Used Demag Ac 30 City for sale (502)

Condition: excellent (used), Year of construction: 2007, clamping force: 1,500 kN, screw diameter: 45 mm, displacement volume: 305 cm³, injection pressure: 2,050 bar, injection weight: 270 g, mold height (min.): 275 mm, Demag IntElect 150/520-610 General Information Year of manufacture: 2007 Kodpfexxrr Tjx Ag Uedg Weight: 6,900 kg Dimensions (L × W × H): 5.5 × 1.5 × 2.1 (2.3) m Control system: NC4 Operating hours: 26,500 h Clamping Unit Clamping system: 150/... Clamping force: 150 t Platen dimensions (H × V): 770 × 770 mm Tie bar clearance (H × V): 520 × 520 mm Mould height (min.–max.): 275 mm (max. increased) Max. distance between platens: 1180 mm Ejector stroke: 125 mm Ejector force: 35 kN Injection Unit Injection unit type: …/610 Screw diameter: 45 mm L/D ratio: 20 Injection volume: 305 cm³ Shot weight: 270 g Specific injection pressure: 2050 bar Wear-resistant screw; bimetallic barrel, standard L:D Three-piece ring-type non-return valve (RSP) Increased injection speed: 300 mm/s Additional Equipment Hour counter reading: 26,500 h - Increased mould mounting height (min. unchanged, max. extended) - Wear-resistant screw; bimetallic barrel; standard L:D; screw diameter 45 mm - Three-piece ring-type non-return valve (RSP) - Electro-hydraulic interface for connecting 2 hydraulic cores on the moving mould plate, via a separate hydraulic unit - Increased injection speed (300 mm/s) - Increased mould mounting height (min. unchanged, max. extended) Offer for the injection moulding machine only

Condition: excellent (used), Year of construction: 2015, Demag Systec 100/420-310 (2015) Panel: NC5 Kdedpox Tdwysfx Ag Uog Clamping force: 100 t Screw diameter: 30 mm Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Type: Horizontal Drive: Hydraulic Possible to buy Wittmann W818 Linear robot Z= 1500mm

Condition: excellent (used), Year of construction: 2015, clamping force: 1,000 kN, Clamping force: 100 t Screw diameter: 30 mm Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Type: Horizontal Drive: Hydraulic extra equipment: Ksdpex Tdp Nofx Ag Uodg 1. 2 hydraulic core pull circuits on moving platen (proportional valves) 2. Additional connections for 2 core pulls on fixed platen 3. Pneumatic core pull (2 circuits) on moving platen 4. 4-zone cooling water flow controller with temperature display 5. Compressed air blow valves on fixed and moving platens (programmable) 6. Integrated hot runner control, 8 zones 7. Interfaces for external nozzle heating bands 8. Interface for integrated temperature control units (up to 6 circuits) 9. Interface for mould temperature monitoring (2 circuits) 10. EUROMAP 67 for automation equipment

Condition: good (used), Features: Used roller conveyor transfer unit from the manufacturer Mannesmann Demag. feet to be ordered separately Condition: Fully functional with traces of use Ideal for fast material transport Professionally disassembled and packed 5 pieces in stock Price per piece Transfer unit Transfer units with chains or belts gently lift the material to be conveyed and gently set it down on the target line. For this purpose, both lines must stop briefly during pick-up and set-down. Technical data: Mass of the roller conveyor total length: 935mm Total width: 920mm Details of the roller clamping length: 430mm Approx. diameter: 50mm Material: steel, galvanized Frame data Height frame: 135mm Width frame: 30mm Material: steel Customized solutions for your intralogistics Kodedtdt Hspfx Ag Uedg For roller conveyors, belt conveyors, scraper conveyors or telescopes for loading and unloading your goods, we are your competent partner! We would be pleased to make you an individual offer or to advise you on conception or assembly questions. Just let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of specialists. For companies in a wide range of industries, such as: Logistics, pharmaceutical industry, trade or the electronics industry we have already successfully realized projects. Together we will work out ways to optimize your process and material flow in a cost effective and sustainable way. We can even offer you fully automatic sorting technology or supplementary components such as picking racks or containers.

Year of construction: 2005, condition: used, machine/vehicle number: SB205+206, Demag / Erikkila crane canopy Crane runway dimensions approx. 13x7m Payload / lifting capacity 2x 500 KG - 2x 0,5to Technical data of the system: Crane runway made of 200mm Erikkila rails Running rails 13m, 2x bridges 7m System is supplied complete: Rails, rail joiners, trolleys, end plates, cable drag, brackets/hangers etc. incl. 2x Demag 500KG PK chain hoist, lifting height approx. 3.5m Crane is disassembled and immediately available Used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Kdjdpfx Agorwi Dzs Uog Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.

Year of construction: 2010, condition: excellent (used), machine/vehicle number: RESHGFW, DEMAG KBK crane canopy crane runway - various cranes with different dimensions in stock - please inquire ! Payload / lifting capacity 125KG - 1000Kg - please ask Technical data of the system: Crane runway made from Demag KBK2/KBK2-L rails with raised trolley - crane girder is between the two runways for maximum lifting height System is supplied complete: KBK rails, rail joiners, trolleys, end plates, cable towing, brackets/hangers etc. incl. chain hoist Crane is dismantled and immediately available Various cranes are available, pictures are for illustration purposes only Very good condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Kedperwi Slefx Ag Usdg Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.

Year of construction: 1978, condition: used, machine/vehicle number: NBGMAN 3, Technical data: Kdeder Igtyopfx Ag Uog 1 Abus VS column slewing crane NL 1000 KG Payload at full radius 1000 KG / 1 ton payload Height: approx. 3.65m, UK boom: approx. 3.27m Projection: approx. 5m, hook height: approx. 2.75m Weight completely approx. 1000 kg including 1000KG Abus GM chain hoist (BJ2008) with floor control (2 lifting speeds) Connection to 400V 16A, swivel range 360° Test book is available Crane is dismantled and available immediately Item location is 75053 Gondelsheim Only the crane system shown in the pictures is sold Very good condition, see pictures Shipping by courier or collection by appointment

Year of construction: 2010, condition: like new (used), machine/vehicle number: MBUT134WSK, Technical data: 1x Demag KBK 1 wall slewing crane NL 125KG with chain hoist Payload at full radius 125KG / 0.125ton payload Projection: approx. 2m Weight completely approx. 150kg with steel chain hoist 125Kg chain hoist including bolts, cable drag, chassis, end cap etc. ----- ----- Alternatively, 3m cranes with 125 or 250kg payload are also available Swivel range 300°, connection to 400V 16A Crane is dismantled and available immediately Kjdpfx Agjpwgr Hs Usdg Item location is 75053 Gondelsheim There are other cranes available, load capacity 80-5000 kg, please inquire See pictures (example photo) Shipping by courier or collection only by appointment

Year of construction: 2006, condition: excellent (used), machine/vehicle number: W144, Technical data: 1 Demag KBK column slewing crane NL 50 KG Payload at full radius 50 KG payload Height: approx. 3.8m, UK boom: approx. 3.3m Projection: approx. 5m, hook height: approx. 2.95 m Weight completely approx. 300KG with 125Kg steel ST chain hoist with floor control (2 lifting speeds) Connection to 400V 16A, swivel range 270° Crane is dismantled and packed on a pallet Test book is available Very good condition, see pictures Item location is 75053 Gondelsheim Kjdpfsp Artdex Ag Uedg Only the crane system shown in the pictures is sold Shipping by courier or collection by appointment

Year of construction: 2017, condition: excellent (used), machine/vehicle number: K118, Demag / Cranetool Stahlbau Gantry Crane Crane Sky Crane Runway Dimensions approx. 20.3 x 5.2/7.55m with bridge crane Width with 2 protruding posts + 150 + 80cm Payload/lifting capacity 2500 KG Technical data of the system: Crane track/steel construction consisting of HEA240 HEB220/260 HEM240 - beam Upper bridge 6.45m UK bridge 6.1m Top rails 6.06m UK rails 5.84m Hook height 5.45m Track width 4.96 m Total width outer edge 5.2m / 7.55m Inner edge of steel construction 4.96m Kdedpemkfuljfx Ag Ueg Base plate steel construction 43x35 + 60x60cm Support spacing 9.5+10m The system is delivered complete: Steel construction with power supply 1 bridge with 2500 kg Demag DC-Com chain hoist BJ 2017 !!! Documents are available, more pictures on request. Crane is dismantled and available immediately The location of the article is 75053 Gondelsheim Very good condition, see pictures Dispatch by forwarding agent or pick-up only by appointment

Year of construction: 2004, condition: reconditioned (used), Brand: DEMAG Type: DH1063 H24 4/1 FG10 Year of construction: 2004 Load-capacity appr.: 25.000 kg Hook-Path appr.: 12.000 mm Load-classification: FEM/ISO 1Bm/M3 Working-speeds: Hoist appr. 6,3/0,6 m/min Certification of the remaining useful life of appr. 80% by an inspection expert. Equipped with: Kjdpfxsgiyf Aj Ag Uodg - Rope - Fine stroke FG10

Year of construction: 2000, condition: reconditioned (used), Manufacturer: Demag Type: DH520 H20 4/1 F10 Year of manufacture: 2000 lifting capacity appr.: 8.000 kg Kedpfx Agjkqm Aio Ujdg hook path appr.: 10,000 mm trolley track appr.: 1,400 mm Reeving: 4/1 Thruster group: FEM/ISO 2m/M5 Working speeds: hoist appr. 0.8/8.0 m/min trolley appr. 5.0/20.0 m/min Certification of the remaining service life of appr. 80% by an inspection expert Equipped with: - Mechanical fine lift F10 - Rope and bottom block 4/1 - trolley

Year of construction: 2016, condition: excellent (used), Span current/extendable approx. 8,0/12,0 m Lifting height current/extendable approx. 10,0/changeable m Make/Reconstruction DEMAG/TEICHMANN Year of construction/Operating time only approx. 2016/2 Jahre Kedpeqcu T Uofx Ag Usdg Stress group H2 B3 Crane equipped with: - DEMAG monorail trolley, short design in M5 - Radio remote control - Trolleys optionally available with wheel flange guide on flat iron rail or barrier free steel plate slat

Condition: ready for operation (used), Year of construction: 2019, operating hours: 19,884 h, General Data Machine weight 27000 kg Kdsdpfx Agsx H U Ehj Ujg Measurements height 278 mm Dimensions Machine Length 890 mm Injection Unit Screw diameter 60 mm Clamping Unit Clamping force 3500 kN This DEMAG El-Exis SP 350/820-2500 was manufactured in 2019. A robust electrical injection moulding machine, it features a screw diameter of 60 mm, a clamping force of 3500 KN, and a tie bar distance of 820 mm. With dimensions of 8.90 x 2.21 x 2.78 meters and a weight of 27,000 kg, consider the opportunity to buy this DEMAG El-Exis SP 350/820-2500 electrical injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, Demag slewing crane Jib length: 5000 mm Height: 3300 mm Kdedpfox Rn T Hsx Ag Uog Load capacity: 500 kg TÜV: until 2026

Condition: used, Year of construction: 2001, operating hours: 58,764 h, functionality: fully functional, machine/vehicle number: 502748, clamping force: 1,000 kN, screw diameter: 30 mm, clearance between the columns: 420 mm, displacement volume: 144 cm³, injection pressure: 1.905 bar, ejector force: 41 N, ejector stroke: 150 mm, opening stroke: 500 mm, plate length: 590 mm, plate width: 590 mm, installation height: 250 mm, total length: 4,550 mm, total width: 1,450 mm, total height: 2,000 mm, overall weight: 4,800 kg, heating capacity: 9 kW (12.24 HP), pump power: 30,000 W, height adjustment type: hydraulic, stroke length: 150 mm, tool height: 250 mm, tool weight: 700,000 g, Equipment: documentation/manual, Demag ERGOtech Injection Moulding Machine ERGOtech 100-420-200 NC4 Year of manufacture: 2001 Asking price: €8,000.00 – WITHOUT Wittmann peripheral equipment The injection moulding machine is in good condition and ready for operation. For sale is the ERGOtech 100-420-200 NC4 injection moulding machine. Optionally, all corresponding Wittmann peripheral devices can be included at an additional charge. We purchased the Demag ERGOtech in 2020 during our company expansion to fulfill a customer order and equipped it with matching Wittmann peripheral devices. The machine has been serviced on-site by a DEMAG service technician and is free from defects. OPTIONAL: We also offer for sale all associated Wittmann peripheral equipment: Peripheral Equipment from WITTMANN BATTENFELD Deutschland GmbH: Wittmann Tempro Plus D160 – Dual-circuit temperature control unit TEMPRO-PLUS-D-Standard-2-160 DEMONSTRATION UNIT – used, no defects Equipped with: 2 pcs. Reinforced pump TemproPlus D160-1.0kW (2.4A) 60l 1 pc. Ultrasonic flow measurement 140-180° 1 pc. Digital interface 20mA 1 pc. Packaging for temperature control unit Original price: €6,980.00 Sale price: €3,490.00 Wittmann Compact Chiller Coolmax C30 WITTMANN WATER CHILLER SERIES: COOLMAX C30 DEMONSTRATION UNIT – used, no defects Original price: €4,750.00 Sale price: €2,375.00 WITTMANN BATTENFELD Deutschland GmbH Drying and dosing accessories - 1 pc. DRYMAX-PRIMUS: E30-70-M for drying plastic granules - 2 pcs. FEEDMAX-S:3NET for conveying free-flowing plastic granules, hinged lid with integrated collector motor Ksdpstltvzjfx Ag Uodg - 1 pc. HOPPER: MT203 machine hopper 203 for mounting a series 200 separator - 1 pc. DOSIMAX: MC 18 dosing unit for free-flowing granulate Condition – NEW – Unused Original price: €8,467.00 Sale price: €4,233.50 All prices are exclusive of the statutory 19% VAT. PLEASE NOTE: The offer does not include relocation or transportation costs for the machine. These services can be offered and organised separately upon request. For further questions, please feel free to contact me at any time.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 15,642 h, General Data Measurements width 1810 mm Measurements depth 6950 mm Measurements height 2213 mm Machine weight 15750 kg Kdsdpox D Hntjfx Ag Ujg Injection Unit Screw diameter 45 mm Clamping Unit Clamping force 350 ton Media Internal cooling Yes Additional Equipment Fanuc Robot This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2013, operating hours: 27,551 h, General Data Measurements width 1260 mm Measurements depth 6460 mm Measurements height 2100 mm Kdsdpfx Agex D Hnyo Ueg Clamping Unit Clamping force 2200 kN Additional Equipment Sepro Robot SDR 22 This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. It's an electrical injection moulding machine known for its precision and efficiency. Ideal for those looking to enhance their production capabilities with reliable technology. Contact us for more information. Application Types Injection Moulding

Year of construction: 2019, operating hours: 17,716 h, condition: ready for operation (used), General Data Measurements width 1920 cm Measurements depth 7750 cm Machine weight 26210 kg Measurements height 2410 mm Kdsdpfx Agjx D Nx Ij Uog This SUMITOMO SHI DEMAG El-Exis SP 350/820-920 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 40 mm and a clamping force of 3,500 kN. It has operated for 17,716 hours with 12,440,761 cycles, ensuring extensive production capabilities. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis SP 350/820-920 electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2020, operating hours: 8,000 h, General Data Measurements width 1264 mm Measurements depth 4308 mm Measurements height 1779 mm Machine weight 4200 kg Injection Unit Screw diameter 25 mm Shot weight 46 g Heating capacity 5.7 kW Kdjdpfxjx D Eccj Ag Uog Nozzle pressure 30 kN Clamping Unit Clamping force 500 kN Max open daylight 710 mm Distance between bars 370 x 370 mm Mould height min 200 mm Mould height max 410 mm Ejector stroke 90 mm Ejector force for / back 25 kN Additional Equipment Granule Dryer Handling System Conveyor Belt - 1400 mm x 400 mm Precision Scale Temperature Units - 2x HB‑Therm This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct-drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Includes a granule dryer, industrial robot, conveyor belt, and temperature units. Ideal for high-quality injection moulding processes. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2013, operating hours: 17,577 h, General Data Measurements width 1460 mm Measurements depth 5370 mm Measurements height 2060 mm Clamping Unit Kdedpfxjx D Hnmo Ag Ujg Clamping force 1600 kN Additional Equipment Sepro Robot SDR 11 This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. It's an electrical injection moulding machine known for its precision and efficiency. Ideal for those looking to enhance their production capabilities with reliable technology. Contact us for more information. Application Types Injection Moulding

Year of construction: 2019, condition: ready for operation (used), This DEMAG Systec 210/580-840 was manufactured in 2019. It's a hydraulic injection moulding machine with a clamping force of 210 tons and a power output of 60 kW. It has been used for 31,132 operating hours. Consider the opportunity to buy this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Contact us for more information. Application Types Kdedpfxsx D Nlue Ag Ujg Injection Moulding

Year of construction: 2019, operating hours: 18,138 h, condition: ready for operation (used), General Data Measurements width 1920 cm Measurements depth 7750 cm Measurements height 2410 cm Machine weight 25340 kg Kdjdpfjx D Nxzox Ag Usg This SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 50 mm, clamping force of 3,500 kN, and tiebar spacing of 820 mm. It has operated for 18,138 hours with 12,875,090 cycles. If you are looking to get high quality moulding capabilities consider the SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 machine we have for tact us for more information. Application Types Injection Moulding

Condition: good (used), Year of construction: 1999, Demag Ergotech systems 500/200 Closing 50 TO Year 1999 Scrow 30 mm Spraying weight approx 90 Ksdpfeg Emvtjx Ag Ujdg distance between tie bars 35,5x35,5

Year of construction: 1999, condition: excellent (used), Injection cylinder for rubber Kdjdpfx Agexuvgtj Uog Demag-Desna Year of manufacture approx. 1999