Used Cut Off Saw for sale (18,417)

Condition: excellent (used), Double miter saw Pertici Haffner DGS180 Cutting length: 3300 mm Ihedpfjxg Hanex Ag Uet Cutting width: 140 mm Two adjustable cutting angles Maximum saw blade diameter: 330 mm Pneumatic material clamps 3 operating modes

Condition: new, Year of construction: 2024, Cutting capacity: 55x360, 80x340, 95x325, 125x295, 135x280 mm Minimum work piece thickness mm.10 Working table tilted 8° Cutting unit technical features: Pneumatic upstroke saw TR500 Motor power 10 HP (7,5 kW), Volt 400/50 Hz. TCT Blade dia.500 mm., F=30 Z=144 S=4,6 Cutting cycle speed: 4 seconds Push feed system technical features: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feeding by rack and pinion system and brushless motor Positioning precision +/- 0,4 mm Strong infeed motor for a packet weight of 80 kgs Maximum push feed system speed 90 m/min Pneumatic rising of the pusher at the end of the cutting cycle and overhead returning. Data entry management: 12 inch TOUCH-SCREEN Controller (800x600 pixel) USB Port Ethernet Port LINUX Operating system Loading and save machine parameters via USB Port Cutting cycle (pattern) editing and entered directly on the controller Transfer of cutting lists created by PC via USB or Ethernet Port Working software: Manual input of loading board length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (Maximum length, Sequence and Board sequence) N°1000 cutting lists made up of 11 sizes or one list of 10000 sizes in sequence Package "OPTI": automatic board length detection and full optimization. Ihodpfjhw Ng Iox Ag Uet Piece length reading by photocell Cutting cycle: with 6 optimizing criteria: (Longest length, Sequence, Board sequence, Volume, Minimum waste and Priority length) Package "OPTI PLUS": total optimization with knots and defects removal (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: Package "OPTI PLUS": for knots and defects removal Photocell for reading wood mapping knots and defects Marking with fluorescent chalks/crayon (Note Ð Can only be ordered in combination with ZA250) Pneumatic side clamp device

Condition: new, Year of construction: 2025, Sawmill Viking VBS1400 Log bandsaw with double cut bandsaw blades. Cuts back and forth!!! Roller diameter: 1000mm Bandsaw blades: double-sided = 150mm wide, single-sided = 140mm wide Blade speed: infinitely variable, 0 - 45m/s Feed speed: 0-60m/min. Log diameter: up to 1400mm (max. 1600mm) Iedpfx Aswwam Eog Ujht Cutting length: 6m (up to 12m extension possible, not included) Saw head: 3500 kg Digital cutting thickness adjustment via CNC touch panel Manual control unit with joystick Cutting view via green laser and video monitoring 30 kW saw motor Frequency converter 30kW - infinitely adjustable to regulate the saw blade speed for different types of wood Blok manipulation: Hydraulic Condition: New

Year of construction: 1984, condition: excellent (used), Blade diameter: 550 mm Minimum cutting length: 500mm Ihjdpjlrtntjfx Ag Uot Minimum cutting width: 100mm Maximum cutting height: 160 mm Minimum cutting height: 40mm Pneumatic clamps

Condition: excellent (used), IM Very good condition. Ijdoxcll Uepfx Ag Uoht

Condition: new, Year of construction: 2024, Customizable Sawing Machine: The Ideal Solution for Small and Medium Sections Total Optimization, High Precision, and Maximum Speed in One Tool TRV 1200 is the perfect saw for tackling the daily challenges of processing single boards, whether raw or painted. With its advanced technology, this ultra-fast and efficient cutting system allows you to optimize each operation without stress for the operators. Whether for small or medium sections, the TRV 1200 is designed to meet all your needs, with a continuous work cycle that ensures flawless performance. Intelligent Operation and Full Automation With the innovative touch screen, you can easily upload cutting lists directly from the device or remotely, from your office. Once you select the desired optimization, the system autonomously handles all subsequent stages, including: Material introduction (*see Cursal accessories) Automatic advancement and positioning Immediate data transmission to the CNC and optimization Piece evacuation Quality, width, and length selection (*see Cursal accessories) Maximum Speed and Precision Without Compromise With TRV 1200, speed is exceptional: 195 m/min, self-limited by the Brushless servo motor. The synergy of a high-performance optimizer, an indestructible machine structure, and precise table control ensures flawless results. The CNC-driven motorized belts and pneumatic pressure wheels guarantee perfect material positioning. Total Versatility for Every Type of Processing The TRV 1200 perfectly adapts to various applications, from recovery work to defect cleaning, or even more complex tasks that require advanced software processing. It is the ideal partner for optimizing every phase of the process, ensuring maximum results with minimal waste. Advanced and Easy-to-Use Programming Software Over 100 preset cutting plans: customizable widths, quality, and cutting specifications Different optimization options: for commercial value, for scrap, for quantity, for length, and mixed optimization Optimization simulation to ensure the best material management Continuous monitoring of worked quantities Internal optimization within the machine body to simplify the process and save valuable space Advanced Numerical Control for Efficient Management The heart of the TRV 1200 is the powerful CNC, an industrial computer that ensures continuous production without stoppages. With the HD touch screen, you can easily import data via USB and access simple yet powerful software, quick to learn and easy to use. Moreover, you can rely on online remote assistance for real-time troubleshooting. Discover how TRV 1200 can transform your production: speed, precision, and optimization at your fingertips. Ihodpfov Ip Uzsx Ag Ust

Condition: new, Year of construction: 2025, Semi-automatic optimising crosscut saw with electronic positioner with push-stop mode COSTCUTTING OPTIMIZING SAW Superpush 150 is the centre for the cutting and entry level optimisation. It is designed as the true technological evolution of traditional cutting methods, able to increase productivity and improve wood yield. EXTREMELY ROBUST Very robust and reinforced steel structure. Horizontal plane with mobile protection to favour the loading of the work piece. Carriage with custom-made stop function and pusher. Linear unit composed by toothed belt with steel cables inside and sliding guide with linear bearings. Horizontal and continuous piece deposit plane with width mm. 300. TECHNOLOGICALLY INNOVATIVE Electronic system composed by a touch screen panel with integrated NC. Software running on Linux with customized interface. Colour display 15,6”, resistant TOUCH SCREEN for a complete safety in industrial environments. Programs import via USB Possibility of Tele-service through internet. + Macro Excel. FAST Software S4U Lite Brushless positioner motor with digital servo-driver. Quick selection interface Stop/Pusher Adjustable cutting speed. RELIABLE AND SAFE Movements with sliding bearing with double anti-dust protection. Electric box separated from the machine and self-standing. Independent pneumatic regulations to adapt to different types of working. Two-handed safety manual control. Machine certified "CE" by the Certifying Agency, not self-certified. Ihedjg Hzvgopfx Ag Uot

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 035-110235, saw blade diameter: 650 mm, cutting height (max.): 245 mm, rotational speed (max.): 2,800 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Saw blade diameter: 650 mm Maximum cutting height: 245 mm Speed: 2,800 rpm Bore diameter: 30 mm Riving knife thickness: 5.4 mm Kerf width: 13 mm Saw blade height at 90 degrees: 245 mm Saw blade height at 45 degrees: 164 mm Saw blade height at 30 degrees: 113 mm Type of input power: Three-phase MACHINE DETAILS Motor power: 10 kW Motor speed: 3,000 rpm Electric saw blade tilt: 90° - 30°, with digital display Rotary table range: 30° - 150° Electrical Data Phases: 3 + N + PE Ijdpfoxpvtiex Ag Uoht Voltage: 400 V Frequency: 50 Hz Current consumption: 17 A EQUIPMENT Automatic guarding hood Pneumatic cross feed Laser for length cutting

Condition: ready for operation (used), functionality: fully functional, Blade diameter 450 mm upward cutting hydraulic blade feed stop with automatic positioning system Stop length 4200 mm Ihjdpfx Aowumndog Ust

Condition: excellent (used), functionality: fully functional, cutting height (max.): 100 mm, cutting width (max.): 150 mm, cutting length (max.): 352 mm, total width: 800 mm, total length: 4,150 mm, total height: 1,300 mm, saw blade diameter: 330 mm, overall weight: 600 kg, type of input current: three-phase, disc diameter: 330 mm, rotational speed (max.): 2,800 rpm, BLITZ 330-L double mitre saw for wood, aluminium Ihsdpfxexl Eadj Ag Ust Specification: • Condition – used, after inspection/service • Manufacturer – BLITZ • Model – 330-L • Main motors – 2 x 1.5 kW and 2,800 rpm • Pneumatic head control • Max. cutting length – 352 cm • Min. cutting length – 38 cm • Max. cutting cross-section – 100x150 mm (at right angle) • Max. blade diameter – 330 mm • Spindle axis – 20 mm • Miter cutting range – from -45 to +45 degrees (right, left) • Vertical workpiece clamps • Weight – approx. 600 kg • Overall dimensions – 415 x 80 x 135 cm (L x W x H) Additional information: • Very good, factory technical condition • Photos shown reflect the actual condition of the item for sale • Possibility to power up and test the machine on site

Condition: excellent (used), IM Very good condition. Ihjdpfx Agsxclluj Ujt

Condition: new, Year of construction: 2025, TRV 2200: The Perfect Optimizer for Companies Aiming to Stay Competitive The TRV 2200 is the most produced optimizer with the best quality/price ratio in its category, designed to radically transform the production cycles of companies. Here’s why it’s the ideal choice for those seeking superior performance, reliability, and innovation: Unbeatable Speed: With a speed limited to 300 ml/min, the TRV 2200 provides a rapid and smooth workflow, maintaining consistent efficiency. Maximum Precision: Ideal for cutting finished profiles, it guarantees a level of precision that meets even the most demanding requirements. Modular Design: The modular structure allows for customization that perfectly adapts to the needs of every company, optimizing space and production flows. Multi-accessorized: Equipped with numerous accessories for every need, offering unparalleled versatility. Excellent for Every Sector: Whether it's furniture, construction, or woodworking, TRV 2200 is a guaranteed success. Global Efficiency and Industry-Leading Performance Cut, optimize, and revolutionize your production processes: TRV 2200 is already the preferred choice for companies worldwide, which purchase it in series to enhance their competitiveness. This is thanks to minimal maintenance due to the elimination of dynamic components and passive transmissions, and a robust and reliable structure that ensures long-lasting results. Advanced Software Features: Over 100 customized cutting plans: widths, quality, and multiple options to optimize the process. Optimization choices between various modes: Commercial value, Waste, Quantity, Length, and Mixed Optimization. Optimization simulation to predict results before production. Accurate control of processed quantities to continuously monitor efficiency. Internal optimization within the machine body, simplifying the process and recovering valuable space. High-Quality Cutting Unit: Ihjdpov Iqdqjfx Ag Uot Tested conveyor drive system without engaging parts, combined with rubber anti-slip pressure wheels for universal use on various materials. High precision cutting, even with wet and curved boards, thanks to the use of durable materials that ensure constant speed and quality. Sectors Where TRV 2200 Excels: Semi-finished furniture components Parquet Windows and doors Laminated boards, slats, and structures Doors, frames, skirting boards, and construction Don’t miss the opportunity to discover how TRV 2200 can transform your production cycle. Watch the video to see its exceptional performance in action!

Condition: new, Year of construction: 2025, Push feed optimizing saw for the complete optimization of the wood and the elimination of the defects. COSTCUTTING OPTIMIZING SAW SuperPush 200 is a true technological evolution of traditional cutting methods. It is able to increase productivity considerably, reduce staff usage to a minimum, and improve wood yield. EXTREMELY ROBUST Ijdpfx Aefg U H Njg Ueht Very robust and reinforced steel structure. Special 30° inclined plane to favour the loading and keep the work piece squared. Pusher carriage dimensions mm. 300x345x25. Toothed belt width 50 mm. with 33 steel strips inside. Horizontal deposit/marking plane with width mm. 300. TECHNOLOGICALLY INNOVATIVE Electronic system composed by a computer connected in real time to a last generation numeric control. Software running on Windows. Complete with 5 qualities managing. 22” LED colour screen. Tele-service trough internet. + Macro Excel included. FAST Total optic system. Brushless servo driver motor for the pusher. Intelligent pressure beam. Adjustable cutting speed. RELIABLE AND SAFE Transmission system with sliding on double hardened and rectified guides. “Skf” sliding bearing with double anti-dust protection and automatic lubrication. Electric box separated from the machine and self-standing. Independent pneumatic regulations to adapt to different types of working. Safety closing protection on back side.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, OMGA V 235 Iedjw Tc Hrjpfx Ag Ueht - precise cutting from the program, - with a controlled ruler, (with a stop) - 3.7Kw, 350mm sheet size.

Condition: used, Year of construction: 1980, functionality: fully functional, Canali Band Saw TB 1100 Manufacturer: Canali Germany Year of manufacture: 1980 Band Saw with center cut centering Ihsdpfx Agsv Ny S Te Uet Roll diameter: 1100 mm Max. saw blade width: 100 mm Roll width: 90 mm Max. saw blade length: 6800 mm Min. saw blade width: 6500 mm Main motor: 22 kW Infeed device tilt adjustment: 0-45 ° Feed speed: 0-30 m/min Feed chain height: 300 mm For center cut, clearance width: 300 mm To the left of the saw blade: 150 mm Saw blade tension: manual 400 V / 50 Hz Weight: 3500 kg Technical specifications subject to change

Condition: excellent (used), Year of construction: 2007, I sell the middle cut throughfeed saw HOMAG FPL620/06/15/P S/LQ. Year 2007. Working width 204 - 1304mm Working thickness 12 - 60mm Cutting width 100mm Free end width 300mm Feeding speed 10 - 40 m/min. Configuration: 1 + 1 Stk. cutting aggregates top + bottom 1 Stk. cutting aggregate flexible top/bottom 1 Stk. cutting aggregate flexible top/bottom 1 Stk. grooving aggregate with jump for softforming function Ijdpfx Askbx Eajg Ueht Material pressure feeding band from top Throughfeed machine. Very good condition. Available immediately.

Condition: excellent (used), 0.75 kW motor Working height max. 7 cm Ihjdpfxevc Anws Ag Ujt Table width 65 cm Table length 97 cm

Condition: new, Year of construction: 2025, Angled Cutting for Single Boards and Packs of Boards: Efficiency and Precision Without Compromise Ihsdpfxov Iqd Rs Ag Uet The TRGSI, just like the TRSI, is a monoblock system designed to ensure outstanding installation speed and effective vibration reduction. A true innovation powerhouse for achieving flawless results in record time! Programmed Cutting for Single Boards and Packs Fixed Measurements and Customized Sequences: Thanks to the ability to manage various cutting schemes, it’s easy to set up fixed or sequential cuts, optimizing every operation. Industrial CNC Technology: An advanced system that allows for the quick storage of different cutting plans. Up to 25 different measurements can be managed simultaneously, with angled heads and independent options for every specific need. Customizable Cutting Programs: Work parameters (such as quantity and waste) are easy to set and can be customized according to individual preferences. Each cutting plan can be saved for quick access. Easy Program Loading: Cutting programs can be uploaded via USB in just a few steps, with files in .txt format for practical and fast management. Advanced Optimization: Two cutting versions to maximize efficiency: OL Version optimizes length, while the E Version offers total optimization, minimizing waste. Operating Dynamics Fast and Precise Movement: The steel guide with ball recirculation and dual sliding carriage, powered by brushless motors, ensures unmatched speed and accuracy. Durability and Perfect Sliding: The reinforced structure ensures optimal sliding, increasing the system's durability and reliability. Pneumatic Pusher: Equipped with fully protected and highly visible stroke, the pneumatic pusher system ensures maximum control and precision. Perfect Angling and Precision: The synchronization between the lateral arm before the blade and the pneumatic presses guarantees a perfect cut, both in quality and angle. Advanced Accessories for Loading and Unloading With dedicated accessories, the system can be configured for manual or fully automatic loading and unloading operations, ensuring an uninterrupted workflow.

Condition: used, OMGA T421 IDC000097 - saw blade diameter: 400 mm Isdpfx Agsu Dhupj Ujht - complete with saw dust filter

Year of construction: 2005, condition: excellent (used), I sell the thin cutting mini frame saw gatter NEVA TR88 Orbit plus, year 2005. Configuration with top + bottom moulding heads 1,5 + 1,5 KW suitable for later lamellas gluing Main motor 15 KW Working height 270mm Digital working height adjustment w. ELGO Electric Positioner Digital feedign speed adjustment w.MKS Total weight 2800kg. Iedpfx Aeiuc Sceg Ueht Lot extras, saw leafs, adjustment elements and frame adjustment device indluded. Very good condition. Fully working. Made in Czech republic.

Condition: new, Year of construction: 2025, TRSI Monoblock Integrated Pusher – The Top of the Range in Europe If you are looking for an innovative, fast, and reliable automatic optimizing crosscut saw, the TRSI is the ideal choice. Fully customizable to meet your specific needs, it is designed for fixed-length or optimized cutting, making it suitable for a wide range of industrial applications. Ideal for Various Industries Packaging – Precise cutting of single boards or bundles, also perfect for trimming plugs. Windows and Doors – Advanced optimization to select quality and defects, minimizing waste. Furniture – Millimetric precision for cutting finished semi-finished products with maximum quality. Flooring and Parquet – High-precision cutting for wooden flooring applications. Cutting-Edge Technology The TRSI is equipped with an advanced programming software that simplifies operations and optimizes production processes: Fixed-Length Cutting: Predefined sequences for repetitive and precise machining. Optimized Cutting: OL Version: Length-based optimization to minimize waste. E Version: Full optimization with defect elimination to maximize yield. Customizable Optimization Priorities: Choose between commercial value, waste reduction, quantity, length, or a mixed strategy. Immediate Integration with company management systems without additional interfaces. Online Remote Assistance for continuous technical support. Intuitive HD Touchscreen with USB data import capability. Industrial CNC Computer ensuring uninterrupted production. Ultra-Precise and Fast Movement Ijdpfov Iqcmjx Ag Ujht High-speed pusher system on steel linear guides with ball recirculation and double carriage, ensuring smooth and precise movements. High-performance brushless motors for superior speed and reliability. Reinforced structure for flawless movement, eliminating vibrations and slippage. Protected stroke with visible pneumatic lifting, allowing maximum control in every cutting phase. Powerful and Reliable Cutting Unit Robust aligner with integrated silent blower for a more comfortable working environment. Pneumatic pressure system on linear guides with ball recirculation for perfect holding. Multiple rubberized wheels with oil-bath clutch, ensuring maximum grip and preventing slippage. Accessories to Maximize Productivity Custom loaders to eliminate downtime and boost efficiency. Manual and automatic printers for clear and precise marking of semi-finished products. Optimized unloading systems tailored to specific processing needs. Trust Cursal for Uncompromising Production Efficiency With the TRSI, your company can achieve unprecedented levels of efficiency and precision. Discover our accessories, loaders, and unloaders to customize your system and optimize every stage of the cutting process. Contact us today for a customized consultation and take your production to the next level.

Condition: used, Double rip saw IDL000811 - max width: 2500 mm Iodpfx Agju At Tbo Ujht - electric cabinet - manufacturer: Tegle/norway

Condition: new, Year of construction: 2025, TVM Ø 400 - The Versatile and Customizable Saw for Your Carpentry Workshop The TVM 400 is the all-purpose saw that is essential for your workshop. With a solid and high-performance structure, it is designed to provide an excellent solution for cutting small-section woods, quickly eliminating knots and imperfections. Thanks to the option of customizing it with accessories such as roller conveyors and stops, the TVM 400 ensures maximum versatility and productivity (discover more details in the ACCESSORIES section). Iedpfxov Iqaxj Ag Uoht Key Features: Efficient and Cost-Effective: Ideal for small and medium-sized carpentry workshops, offering excellent value for money. Ease of Use: Perfect for use without the need for highly skilled personnel, saving time and resources. Reliability: Always ready for use, supporting all operational needs and reducing machine downtime. Cost Optimization: With the TVM 400, you get a durable machine that doesn’t require frequent maintenance interventions. Advantages: Operator safety ensured by a design aimed at reducing risks. Optimized ergonomics to improve productivity during processing stages. Wear compensation of materials without the need for frequent replacements. Simplified maintenance to reduce costs and increase efficiency. Ready for CURSAL accessories, offering full customization according to production needs. Rationalized cost/quality ratio, making the machine a smart investment. Applications: Production of semi-finished wooden furniture components. Manufacturing of window frames and similar applications. Small-batch production of various types, for specific needs. TVM Ø 500 - The Advanced Solution for High-Volume Production The TVM 500 is one of the most in-demand saws on the market for its ability to handle high-volume production with quality and precision. The optimal cutting section allows for the processing of 90% of squared boards and is perfect for industries that require high performance, such as packaging, construction, and the production of sofa frames and laminated panels. This machine offers maximum flexibility and precision in operations, thanks to advanced features such as: Electropneumatic stops, ideal for cutting stacked boards with repetitive measurements. Numerically controlled stops, for precise measurement management, even in complex processes. Discharge of semi-finished products via transfer systems, discharge tables, or roller conveyors, ensuring smooth and fast material handling. Main Advantages: High productivity for large-volume applications. Versatility in sizes and configurations, adaptable to multiple industries. Operational flexibility supported by advanced accessories. The TVM Ø 500 represents a strategic choice for those seeking a saw capable of meeting the most demanding challenges in the industry, while maintaining high standards of quality and efficiency.

Condition: new, Year of construction: 2024, machine/vehicle number: TRV 2000 Ø700R, High-Speed Optimization in Sawmills: TRV 2000 Makes It Possible! Discover TRV 2000, the perfect optimizer for both planed and unplaned boards, designed to deliver high precision, large cutting capacity, and incredible speed. A perfect combination of performance that will revolutionize your sawmill's workflow! Advanced Technology for Outstanding Results The TRV 2000 is equipped with the tried-and-tested CURSAL software, the technological core powering other optimizer series as well. This software is the ideal solution to speed up the production process, optimizing logs by recovering the lateral part, which traditional machines cannot efficiently utilize. It synchronizes perfectly with the multi-blade system to complete the cycle efficiently. With a feed speed of 150 m/min (auto-limited), thanks to the Brushless motor, TRV 2000 eliminates the risk of accumulations, maintaining a continuous flow that integrates seamlessly with the fastest log saws. Uncompromising Precision TRV 2000’s precision is so high that re-sawing after passing through the multi-blade system is unnecessary. Thanks to its innovative technology, it is ideal for optimizing medium-sized, precious woods, making it the perfect choice for those seeking flawless results. Superb Design and Functionality Ihedpfx Agsv Ip U Io Uot The machine body is equipped with a reliable feed system, enabling movement from right to left through 8 toothed rollers. Pneumatic pressure wheels are specifically designed for unplaned boards, and the in-line optimization capability within the monoblock of the cutting machine allows it to work on curved and twisted boards. Explore Incredible Performance Watch the video on the side and see how TRV 2000 can optimize your production with extraordinary performance. Ideal Applications: Semi-finished wood products for furniture Packaging industry Recovery of boards from the sides of the log Windows, construction, and flooring Laminated, planks, structures TRV 2000: The Ultimate Solution for Modern Sawmills.

Condition: new, Year of construction: 2025, TRV 1700: High-Performance Optimizing Saw for Finger Joint and Moulders The TRV 1700 is the ultimate solution for woodworking professionals, offering precision, speed, and advanced optimization. Designed in three different configurations with Ø 500, 550, and 600 mm blades, this optimizing saw is available in the following versions: TRV 1700A – Automatic with programmed cutting TRV 1700E – EB – Optimized cutting to maximize yield and reduce waste TRV 1700S – Simple cutting on mark for essential operations Thanks to its high versatility, the TRV 1700 is perfect for quickly removing knots and defects from wooden boards. It is the ideal machine for applications where maximum length is a priority, such as parquet flooring, or when only defect selection is required. Advanced Optimization Software Over 100 cutting plans, customizable by width and quality Smart optimization algorithm for: Commercial value Waste reduction Quantity Length Mixed optimization Ijdpfxev Iqbpj Ag Ujht Pre-cut simulation for maximum efficiency Real-time monitoring of processed quantities Integrated optimization within the saw, simplifying the workflow Machine Structure & Technical Features Reliable conveyor belt traction system without adhesive parts Non-slip rubberized pressure wheels, suitable for all materials Thick pressor for safe clamping of chips and irregularities PLC-controlled silent blowers for continuous workspace cleaning The TRV 1700 integrates seamlessly with moulders and finger jointers via Cursal’s feeding systems, ensuring a smooth and efficient in-line production process. With a wide range of customizable accessories (see the dedicated section), it can be upgraded from a standard version to a fully equipped high-end configuration. Recommended Applications Parquet flooring – Ideal Windows and construction – High compatibility Furniture components – Well-suited Laminated beams, planks, structures – Well-suited Finger joint recovery – Ideal Choose the TRV 1700 for optimized cuts, reduced waste, and maximum production efficiency.