Used Curve Controlled for sale (45,610)

Condition: used, Year of construction: 2001, Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Transnorm, belt conveyor type TS 1200 -Speed: frequency controlled, up to approx. 205 m/min Itsdpfjp Ta Uvjx Aacjn -Drive: SEW-Eurodrive 0.055/0.55 kW, see photo of nameplate -Voltage: 380-500V -Brake: 5 Nm -Strap width: 500 mm -Conveying length: 848 mm -Quantity: 2x conveyor belt available -Price per piece -Transport dimension: 875/700/H345 mm -Weight: 64 kg/St.

Condition: good (used), Year of construction: 2011, TAF item number: 1000003779 Manufacturer: Dörr Year of manufacture: 2011 Overall dimensions (LxWxH): 1,550 x 500 x 420 Width incl. side panel in mm: 495 Width incl. drive in mm: 510 Side height in mm: 150 inside - 225 outside Conveyor width in mm: 300 Itedpfjm Twvzsx Aacen Curve (degrees): 90° Curve radius, inside: 550 Curve radius, outside: 1150 Belt type: PVC, smooth Belt width in mm: 400 Sliding surface: steel Running direction: right Drive: centre station Motor type: gear motor Motor data: SEW 0.37 kW Conveyor speed in m/s: 0.45 m/s Net weight in kg: 90 Condition: used / fully functional Function test: OK

Condition: used, Year of construction: 1994, turning diameter 570 mm turning length 2000 mm control Sinumerik 805 Siemens swing diameter over face slide 365 mm main spindle speeds: 3-2.500 U/min drive of main spindle 15/19 kW spindle bore 62 mm spindle head DIN 55027 No.8 Itsdpfx Aaeu Sbkgscsn tailstock taper MT 5 quill stroke 190 mm pinole diameter 80 mm feed range - long. and cross 0,01-50 mm/u total power requirement 50 KVA weight of the machine ca. 5 t dimensions of the machine ca. m

Condition: used, Year of construction: 2017, Emcomat E300 for sale. The machine was manufactured in 2017. Machine type: EM300x1500 SIEM Some repairs have been carried out and the following defects are known to us: Geometry checked. Z-guides in the area of the main spindle (chuck) are slightly worn. Z-slide tilts in X and Y under load up to 0.1mm; in this range, precise work is no longer possible at higher clamping pressure. Tool changer checked and adjusted. X-axis belt replaced and machine zero point set. Automatic band lubrication oil loss – troubleshooting performed, problem resolved, lubrication oil line renewed. Itedpfxjw I S Uuo Aacen Machine is operational – with reservation regarding Z-axis guidance.

Condition: ready for operation (used), Year of construction: 2009, turning diameter over cross slide: 500 mm, spindle bore: 75 mm, turning length: 1,000 mm, turning diameter: 500 mm, Equipment: rotational speed infinitely variable, Dormac CY-K500T Teachin lathe Turning diameter above bed: 500 mm Passage: 75 mm Turning length: 1000 mm Transport dimensions (LxWxH): 300x180x210 cm Weight: 2800 kg Steering: Fagor Year of construction: 2009 Options: Including tools and documentation Location: Hamont-Achel, Belgium Call or mail for more information See also our other advertisements We are also looking for industrial machines throughout the year. Do you have redundant machines, mail them to us with pictures and information. Dormac CY-K500T Teachin lathe Turning diameter above bed: 500 mm Tube diameter: 75 mm Turning length: 1000 mm Transport dimensions (LxWxH): 300x180x210 cm Weight: 2800 kg Control: Fagor Year of manufacturing: 2009 Options: Includes tools and documentation Location: Hamont-Achel, Belgium Call or email for more information: Also view our other advertisements We are also looking for industrial machines all year round. If you have redundant machines, email them to us with photos and information. Dormac CY-K500T Teachin Drehmaschine Drehdurchmesser over the bed: 500 mm Basket door diameter: 75 mm Drehlänge: 1000 mm Transport abmessungen (LxWxH) 300x180x210 cm Weight: 2800 kg Steuertyp: Fagor Construction year: 2009 Optionen: Enthält Tools und Dokumentation Standort: Hamont-Achel, Belgium Für weitere Informationen rufen Sie an oder senden Sie eine E-Mail Sehen Sie sich auch unsere anderen Anzeigen an Wir sind auch das ganze Jahr über auf der Suche nach Industriemaschinen. Wenn Sie über redundante Maschinen verfügen, senden Sie uns diese per E-Mail mit Fotos und Informationen Iodpfxerfxihe Aacotn

Condition: used, Year of construction: 2007, functionality: fully functional, turning diameter over cross slide: 435 mm, spindle bore: 70 mm, turning length: 1,500 mm, turning diameter: 640 mm, center width: 1,500 mm, turning diameter over bed slide: 640 mm, swing diameter over cross slide: 435 mm, quill stroke: 190 mm, quill diameter: 100 mm, quill travel distance: 190 mm, center height: 320 mm, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, swing diameter over bed slide: 640 mm, spindle speed (min.): 3 rpm, spindle speed (max.): 2,500 rpm, feed length X-axis: 365 mm, feed length Z-axis: 1,500 mm, feed rate X-axis: 10 m/min, feed rate Z-axis: 10 m/min, bed width: 1,800 mm, workpiece weight (max.): 1,600 kg, type of input current: AC, travel distance cross slide: 365 mm, rotational speed (min.): 3 rpm, rotational speed (max.): 2,500 rpm, three-jaw chuck diameter: 315 mm, torque: 640 Nm, travel distance X-axis: 365 mm, travel distance Z-axis: 1,500 mm, workpiece weight between centers: 1,600 g, spindle diameter: 100 mm, workpiece diameter between centers: 640 mm, distance between centers: 1,500 mm, workpiece length between centers: 1,500 mm, chuck outer diameter: 315 mm, Equipment: rotational speed infinitely variable, Model: VDF Boehringer DUS 630 Swing diameter over bed: 640 mm Swing diameter over cross slide: 435 mm Travel of cross slide / top slide: 365 mm / 145 mm Center height over flat bed: 320 mm Iedpfxewywxdo Aacetn Distance between centers: 1,500 mm Cross slide dimensions (W x L): 265 x 630 mm Top slide dimensions (W x L): 220 x 425 mm Turning tool section: 32 x 25 mm Spindle bore: 70 mm Front spindle diameter: 100 mm Max. torque (40% / 100% duty cycle): 1,600 / 640 Nm Speed range (overall): 3–2,500 rpm Gear stages: 2 Constant cutting speed: 1–9,999 m/min Feed range transverse/longitudinal: 0.01–50 mm/rev Max. feed rate transverse/longitudinal: 10 m/min Rapid traverse transverse/longitudinal: 5 m/min Feed force transverse/longitudinal: 12,500 N Metric thread pitches: 0.1–400 mm Quill diameter / stroke / taper: 100 mm / 190 mm / MT5 Faceplate: Ø 630 mm Setover tailstock center: Ø 150 mm Workpiece weight (max.): Between centers: 400 kg With tailstock & 2 steadies: 1,600 kg Display: 10.4" color LCD, showing (among others) spindle speed, feed rate, position, tool, load

Condition: good (used), Year of construction: 2014, Conveyor belt, belt conveyor, conveyor belt, belt conveyor, belt conveyor -Manufacturer: Transnorm, belt conveyor with central drive -Type: 1100 -Speed: frequency controlled, up to 58.7 m/min -Drive: SEW-Eurodrive 1.1/0.11 kW, see photo nameplate -Belt width: 600 mm - Conveyor length: approx. 15000 mm / approx. 1000 mm (height adjustable) -Set-up dimension: 15120/970/H340 mm -Transport dimension: 4440/970/H1430 mm Itsdpfoign U Sox Aacsn -Total weight: 492 kg

Condition: good (used), Year of construction: 2011, TAF item number: 1000005238 Manufacturer: Dörr Year of manufacture: 2011 Overall dimensions (LxWxH): 1,700 x 600 x 420 Width incl. side panel in mm: 590 Width incl. drive in mm: 600 Side height in mm: 150 inside - 225 outside Conveyor width in mm: 400 Curve (degrees): 90° Curve radius, inside: 550 Curve radius, outside: 1,150 Belt type: PVC, smooth Iedpfx Aasivaimecjtn Belt width in mm: 500 Sliding surface: steel Running direction: right Drive: centre station Motor type: gear motor Motor data: SEW 0.37 kW Conveyor speed in m/s: 0.45 m/s Net weight in kg: 110 Condition: used / fully functional Function test: OK

Condition: new, Year of construction: 2025, functionality: fully functional, spindle bore: 50 mm, turning diameter over bed slide: 400 mm, center height: 200 mm, spindle speed (min.): 50 rpm, spindle speed (max.): 4,000 rpm, total length: 2,495 mm, total width: 1,730 mm, total height: 1,700 mm, type of input current: three-phase, overall weight: 1,500 kg, rotational speed (min.): 50 rpm, rotational speed (max.): 4,000 rpm, three-jaw chuck diameter: 200 mm, Equipment: rotational speed infinitely variable, Cycle controlled lathe center width 1000 mm centre height 200 mm spindle bore 53/50 mm max. Speed 4000 rpm Spindle connection size 5, DIN55029 Max. drive power Drive power 7,5 / 10 kW Manual machine (operation via electronic handwheels) Siemens 828D full CNC control Ijdpsdtmwtjfx Aacotn dimensions (LxWxH) 2320 x 1730 x 1700 mm Machine weight 1500 kg As a regional partner of EMCO we offer maintenance, service and training in the field of conventional machines. Visit our showroom in Stuttgart for machine inspections.

Condition: good (used), Year of construction: 2011, Features: Condition: fully functional, with traces of use. Feet to be ordered separately Color: blue Material: Steel Ideal for fast material transport Professionally disassembled and packed Price per piece 7 pieces in stock Technical data: Dimensions of the roller conveyor curve Total length outside approx.: 1830 mm Total length inside approx.: 840 mm Total width: 1.015 mm Conveyor width: 1,010 mm Roller diameter: 50 mm Curve radius approx.: 45 degrees Itodpfx Aajfhii Hocen Frame Height: 390 mm Roller conveyor curve Due to the excellent workmanship of the roller conveyor curve, your material will glide smoothly to its destination, even under heavy load. Customized solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods, we are your competent partner! We would be pleased to prepare your individual offer or to advise you on conception or assembly questions. Just let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of specialists. For companies in a wide range of industries, such as: Logistics, pharmaceutical industry, trade or the electronics industry, we have already successfully realized projects. Together we will work out ways to optimize your process and material flow in a cost-effective and sustainable way. We can even offer you fully automatic sorting technology or supplementary components such as picking racks or containers. [...]

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 020564, turning length: 2,980 mm, turning diameter: 660 mm, spindle bore: 90 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 2 rpm, total height: 2,000 mm, total length: 6,510 mm, total width: 2,370 mm, quill diameter: 100 mm, quill stroke: 200 mm, swing diameter over cross slide: 400 mm, turning diameter over bed slide: 433 mm, workpiece weight (max.): 2,000 kg, overall weight: 5,300 kg, We are offering our cycle lathe for sale here. This is a bad investment that we never put into operation. * CNC control Siemens 810 D * Automatic 8-position SAUTER turret, tool holder VDI 40 * 3-jaw power chuck, diameter 300 mm * Chip conveyor * 2 steadies * Central lubrication Isdpfx Ajwycnqoacjtn * Mahle changeover filter system

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, turning length: 1,000 mm, turning diameter: 570 mm, quill stroke: 190 mm, bed width: 360 mm, rotational speed (max.): 2,500 rpm, TECHNICAL DETAILS Swing over bed: 570 mm Swing over cross slide: 365 mm Cross slide travel: 345 mm Center height over flat track: 280 mm Bed width: 360 mm Bed slide guide length: 520 mm Cross slide width: 225 mm Cross slide length: 680 mm Turning tool cross-section according to DIN 770 hxb: max. 20 x 20 mm Thread pitch: 01-400 mm Main spindle Spindle head according to DIN 55 027: Gr. 8 Spindle diameter in front bearing: 100 mm Spindle bore: 62 mm Main spindle inner taper: 70 mm Speed range gear stage I: 3–500 rpm Speed range gear stage II: 15–2500 rpm Constant cutting speed: 1–9999 m/min Speed control: 50–120% Load display in % on screen: 0–140% Main drive Three-phase AC motor: 0–120 kW Drive power (60%/100% duty cycle): 19/15 kW Itsdpfx Aaowmck Sjcjn Maximum torque (60%/100% duty cycle): 1,800/1,400 Nm Total speed range: 3–2,500 rpm Number of gear stages: 2 Feed drives Feed range, flat and Longitudinal: 0.01-50 mm/rev Max. feed rate, transverse (rapid traverse): 5 m/min Max. feed rate, longitudinal (rapid traverse): 10 m/min Conventional rapid traverse, longitudinal: 5 m/min Tool holder Number of tool holders: 8 Diameter of the 8 cylindrical shank holders according to DIN 69 880: 30 mm Tailstock Quill diameter: 80 mm Quill stroke: 190 mm Inner taper of the quill: MK 5 Tip angle, normal: 60° MACHINE DETAILS Dimensions (L x W x H): 3.25 x 2.03 x 1.95 m EQUIPMENT - Disk tool turret for 8 tools with VDI 30. - Not for driven tools - Machine manual, technical documentation; - 3-jaw chuck, various tool holders

Year of construction: 2010, condition: used, Conveyor belt, belt conveyor, conveyor belt, belt conveyor, belt conveyor Itedpfsihc Uwox Aacon -Manufacturer: Transnorm, belt conveyor type 1100 -Speed: frequency controlled, up to 83.5 m/min -Drive: SEW-Eurodrive 1.1/0.11 kW, see photo nameplate -Brake: 10 Nm -Belt width: 600 mm -Conveyor length: approx. 7290 mm / approx. 780 mm height adjustable -Set-up dimensions: 7290/860/H340 mm -Transport dimension: 4230/860/H570 mm -Total weight: 358 kg

Condition: ready for operation (used), General Location Outdoor storage Condition used Tank volume 280 liters Max. Overpressure 2.5 bar Floors dished bottom Construction form upright Stand form Feet height adjustable Number of feet 3 pieces Heating/cooling jacket Heating/cooling available Insulation Insulation available Technical data / dimensions Diameter inside 600 mm Diameter outside 780 mm Cylindrical height 1,000 mm Equipment Outlet 32 mm Remarks No guarantee for functionality of double jacket and agitator (was not tested) Material composition Material in contact with product V2A 1.4301 (AISI304) Material feet Stainless steel Agitator Disc agitator Iodoil A D Dspfx Aacjtn

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1511151358, spindle bore: 82 mm, turning length: 1,500 mm, turning diameter over bed slide: 650 mm, spindle speed (min.): 80 rpm, spindle speed (max.): 2,400 rpm, total length: 48,370 mm, total width: 22,450 mm, total height: 20,500 mm, overall weight: 4,300 kg, three-jaw chuck diameter: 400 mm, power: 15 kW (20.39 HP), Good used lathe with FAGOR 8055FL control and tailstock (no lynette) Ijdpfxetpgrpj Aacjtn

Condition: good (used), Year of construction: 1998, Features: Used belt conveyor curve 45 ° transnorm left Condition: Fully functional with traces of use Ideal for fast material transport Professionally dismantled and packed Incl. motor and side guide Feet to be ordered separately Iedpfx Aaedr H Hkjcjtn Colour: white 1 pc in stock Technical data: Mass of the belt conveyor curve 45°. Nominal width approx.: 800 mm Curve angle: approx. 45° degrees Inner radius: 900 mm Belt type: KT 94 Belt conveyor curve Due to the excellent workmanship of the belt conveyor curve, your material glides smoothly to its destination, even under high load. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods, we are your competent partner! We will be pleased to make you an individual offer or advise you on conception or assembly questions. Simply let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of specialists. For companies in a wide range of industries, such as : Logistics, pharmaceutical industry, trade or the electronics industry, we have already successfully implemented projects. Together we will work out ways to optimize your process and material flow in a cost-effective and sustainable way. We can even offer you fully automatic sorting technology or supplementary components such as picking shelves or containers.

Condition: good (used), Schulz roller curve conveyor with 90° drive Manufacturer: Schulz Type: Roller curve conveyor Angle: 90° Roller width: 490 mm Nominal/outer width (NB): 530 mm Inner radius (IR): 1100 mm Number of rollers: 22 conical Rollers Ø conical: approx. 55 ... 80 mm Drive: SEW geared motor Conveyor speed: 0.33 m/s 2 height-adjustable supports Overall dimensions: approx. 1870 x 530 x 800 mm (LxWxH) Further items in other sizes - new and used - can be found in our store! Ijdstzbv Tepfx Aacstn International shipping costs on request!

Operating hours: 20 h, condition: like new (used), functionality: fully functional, input voltage: 380 V, 🧵 CNC-controlled industrial sewing machine – as new with extensive accessories Condition: Like new – only used for one project Application area: Automated sewing of appliqués, straps, technical textiles, leather goods, and more. ✅ Highlights & Equipment Programmable control unit: Intuitive operation via touch panel – ideal for series production and individual patterns Large sewing field: Perfect for large-area appliqués and technical textiles Flexible fixtures with holders: Quickly adaptable for different materials and product shapes Accessories: Extensive package including programming device, clamping fixtures, and more extras Application areas: Industry, automotive, upholstery, straps, leather goods, outdoor products 💡 Advantages High precision and repeat accuracy Reduced setup times due to simple programming Ideal for small to medium series production Future-proof technology for automated production processes 💶 Original price & market comparison Itodjwnw Tkjpfx Aacjn The original price of comparable CNC sewing systems, depending on the manufacturer and features, is between €10,000 and €25,000. If you need more information or require assistance with the sale, I am at your disposal. 📦 Delivery scope Brother BAS-311G sewing machine Programming device Several fixtures with holders

Year of construction: 2001, condition: used, Conveyor belt, belt conveyor, conveyor belt, belt conveyor, belt conveyor -Manufacturer: Transnorm, belt conveyor type TS 1100 -Speed: 20- 91 m/min frequency controlled -Drive: SEW-Eurodrive 0.055/0.55 kW, see photo nameplate -Voltage: 380-500V -Brake: 5 Nm -Belt width: 500 mm Itedpfx Aaeh Dxrtscon -Conveyor length: 1580 mm -Transport dimension: 1600/690/H360 mm -Weight: 114kg

Condition: ready for operation (used), General Manufacturer Bolz Location Bremen Condition Used Tank volume 16,150 liters Max. Max. overpressure 3.2 bar Max. admissible operating temperature 150 °C Vertical design Standing form Feet Number of feet 3 pieces Heating/cooling jacket Heating/cooling available Volume double jacket 1,000.0 liters Max. permissible operating temperature 150 °C Temperature control cylinder double jacket Temperature control underbody double jacket Technical data / dimensions Internal diameter 2,490 mm External diameter 2,580 mm Cylindrical height 2,500 mm Total height 5,000 mm Wall thickness shelves 6 mm Wall thickness cylinder Itsdpfx Aajt Rm Rzjcen

Condition: new, Year of construction: 2017, Transnorm belt curve conveyor left GKF 90°-700-500-IR750 - NEW with STORAGE MARKS (RUST) RA2418 Technical data: Frame width (NB): 700 mm Frame width with Bearing cover and motor: 900 mm belt width (GuB): 500 mm height (BH): 220 mm height with motor (MH): 350 mm Inner radius (IR): 750 mm Itodpfxjw Dwbao Aacen Conveying angle: 90° degrees Conveying speed (v m/s): 0,25 m/s Drive: SEW motor motor Electrical data: 50Hz V380-500, kW 0,55 / S1 Year of construction: 2017 Condition: unused, but has marks from storage, as can be seen in the photos Optionally available: Supports Frequency converter for stepples speed controll Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstreet 11 B & C, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 2023, condition: good (used), functionality: fully functional, Machine used for 1 and a half years, still under 3 months warranty. Panem controlled push of 10 60x80 trolleys with very powerful external silent motor Itedpfjvtxvlex Aacjn

Condition: ready for operation (used), functionality: limited functionality, center width: 2,985 mm, turning diameter over bed slide: 830 mm, quill stroke: 200 mm, quill diameter: 125 mm, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Working range Center width: 2,985 mm Swing diameter over bed: 830 mm Swing diameter over facing slide: 540 mm Travel of the cross slide: 450 mm Displacement of the top support: 250 mm Bed width: 520 mm Face slide width: 280 mm Bed slide guide length: 600 mm Turning tool cross-section: 32 x 32 mm Spindle diameter in the front bearing: 180 mm Spindle holder according to DIN 55027: size 11 Material passage: 130 mm Inner taper of the spindle: metr. 140 Main drive Three-phase motor, infinitely variable Drive power (50/100% ED): 50/37 kW Total speed range: 2 - 1,600 rpm Gear stage I: 2 - 225 rpm Gear stage II: 5 - 559 rpm Gear stage III: 7 - 900 rpm Gear stage IV: 18 - 1,600 rpm Max. Torque at the spindle: 8,750 Nm Speed control: 5 - 200% Load display up to: 125% Feed drive Three-phase servo drives with mechanical safety clutch Longitudinal feed force: 23,880 N Planar feed force: 11,300 N Rapid traverse speed longitudinal/plane: 6.8 / 4 m/min Thread cutting range Longitudinal and taper threads, pitch: 0.001 - 500 mm Tailstock Quill diameter: 125 mm Quill stroke: 200 mm Inner taper: MK 6 Tool equipment Multifix quick-change tool holder: size D Coolant system Pressure: 3 bar Iedeu Hi H Sopfx Aacstn Delivery rate: 40 l/min Machine dimensions Length/width/height: 5,200 x 2,110 x 1,915 mm Machine weight Machine as transport unit: approx. 6,500 kg The FX7002 filter visible in the pictures is not included in the scope of delivery.

Condition: good (used), Year of construction: 2000, turning diameter 340 mm turning length 2000 mm control FAGOR 8055 swing diameter 550 mm spindle bore 108 mm spindle turning speed - stepless 2500 U/min power capacity 16.5 kW quill stroke 220 mm diameter of quill 100 mm total power requirement 19 kW weight of the machine ca. 4300 kg dimensions of the machine ca. 4300 x 1600 x 1800 m This EMCO E 300x2000 cycle lathe is supplied complete with all accessories. Description: - Coolant device - 1 piece Luenette open 20-145mm - 1 piece closed guide 15-185mm - 1 piece face plate - 1 piece three-jaw chuck - 1 piece wedge bar chuck D=400mm - Parat 4-fold tool holder - Various tool holders Iedpevwgpbefx Aacjtn

Condition: used, Diaphragm regulator for regulating valves -Differential pressure controlled membrane regulator: 0.1 - 0.3 bar -suitable for: Kombi 3 Plus Ijdpfx Aed Tqkrjacjtn -Return: DN10 - DN40 -Number: 12x available -Price: per piece -Weight: 0.5 kg