Used Curve Controlled for sale (46,021)

Year of construction: 2014, condition: used, This listing is for a Freestead Technology WFI Storage Vessel Control panel. The unit is in full working condition and is ready for immediate release. Kedpfxjxv A Srj Adtowt This Unit was installed new in 2015 by Freestead Process Technology. A control panel designed and built for WFI system

Condition: used, This listing is for a Hirschman Pipetus 100 Rechargeable Pipette Controller The unit is in full working condition and is ready for immediate release For all pipetting from 0.1 ml to 200 ml Key Features: Wide Volume Range: Compatible with all measuring, volumetric, and Pasteur pipettes from 0.1 ml to 200 ml Precision Dispensing: Fine dispensing valves with ceramic compound valve pins offer maximum chemical resistance and zero wear Adjustable Speeds: Five finely tuned performance stages allow for exact and continuously variable pumping and suction speeds for both filling and venting Ergonomic Design: Crafted for non-fatiguing, long-term use Kwjdpjxv Ax Ssfx Adtjt Low Noise Operation: Pump motor operates quietly and without vibration Clear Display: Integrated color display shows pipetting mode, speed level, and battery status Advanced Charging System: NiMH rechargeable battery Inductive, contact-free charging Microprocessor-controlled charge cycle Included Accessories: Inductive charging and park station Standard wall bracket Reliable Sealing: Tight silicone adapter seals all pipettes securely PTFE Filter Protection: Built-in hydrophobic PTFE diaphragm filter (0.2 µm pore size) prevents contamination.

Condition: used, Electric chain hoist crane DEMAG Type PM 8 - Manulift Serial No. 5319450 Year of manufacture: 1979 Load capacity: 80 kg Hook travel: 2.9 meters Distance from suspension to load hook: 700 mm Main lifting speed: 12 m/min Precise lifting speed: 2 m/min 1 fall = 80 kg Manulift hand control directly on the crane hook Mains connection: 380 Volt, 50 Hz Weight: 20 kg in good condition Kedpfx Aoxcbnledtswt

Condition: used, Specifications: Composed of 2 motorized 90° curved conveyors. Curve radius: 3 m at axis. Total deployed length: 4.80 m. Overall conveyor structure width: 750 mm. Varnished beechwood slats: 620 x 54 x 42 mm. Adjustable height from floor: 500–650 mm. Driven by chains and sprockets. Lateral guidance and lower return via slide rails made of synthetic material. Integrated drive gearmotor. Contactor-disconnector box. Emergency stop and isolator. Control cabinet with electronic frequency inverter operating both curved belts. Kwjdpfx Asx Sx Iqjdtst

Condition: used, CNC cycle controlled lathe HARRISON type Alpha 400 Plus Machine No. P30180/150 Year of construction 1998 center distance 1250 mm turning diameter over bed 400 mm center height 200 mm Kwodpfoh Hvk Asx Adtet Swing diameter over cross slide 245 mm Swing diameter in the bend 585 mm bed width 313 mm face travel (X-axis) 250 mm Tailstock spindle diameter 73 mm Tailstock quill stroke 140 mm Tailstock quill mount MK 5 spindle bore 54 mm spindle head size Camlock D1 size 6 Spindle speed 20-2500 rpm. Spindle speed range (stage 1) 15-275 rpm. Spindle speed range (stage 2) 35-795 rpm. Spindle speed range (level 3) 110-2500 rpm. Feed rate X and Z 0.03 - 0.6 mm/rev. Rapid traverse speed X axis max. 2000 mm/min. Rapid traverse speed Z-axis max. 4000 mm/min. Threading function Metric / Inch / Diametral / Module Spindle drive power 7.5 KW Mains connection 400 Volt, 50 Hz, 23,5 kVA - cycle control Harrison Alpha / GE FANUC - language in French (France) - automatic gear range shifting in 3 steps (15-275, 35-795, 110-2500 rpm.) - electronic handwheels with different transmission ratios (1/10/100) - 3-jaw face spiral lathe chuck FORKARDT Ø 250 mm type CSN, 1 set of soft top jaws - quick-change tool holder MULTIFIX size B with 2 inserts - 1 piece of centering point running with the tool - 1 piece quick-action drill chuck RÖHM, 3-16 mm - hinged lathe chuck guard - hinged working area protection doors - chip tray with coolant device under the machine bed - Switch cabinet fixed to the machine - Interface RS 232 Space requirement L x W x H 2600 x 1450 x 1550 mm weight 1950 kg good condition

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Serial No. MK 285 Year of manufacture 1998 CNC Control SAFAN Software Version 5.07 TS1 Pressing force 500 kN (50 tons) Working length 2550 mm Stroke 215 mm Clearance between side frames 2700 mm Tool installation height max. 414 mm Table width 55 mm Table height above floor 950 mm Approach speed approx. 75 mm/s Kodpfxoxpqy Do Adtjwt Return speed approx. 75 mm/s Working speed approx. 1.6 to 15 mm/s Motor power 9 kW Power supply 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN Software Version 5.07 TS1, Y1 and Y2 axis for press beam - 2-axis back gauge: X-axis (depth adjustment), R-axis (height adjustment) - 2 back gauge fingers, lateral manual adjustment (Z1, Z2) - Press beam driven by 2 servomotors and belt drive - Infinitely variable working speed - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for upper tool UKB system, Type 50.571 (UKB System A) - Tool mount for lower tool: 55 mm wide with 13 mm slot, slot depth 21 mm (Trumpf system or UKB System B) - Without press brake tools (new tool set from UKB costs approx. EUR 3,600 net) - Total recorded operating hours = 8,120 h - Work strokes 1,049,789 Space requirement (L x W x H): 3450 x 1850 x 2650 mm Weight 5,000 kg Good condition

Condition: used, Year of construction: 2008, turning diameter 560 mm turning length 2000 mm Kjdpfx Ajviyh Uedtjwt control FANUC Series oi-TC CNC spindle turning speed range 2200 U/min spindle bore 82 mm tailstock quill taper MT 5 quill stroke 150 mm total power requirement 7,5 kW weight of the machine ca. 3800 kg dimensions of the machine ca. 3800 x 1750 x 1600 mm

Condition: new, Year of construction: 2019, functionality: fully functional, BIHLER cards for BIHLER controls: Kwsdpjx U D S Hefx Adtot 1 pce. BIHLER # 800-97-0355.1 1 pce. BIHLER # 800-97-0356.1 1 pce. BIHLER # 800-97-0357.1 1 pce BIHLER # 800-97-0358.1 1 pce BIHLER # 800-97-0465.1 1 pce BIHLER # 800-97-0467.1 1 pce BIHLER # 800-97-0613.1 1 pce BIHLER # 800-97-0614.1 1 pce BIHLER # 800-97-0615.1 1 pce. BIHLER # 800-97-0656.1

Condition: used, This listing is for a Horizon SPE-DEX 4790 controller Kodpfoxzhtfex Adtswt

Condition: used, Various remote controls for mobile screening plants EXTEC/SANDVIK Track Control Handset Track Handset Kwodpfexz Ez Tox Adtet Manual Handset Frequency: 418 and 433 Hz / 11 bit

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2042.6958-01, quill diameter: 160 mm, overall weight: 8,000 kg, rotational speed (min.): 6 rpm, rotational speed (max.): 1,600 rpm, distance between centers: 3,000 mm, VDF lathe type 800 DUS in very good condition. Specifications: Heidenhain Manual Plus 620 control Speed 6-1600 rpm (2 steps) Swing over bed 800 mm Spindle bore 128 mm Distance between centers 3000 mm Spindle mounting DIN 55027 No. 11 Year of manufacture 2017 Dimensions 6,320 mm (including chip conveyor + 1,200 mm) 2,930 x 2,440 mm Kwodpfxex S Nv So Adtet Weight 8,000 kg Accessories: Heidenhain Manual Plus 620 control Steady rest 250-500 mm 4-jaw chuck 700 mm 4-jaw chuck 450 mm 3-jaw chuck 315 mm Parrat tool holder with 4 holders

Condition: ready for operation (used), functionality: unexamined, A good used B&R Touchscreen control panel from a Cintex Checkweigher - came out of working machine Kedpfxjwzvmis Adtswt Ready to ship worldwide We look after export documentation and shipping if required

Condition: excellent (used), Control accessory Manufacturer: Alleen Bradley Logi Pac 1756-L61 Kwsdpfxjx Rqu He Adtst (28685 II)

Condition: excellent (used), Accessories: Control system Manufacturer: Allen Bradley Type: Ethernet 10/100 Adapter 1794-AENT (28685 IV) Kjdpfjx Rqt Njx Adtowt

Condition: excellent (used), Year of construction: 1996, turning diameter 380 mm turning length 750 mm control HEIDENHAIN ManualPlus total power requirement 9 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,4 x 1,7 x 1,7 m Kodpfxex U Encj Adtjwt

Condition: excellent (used), Filter control valve, switching valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, maintenance unit combination, filter control valve Kedpfxox Ryias Adtewt -Manufacturer: Festo, Maintenance unit filter control valve -Switching valve: MS6-EM1-1/2 -Filter control valve: M56-LFR-1/2-D7-ERM-AS -Switching valves: M56-EE-1/2-V24 M56-EE-1/2-V24-S -Pressure build-up valve: M56-DL-1/2 -Branch module: M56-FRM-1/2-Y -Individual components: see photos -Number: 3x maintenance unit available -Price/Distribution: per piece, complete unit -Dimensions: 440/120/H340 mm -Weight: 5.2 kg/pc.

Condition: excellent (used), Filter control valve, switching valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, maintenance unit combination, filter control valve -Manufacturer: Festo, Maintenance unit filter control valve -Type: MS9-LFR-3/4-D7-EUM-AG-BAR-AS 562531 -Quantity: 1x filter control valve available Kedpfx Asx Ryhiedtewt -Dimensions: 440/115/H205 mm -Weight: 3 kg

Condition: excellent (used), Filter control valve, switching valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, maintenance unit combination, filter control valve -Manufacturer: SMC, Maintenance unit filter control valve -Soft start valve: AV4000-F04-5Y0-X260-Q -Pressure switch: I SE30A-01-P -Filter control: AW40-F04H-A -Switching valve: VHS40-F04A -Individual components: see photos -Price/Fee: complete -Dimensions: 340/120/H250 mm -Weight: 2.3 kg Kwedpfx Adjx Ryhcotet

Condition: used, Year of construction: 2018, operating hours: 664 h, 2018 | Ammann ARR 1575 – Remote-Controlled Trench Roller Ideal for Soil Compaction | Used Tandem Roller | 664 hours 📍Location: France, Noyelles-Godault 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 5500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 35 inspection points 32 approved ✅ 3 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Fully functional roller. The engine runs well. Engine hoods are cracked and broken, requiring attention before the machine can be used. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "38858 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Kwjdpfx Aox R E Hdsdtst 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Filter control valve, switching valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, maintenance unit combination, filter control valve Kwjdpfx Aox Rx S Tedtot -Manufacturer: Festo, Maintenance unit filter control valve -Switching valves: MS6-EM1-1/2-S M56-EE-1/2-V24-S -Filter control valve: M56-LFR-1/2-D6-CRV-AS -Branch modules: M56-FRM-1/2-Y -Pressure build-up valve: M56-DL-1/2 -Individual components: see photos -Price/Fee: complete -Overall dimensions: 440/340/H110 mm -Weight: 5.3 kg

Condition: used, Crane remote control, crane control, crane control, pendant control, control switch, control cylinder Kodstrznvepfx Adtewt -Handover: in its current condition as inspected -Housing damaged, cable without connector, see photos -Manufacturer: Demag, crane remote control control unit -Cable length: 2.0 m / 5-core -Dimensions: 500/300/H100 mm -Weight: 1.9 kg

Condition: good (used), conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor Kodpfx Aovuzdusdtjwt -Manufacturer: Interroll, belt conveyor -Speed: frequency controlled, now set speed 3600 mm/min -Belt width: 455 mm -Conveyor length: 5685 mm -Drive: SEW-Eurodrive 0.55/0.055 kW, see photo nameplate -Number: 2x conveyor belt available -Price: per piece -Transport dimensions: 5720/830/H365 mm -Weight: 189 kg/pc.

Condition: good (used), PLC control, electronic module, PLC control -Manufacturer: Schneider, PLC control TSX Micro -Type: TSX3710001 -Dimensions: 170/135/H150 mm Kodsvn Ncfjpfx Adtswt -Weight: 2.3 kg

Year of construction: 1994, condition: used, Hydraulic control block for hydraulic pump, hydraulic unit, control block, hydraulic control block, control unit, control valve, servo valve -Manufacturer: HACO, hydraulic control block from press brake type PPES 30135 -Control valve: hy hydraulic ring WLL43G06P012KB4 / WEF42A06C1 Ksdorqin Ujpfx Adtewt -Lifting magnet: Magnet-Schulz G RF Y 045 F20 E11 -Individual components: Type/number see photos -Dimensions: 540/380/H400 mm -Total weight: 23 kg

Condition: good (used), Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, steep conveyor, steep conveyor belt Kodpforu Rayox Adtjwt -Conveyor belt: Conveyor belt housing VA, hydraulically height-adjustable on mobile base frame -Speed: 1.2 to 57 m/min -Conveyor belt width: 770 mm -Conveyor belt length: 7160 mm -Outlet height: 1090 to 1900 mm, dimensions see technical photo. drawing -Transport dimensions: 7800/1130/H2000 mm -Weight: 1600 kg