Paper Cross Cutting Machine

Strecker-Bruderhaus KBI

Condition: ready for operation (used), Year of construction: 1985, max web width 1900 mm Lhjdpfsw Nvkijx Abyjn

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 4633, total width: 1,800 mm, total length: 10,000 mm, total height: 2,140 mm, Working machine in exellent condition from German production Lhsdpfxjzhk Avs Abysn System consists of 1 x Honsel type: F13, serial number: 4633 1 x Fischer & Kreck, type Combi C/11B Production speed of 180 pieces per minute and runs with a voltage of 400 V. Overall dimensions: approx. 1000 x 180 x 214 cm (L/W/H) including 1 x Gluematick type: GHK, 1 x cabinet with contents and accessories

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, paper width (max.): 1,800 mm, Unwind diameter: 1,000 mm Rewind diameter: 800 mm Max. speed: 400 m/min Friction shafts for 3 and 6 inch Hydraulic lift at the unwind station Splicing table Web edge control Tidland knife holders, 20 pieces Lsdpfx Absywl D Neyshn Semi-automatic knife setting system from Tidland Recipe management Laser positioning We will also dismantle and load the machine onto a truck or sea container at our own expense.

Condition: ready for operation (used), Year of construction: 2016, A complete SML winder including core magazine is available. Infeed part roll width: 2600mm, max. film end width: 2350mm, winding shafts: 6/3 inch, max. mechanical speed: 250m/min, max. roll diameter: 980mm, film thickness range: 15µm-2500µm, core diameter: 3 inch, core type: cardboard/plastic, roll change time: 4min, deposit capacity 2nd table: 15 rolls, power requirement: 52kW, edge trimming: In-Line, Knife type: free cut with razor blade, Winder mode: gap/contact, Roll delivery: 3-axis robot. Including non-stick rollers, linear guide, scale, robot and core magazine. Documentation available. On-site inspection is possible. Lhsdpfx Asvripyebyjn

Condition: used, Year of construction: 2014, Material: PET aluminum-metallized film Material thickness: 9–50 μm Web width: 500–2000 mm Roll width: 2100 mm Web diameter (unwind): max. φ1150 mm Web weight (unwind): max. 1500 kg Product winding diameter: • φ600 mm (3” friction shaft) • φ750 mm (6” air shaft) Winding shaft load: max. 500 kg/shaft (center-supported) Core dimensions: • Web core: 3” (φ76.2–76.5 mm), 6” (φ152.4– 153 mm) • Product core width: 100–1050 mm Slit width: 200–1950 mm (up to 5 slits) Machine speed: max. 400 m/min Typical operating speed: 200–250 m/min Unwinding tension: • 50–500 N (φ650 mm or less) 1. Unwinding Section • Shaftless single-axis fixed unwind • Direction: upward or downward • Automatic tension control with feedback detector Lodpfx Absx Ez Umeyehn • Dancer roll included • Core clamping: rotary mechanical chuck • Core sizes: 3” standard, 6” via adapter • Web alignment: manual ±5 mm, automatic ±100 mm 2. Main Drive Rollers • Multiple rollers with specified diameters and surface finishes • Nip and touch rollers with pneumatic pressure control 3. Slitting Mechanism • Upper/lower NC shear cutter • Number of blade units: 6 upper + 6 lower • Slit width adjustment via touch panel • Accuracy: ±0.1–0.2 mm • Dust suction: upper blade nozzles + lower blade suction • Optional razor cutter (manual adjustment) 4. Mini Winder Placement: below slitter Units: 2 (left / right) Drive: AC servo motor Tension: dancer roll control Traverse width: 300 mm Winding diameter: φ500 mm 5. Winding Section • Duplex center drive • 3” air friction shaft + 6” air shaft • Automatic tension control linked to winding diameter • Touch roll with pressure control • Core positioning via collar bar 6. Product Discharge • Hydraulic lift tray • Motorized slide-out with tilt mechanism Electrical & control: Line motor: 7.5 kW AC servo Winding motor: 11 kW AC induction Unwinding motor: 11 kW AC servo Static eliminators: 5 units (Keyence SJ-HA) Control panels: main panel, winding panel, unwind panel, mini winder panel, auxiliary panel PLC: Fuji Electric Utilities, dimensions & environment: Power supply: AC 200 V, 60 Hz, 3-phase Power consumption: 70 kVA Air supply: 0.5 MPa, 500 L/min (dry air) Machine weight: approx. 12 tons Paint color: urethane coating (E-31872) Installation environment: cleanroom Class 10,000 Floor load capacity requirement: ≥ 2 ton/m²

Year of construction: 2021, condition: excellent (used), machine/vehicle number: 29092021, T-503 PAPER SLITTER REWINDER MACHINE GENERAL INFORMATIONS: Machine weight : ≈ 2000 kg Number of Knives : 12 Units Bobbin Loading Stand : Yes Lodpfoy Twcisx Abyjhn Air Shafts : Yes Tension Control System : Yes Brake System : Yes Speed Control System : Yes Trucker motor power : 5,5 KW Top rewind motor power: 7,5 KW Bottom rewind motor power : 7,5 KW Unwind: 1250mm Rewinder: 920 mm Width: 1200 mm

Year of construction: 1995, condition: ready for operation (used), functionality: fully functional, working width: 1,450 mm, mount diameter: 800 mm, number of feed rollers: 2, section length (max.): 1,560 mm, The machine is equipped with 2 unwinding stations, allowing you to process double the quantity of cut lengths simultaneously. The machine speed is 50 m per minute. In the longitudinal direction, 3 knives can be set, enabling the width to be halved and a trim to be cut off on each side. The unwinding station is equipped with 3-inch and 6-inch pneumatic expanding shafts. We have successfully processed BO PET films with thicknesses ranging from 36 to 250 microns. The machine is fully connected, can be inspected daily, and, by arrangement, customer material can also be tested. We would disassemble and load the machine, either onto a truck or into a container. Lhsdpfx Asy D Edcebyjn

Condition: good (used), functionality: fully functional, Used slitter rewinder Goebel 2 shafts on unwinder Lhsdpfxsyqx Dnj Abysn max diameter on unwinder - 650 mm max web widght - 2200 mm

Condition: used, functionality: fully functional, working range: 2,320 mm, Slitter rewinder Goebel web widht - 2320 mm Lhsdpfsypua Asx Abyjn rotary mechanism at the receiving station

Condition: used, Year of construction: 2005, functionality: fully functional, overall weight: 2,000 kg, The machine cuts A4 or A3 formats into sets of 100 or 200 sheets and simultaneously packs this quantity into slip lid boxes, so that the operator only needs to close and seal the lid. Ideal for materials such as photo paper, inkjet films, and all desktop products distributed in A4 boxes for the home office. Max. master roll width: 1280 mm. The machine is fully functional and connected. Test cutting is possible at any time. We also handle professional dismantling and loading onto a truck/container. Lhsdjxvrm Sopfx Abyon