Used Cross Cut Saw for sale (23,953)

Year of construction: 2012, condition: excellent (used), Motor 400 V / 2.4 kW Blsdpfxewu Ikms Adxep Tool diameter 250 mm Tool bore diameter 40 mm

Condition: excellent (used), functionality: fully functional, Tenoning machine with cut-off saw AIRONE Specification: • condition - used, after inspection • manufacturer - AIRONE • machine equipped with a cut-off saw, two heads for giving thickness and a head for milling the processed element • engines - 2.5 and 3 HP Blodpjwmw Aiofx Adxep • disc diameter 250 mm • maximum thickness of the processed element - 60 mm (distance between horizontal heads) • diameter of the tenoning head 250 mm, adjustable up/down • hand-pushed trolley with mechanical pressure • original painting • weight approx. 500 kg • dimensions 150 x 100 x 120 cm (length x width x height) Additional information: • the photos presented show the actual condition of the item for sale • possibility of switching on and checking the device on site.

Condition: new, Year of construction: 2025, Upgrade your aluminium production to a high-technology, high-efficiency, high-safety saw. X45 is an advanced high-accuracy up-cut saw for small-profile cutting of straight or mitered aluminium parts up to ±85°. Two-hand button-press cutting with full saw guarding (including tunnels on each side) preventing access to the cutting area. Category 3 safety design with a dual-channel safety relay and a reset button. Electronically settable up-stroke point to any position (without a sensor) for shortest cutting distance. Advanced chip collection design with up to 94% chip collection efficiency and up to 8× less chips to clean from your saw / floor compared to traditional saws. • Ø450 mm TCT saw blade with powerful 3.0 kW drive motor • Ergonomic usage design with blade changed from the front of the machine • AS / NZS 4024:2014 Category 3 safety standard, with safety relay and two-hand cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up Bledpfx Asv Iccfodxop • Electronic lockout of the blade / machinery panels preventing access to rotating assemblies also during spin-down. • Safety switch detection of opening of the access panels triggering an e-stop. • 2× vertical and 2× horizontal clamps with adjustable clamp pressures. • Adjustable saw mitre angle to ±85° • Moveable back fence for increased cutting capacity • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm points for chip collection • Optional 3.8 kW vacuum chip extractor

Condition: refurbished (used), C11 MKL Cross-Cut Optimization Line, offered by Wood Expert Industry, is a state-of-the-art technological solution designed specifically for industrial wood processing and operational workflow optimization in woodworking facilities. All equipment comprising the processing line is manufactured by Paul Germany and was completely overhauled in July 2025 with zero operating hours. Paul C11 MKL Lumber Optimization Line Components Blsdpfx Adow Emf Rsxsp - 9.0 m / 230 mm Inclined Conveyor Belt Ideal for the automatic and efficient handling of wood pieces towards the processing area, equipped with a guided belt and robust clamping parts for stable transport. - Measuring Station with Luminescent Scanner and Photocell Allows precise identification of the start and end of workpieces, featuring dedicated lower rollers for high-accuracy measurements. - Pressure Roller Unit Ensures correct alignment and pressing of pieces between 250 and 4200 mm, with manual adjustment available according to the material thickness. - Reinforced Marking Rails, Left and Right Automatically pre-marks cutting positions for increased efficiency and accuracy in subsequent processing. - C11 MKL Optimizer – CNC Cross-Cut Saw Station Includes a robust welded steel frame, 500 mm TCT blade, 5.5 kW servo-driven motor, variable speed, and an advanced feeding system with lower/upper rollers for precise piece guidance. Electric adjustment of the upper rollers allows automatic adaptation to wood thickness. The system features automatic waste extraction, extraction ports, CE safety compliance, and advanced cutting quality options (blade with 132 conical teeth). - Waste Extraction System Comprises an 11.5 m / 230 mm conveyor belt and ascending waste belt (3.0 m / 500 mm with collection hopper), optimizing material flow and disposal of residues. - Length Sorting System With pneumatic ejectors and basic sorting equipment, this facilitates automatic organization and discharge of pieces to two outfeed positions, increasing line productivity. - Maxi8 Premium Operator Terminal and Optimization Software 17” touchscreen terminal, dust-protected, remote diagnostics, Linux-based, with dedicated optimization software (up to 60 cutting lists, 9 grading options, 400 preset lengths/list), advanced statistics, network integration capability. Includes data import/export options via USB. - Control and Automation Equipment Standardized electric cabinets, control panels, complete installation and wiring performed with high-quality components for intensive industrial use. Benefits of integrating this line: - Fully automated cross-cutting process, significantly reducing human error. - Increased efficiency and yield through cutting list optimization and automatic length sorting. - Adaptability to various thicknesses and sizes of workpieces. - Advanced digital control and remote diagnostics for quick interventions. - High reliability, reduced maintenance costs, and adherence to strict CE safety standards. This optimization line can be customized for different types of wood processing facilities, ensuring efficient operation tailored to every client’s requirements.

Condition: new, Year of construction: 2024, Automatic length measuring and positioning system for all STROMAB crosscut saws, as well as similar machines from other manufacturers. It serves both as a stop and for workpiece positioning. Consists of: Aluminium profile 105 x 90 mm, anodized Toothed belt drive 32 mm, reinforced with steel wire Stepper motor 6 Nm, multi-voltage 115 - 230 V, 50/60 Hz Repeatability +/- 0.1 mm Positioning speed 60 m/min SMART 7 Control Unit with 7-inch touch screen Absolute and incremental processing mode 8 pre-set standard values 2 software versions with different optimization levels available optionally. ZM 415 – Usable working length 4,500 mm ZA333 – Roller table 4,500 x 280 mm, RD 32 mm ZA341 – Front support 4,500 x 260 mm Bedpfx Adoxraucexjlp ZA373 – Locking cable for customer’s own crosscut saw

Condition: good (used), Year of construction: 2004, Ma.-No. 04126, pneumatic, speed 2,900 rpm, saw blade Ø 450-550 mm, working height 800 mm, electric power 5.5 kW +++ Attention: Machine is part of an online auction! +++ Bodpfext Nwpsx Adxolp

Condition: used, Year of construction: 1989, - Year: 1989 - Documentation available: No - Serial number: 106 Bsdoxaniwopfx Adxslp - Max. cutting height [mm]: 80 - Max. saw blade diameter [mm]: 350 - Max. spindle speed [rpm]: 3700 - Voltage [V]: 380 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Crosscut saw, pull saw, miter saw, plunge saw -Remark: Unit made of slats/blinds production, without control Bsdpfxep Dydqs Adxolp -Saw blade: Ø 188 mm -Individual components: see photos -Dimensions: 1390/620/H1130 mm -Weight: 576 kg

Condition: used, Year of construction: 2014, This Graule crosscut and mitre saw with roller conveyor and TigerStop, type: ZS200, will be auctioned online in our industrial/machinery auction - site closure Holzbau Hahn - Hundegger joinery line - woodworking machines - commercial vehicles - tools - material - containers - racks. Blodpfsxqv Ngex Adxjp

Condition: new, Year of construction: 2025, Mobile chop station with extremely robust base, ready assembled and ready for use. Included special equipment: - Machine tiltable on both sides from the front - Circular saw blade HM 520x50 Z60 W neg. - Undercarriage mobile, especially stable Data of the machine: - especially due to constant zero point good when using measuring equipment and stop systems (miter and tilt!) - Powerful three-phase motor 5 kW with automatic Star-delta starting - stable guide arm with 4 ball bushings for precise and safe preference - swiveling left 45 ° (miter) - swiveling right 65 ° (miter) - Tilt left 60 °, right 30 ° - Cutting width at 90 ° 420 mm - Cutting width for miter 45 ° 295 mm - Cutting height vertical 200 mm - Cutting height at inclination 45 ° 140 mm - Cutting height at inclination 60 ° 80 mm - for saw blade 520x50 mm - Suction nozzle 100 mm - Weight with stand 300 kg - CE and GS signs. dust tested - German quality product Data base: Extremely stable frame construction from large dimensioned profiles, powder-coated, sturdy steel carrying rollers with ball bearing high wall thickness galv. galvanized, sustainable Double-stop swivel castors with PU tread, easy to move Roll width 450 mm Conditions about threaded spindles adjustable 1500 mm roller conveyor per side 2750 mm stop length per side Total length 5990 mm Stiff profile heavily ribbed 100x50 mm Anodised aluminum (extendable as option) 1 hinged stop right and left Measuring tape right and left Bledpsb Nrg Ujfx Adxep

Condition: new, Year of construction: 2025, crosscut and miter saw type: ZS 200 N - 5 KW motor with machine stand, but without saw blade Machine via handwheel and worm gear (rear) Bsdpji Dfidefx Adxolp Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake u. Automat. Star delta motor control cutting width at 90deg: 420 mm cutting width at 45deg: swivelled: 295 mm Cutting height at 90deg: 200 mm Cutting height at 45deg tilted: 140 mm Saw can be tilted on one side up to approx. 25 degrees to acute angles and tilted flat to the left up to 30 degrees Machine stitched: approx. 250 kg Location: ex stock 54634 Bitburg - immediately available -

Condition: new, A heavy duty German built radial arm crosscut saw with swivel and tilting capability and a large cutting capacity of up to 200mm deep. A unique feature on this model of machine is that when angle cutting is required the saw unit pivots about a central point thus always maintaining the same cutting length. Both optional vertical (tilting) and standard horizontal (swivel) angles can be adjusted manually with either graduated scales or with an optional digital display unit for reading the position. The saw is also available with an optional automatic NC positioning system with 4 memorised pre set positions. The machine is ideally suited for easy and accurate cutting of compound angles for furniture and joinery components. The machine can be specified to cut wood, aluminium, plastics or composite materials. Precision ball bearing movement on hardened steel runners. Sturdy cast iron construction with steel base stand Heavy duty 5 KW motor. Spring return of saw carriage. 1 x 520mm dia TCT x 4.4mm kerf x 50mm bore - 60 teeth WZ saw alternate bevel. 50mm spindle diameter. 22 - 90 - 45 horizontal movement. (Swivel) 30 - 90 - 60 vertical movement. (Tilt - optional N model) Adjustable upper protection. 520mm TCT sawblade Z60. Bsdpfxsdy Hm Ns Adxjlp Cutting Capacity: 420 wide x 200mm deep at 90 degrees. 295 wide x 200mm deep at 45 degrees. 420 wide x 140mm deep at 45 degrees. (Tilt- optional N model). Dust extraction outlet 100mm. Working height of table 900mm

Condition: used, Year of construction: 1973, With a left-hand circular saw that can be swiveled to 45°. Cutting size: 2200 x 2500 mm. 3 motors, each with 4.5 kW. Both cross-cut saws can be swiveled to 45° - 90°, each with a scoring motor. All three saws can be driven up to 400 mm in diameter. Minimum cutting width: 210 mm. Both scoring saws are pneumatically displaced forward and backward. With vacuum suction cups for panel securing. Bljdpfx Aovvkm Iedxjp Storage location: Nattheim

Condition: excellent (used), Catalogue number 7786 TECHNICAL DATA - max. blade diameter: 350mm - blade bore diameter: 30mm - pneumatic blade up/down movement - max. cutting board width: 240mm/30mm - max. cutting height with 350mm blade (centre): 70mm - table size (LxW): 660x600mm - motor: 3.5kW - extraction port diameter: 80mm - feeding table: 1250mm - outfeed table + guide + stop: 2000mm - feeding/outfeed table roller width: 150mm - machine dimensions (without tables) LxW×H: 800x800x1420mm - weight: 250kg ADVANTAGES – German-made – suitable for cutting boards up to 240mm wide – includes feeding and outfeed tables – very good condition – used saw Net price: 10,900 PLN Net price: 2,600 EUR Net price calculated at exchange rate 4.2 PLN/EUR Bledpfjxt Ingox Adxop (In case of significant exchange rate fluctuations, the price may change)

Condition: used, - 2250 mm Cutting width - 80 mm cutting height Bledpfx Ashkm A Nsdxop - 2x 3,7 KW saw motors

Condition: used, Year of construction: 1980, Maximum cutting width: 4500 mm Bodpfxsw E D E Us Adxjlp Connected load: 9.37 kW

Year of construction: 2004, condition: excellent (used), Dimter optimization crosscut saw 350 with elevation AH 1400 mm crosscut see picture crosscut saw control cabinet Scanner interface sorting 6500 mm long 3 pushers Waste flap Machine is already dismantled and immediately available Machine ran without problems until dismantling Bljdpencc Icsfx Adxep Transport can be organized

Condition: used, Year of construction: 2022, Heavy duty rack and pinion push feed system 6000 mm in feed capacity Ø600 saw blade 10 hp saw motor Automatic angle setting (+70 - 70 degrees ) Vertical Clamping Horizontal clamping Electrically interlocked safety hood Touch screen controller 12" colour display Bedpjw Tar Eofx Adxjlp Full optimisation 1000 mm out feed table

Condition: good (used), Year of construction: 1997, Under-table cross-cut saw max. cutting width: 800 mm Blodjxtwk Dspfx Adxjp max. cutting height: approx. 150 mm saw blade: 550 mm with 2 roller conveyors, the right one with stop and measuring scale

Condition: excellent (used), Catalogue number 7386 TECHNICAL DATA - max. saw blade diameter: 500mm - spindle diameter: 30mm - hydraulic clamp serves as blade guard - hydraulic blade stroke - max. cutting width: 550mm - 4 sliding rollers in the table Bsdpfx Aot E Silodxslp - top feed roller, toothed and pressure type - max. cutting height (in the centre): 100mm - main motor: 5.9 kW - extraction port diameter: 100mm, 120mm - table dimensions: 700x630mm - table height from base: 830mm - infeed roller table - roller diameter: 350mm table size: - length/width: 4480x700mm - motor: 0.75kW - outfeed table (belt) - belt width: 510mm table size: - length/width: 3130x800mm - motor: 0.75kW - machine dimensions (L/W/H): 890x910x1200mm - total weight approx.: 900kg – Infeed and outfeed table – Hydraulically adjustable blade – Used saw, in very good condition Net price: 24,900 PLN Net price: 5,930 EUR based on 4.2 EUR rate (Prices may vary with greater fluctuations)

Condition: used, Hüllhorst DH54S Machine number: 03974 Circular saw drive: a) 2 motors: 5 HP each b) Speed: 3000 rpm c) Circular saw diameter: 400 mm d) Circular saw blade thickness: 2.6 mm e) Circular saw bore: 35 mm Working range: Bodsxrzfvopfx Adxslp a) Standard machine: 2200 mm cutting depth and 2200 mm cutting width b) Custom cutting depth: up to 2500 mm c) Custom cutting width: up to 3000 mm d) Minimum cutting width: 210 mm e) Maximum cutting height: 100 mm

Condition: excellent (used), Year of construction: 1994, TECHNICAL DATA - Max. disc diameter: 300 mm - Spindle diameter: 30 mm - Blade guards: 2 units - Pneumatic cutting (saw blade movement up/down) Bodpfxoxrl Rij Adxslp - Saw units adjustable to a 45° angle - Manual adjustment of the saw unit spacing - Min. cutting length at 90°: 220 mm - Max. cutting length at 90°: 2,820 mm - Cutting width: 110 mm - Cutting height at 90 degrees: 90 mm - Pneumatic clamping devices: 2 units - Foot switch control - Material support - Main motor: 2×1.6 kW - Dimensions (L/W/H): 3,620×1,100×1,250 mm - Weight: approx. 500 kg – Unpainted – Swiveling saw units – Used saw, in very good condition

Year of construction: 2001, condition: used, Multiple crosscut saw Bljdpfxjiw El Ue Adxep with 4 saws

Condition: used, Hydr. hacksaw KASTO HBS 210 / 240 Machine no. No. 1116 145 220 Year of construction 1994 Sawing range at 90° round 210 mm flat 240 x 190 mm square 210 x 210 mm at 45° round 150 mm Saw blade length 400 mm Number of strokes 62 / 125 strokes per min. Material support height 500 mm Bodpfx Aouqgbtjdxelp Motor power 0.5 / 0.75 kW Mains connection 400 Volt, 50 Hz - Drive motor with 2 speeds - Coolant pump in the machine base frame Space requirement L x W x H 1200 x 500 x 1200 mm Weight 170 kg Good condition

Condition: excellent (used), CATALOG NUMBER 7181 TECHNICAL DATA - max disc diameter: 300mm - disc bore diameter: 30mm - disc guard - max cutting height: 100mm - max cutting width: 700mm - possibility of angle cutting in the vertical plane +90°/-90° (arm travel or disc travel) - possibility to rotate arm right/left - motor: 2.2kW - table size: 950x700mm - extraction port diameter: 60mm - dimensions (LxWxH): 1200x950x1400mm - weight: 155kg ADVANTAGES – manufactured in Italy – not repainted – very good condition – used saw Net price: 6500 PLN Bledoqffrcjpfx Adxop Net price: 1550 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (with larger exchange rate fluctuations the price may change)