Used Counter for sale (2,499)

Condition: used, Year of construction: 2011, turning length 1500 mm control SINUMERIK 828D centre height 270 mm greates pass round over bed 540 mm swing diameter over slide rest 310 mm bed width 350 mm max. workpiece weight 1500 kg spindle bore 85 mm turning speeds 27 - 2250 U/min main drive DC 11 kW MACHINE EQUIPMENT: - AME chip conveyor - Lynette - Heavy grey cast iron bed for optimum damping and reduced tool wear - Inductively hardened and parallel synchronised bed guides - Counter guides completely Turcite-coated and hand-scraped Kedpfx Adexyaf Rsqodr - Hardened and ground ball screws - Thermosymmetrical headstock - Main drive 11 kW - Infinitely variable speed range 27-2250 rpm with 3-stage gearbox

Condition: used, Year of construction: 1970, diameter / mm Cutting (quantity) / weight / kg This tailstock comes from the Froriep D1.050x10.000 crankshaft lathe. This is sold individually and can be used for various purposes Can be used, for example as a counter spindle or for other purposes. Ksdpfx Adotnmmbjqjdr Center height: 500 mm

Condition: used, 3 axis counter digital display ND 780 The digital display is in good condition Type: DN 780 ID No.: 520 010-01 Kdjdpeylcvwefx Adqsr S.No. 57 587 193 G V6

Condition: used, Year of construction: 2011, Perfect binding line Kolbus KM 412.B Year: 2011 Consisting of Book block feeder Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Description: - Hand feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element - Intermediate element with vibrating - Transfer into the binder Perfect binder Kolbus KM 412.B Year: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Gauzing station Kedpfx Asxuad Asdqedr - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Product counter: 148 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Book stacker Kolbus (RIMA) XRS 130 Year: 2011 Description: - Compensating stacker - Delivery to the left and right Optional availabe: (not included in pricing) Kolbus card Gluer - KK 841 - 2011 Kolbus cold glue spine glue unit - 2011 Description updated: 9-4-2026

Condition: used, Year of construction: 2015, functionality: fully functional, Model: OKUMA MULTUS U3000 2SW 1500 (CNC turning and milling center) Control: OKUMA OSP-P300S Turning length: approx. 1,500 mm Max. turning diameter: up to 650 mm Tool system / interface: HSK-A63 Main spindle: Ksdpfjzu I U Aox Adqjdr Drive power: 22 kW Torque: 427 Nm Max. speed: 5,000 rpm (2 gear stages) Spindle nose: Short taper size 6 Spindle front bearing: Ø 120 mm Spindle bore: Ø 80 mm 3. Counter spindle (Okuma motor spindle) Travel: Traversable on the W-axis Drive power: 22 kW Torque: 427 Nm Max. speed: 5,000 rpm Spindle nose: Short taper size 6 Spindle front bearing: Ø 100 mm Spindle bore: Ø 62 mm Tool spindle / Milling spindle (Okuma motor spindle) Drive power: 22 kW Torque: 120 Nm Max. speed: 12,000 rpm Tool holder: HSK-A63 Axes & Travel Ranges C-axis: 360° (Indexing / Positioning in 0.001° increments) Y-axis: Stroke +125 mm / -125 mm (Total stroke 250 mm) B-axis: 240° (Indexing / Positioning in 0.001° increments) Tool magazine & Turret Tool Magazine (ATC): 120 positions Lower turret: 12 stations with direct mounting system "radial" Turret guides: ZB-axis with cylindrical roller linear guide XB-axis with slide guide Coolant supply / Internal coolant supply (ICS): max. 20 bar (including bag filter) External cooling for tool spindle: max. 8 bar Accessories: Short loader LNS Quick Load Seri O III

Condition: ready for operation (used), Year of construction: 2021, spindle motor power: 22,000 W, spindle speed (max.): 4,200 rpm, travel distance X-axis: 325 mm, travel distance Z-axis: 840 mm, total height: 2,300 mm, total width: 2,140 mm, overall weight: 6,200 kg, controller manufacturer: FANUC, controller model: 32i-B, product length (max.): 3,000 mm, number of axes: 6, This 6-axis Takisawa TS-4000YS was manufactured in 2021. It features a maximum swing diameter of Ø 600 mm and a turning diameter of Ø 370 mm with a length of 750 mm. The machine includes a powerful 22 kW main motor and a counter spindle with a speed of 6000 rpm. If you are looking to get high-quality turning capabilities, consider the Takisawa TS-4000YS turn-mill centre we have for sale. Contact us for further details. • Capacity: • Max. swing diameter: Ø 600 mm • Max. turning diameter x length: Ø 370 x 750 mm • Bar capacity: Ø 82 mm • Main spindle: • Spindle centerline height from floor: 1140 mm • Bearing/bore diameter: Ø 140 / Ø 90 mm • Spindle nose: A2-8 • C-axis resolution: 0,001° • Counter spindle (Included): • Spindle centerline height from floor: 1140 mm • Bearing/bore diameter: Ø 90 / Ø 53 mm • Spindle nose: F-140 • Speed: 6000 rpm (1/min) • C-axis resolution: 0,001° • Strokes: • Y: -50 ~ +70 mm • A: 780 mm • Rapid traverses: • X: 30 m/min • Z: 30 m/min • Y: 10 m/min • A: 30 m/min • Power: • Main spindle motor (30 min. / 100% ED): AC 22 / 15 kW • Max. torque (main spindle): 618 Nm (S3 25%) • Counter spindle motor (30 min. / 100% ED): AC 11 / 7,5 kW • Max. torque (counter spindle): 175 Nm (S3 25%) • Driven tools (Included): • Turret stations: 12 pcs • Max. speed: 6000 rpm (1/min) Kdedpfxozu S Ake Adqsr • Drive power (S3 25% / 100% ED): 7,5 / 3,7 kW • Max. torque: 48 Nm • Tooling: • Tool shank cross-section: 25 x 25 mm • Boring bar diameter: Ø 50 mm • Control: CNC path control FANUC 32i-B Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2001, operating hours: 29,173 h, functionality: fully functional, machine/vehicle number: 11045522744, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, controller model: HEIDENHAIN MILLPLUS, spindle speed (max.): 18,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid commits you to collecting the item promptly between October 7, 2026, and October 14, 2026! TECHNICAL DETAILS Travel range X-axis: 500 mm Travel range Y-axis: 420 mm Travel range Z-axis: 380 mm Rapid traverse rate X-axis: 50 m/min Rapid traverse rate Y-axis: 50 m/min Rapid traverse rate Z-axis: 50 m/min Feed rate X-axis: 20 m/min Feed rate Y-axis: 20 m/min Feed rate Z-axis: 20 m/min Spindle speed: 18,000 rpm Torque: 1,100 Nm Tool holder: SK 40 Holder diameter: 40 mm Number of tool positions: 32 Max. tool length from spindle nose: 280 mm Max. tool weight with automatic tool changer: 6 kg Max. total weight of tools in magazine: 90 kg Table length: 500 mm Table width: 380 mm Max. workpiece weight: 330 kg Clamping area: 500 × 380 mm Distance between T-slots: 63 mm T-slot width: 4 H7 Centering bore diameter: 30 H6 Max. table rotation speed: 33 rpm Max. swivel torque: 1,400 Nm Swivel speed: 26 rpm Linear scale resolution X/Y/Z: 0.001 mm Positioning tolerance: 0.010 mm MACHINE DETAILS Control system: HEIDENHAIN MILLPLUS Rated apparent power: 40 kVA Input voltage: 400 V Kdjdpszu Ixnefx Adqsr Input frequency: 50 Hz Input current: 80 A Dimensions and weight Dimensions (L x W x H): 3,500 x 2,400 x 2,500 mm Total weight: 7,000 kg Operating hours Counter 1: 80,842 h Counter 2: 29,173 h EQUIPMENT NC rotary table with swivel axis

Condition: ready for operation (used), Year of construction: 2000, operating hours: 32,000 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 430, overall weight: 4,900 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 13,000 W, number of slots in tool magazine: 24, number of axes: 3, This 3-axis DECKEL MAHO DMC 103 V was manufactured in 2000. It features a travel range of 1000 mm in the X-axis, 600 mm in the Y-axis, and 600 mm in the Z-axis. The machine includes a vertical tool changer with 24 stations and a maximum permissible load of 800 kg. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 103 V vertical machining centre we have for sale. Contact us for further details. Kdodpfozu Nygox Adqsr - Rapid Traverse (X/Y/Z): 30 m/min- Max. Permissible Load: 800 kg- Tool Changer: Vertical tool changer with 24 stations- Machine Weight: approx. 4,900 kg- Main Drive: Speed-controlled asynchronous motor 9/13 kW- Electrical Specifications: 400 V, 3+PE~, 50/60 Hz, 50 A, 30 kVA, Control voltage 230 V / 24 V=- Operating Hours: approx. 32,000 operational hours (cabinet counter reads 054888 h)- Included / Additional Equipment: Chip conveyor, dividing head with counterholder (4th axis, currently disconnected)- Operational Condition: Configured for 4 axes; 4th axis power unit failed/disconnected; operated as 3-axis machine until end of 2021; out of service and available immediately

Year of construction: 2010, operating hours: 21,431 h, condition: ready for operation (used), controller manufacturer: SIEMENS, number of axes: 3, This 3-axis PERO V4 / 024 – Ex 7031 was manufactured in 2010. It features a maximum load capacity of 650 kg and a total heating capacity of 65 / 6.6 kW. The machine is equipped with a Siemens SIMATIC Panel Touch Screen Control for ease of operation. If you are looking to get high-quality cleaning system capabilities, consider the PERO V4 / 024 – Ex 7031 cleaning system we have for sale. Contact us for further details. Machine description: Cleaning System - Operating Voltage: 400 V- Frequency: 50 Hz- Nominal Current: 121 A- Total Heating Capacity: 65 / 6,6 kW- Estimated Current Operating Hours: ~26,000 h (Status July 2026: 25,705 h logged on panel)- Working Hours: 21,431 h (Logged on panel)- Total Batch Counter: 69,216- Daily Batch Counter: 175- Vacuum Pump Service Counter: 366 h- Maximum Load Capacity: 650 kg- Cleaning Medium: Perchloroethylene (PER)- Control System: Siemens SIMATIC Panel Touch Screen ControlA very comprehensive spare parts package is available Kedpfxjzimxvo Adqodr

Condition: used, Year of construction: 1997, Profiling line, consisting of DEP Gabbiani + Weinig planing machine DEP Manufacturer: Gabbiani Type: T-Module 80/1600 Year of manufacture: 1997 Planing machine Manufacturer: Weinig Type: 22 BL Year of manufacture: 1995 Technical data of the DEP - 6 machining motors per side - 2 fixed scoring units, 3.2 HP / 3000 + 4500 RPM - 2 chip-removing units: 12.5 HP / 3000 + 4500 RPM - 2 chip-removing units: 12.5 HP / 3000 + 4500 RPM - 2 slotting units: 12.5 HP / 3000 + 4500 RPM - 2 free spaces - 1 feed motor: 4 HP / 1400 RPM Angle transfer between DEP and planing machine - Length: 290 - 1600 mm (1800 mm) - Width: 18 - 150 mm - Thickness: 5.5 - 50 mm - Density: 600 kg/m³ - Output max.: 150 workpieces/min - Belt conveyor after the double-end profiler - Toothed belt conveyor with brush attachment as counter holder - Cam conveyor for singulation - Toothed belt conveyor as buffer section - Longitudinal discharge - Roller conveyor before the planing machine - Control: Vipa, compatible with Siemens S7 300 - Safety technology Protective door switches: 3 Safety light barriers: 1 Technical data of the planing machine Working width and working height - Working width: 20 - 230 mm (with tool diameter 125 mm) - Working height: 9 - 140 mm (with tool diameter 125 mm) Infeed table - Length: 2000 mm - Adjustment range of the jointer table: 10 mm - Adjustment range of the fence: 10 mm Surfacing table - Length: 1200 mm - Adjustment range of the table: 10 mm - Adjustment range of the fence: 10 mm Jointer spindle - Motor power: 5.5 - 15 kW Thicknessing spindle - Motor power: 5.5 - 11 kW Left spindle - Motor power: 5.5 - 11 kW 2. Right spindle - Motor power: 5.5 - 11 kW Top spindle - Motor power: 5.5 - 22 kW Kdjdpezuzfbjfx Adqsr Bottom spindle - Motor power: 5.5 - 22 kW Universal spindle - Motor power: 5.5 - 11 kW Feed - Cardan feed, continuously adjustable: approx. 6-36 m/min - Motor power: 4 - 8.6 kW Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2010, - Perfect for surface finishing - Constant working height - Q/L/Q Fine/cross-sanding machine Manufacturer: Weber Type: KSF-3-1350 Year of manufacture: 2010 Technical data - Equipped with 3 sanding belts for high-quality fine, veneer, and high-gloss sanding. - With a constant working height Machine frame - Heavy-duty steel welded construction for mounting 3 sanding units - Constant inlet height of 900 mm Kdodpozuzctefx Adqsr - Control and sanding belt change side on the inlet side, on the left - Stepless feed speed of 3-18 m/min, frequency-controlled. - Vacuum version of the conveyor belt / with 1 vacuum blower 5.5 kW, and a vacuum channel up to the upper edge of the machine Unit 1: Cross-belt unit - Pressure pad belt with felt and graphite for long service life - ISD segmented pressure bar system with 11 mm workpiece detection and 44 mm pressure pad width - Workpiece-controlled sanding belt blowing device Unit 2: CBF combination unit - One grooved rubber contact roller 0 130 mm, rubber hardness 60 Shore - One cross-running flap band with separate drive 4.0 kw - ISA segmented pressure bar system with 11 mm workpiece detection and 22 mm pressure pad width (counter-rotating) - Workpiece-controlled oscillating sanding belt blowing device Unit 3: Cross-belt unit - ISD segmented pressure bar system with 11 mm workpiece detection and 44 mm pressure pad width - Workpiece-controlled sanding belt blowing device Operator terminal SIEMENS" MP 377 12" Multi-Panel - Graphical user guidance via 12" color display - Program memory with 300 programs - Setting of all parameters via program WEBER i-Touch control - One rotary knob for navigating through the most important functions WEBER AWDM - Automatic thickness adjustment at the machine inlet with start switch Overthickness - Selector switch at the machine inlet with the following functions: - Automatic lifting of the contact roller and the segmented pressure bars - Feed stop ISA/ISD control - High-resolution workpiece detection in a 22 mm grid - Free loading of complex part shapes - Multiple loading with a small lateral distance - Sanding intensity individually adjustable at all edges - Sanding pressure adjustable via program ISA segmented pressure bar system (Unit 2) - Pressure pad movable in the longitudinal and transverse direction ISD segmented pressure bar system (Unit 1+3) As ISA, but additionally with - Separate adjustable pressure for the edge area (higher or lower) - Optionally only on the outer edge or outer and inner edges - Longitudinal and transverse edges or only longitudinal edges can be adjusted Workpiece blowing device - with WEBER ES system - Energy-saving, workpiece-controlled workpiece cleaning with single slider control WANDRES-Micro-Cleaning (single brush version) - Power sword brush with integrated micro-humidification of the linear brush (for optimal paint dust removal) Technical data - Working width: 1350 mm - Drive Unit 1 (frequency-controlled-Eco-Drive): 15.0 kW - Drive Unit 2 (frequency-controlled-Eco-Drive): 20.0 kW - Drive Unit 3 (frequency-controlled-Eco-Drive): 15.0 kW - Drive CBF: 3.0 kW - Drive vacuum blower: 5.5 kW - Drive feed (frequency-controlled): 3.0 kW - Drive height adjustment (frequency-controlled): 0.75 kW - Sanding belt speed (frequency-controlled): approx. 3-20 m/s - Sanding belt dimensions cross belts (W x L): 2x150x5100 mm - Sanding belt dimensions wide belt (W x L): 1370x2620 mm - Workpiece thickness (min./max.): 4-140 mm - Working height (constant): 900 mm - S

Condition: used, Year of construction: 2017, - 4 belt grinding units - Frequency control for all units - Electronic grinding pressure control Universal edge and profile grinding machine Manufacturer: Heesemann Type: UKP 20 Year of manufacture: 2017 Technical data Workpiece transport system - Total length: 5015 mm - Driven by a 1.5 kW three-phase motor with a double chain for workpiece transport Ksdpjzuzb Aofx Adqjdr - Feed rate in the range of 5-25 m/min, frequency-controlled - Working height constant at 880 mm - incl. integrated control cabinets - incl. adjustable guide rail with digital display and incl. counter rail with central width adjustment 4 lateral guide rollers between the grinding units for secure transport of workpieces Industrial PC 10.4" - LCD-TFT color display - Touch screen version - with display for production and downtime - with program memory for 100 programs 2 belt grinding units "M 4" Pos. 1 and 2 - for grinding straight edges - Belt dimensions: 2300x80 mm - Belt speed: 0.7-12 m/s - Motor power: 3.0 kW - with electronic frequency control for stepless control of the belt speed - Electronic grinding pressure control from the terminal 2 oscillation units for "M4" (Pos. 1+2) For complete utilization of the grinding belt 2 belt grinding units "K 4" Pos. 3 and 4 - for grinding small profile sections - can also be used for edge breaking - Can be swiveled 90 degrees upwards and 45 degrees downwards - Belt tear switch - Tool holder with quick-change device - Intermittent belt extraction device - Belt dimension: 2000x50 mm - Belt speed: 0.5-8 m/s - Motor power: 1.1 kW - with electronic frequency control for stepless control of the belt speed - Electronic grinding pressure control from the terminal 4 electronic control units - for the fully automatic timing of the lowering and raising of the grinding tool, depending on the set feed rate, the grinding pressure and the unit angle setting Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2021, - Working width 1,350 mm - Belt feed speed 2 to 16 m/min - PRO SAND electronic control Automatically Calibrating Sanding Machine Manufacturer: SCM Type: DMC system Year of manufacture: 2021 Technical data - Working width 1,350 mm - Belt feed speed 2 to 16 m/min - PRO SAND electronic control - PLC terminal with 10.4" LCD color display Unit 1 Kodpfxszuzbco Adqodr TIE 5000 working unit for additional table, internal cross-padding - Sequencing system of the unit for belt change by only one machine operator - Automatic brake - Linear blower with timed activation for belt cleaning - Belt dimensions: 150 x 5,000 mm - Chevron belt dimensions: 140 x 4,710 mm PE16T EPICS electronic sector sanding, pitch 16 mm - 16 mm distance between sectors from center to center - Double-acting pneumatic cylinders with adjustable feed/counter feed - Graphite cloth with quick extraction device - Complete management of functions via the electronic Pro Sand control - Motor with inverter power up to 15 kW Unit 2 DO19 orbital unit for 19 rotating disc brushes - Manual adjustment of the unit's working position - 1.1 kW main motor with inverter drive - Independent motor for controlling the orbital movement - Diameter of the rotating disc: 125 mm FT/19/125 Set with 19 rotating discs, diameter 125 mm Unit 3 BF300 working unit for brush roller, diameter 300 mm - Manual adjustment of the roller's working position - 4 kW main motor with inverter drive FT 300 brush roller, diameter 300 mm Unit 4 BF300 working unit for brush roller, diameter 300 mm - Manual adjustment of the roller's working position - 4 kW main motor with inverter drive FT 300 brush roller, diameter 300 mm Unit 5 SC 2620 working unit for super finish pad - Rotation of the belt in the opposite direction of the conveyor belt - Electronic belt swiveling control - Disc brake - Chevron belt dimensions: 1,370 x 2,186 mm - Belt dimensions: 1,370 x 2,620 mm PE16/C EPICS electronic sanding block with sector pitch 16 mm - 16 mm distance between sectors from center to center - Double-acting pneumatic cylinders with adjustable feed/counter feed - Graphite cloth with quick extraction device - Complete management of functions via the electronic Pro Sand control - Inverter motor with a power of up to 15 kW Inverter-controlled vacuum motor integrated into the machine frame, up to 7.5 kW - Rubber-coated conveyor belt, 50 Shore - 4 kW conveyor belt motor with inverter drive Console with integrated PC eye-M and electronic Maestro Pro Sand control with tele service system Device connected to the machine that enables the use of the Maestro Pro Sand software. The integrated LED light strip enables the operator to monitor the machine's status in real time (emergency, operation, etc.) without having to be near the machine itself. It is equipped with a fanless industrial PC with protection class IP53 (IP65 on the front). This robust solution guarantees the highest level of resistance even under the most adverse environmental conditions that an industrial site can offer. The 21.5" LCD color display with a large 16/9 touchscreen enables particularly easy and efficient control of the machine's most important functions: - Full HD display resolution 1920x1080 - LED backlight - Capacitive

Condition: used, Year of construction: 1998, Window manufacturing system Manufacturer: Weinig Type: Unicontrol 10-5 Year of manufacture: 1998 Technical data Working width: 40 - 220 mm Working height, longitudinal machining: 40 - 100 mm Working height, transverse machining: 40 - 100 mm (80 mm counterpiece height) Workpiece length, longitudinal machining: min. 220 mm + 2 x tenon length Workpiece length, transverse machining: min. 275 mm + 1 x tenon length at 320 mm tool diameter Feed (transverse machining) Motor power: 0.3 kW Feed speed: 3 - 25 m/min Workpiece clamping: by means of 2 clamping jaws Length stop: with scale and magnifying glass for frame or sash outer dimensions Counterpiece: pneumatically controlled - 4 positions - (not for studio windows) up to a wood height of max. 80 mm Double part package: For single or double part feeding. With transverse separation and retention system 1. Wood (lying against the stop) Wood width: 55 - 90 mm 2. Wood Wood width: 130 mm Feed (longitudinal machining) Motor power: 2.2 kW Feed speed: 4 - 18 m/min (continuously variable via frequency converter) Feed roller spacing: 100/120 mm Feed roller width: 30/50 mm Kdsdpfx Adezuyxgsqer Feed roller diameter: 95 mm Machining units Cut-off saw Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 2800 rpm Tool circle diameter: max. 400 mm Adjustment, axial: pneumatically controlled against a 4-position turret 1. Tenon and mortise spindle Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 3250 rpm Tool circle diameter: max. 320 mm Tool clamping length: 320 mm Adjustment, axial: 240 mm Number of tools: 4 x 80 mm Axial adjustment: hydraulic 1. Profiling spindle Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6000 rpm Tool diameter: max. 232 mm Tool zero circle diameter: 130 to 140 mm Tool clamping length: 320 mm Adjustment, axial/radial: 240/80 mm Number of tool positions: 4 x 80 Axial adjustment: hydraulic 2. Profiling spindle Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6000 rpm Tool diameter: max. 232 mm Tool zero circle diameter: 130 to 140 mm Tool clamping length: 320 mm Adjustment, axial/radial: 240/80 mm Number of tool positions: 4 x 80 mm Axial adjustment: hydraulic 2 Mechanical spindle brake for profiling spindle 3 Mechanical spindle brake for cut-off saw and profiling and sawing units Profiling milling unit (horizontal, top) before the last profiling spindle radially controlled to 2 positions axially controlled to 2 positions Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 5850 rpm Tool circle diameter: 130 mm Tool clamping length: 40 mm Adjustment, axial: 52 mm Adjustment, radial: 125 mm Profiling milling unit (vertical, right) at the end of the machine radially controlled to 2 positions axially controlled to 2 positions Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 5850 rpm Tool circle diameter: 210 mm Tool clamping length: 160 mm Adjustment, axial: 90 mm Adjustment, radial: 100 mm Length, tenon and mortise spindle with 640 mm tool clamping length (instead of 320 mm spindle) Motor power: 15 kW Spindle speed: 2925 rpm Number of tool positions: 8 x 80 mm Adjustment, axial: 560 mm Laser alignment light for cut-off saw for detecting the section Studio window configuration Swiveling length stop +/- 60 with electronic digital display and pneumatic clamping Sliding counter rail Special pressure pad for angled part production Limitation: Wood thickness max. 120 mm At -60 position: Workpiece width max. 110 mm with 80 mm tenon length, or max. 150 mm with counter profili

Condition: used, Year of construction: 2010, - Application of release agent, top/bottom - Joint milling unit - Gluing unit - Trimming unit - Copy milling unit SKF-L - Profile trimming blade unit - Spray cleaning agent - Self-adjusting trimming blade unit - Buffing unit Single-sided edge banding machine Manufacturer: IMA Type: Advantage 310 Year of construction: 2010 Technical data Workpiece - Workpiece length: min. 150 mm - Workpiece width: min. 65* / 150 mm *at a max. workpiece thickness of 25 mm - Workpiece thickness: min. 8 mm, 12 mm with profile trimming blades max. 40 mm (with MFA 08.346), 60 mm (with SKF) - Smallest workpiece: 65 x 300 / 150 x 150 x 19 mm - Machining allowance per workpiece edge: 0 - 5 mm (observe max. chip cross-section) - Workpiece shape: right-angled - Material: chipboard, MDF - Surface material: direct coating (melamine resin paper), paper, film, veneer Edge material - Roll material without film: Paper edges & plastic edges: 0.3 - 3.0 mm Veneer edges: 0.5 - 3.0 mm - max. edge cross-section: 150 - 180 mm² - Cut edge strips: Strips: 3.0 - 8.0 mm - max. strip cross-section: 520 mm² - Edge height: min. 12 mm, max. 65 mm - max. upper edge overhang: 2 mm - Edge profiles Paper edge: approx. 0.4 mm, chamfer 15 Plastic edge up to 3.0 mm, radius depending on the tool Strip up to 8 mm flush milling (with interchangeable motor on MFA) Machine - Constant workpiece projection from the chain track: 35 mm + edge thickness - max. trimming cross-section 520 mm² - Throughput width: min. 65 mm (with projection of 35 mm) - min. workpiece length in feed direction: 150 mm - Overall height (top edge of chain track): 940 mm - Unit side: on the left in feed direction - Pneumatic connection: approx. 7 - 8 bar Application of release agent, top/bottom Joint milling unit 08.379 and blowing nozzle - with 2 motors, each 4 kW, 9000 RPM, 150 Hz Gluing unit 283.1513 with oil bath gearbox - Adhesive output 0.8 l, 60 mm high, with quick-lock system - can be used for hot melt adhesive or PU adhesive - with single roll / strip magazine, roll diameter 800 mm - with 3 main pressure rollers and 3 counter pressure rollers Trimming unit 08.415 - pneumatically swiveling to 0 or 8 degrees - with 2 motors 660 kW, 400 V, 200 Hz, 12000 RPM - 2 HM trimming saw blades 160 x 3.5 x 22, Z=36 Copy milling unit SKF-L Kdodpfxezuyp Es Adqjr - with 2 motors 180 W, 400 V, 200 Hz, 12000 RPM - and 2 motors 400 W, 400 V, 200 Hz, 12000 RPM - 1 set of DP profile milling cutter I 80x12xHSK25-R, Z = 4, with HSK25 shank - Profile length in the feed direction: max. approx. 50 mm - Workpiece thickness: max. 60 mm - Working speed: max. approx. 20 m/min - Distance between 2 workpieces: min. approx. 400 mm - min. workpiece projection = 35 mm + profile depth Profile trimming blade unit 08.519 - For finishing a top and bottom milled quarter-circle profile Spray cleaning agent Self-adjusting trimming blade unit 08.521 - for removing hot melt adhesive residue from the edge area of the top and bottom of the workpiece Buffing unit 08.617-2 - with an upper and lower motor: 180 W, 50 Hz, 1400 RPM - 2 polishing pads 50 x 160 x 19 mm

Condition: used, Year of construction: 2017, Edge banding machine Kdodpezuyk Nsfx Adqjr Manufacturer: SCM Type: Olimpic K360 T-ER1 Year of manufacture: 2017 Technical data - Feed speed: 11 m/min - Edge thickness: 0.4 - 6 mm - Control: SCM control panel with display - Board thickness: 8 - 60 mm - Power supply: 400 V / 3~ / 50 Hz, 23 A - Min. workpiece: 140 x 90 mm Units Pre-milling - 2 counter-rotating diamond heads (up to 3 mm removal) EVA gluing unit Pressure zone with driven roller + 2 pressure rollers End trimming unit K-2 (straight / beveled, automatic switching) Flush trimming - flush, radius, chamfer Corner rounding R1/R2 Profile + surface scraper blade Polishing unit Anti-adhesive liquid system (2 liquids), edge roller feed Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2003, Single-sided edge trimming and gluing machine Manufacturer: IMA Type: AVM/K/I/G80/822/S3R3L20 Year of manufacture: 2003 For milling, edge gluing, and finishing for a standard groove - only for pre-shaped/pre-grooved doors and square-edged doors Left-hand machine (fixed stop on the left). Complete processing in 3 passes 1st pass: Processing of the top surface of the door (transverse processing) 2nd pass: Door long edge 3rd pass: Door long edge During the 2nd and 3rd passes, the protruding transverse edge from the 1st pass is milled off by using a co-rotating/counter-rotating milling process. Double groove gluing is only possible through modifications to the machine and subsequent manual finishing of the edge. Max. door thickness: - Straight edge: approx. 70 mm - Groove gluing: approx. 60 mm Stable machine frame as a support for aggregates and housing for electrical installation. Drive for feed speeds of approx. 5-25 m/min., mechanically infinitely adjustable. (not to be confused with processing speed) Continuous, plastic-coated strip-type conveyor chain, approx. 80 mm wide, with automatic central lubrication. Manually height-adjustable top pressure with a V-belt 80 mm wide and spring-loaded, ball-bearing guide rollers. Machine length approx. 10,900 mm Infeed table at the machine inlet. 1 horizontal, manually adjustable, unheated stop bar 1 joiner milling unit controllable, not swiveling, without sensing with 2 motors, each 3 kW Gluing unit for optional operation of straight edge or softforming gluing, by changing the glue application. Edge material: - Strips: up to 1.3 mm - Roll material: 0.4-3 mm - Solid wood strips: 6 mm Strip length max.: 2550 mm Strip height: 14-80 mm (depending on glue application) with: - Side adjustment by hand for the pneumatically controlled glue application. - Height adjustment by hand -15mm downwards and up to +10mm upwards. 1 bell for the main pressure roller, manually adjustable 1 glue application 0.8L, max. edge height 70mm, straight edge with pneumatic quick-release, Chem-Coat coated, electronic temperature control 1 hot melt glue application 0.8L with quick-release, up to max. 80 mm high edge material, soft edge, Chem-Coat coated, with temperature control and control unit for the strip coating 1 automatic Quickmelt hot melt glue feeder with a heating power of 5.0 kW 1 2-fold magazine only for edge material up to 3.0 mm thick, can be manually attached to the single-roll magazine 1 groove forming pressing unit for pressing the edge material into the groove with: - an activation unit 15 kW for re-activating the edge material for groove forming - a pneumatically controlled forming shoe for the underlapping edge - a pneumatically controlled forming shoe for the entire groove - additional post-pressing rollers for the edge areas in the groove - an electro-pneumatic lateral retraction device for the entire pressing unit Kdjdszuykvspfx Adqjr 1 horizontal adjustment with mechanical digital display 1 trimming unit for 2 motors mounted on the top pressure for trimming the front and rear edge/strip overhang, for trimming cuts flush or with a bevel. 1 milling unit for 2 motors with height sensing, side sensing, for pre-milling from below and above with 2 motors 1kW, 400V, 200Hz, 12,000 RPM, 30° swiveling 1 milling unit for 2 motors with height sensing, side sensing, for fine milling from below and above with 2 motors 660W, 400V, 200Hz, 12,000 RPM, 30° swiveling Note: The technical data and descriptions are copies of the original order

Condition: used, Year of construction: 2009, Edge banding machine Manufacturer: IMA Type: Novimat/I/G80/650/R3 Year of manufacture: 2009 Technical data - Workpiece overhang from the chain conveyor: 38 mm - Feed width: min. 65 mm (with max. workpiece thickness of 25 mm) - Workpiece length in feed direction: 150 mm - Overall height (top edge of chain conveyor): 960 mm - Feed speed: approx. 6 - 30 m/min, electrically adjustable - Machine control system ICOS open compact Workpiece - Workpiece length: min. 150 mm - Workpiece width: min. 65 mm - Workpiece thickness: 8 - 40 mm (with edge trimming function) / 60 mm (without edge trimming function) - Smallest workpiece: 150 x 150 mm or 65 x 300 mm - Edge material: paper, plastic and veneer - Height: 14 - 65 mm - Roller material thickness: 0.3 - 3.0 mm (veneer edges limited to max. 1.0 mm) - Max. upper edge overhang: 5 mm Units Infeed area - Release agent applicator mounted at the top and bottom, not adjustable Edge trimming - 2 motors 4.5 kW, 150 Hz, 9000 rpm - incl. frequency inverter with braking function - Motor 1 counter-rotating - Motor 2 co-rotating Gluing unit VTG 3-6 - with one preheating nozzle 300 mm for preheating the workpiece edge - 6-position edge magazine for roller material 0.3 - 3 mm thick. - 1 driven main pressure roller and 4 pressure rollers, with scraper, pneumatically adjustable Glue application - with pneumatic quick-lock system - Chem-Coat coating - electronic temperature control - Volume 0.8 l Pre-melting tank approx. 1 l - Heating power 3 x 400 W - with EVA glue, approx. 7.0 kg/h - with filler-free glue, approx. 5.0 kg/h Cutting unit - 2 motors 660 W, 200 Hz - incl. frequency inverter with braking function - pneumatic pivoting 0+25 for straight and bevel cutting Flush trimming - 2 motors each 1000 W, 400 V, 200 Hz, 12000 rpm - with HSK 25 shank - incl. frequency inverter with braking function Multi-profile trimming unit - 2 motors each 660 W, 400 V, 200 Hz, 12000 rpm - with HSK 25 shank - incl. frequency inverter with braking function - for trimming 4 profiles - with stepper motor axes for horizontal and vertical positioning Contour trimming unit KFA x30 - 1 motor 500 W, 400 V, 400 Hz, 18000 rpm - Program-controlled conversion for up to 4 profiles - incl. fine positioning for different edge thicknesses Multi-profile scraping blade - Stepper motor axes for horizontal and vertical positioning - Scanning from above and below (max. 4 profiles) - Scanning from the side via pneumatic pressure Spray nozzles at the top and bottom for applying cleaning agents - fixed, not adjustable Surface scraping blade - with height sensing skid Ksdpfjzuyi Esx Adqjdr - electronically controlled horizontal positioning Buffing unit - 2 lower and 2 upper motors, 180 W, 50 Hz, 1400 rpm - 1st motor pair with cloth-sisal discs 50x160x19 mm - 2nd motor pair with polishing discs 50x160x19 mm - The motors operate in the same direction and are both tilted and pivoted in the feed direction. - Each motor can be individually adjusted vertically 2x NC-controlled grooving - 2 milling motors each 4.5 kW, 150 Hz, 9000 rpm - incl. frequency inverter with braking function - one manual 90-degree pivoting device from 180 -270 with co- and counter-rotating function - Horizontal, stepless adjustment with AC servo motor for grooving unit Workpiece return Note: The technical data and descriptions are copies of the order confirmation at the time. The information is for informational purposes only and is non-binding.

Condition: used, Year of construction: 2006, - Edge milling unit 2 x 2.2 kW - Combi-melt gluing unit - Automatic edge magazine - Trimming unit 2 x 0.8 kW - Flush trimming unit 2 x 0.7 kW - Fine milling unit 2 x 0.3 kW - 2 quick-change sets for fine milling - Automated copy milling unit 2 x 0.37 kW - 2 pull blades - 2 surface pull blades - 5-way spraying system - Fine buffing unit with cloth disc 2 x 0.2 kW Edge banding machine Manufacturer: OTT Type: Twister Technical data: Glue application: Hot-melt adhesive application roller with simultaneous and counter-rotating action Edge thickness: 0.3-10 mm Workpiece thickness: 8-60 mm Workpiece width: 70 mm - Minimum Workpiece length: 150 mm - Minimum Operating pressure: 6 bar Feed power: 3.0 kW Feed speed: 14-20 m/min. Electrical connection: 3 x 400 V, 50 Hz Extraction: at 20 m/s, 1 x 180 mm diameter = 35 m³/min. Air velocity: 20 m/s - Minimum Compressed air consumption: 300 liters/min. (approximate value) Equipment - Machining units: Joining: - 2 x 2.2 kW, n=14600, 250 Hz, two individually controlled spindles. Combi-melt gluing unit: - Top-mounted gluing unit with interchangeable hopper for processing EVA, PUR hot-melt adhesives, or standard cleaning granules, hopper volume 2.5 l Edge magazine: - Automatic edge magazine with optical monitoring for strip edges in fixed lengths Trimming: - 2 x 0.8 kW, n=12000, 200 Hz, automatic pivoting 0 / 5, 2 HM saw blades, 140 x 3.2 x 16 mm, z=34 Flush trimming: - 2 x 0.7 kW, n=12000, 200 Hz, single-sided, with 2 HM reversible blade cutter heads HF70, 70 x 20 x 16 mm, z=4 Fine milling (chamfer 15 / 30 / 45): - 2 x 0.3 kW, n=12000, 200 Hz, double-sided, with 2 HM reversible blade cutter heads HF70, 70 x 20 x 16 mm, z=4 AWSR (radius R2-R5): - 2 quick-change sets for fine milling, 2 x 0.3 kW, with 2 HM reversible blade cutter heads AR73 x 16 x 16 mm, z=3, R2-R5 Copy milling: - Automated copy milling with two separate spindles for machining end faces and longitudinal radii. Motor power: 2 x 0.37 kW, 12000 rpm, Tools: R1 - R3 Pull blade: - 2 HM pull bars, automatically adjustable Surface pull blade: - 2 HM pull bars with fine adjustment Kdsdpjzuyifofx Adqer PU set: - 5-way spraying system, 2 x release agents, 1 x lubricant, 2 x cleaning agents, fine buffing unit with cloth disc Edge finishing: - 2 x 0.2 kW, n=2800, 50 Hz, oscillating brushes Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2005, Single-sided edge banding machine Manufacturer: IMA Type: Novimat Systems/I/R75/1000 Year of manufacture: 2005 Technical data PC control - ICOS OPEN control system Feed rate 5-25 m/min, frequency-controlled Fence with electronic positioning control Adhesive application above and below Trimming unit with 2 motors, each 4.5 kW, 9,000 rpm, controllable. - Horizontally adjustable via axis Heating element approx. 300 mm long, 2x 1.5 kW Gluing unit - Adhesive application with pneumatic quick-lock system. - Automatic PU melting system Quickmelt for 2 kg cartridges - 32-position edge magazine (8 slots up to 3 mm / 24 slots up to 1.3 mm) Vertical roller holder for 32 rollers, max. diameter 850 mm Cutting unit on the upper pressure roller with 2 motors, each 200 W, 400 V, 12000 rpm. - Horizontal pneumatic swiveling 0-25 - With controllable side contact, for 3 edge thicknesses Trimming unit with 2 motors, each 1000 W, 400 V, 200 Hz, 12000 rpm. - Operating in counter-rotation. Multi-processing unit 08.348 - For chamfering or radius trimming of the upper and lower longitudinal edges, as well as for copying the front and rear workpiece edges. - Program-controlled adjustment for up to 4 profiles - 2 motors, each 660 W, 400 V, 200 Hz, 12000 rpm. Spray nozzles above and below for applying cleaning agents Multi-profile scraper unit - With stepper motor axes for horizontal and vertical positioning. - For 4 profiles. Straight scraper unit - With electro-pneumatic retraction device Copying edge smoothing unit - With 4 smoothing motors, each 250 W - Smoothing unit with 2 lower and 2 upper motors, each 180 W, 50 Hz, 1400 rpm. Smoothing unit - For smoothing and eliminating the white haze on the trimmed PVC/ABS edges Kdodpfx Adjzuyhnsqsr - With an upper and lower smoothing zone With workpiece return system LGIMATECH ZHR 05/L/145 - Air cushion table, inclined, 2 return belts with brushing devices from below. Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2003, - Workpiece length: 800 - 3000 mm - Workpiece width: 350 - 1400 mm - Workpiece thickness: max. 70 mm with edge / max. 80 mm for milling - Main spindle 12 kW - Tool changer, 18-position CNC machining center Manufacturer: Homag Type: PROFI BAZ20/30/16/V/D Year of manufacture: 2003 Technical data Homatic - CNC control CNC programming system WOODWOP Postprocessor Workpiece dimensions - Workpiece length: 800 - 3000 mm Kodpjzux Tpsfx Adqjdr - Workpiece width: 350 - 1400 mm - Workpiece thickness: max. 70 mm with edge / max. 80 mm for milling - Edge band width: min. 120 mm - Weight: max. 150 kg Throughfeed table - Longitudinal console 1, fixed installation - Longitudinal console 2, manually adjustable via width adjustment in the Y-direction - 8 vacuum clamps 125 x 50 x 100 mm - Working height, bottom edge of workpiece: 950 mm Motor, width adjustment, longitudinal console, traversing table - For different workpiece widths via servo drive for throughfeed table - Per longitudinal console Chip conveyor - Chip and waste disposal via integrated chip conveyor under the longitudinal traverse Stop pins for top layer overhang - Stop pins with lifting-rotating mechanism for workpieces with max. 20 mm top layer overhang - Individually selectable, end position monitored, stroke 110 mm - For manual placement of doors Vacuum pump 100/140 m3/h Unit for positioning the vacuum clamps - Mounted on the unit carrier with pneumatic extension console - For max. 4 vacuum clamps per longitudinal console Main spindle 12 kW - Tool holder HSK F63 - Extraction system for all tools and units - Three-phase asynchronous motor 12 kW at S1, water-cooled - Tool weight: max 6 kg incl. holder - Tool length: max. 200 mm from the motor spindle bottom edge - Tool diameter: max. 180 mm for milling tools / max 200 mm for sanding tools - Frequency converter: 15 kW - Speed range: 1500 - 18000 rpm, stepless, programmable - Full rated power from 12000 rpm Unit interface for the main spindle - For connecting the machining units - Pneumatic and swivel drive interface - C-axis with torque transmission and 3-point support Tool changer, 18-position For tools and units with HSK F63 Tool weight: 6 kg Tool length: max. 200 mm from the motor spindle bottom edge The following tool and unit configurations are possible - 18 x max. 130 mm - 9 x max. 180 mm and 9 x max. 70 mm - Tool diameter max. 200 mm for sanding tools - Tool changer can be raised for a moving pick-up station on the left side Drilling/milling unit, 4 spindles, for tool changer - For automatic changing in the main spindle - Collet holder ER25 up to max. 16 mm shank diameter - Tool protrusion max. 50 mm - Speed: max. 13500 rpm - Standard collet 10 mm - Infinitely swiveling via the C-axis - Without tool Lock case milling unit, 2 spindles, D=16/20 - With integrated blow-out nozzle - Two-sided spindle outlet with counter-rotating direction - Speed: 12000 rpm - Infinitely swiveling via the C-axis - Without tool 1x Weldon chuck: 20 mm - Reducing sleeve for tool 16 mm - Total tool length: 180 mm - Tool protrusion: max. 135 mm 1x ER16 collet with 10 mm - Total tool length: max. 70 mm - Tool protrusion: max. 40 mm Sawing/drilling unit, swiveling, for tool changer - For miter cuts and angled drilling - Manually swiveling 0 - 90 degrees - Mounting flange 30 mm with countersunk head screws - Tool diameter 52 mm - Prepared for miter saw: max. 180 mm - Drill chuck with Weldon chuck: D=10 mm - Speed: max. 9000 rpm - Infinitely swiveling via the C-axis -

Condition: used, This is a vacuum machine from the manufacturer Komet, type PlusVac 20, a tabletop model. This vacuum machine is in very good condition. The machine underwent a thorough inspection in our in-house workshop (motor flush and new pump oil added). The following parts were replaced: counter-pressure bar of the sealing bar + air vent element + lid seal + lifting cylinder + sealing bar overhauled, sealing wires + Teflon tape replaced. The machine is fully functional. You will receive an invoice with VAT shown. This machine is made of stainless steel, is robust and reliable. The machine has a Plexiglas lid and is equipped with electronic control and a vacuum stop button. It has a double-wire sealing bar with a sealing length of 405 mm. The maximum bag size is approximately 400 x 500 mm, and the chamber size is approximately 430 x 505 x 175 mm. Our used equipment service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, without installation and removal costs. High-quality branded equipment at fair prices. Professional overhaul / inspection & expert cleaning. Tested & fully functional - or money back. Flexible shipping or self-collection options. Competent advice - before and after purchase. Provision of operating instructions, connection diagrams & spare parts. Inspection according to DGUV V3. Technical data: W x D x H: approx. 485 x 615 x 400 mm Power connection: V: 400 / kW: 1.078 / A: 3.487 / Hz: 50 Weight: approx. 62 kg Machine number: 3081454316 Chamber size (W x L x H / mm) 430 x 505 x 175 Control Standard Comfort Option Perfect Sealing length (mm) 1 x 405 (2 x 405) Sealing bar length: (mm) 420 Double seam Kjdezu Rrkspfx Adqjdr Distance x (y) (mm) 455 (400) Sealing bar arrangement Standard front Option rear Pump (cbm/h) 21 Power connection 400V / 3Ph+N+PE / 50Hz Power consumption (kW) 1.1 Max. bag (mm) 400 x 500 Insertion plates 2 External dimensions (lid closed / W x D x H/mm) 480 x 655 x 385 External dimensions (lid open / W x D x H/mm) 480 x 655 x 920 Condition: used, inspected, fully functional Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Subject to change and errors. Do you have any questions, would you like advice, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: ready for operation (used), Year of construction: 1997, operating hours: 34,000 h, travel distance X-axis: 570 mm, travel distance Z-axis: 2,000 mm, number of axes: 2, Horizontal turning machine manufactured in 1997. This BOEHRINGER DUC 560/2000 features a maximum turning diameter of 570 mm and a turning length of 2000 mm. It includes an 8-position disc turret and a three-jaw chuck with a diameter of 200 mm. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER DUC 560/2000 machine we have for sale. Contact us for further details. Kdjdpfxezuyqco Adqor - Main Drive: 19 kW- Machine Control: NUM / Keller/Plus (IBM Monitor setup)- Maximum Torque Duty Cycle: 60% / 100%- Torque: 1800 / 1400 Nm- Max Rapid Traverse (Longitudinal/Cross): 10 / 5 m/min- Tool Turret: 8-position disc turret, Sauter VDI 30- Chuck: Forkardt three-jaw chuck installed, diameter 200 mm- Included Accessories: Steady rest- Operational Status: Out of service since mid-2023 due to operator retirement- Operating Hours: Approx. 34,000 hours (single-shift operation/power-on time) Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2005, operating hours: 7,500 h, spindle motor power: 18,500 W, spindle speed (max.): 3,500 rpm, travel distance Y-axis: 120 mm, overall weight: 5,800 kg, number of axes: 4, This 4-axis DMG Mori Seiki SL 2500 Y was manufactured in 2005. It features a maximum swing diameter of 755 mm and a machining diameter of 390 mm, with a maximum machining length of 655 mm. The machine includes a 12-station turret and a programmable hydraulic tailstock. If you are looking to get high-quality turning and milling capabilities, consider the DMG Mori Seiki SL 2500 Y turn-mill centre we have for sale. Contact us for further details. • Capacity & working area: • Max. swing diameter: 755 mm • Max. machining diameter: 390 mm • Max. machining length: 655 mm • Bar capacity: 75 mm • Rapid traverse: 18 m/min (X) / 24 m/min (Z) • Guideways: Box ways on all axes • Main spindle & headstock: • Spindle torque: 640 Nm • Spindle nose: A2-8 • Chuck: 250 mm Kitagawa B-210 (metric) • Cooling: Daikin spindle oil chiller • Turret & live tooling: • 12-station turret (all stations motorized) • Turret indexing time: 0.2 s • Live tooling speed: 4,000 RPM • Live tooling motor: 5.5 kW • Tooling system: Sandvik Capto quick change tooling system (valued at €22,000–€24,000) Kdsdpezuymqjfx Adqer • Tailstock & axes: • Axis configuration: 4-axis (X, Z, Y, C) • Tailstock: Programmable hydraulic tailstock • Tailstock taper: MT5 Morse taper • Control, software & measuring: • 3D graphic simulation via proprietary CAM software • Cycle time verification • Automatic load control & tool wear monitoring • Tool measurement: Automatic Renishaw tool presetter arm • Connectivity: USB, PCMCIA, RS-232 Additional equipment • Bar feeder interface (machine prepared) • Interface for Autoblok hydraulic steady rest (ready for installation) • Automatic parts catcher • Hinge-type side chip conveyor • Large assortment of static and live tool holders • Dual foot pedal (main chuck & tailstock operation) • Electrical transformer • Complete documentation: Parts list, electrical schematics, programming & operating manuals Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 800 rpm, travel distance X-axis: 550 mm, travel distance Z-axis: 4,000 mm, spindle motor power: 15,000 W, total height: 1,700 mm, total width: 1,950 mm, overall weight: 9,600 kg, product length (max.): 6,900 mm, workpiece diameter (max.): 1,010 mm, number of slots in tool magazine: 4, number of axes: 2, Horizontal turning machine manufactured in 2007. This KEY EAST BV-40160 features a swing over bed of 1,010 mm and a distance between centers of 4,000 mm. It includes a front and rear chuck diameter of 500 mm, along with a digital readout for enhanced precision. If you are looking to get high-quality turning capabilities, consider the KEY EAST BV-40160 machine we have for sale. Contact us for further details. Kdsdpfx Adozuxl Sjqor • Conventional flat bed lathe with 2 axes (X and Z) • Equipped with a compound slide featuring a glass scale, whose movement is calculated together with the Z-axis on the digital readout for improved positioning accuracy • Power Supply: 380 V • Frequency: 50 Hz • Phase: 3 Ph • Center Height: 505 mm • Distance Between Centers: 4,000 mm • Front Chuck Diameter: 500 mm • Rear Chuck Diameter: 500 mm • Steady Rest: Included • Tailstock: Included • 4-Way Manual Tool Post: Included • Coolant System: Included • Lubrication System: Included • Machine Condition: Used Technical Specification Counter Spindle No Driven Tools No