 45 mm Core pull: 2 Hot runner zones: 0 Flow rate: approx. 206 l/min Frequency: 50 Hz Power supply: 3 × 400 V Pressure: approx. 190 bar Isdjzlg N Hspfx Aatoif Current 1: 139 A Current 2: 102 A Current 3: 37 A Current 4: 67 A Weight: approx. 10.7 t