Used Ctx 310 Ecoline for sale (4,310)

Condition: used, Year of construction: 2004, operating hours: 60,425 h, functionality: fully functional, turning length: 1,000 mm, turning diameter over cross slide: 350 mm, TECHNICAL DATA Diameter of rotation: max. 465 mm Length of rotation: 1050 mm Diameter when turning: 680 mm Diameter of the chuck: 325 mm Travel x: 300 mm Travel z: 1050 mm Control: Fanuk Series 21I-TB Speed range: Max 3500 rpm Drive power: 33 kW Torque: max. 630 Nm Diameter of the bearing in the spindle: 120 mm Hfsdpfsv Epzvex Aacjn Max. bar diameter: 90 mm Tailstock stroke: 850 mm Pin stroke: 150 mm Rapid traverse X/Z: 30 m/min Number of tool positions: 12 positions Tool holder: VDI 40

Year of construction: 2013, condition: used, machine/vehicle number: 6012, Etikettiergerät / Labeling machine EcoLine 100-XSR Baujahr / Year 2013 - Serial-No. 6012 Durchlassbreite / bandwidth 100mm Stoppgenauigkeit / stopping accuracy +/- 0.5mm Hedpfxslgz U Sj Aacefn Etikettenlänge / label length min. 10mm Etikettenbreite / label width min. 10mm Innen-Durchmesser Etikettenrolle / Inside diameter of label roll 40/76mm Aussen-Durchmesser Etikettenrolle / Outer diameter of label roll 300mm Netzspannung / Voltage 115/230V, 50/60Hz Leistungsaufnahme / power consumption 400 VA Zertifizierung / Certification CE IP-Schutz IP44 (optional IP54) Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, REX HOMS-310-K Four-sided Planer Year of manufacture: 1980 Serial number: 18.568 Power: 91.69 kW It has not been used since 2021. The machine was stored in a closed production hall for the entire period and is fully functional. After purchasing the machine, the electrical cables were replaced with new ones. We rate the technical condition as very good - visually there are visible traces of use, but technically everything works properly. The reason for the sale is the end of glued wood production. Maximum working width: 305 mm Minimum working width: 50 mm Maximum workpiece height on 2 sides: 310 mm Maximum workpiece height on 4 sides: 160 mm Hfsdpfx Aaewfqh Aecsn Minimum workpiece height: 17 mm driven upper and lower feed rollers

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Hfjdpfx Aaowx Aaqscen Technical specifications will follow The machine was operated in Germany and has been regularly maintained (last maintenance carried out by Homag in 11/2024) The return transport device visible in the pictures is not included in the scope of delivery! Availability: short notice Storage location: Lithuania

Condition: used, Luenette Hfedecrcxtopfx Aacen Height without foot 290 mm Foot width 50 mm Distance 170 mm

Condition: excellent (used), Year of construction: 2005, Connection values: Single phase, AC 50 ... 60 cycles Hfjdpfxsxmhhyj Aacen Voltage switchable 200/220/240 V ± 10 % Power consumption: 110 W Heat emission: 95 kcal/h Application: Form depth 3…12 1/2" // Form width 148…470 mm Paper weight: Single webs 45…170 g/m2 // Multiple sets 125 ... 300 g/m2 Stack height up to ca. 300 mm The machine worked together in production with MICRO-FORMS LABELLER 18S (Sticks labels on sheets) // Ref. No.: 40016.25

Condition: good (used), Year of construction: 1992, functionality: fully functional, double-row line boring machine GANNER with 21 spindles each Hodpfoxlt T Sjx Aacsfn

Condition: like new (used), Year of construction: 2011, operating hours: 250 h, functionality: fully functional, machine/vehicle number: 02573550-060, overall weight: 2,300 kg, fuel type: diesel, tank capacity: 1,740 l, color: light grey, power: 260 kW (353.50 HP), output current: 416 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 231 kW (314.07 HP), continuous power: 210 kW (285.52 HP), rotational speed (max.): 1,500 rpm, type of cooling: water, Used Diesel Generator – Cummins | 352 HP / 263 kW Standby | Enclosed | With Fuel Tank Technical Specifications: Hfjdpfxewzirxj Aacjn Engine Brand: Cummins Engine Model: QSL9-G5 Standby Power: 352 HP / 263 kW at 1800 rpm Prime Power: ~310 HP / 231 kW at 1500 rpm Voltage: 400/231 V Frequency: 50 Hz RPM: 1500 Fuel Type: Diesel Cooling: Liquid-cooled Control Panel: Included Fuel Tank: Integrated base frame fuel tank (visible on photos) Condition: Used – very good visual and operational condition Soundproof Enclosure: Yes Manufacturing Label: Frame code 4A9A145639

Condition: used, mileage: 359,365 km, power: 265 kW (360.30 HP), first registration: 12/2017, fuel type: diesel, number of seats: 37, gearing type: automatic, next inspection (TÜV): 08/2024, emission class: euro6, color: green, brakes: retarder, Equipment: ABS, air conditioning, parking heater, Green environmental badge, Euro VI engine, gearbox type ZF-Ecolife, ABS, ASR, kneeling, retarder, digital tachograph, air conditioning, Webasto additional heating, loudspeaker, air doors at the front and wide middle door, standing places: 54, number of seats: 34 + 1, folding seats 2x, Durofol seats, 1x stroller space, 1x wheelchair space, grab bar, single glazing, wheelchair ramp, Lawo Luminator Matrix, 2x roof hatch, electrically adjustable outside mirrors, vehicle can be covered with advertising and/or labeled Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. Hsdjvnpt Depfx Aacofn We would be happy to make you a financing or leasing offer for this object. Please contact us!

Condition: good (used), Year of construction: 2011, operating hours: 5,498 h, load capacity: 4,000 kg, fuel type: electric, empty load weight: 4,000 kg, mileage: 5,498 km, This electric tow tractor from the Sill brand is from 2011 and is in good condition;Capacity is 4,000 kg;5,498 hours on the counter;Battery is from 2014 and is equipped with an external charger and automatic filling system;watch the video on YouTube Hsdpjv Nq Acjfx Aacsfn

Condition: used, TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine, cooling device, cooling unit -Manufacturer: Cloos, cooling unit for TIG welding machine -Type: unfortunately no type designation -Flow rate: l/min -Quantity: 2x cooling device available -Price per piece -Dimension: 620/310/H235 mm -Weight: 15 kg/pc. Hjdpfjqgi Idsx Aacofn

Condition: excellent (used), TURNING DEVICE FOR PANELS (LONGITUDINAL TO CROSS) Equipment to be placed between two Double End Tenoners (or two double-side Combination machines) in a line (straight position) or before an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) Hedpfxsd Siydo Aacefn To turn at 90° panels (workpieces) from longitudinal sense (lenghtwise) to cross sense (crosswise) Built-in electric and command panel Total length mm 6200 1st Table (longitudinal) with motorized rollers mm 1300 x 3200 (ca.) Motorized turning device, with double cone (1 top + 1 bottom) 2nd Table (cross) with motorized rollers mm 2500 x 3000 (ca.) Min dimensions of the panels mm 195 x 250 Max dimensions of the panels mm 1200 x 2500 Min/Max panels thickness mm 12 - 40 Total installed motor power Kw 3

Condition: used, Year of construction: 1970, functionality: fully functional, type of input current: DC, For sale is an extraction system including pipe system (blue). The system is installed, but will be professionally dismantled and prepared for shipping upon purchase Hfsdevuht Nspfx Aacjn

Condition: used, machine/vehicle number: 19138, Zusammentragmaschine / Collating Machine PLOCKMATIC 310Baujahr / Year 1998 - Serial-No. 310034919 10 Staionen Zusammentragmaschine / 10 Stations Collating Machine Hjdpfxeh Axwzs Aacefn Mit einem angebundenen Rüttler zig/zag / Delivery Jogger with an online zig/zag unit Panel Operation and Controls, Stau / Jamming Doppelbogen- und Fehlbogenkontrolle / double-sheet and no-sheet control Pre-set counter - Full receiving Tray Handnbücher / ManualsElektrischer Anschlusswert / Electrics 230 V - 2 ph Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2009, operating hours: 38,732 h, working width: 3,100 mm, travel distance X-axis: 600 mm, back gauge speed R-axis: 200 mm/s, back gauge travel distance R-axis: 250 mm, pressing force: 130 t, TECHNICAL DETAILS Control: MMC ByBend Working area Bending length: 3100 mm Column clearance: 3200 mm Pressing force: 130 t Working height: 1060 mm Thrust: 250 mm Stroke: 400 mm Installation height: 915 mm Axes & travel paths Controlled axes: Y1 - Y2 - X1 - X2 - R1 - R2 - Z1 - Z2 X-axis travel path: 600 mm X-axis travel speed: 500 mm/s R-axis travel path: 250 mm R-axis travel speed: 200 mm/s Y-retraction: 150 mm/s Hfedpfx Aov E Iu Ujacon Y-working speed: max. 1-10 mm/s Y-rapid traverse: 150 mm/s Back stop: 1200 mm MACHINE DETAILS Machine dimensions (LxWxH): 4440 x 2950 x 3100 mm Machine weight: approx. 13,400 kg EQUIPMENT - Tool holder with hydro cushion (top) and 3-point die holder (bottom) with hydraulic tool clamp - Sliding table for flattening operations - BWS-T protective devices as access protection at the rear (Sick safety curtain) & BWS at the front - Bending aid at the rear (0-75°) with brush inserts, H, A, W axes continuously programmable - Pair of stop fingers (complex) - Side stop for dies - Table extension (station) left for supports - Additional plates for dies V=60 and larger - Additional foot switch for second operator or station - Articulated arm for control Extensive tool package included in delivery

Condition: reconditioned (used), GENERAL CHARACTERISTICS Maximum Infeed grinding length 150 mm Hfjdpfed I Un Iox Aacen Ø Grinding Wheel Dimensions (OD x ID x width) Ø350 x Ø200 x 150 mm Grinding wheel width 150 mm Peripheral Grinding Wheel speed (m/s) 1.700 RPM Regulating wheel speed nº 4 Min/max Regulating wheel speed (r.p.m.) 21, 30, 42, 310 Regulating Wheel Dimensions (OD x ID x width) Ø250 x Ø140 x 150 mm ELECTRICAL CHARACTERISTICS Motor power grinding wheelhead 15 Cv Total Power 16,5 Cv DIMENSIONS AND WEIGHTS High 1.535 mm Long 1.654 mm Weight 1.900 kg Width 1.500 mm

Condition: used, wire electrode, welding wire, welding wire -Gas wire electrode: roll started Hfodjimd Suopfx Aacsn -Type: 310 Ø0.8mm -Number: 2 rolls available -Price: per roll, 1st roll 95,- €, 2nd roll 65,- € -Dimension: Ø 300/100 mm -Weight roll: 9.6 kg / 6.8 kg

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Hfjdpfx Aaeq Nmutscon Numerical Control ICOS CNC (IMAWOP) Max useful working area (without edge banding process) mm 3100 x 2000 x 100 Max useful working area (edge banding process) mm 3100 x 1925 x 60 (panel thickness) No. 6 movable rails (supports) length mm 1400 LED displaying both the axe X and axe Y position Vacuum cups (with No. 1 vacuum pump, capacity 250 m3/h) Safety side metal grids and front emergency carpets No. 1 Vertical Electro-spindle HSK F63 ( Kw 18) Automatic Tools Changing System, with 18 folds (places) No. 14 Independent vertical boring spindles (2 x Kw 1,2) Aggregate Boring Unit, "cross" shape, with 4 horizontal spindles + Circular saw (diam. mm 125) Banding group on board - Glueing Unit (Hot Melt Glue) VT 100 Edge coils supporting unit (No. 2 reels) OPTIONALS: No. 1 Aggregate "FLEX 5" Mod. VARIO NC No. 1 Aggregate Flush Milling / Trimming No. 1 Aggregate Flush-Trimming / Profile Scraping Unit No. 1 Bar Code Reader

Condition: used, Year of construction: 1971, functionality: fully functional, Selling our fully functional screening plant Hfsdsvv N Nhjpfx Aacen

Condition: used, Centerless grinding machine ESTARTA 310 Hedpeq Ehqfofx Aacsfn

Condition: used, Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Clamping plate: with support ribs -Length: 510mm Hjdpfx Aastnlz Rjcofn -Width: 310mm -Height: 65mm -Plate thickness: 27 mm -Weight: 37.7 kg

Condition: used, wire electrode, welding wire, welding wire -Gas wire electrode: roll started Hjdsimd S Hepfx Aacofn -Type: 310 Ø1.0mm -Dimension: Ø 300/100 mm -Weight reel: 13.2 kg

Condition: used, Clamping table, clamping angle, T-slot table, rotary table, milling machine table Hfodsh Rf I Sjpfx Aacen -Clamping angle: for workpiece clamping, with air connection for easy movement (air cushion) -Support surface: 1645 x 250 / 695 x 310 mm -Wall thickness: 30/35 mm -Dimensions: 1645/310/H695 mm -Weight: 239kg

Condition: used, Clamping plate, plate field, grooved plate -Clamping plate: grooved plate Hfodpfx Aashwgd Recon -Length: 310mm -Width: 310mm -Plate height: 65 mm -Weight: 44 kg

Condition: used, Machine vice, vice Hsdpfx Aasb A Sr Hscefn -Jaw width: 250 mm -Back height: approx. 80 mm -Clamping depth: max. 310 mm -Weight: 120 kg