Used Corrugator Pipe for sale (2,913)

Condition: new, Year of construction: 2024, functionality: fully functional, input voltage: 400 V, power: 2.2 kW (2.99 HP), input current: 5 A, Equipment: type plate available, TEKA welding fume extraction system 3 units with control units, pipes, and mounting hardware Lsdpfxjz Sp Ahs Abyehn The system is new, has never been used, and is partially still in its original packaging!

Condition: used, Year of construction: 2023, Overview Single-module tunnel warmer by TMCI Padovan (SAP-Blendtech), built in 2023 for filled beverage cans. The machine brings cold-filled cans from 5 °C to 25 °C with a 40 °C water spray over a treatment surface of 9 m², at an output of 35,000 cans per hour. It was configured for 0.33 l and 0.15 l cans. The tunnel body, frame and pipework are stainless steel. The machine is steam-heated, with a multi-tubular heat exchanger for condensate recovery, and a Siemens PLC with teleservice and a touchscreen HMI runs the process. The machine is currently installed and was seen in operation. Technical details - Year of manufacture: 2023 - Output: 35,000 cans/h - Can sizes: 0.33 l and 0.15 l, diameter 58.4 mm and 53.3 mm - Treatment surface: 9 m², single deck, 1 module Lhedez Sp Anjpfx Abyjn - Treatment time: min. 4.5 minutes - Product temperature: 5 °C inlet, 25 °C outlet - Spray water temperature: 40 °C - Steam consumption: approx. 508 kg/h at 3 bar - Make-up water: approx. 1 m³/h - Instrument air: approx. 500 Nl/h at 6 bar - Installed power: 9 kW - Electrical supply: 400 V, 50 Hz - Conveyor height: 1,200 mm ± 30 mm - Footprint: approx. 6,300 mm long, 2,450 mm wide (3,030 mm including side piping) - Height: approx. 1,800 mm - Service clearance: 800 mm around the machine - Connections: water inlet 15-20 °C max. 2 bar, steam 3 bar, air 1/2" at 6 bar, basin overflow DN 100, basin drain 1 1/2" BSP Equipment - Single-deck tunnel warmer, 9 m², 1 module - Multi-tubular heat exchanger for condensate recovery - 1.1 kW blower for water recovery - Tank with condensate booster pump - Air conditioning unit - Active infeed and outfeed conveyor - Side inspection windows on the spray zone - Siemens PLC with teleservice, touchscreen HMI with process overview - Profinet port, cycle pause and auxiliary start buttons, emergency stop, main switch, signal tower Condition and availability - Built in 2023, currently installed and in operation - Layout drawing available - Availability on request - Location: Albania

Condition: used, Year of construction: 2003, Overview This KKT Kraus KLC 126 N is an air-cooled industrial chiller, built in 2003. It runs on refrigerant R407C, with the condenser fans on top and the control cabinet built into one end face. It served a Krones Contiform S24 blow moulder and was in production until March 2026. Dismantled in October 2026, it is now stored and ready for loading. Technical data - Manufacturer: KKT Kraus - Model: KLC 126 N - Year of manufacture: 2003 - Machine type: air-cooled chiller - Refrigerant: R407C, max. filling weight 43.5 kg Lhjdsz Sp Nhopfx Abyen - Max. operating pressure: 28 bar - Power supply: 400 V, 3 phases, 50 Hz - Max. power input: 64 kW - Max. current consumption: 118 A - Main fuse: 160 A - CE marked Equipment - Air-cooled condenser with axial fans on top of the housing - Integrated control cabinet with digital temperature controller, indicator lamps, selector switch and main switch - Pipe connections on the end face opposite the control cabinet - Enclosed steel housing Condition Used chiller from 2003, in production until March 2026. Dismantled in October 2026 and stored. Availability Available immediately. Location: Germany.

Condition: used, Weinig Unimat 17A automatic planing and moulding machine for four-sided planing and profiling of timber, with a universal spindle. Includes protective enclosure and extraction pipes. Technical data: - Spindles: 7 - Spindle 1: Bottom / 5.5 kW - Spindle 2: Right / 4 kW - Spindle 3: Left / 4 kW - Spindle 4: Right / 4 kW - Spindle 5: Top / 5.5 kW - Spindle 6: Bottom / 5.5 kW - Spindle 7: Universal / 4 kW - Working width: 170 mm Lsdpfezrx A Sox Abyohn - Working height: 120 mm

Condition: used, Year of construction: 2016, Overview This Speidel Braumeister 200 L is a compact all-in-one brewhouse: mashing, lautering and wort boiling take place in a single vessel. The unit was bought new from Speidel in 2016 and has been used exclusively for craft ales (top fermentation), with about 280 brews. It was in production until August 2026 and is now dismantled and stored in a climate-controlled warehouse. The malt pipe sits inside the kettle; the recirculation pump drives the wort through the grain bed, and the integrated lifting device raises the malt pipe for lautering. The automatic controller runs the brewing programme. Technical data - Manufacturer: Speidel - Model: Braumeister 200 L Lsdpfx Absz Sr Uyjyshn - Year of manufacture: 2016 - Nominal brew volume: 200 L - Power supply: 400 V, three-phase, 50 Hz - Power: 9.3 kW; heating 3 x 3,000 W - Dimensions: approx. 136 x 90 x 208 cm including lifting device - Weight: approx. 150 kg - Control: automatic - Utilities: no cooling water and no permanent drain connection needed in normal operation Equipment - Stainless steel lid - Malt pipe with perforated filter plates, fixing bar and clamp - Lifting device for the malt pipe - Recirculation pump - Automatic controller - Hoses, external connections, cable and three-phase plug - Printed manual; invoice, CE certificates and original documentation available Condition Used, in excellent condition: no known faults, leaks or pending repairs. Pumps, heating elements, seals and controller are original. Maintained quarterly according to the manual; routine cleaning with warm water and alkaline detergent, with caustic soda and nitric acid every five brews. The unit sits on its own frame and can be loaded without a pallet. A second, identical unit is available as a separate offer. Availability Available immediately. Location: Spain. Viewing is possible by appointment.

Condition: new, power: 427 kW (580.56 HP), axle configuration: 4x2, color: white, driver cabin: sleeper cab, gearing type: automatic, Equipment: ABS, EBS, air conditioning, - Braking system - Available in multiple versions!!! POWERTRAIN Preparation for auxiliary drive Emission standard EURO VI E DRIVE T. 315/70R22.5 Speed limiter 90 km/h CAB EXTERIOR Roof hatch, electric version, transparent for MLL high roof Front grille design Standard black Manual cab tilting mechanism Mirror cams Cover for AS FHS in body color / For AT/AD in black Cab rear wall without window Front underrun protection for chassis with a gross vehicle weight greater than 7,490 kg First aid kit Plastic bumper AS cab, high roof Windshield, non-heated Cab roof insulation, standard CAB INTERIOR Sun visor for side window, driver's side Dashboard design: plastic with black trim COC Certificate of Conformity INSTRUMENT CLUSTER 10 INCHES Passenger seat, static CHASSIS Weight variant front axle 8,000 kg / rear axle 11,500 kg (technically possible 13,000 kg) Air compressor 2-cylinder, 630 ccm, with integrated clutch, on-demand controlled Smart generator 2880 W (24V x 120A), on-demand controlled Parabolic spring on the front axle Batteries in frame overhang Wheel chocks, 2 pieces SR-SOLO LIGHT 17x Signs for air tank, standard Rear shock absorbers Design for moderate climate Chassis frame in gray Trailer brake, standard Battery charging interface Stabilizer bar, front, exhaust pipe end, to the left Air filter unit under the cab Frame setting, standard Ride height, standard MAIN FEATURES Trailer, 2-circuit brake Fifth wheel coupling dimension EG Trailer socket for 24-volt operation, 15-pole Rear axle ratio: i = 2.31 Lhjdj Aavc Aspfx Abysn Frame overhang, rear, 1047 mm FUEL EFFICIENCY & CONNECTIVITY Transmission mode, standard Preparation for toll system (OBU) ConnectivityBox 4G, telematics contract optional Engine idle shutdown Standard engine setting Cursor 13 Tire pressure monitoring system (TPMS), internal sensors 4 DIN slots, storage compartment on top VDI interface (Vehicle Data Interface) for telematics services (FMS), version 4.0 Infotainment, 10" TFT display Transmission software ECO-Roll (free-wheeling function) GPS cruise control Hi-Cruise Adaptive cruise control (ACC) SAFETY Advanced driver distraction warning system Warning triangle, design and dimensions according to ECE-27 Standard catwalk behind the cab Hill holder (hill start assist), for comfortable starting on inclines Electronic stability program (ESP) Rear view monitoring system with camera Blind spot monitoring system (BSIS), right Intelligent speed assistant (ISA) Side marker lights, forward monitoring (MOIS) Autonomous emergency braking system (AEBS) Preparation for alcohol interlock (ALC) with cable OTHER CEE type plates NOISE ECE 51/03 Vehicle width, standard EU VIN code, digital CAMBIO 12TX 2860 TD VIN: Manufacturer index ZCF With radiator conveyor Smart storage compartment on top CHASSIS Electro-hydraulic power steering Air reservoir in aluminum version, quantity depending on suspension version and trailer version.

Condition: new, mileage: 190 km, power: 137 kW (186.27 HP), color: white, gearing type: mechanical, loading space length: 60,500 mm, loading space width: 24,960 mm, loading space height: 23,690 mm, Equipment: ABS, air conditioning, central locking, power assisted steering, For inquiries regarding the vehicle, please contact Mr. Seidel (at the telephone number provided). Iveco Eurocargo ML75E19/P 4x2 box van + tail lift. Tail lift: D’Hollandia DHLM 1,000kg. *POWERTRAIN* 01884 ZF 6S 700 TO manual transmission, 03325 Emission standard EURO VI E, 78339 ENGINE RPM 2200, PARAMETER 2350, 01455 DRIVE T. 205/75R17.5, CAB EXTERIOR, 07748 Manually operated cab tilting mechanism, 04478 Front headlights halogen, 01005 Standard cab with flat roof, 14605 Towing and maneuvering eye front, 07279 Bumper plastic, 07275 Cab components black, 01597 MY 2024, 79467 Flat roof in white, CAB INTERIOR, 72579 Electronic immobilizer and 2nd vehicle key, 77991 Clothes rack on the rear wall of the cab including adjustable hooks, 06015 Rear axle ratio: 3.58, 06617 Passenger seat bench for 2 people, center seat with 2-point belt, 04311 Cab interior trim with fabric upholstery, 02444 Plastic steering wheel with function buttons for radio, telephone, cruise control and menu navigation, 00821 EU tachograph digital 4.1, CHASSIS, 02181 Exhaust pipe centrally located under the vehicle, 08556 Air suspension on rear axle, 08550 Parabolic spring on the front axle, 00219 Wheel chocks, 2 pieces, 06318 Air compressor 225 ccm, 06438 Left-hand drive for right-hand traffic, 03283 Engine intake air heater for optimal cold-start performance at extreme temperatures, 07700 Jack, 02096 Air dryer for braking system, heated, 05123 C-profile steel ladder frame, 02094 Air tank in steel design, number depends on suspension version and trailer version, 77267 Gross vehicle weight 7,490kg (weight variant front axle: 3,200kg / rear axle: 5,200kg), 77028 Chassis sealant Tectyl 300 G Clear, 00541 Battery disconnect switch mechanically mounted on the chassis, right, 07455 Weight variant front axle: 3,200kg / rear axle: 5,200kg, MAIN FEATURES, 08277 Heater for AdBlue tank, 75498 Fuel tank 120 liters, plastic, lockable, 02289 Fuel pre-filter on the frame, heated, 05267 AdBlue tank, 30 liters, FUEL EFFICIENCY & CONNECTIVITY, 00278 ConnectivityBox 4G, telematics contract optional, 01395 RADIO with Bluetooth, DAB+ and 7-inch DISPLAY, 02475 Tire pressure monitoring system (TPMS) sensors internally mounted, 14522 Adaptive cruise control (ACC), SAFETY, 78287 Lane departure warning system (LDWS), 02221 Extended driver attention warning system (Advanced Driver Distraction Warning), 02211 Warning triangle, design and dimensions according to ECE-27, 78714 Rear lights standard, 14861 Hill start assist, for comfortable starting on inclines, 05108 Hazard warning lights, 07888 Electronic stability program (ESP), 00407 Rear view monitoring system with camera, 00404 Blind spot monitoring system (BSIS), right, 00409 Intelligent speed assist (ISA), 00402 Front field monitoring (MOIS), 78484 Emergency braking assist (AEBS), 00914 Pneumatic parking brake, 00414 Preparation for alcohol interlock (ALC) with cable, OTHER, 03215 On-board tools, 00089 Two-stage engine brake. Can be activated using the right steering column lever, CAB EXTERIOR, 02704 Rear-view mirrors for body width 2600 mm, CAB INTERIOR, 75390 Electrical preparation for cargo area light, 08289 Preparation for toll system (OBU), includes antenna and wiring on the dashboard, without receiver unit, CHASSIS, 00568 Batteries 143 Ah, recommended for tail lift and auxiliary drive operation, 06315 Generator 2160 watts. Ledpjzurh Tofx Abyjhn

Condition: new, CANTILEVER RACK DOUBLE-SIDED | HEIGHT 200 CM | 200 KG PER ARM This double-sided cantilever rack is ideal for storing lightweight long goods such as pipes, profiles, battens, laths, rails, and other bulky materials in warehouses, workshops, or craft businesses. With an overall height of approx. 200 cm and cantilever arms of approx. 50 cm, the rack provides clearly arranged and easily accessible storage spaces on both sides. Thanks to 6 storage levels including the base, it offers ample storage capacity while saving valuable floor space. Each cantilever arm is loadable up to 200 kg. The robust construction ensures reliable performance in daily operations. FREE DELIVERY WITHIN GERMANY IS INCLUDED. Lhedpfj Aawqbex Abyon PRODUCT DETAILS: - Rack type: double-sided cantilever rack - Total length of rack row: approx. 3.91 m - Total height: approx. 2,000 mm - Usable depth per arm: approx. 500 mm - Usable depth of base level: 525 mm - Total depth: 1,150 mm - Center distance (upright spacing): approx. 1,250 mm - Maximum load per arm: 200 kg (with evenly distributed load) - Maximum load per upright: 1,000 kg (with evenly distributed load) - Storage levels per side: base + 5 - Design: double-sided, arms & anti-roll-off devices welded in place - Colour: RAL 7016 (anthracite grey) - Connectors & bracings: galvanized SCOPE OF DELIVERY: - 04 x uprights incl. base section made of IPE100, height approx. 2,000 mm - 40 x cantilever arms, approx. 50 cm long, RR 50x30x2 mm - Incl. all braces and required bolts - Incl. heavy-duty anchors Price: 1229.00 € net incl. delivery 1462.51 € gross incl. delivery You will receive an invoice with VAT shown separately. Delivery included: Nationwide free delivery within Germany, excluding islands. Fast processing and prompt shipping upon receipt of order. INTERESTED OR HAVE QUESTIONS? Simply contact us via message or phone. You can find our phone number on our company page. We are available by phone from Monday to Friday, 08:00 a.m. – 4:00 p.m. Alternatively, send us a message with your name and number and we will get back to you as soon as possible.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 1,000 h, This REIFENHÄUSER BI Trudes 115 was manufactured in 2013. Ideal for pipe extrusion, this machine represents a robust addition to any production line. Contact us for more information. Additional equipment • 2x electrical melt pressure transducer 1/2 “UNF diaphragm pressure transducer • 2x ground temperature sensor with sword probe Machine Benefits Qualitative Machine Benefits • 13x anchoring for one fixing point installation tool • Pair of worms, compact version, made of highly tempered steel and bimetal design • Counter-rotating twin-screw extruder, gearbox with integrated back pressure bearing for 350 bar • Recirculating oil lubrication with oil pressure and oil temperature monitoring • Barrel Ø 115-30 d with atmospheric and vacuum degassing openings • Heating and air cooling divided into 5 zones, total output of 56400 w • Vacuum unit for bt 115 including 2x vacuum unit and vacuum suction unit Lodpfex D Ewmox Abyehn • Complete screw temperature control including cassette installation • Mains supply with main switch and load disconnector for heating, drives, and auxiliary voltages Technical Machine Benefits • Stationary for an extrusion height of 1000 mm • Complete control cabinet with all necessary control and regulation equipment attached • Microprocessor-controlled multi-channel controller for two and three-point zones • Adaptive and self-optimizing control behavior • Fault messages with collective alarm and storage • Siemens mp377 touch panel for setpoint specification and actual value display • Recipe management of up to 20 recipes • Drive with one ac motor, vector-controlled • Digital drive controller for ac motors, with full digital technology • Motor temperature monitoring with pre-warning and shutdown Extra Information Machine still under power

Condition: used, Höcker Polytechnik frequency-controlled extraction system with an RSN ECO 40/12 briquetting press, designed to extract wood shavings and sanding dust from a small to medium-sized joinery or other woodworking workshop, complete with a connected hopper and briquetting press. Includes heat recovery and a number of extraction pipes with pneumatic dampers, suitable for equipping a workshop with approx. 5–10 machines. Technical data: Ljdpfx Absztvwieyjhn - Fan 1: 11 kW - Fan 2: 3 kW - Press: 4.5 kW - Filter bags: 50 - Briquette: ~ 60 x 40 mm - Filter area: ~ 54 m² - Air flow rate: ~ 3,200 m³/h

Condition: used, ZIM Hülsta Back Panel Saw Manufacturer: ZIM Hülsta-Werke Designation: Back Panel Saw Year of Manufacture: 2014 Serial Number: 380114008 Description: Lsdpevdb Tbsfx Abyjhn Movable saw unit 2 movable Benz four-spindle drilling units Suitable for milling and drilling operations Tilt drilling RWH drilling Sawing Sawing and RWH drilling Feed roller table Protective enclosure with Leutze laser barrier system Control cabinet Dust extraction piping Control terminal, consisting of: PC, flat-screen monitor EIZO FlexScan S1911 Keyboard and mouse, hand scanner, terminal cabinet Mobile steel container (beige) Handshake signals PC-PLC 1. Data handling is exclusively performed by the PC. 2. The clamping system sends a transmit release (VB.TransmitRelease) to the main PC, which then transmits the head and machining data. 3. The main PC activates a handshake (VB.DataSent) after the data has been transmitted. 4. Then, the VB.TransmitRelease and VB.DataSent are removed from the clamping system. 5. This procedure is triggered again for each new component. More new and used items can be found in our shop! International shipping costs upon request!

Condition: new, functionality: fully functional, SALVATORE ROBUSCHI RCC 32-20C cantilever pump – 5.5 kW – 15 m³/h Industrial vertical cantilever pump by Salvatore Robuschi, equipped with a vortex impeller and FELM IE3 three-phase motor. Assembly includes a long immersion column, separate discharge pipe, mounting plate and guarded coupling. Designed for installation above a tank or sump. The cantilever construction requires no submerged shaft bearings or bushes. Suitable for various industrial liquids and solids-laden liquids, subject to material compatibility and operating conditions. Type: RCC 32-20C Serial number: 2010042272 Nameplate date: 06/2022 Nameplate duty point: 15 m³/h at 12.3 m head Motor: FELM FA3-132S-4, 5.5 kW Supply: 400 V delta / 690 V star, three-phase, 50 Hz Rated current: 10.9 / 6.3 A Speed: 1,450 rpm Efficiency class: IE3 Protection: IP55; insulation class F Pump casing in corrosion-resistant cast stainless steel CF8M (EN 1.4408, cast equivalent of AISI 316) Lhedpfxs Aa Dbys Abyjn

Condition: used, Vötsch Shock Test Chamber VT 7012 S2 System for extreme temperature changes During temperature shock testing, the resistance of components, devices, and other products to rapid changes in ambient temperature is tested. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. These cyclic loads and accelerated aging caused by temperature changes can reveal weaknesses in the test specimen. Vertical arrangement of the test chambers Ball screw drive for secure guidance of the moving basket Load capacity of the moving basket: 50 kg for VT3 7012 S2 All-round grid in the moving basket secures the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber The warm chamber can be used as a temperature storage device, and the cold chamber as a temperature change device Minimal energy consumption No compressed air required Lhedpfxsx Exmto Abyen Manufacturer: Vötsch Type: VT 7012 S2 Type: Temperature shock test chamber Test chamber volume: 120 l Rated voltage: 400 V Rated power: 10 kW Rated current: 25 A Refrigerant: R452A Cooling unit: water-cooled Shock cooling optional (nitrogen cooling) via customer-side nitrogen supply External dimensions Width: 930 mm Depth: 2115 mm Height: 1970 mm Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class Device: IP 42 Control panel: IP20 Control cabinet: IP 54 Key figures for temperature tests in single-chamber operation Temperature range Warm chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: +_ 2 K in the steady state Temperature deviation spatially: +_ 2 K in the steady state in the moving basket Heating rate warm chamber: 11 K/min Cooling rate cold chamber: K/min Heating rate cold chamber: 2 K/min Cooling rate warm chamber: K/min Viewing window: 355 x 355 mm Pipe passage: 67 mm Year of manufacture: 2000 Operating hours: 104382 Weight: 1000 kg You can find more new and used items in our shop! International shipping costs on request!

Condition: good (used), mileage: 349,966 km, power: 130 kW (176.75 HP), first registration: 01/2016, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: intarder, color: silver, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: air conditioning, cruise control, electric window regulation, fog lights, power mirror, soot filter, spoiler, tail-lift, = Additional Options and Accessories = - Leaf spring suspension - Roof spoiler - EPS (Electronic Power Steering) - Particle filter - Radio/CD player - Side door - Toolbox = Additional Information = General Information Year of Construction: 2016 Axle Configuration Front Axle: Steered; Suspension: Leaf spring suspension Rear Axle: Suspension: Air suspension Weights Unladen weight: 8,600 kg Lhodpfxeu Uiars Abysn Payload: 3,390 kg GVW (Gross Vehicle Weight): 11,990 kg Functional Cooling Engine: Diesel and electric Condition Technical Condition: good Optical Condition: good Warranty Warranty: No liability for printing and typographical errors, changes, prior sale, and mistakes! Additional Information Please contact Emad Al Shogran for further information. Vehicle Number: 133 Mercedes Benz Atego 1 Carrier Supra 1250 / Air Conditioning / Eu6 / Tail Lift .: WDB96702510021014 Suspension: Leaf / Air Transmission: Automatic Air conditioning Engine brake Distance warning assistant Lane keeping assist EURO 6 - AdBlue Wheelbase: 4760 mm Refrigeration Unit Brand: CARRIER Type: Supra 1250 Cooling Engine: Diesel + Electric Interior Dimensions: Length: 6.65 m Width: 2.50 m Height: 2.50 m Special Equipment: Audio System: CD Radio Comfort (Bluetooth), Battery 165 Ah, Cockpit Standard, Driving Assistance System: Brake Assist (Active Brake-Assist), Driving Assistance System: Lane Keeping Assist, Electric windows, Fleetboard Dispopilot guide, Tinted windshield, Generator 100 A, Holder for Fleetboard Dispopilot, Communication interface, Fuel tank: 180 L plastic, LED light package, Frame extension, Spare wheel, Reversing warning signal acoustic (warning signal outside), Switch for tail lift, Seats in the cab: Driver's seat armrest, Seats in the cab: Driver's seat sprung comfort seat, Sun visor outside, Underrun protection side Additional Equipment: Emissions standard EURO 6, Axle configuration: 4x2, Front axle load 5.3 t, Approach/front mirrors, Exhaust pipe to the center of the vehicle, Exterior mirrors electrically adjustable, left, Compressed air tank steel, Low compressed air unit, Two-step entry, Cab: S ClassicSpace, Cab variant: ClassicSpace, Suspension: Leaf / Air, Front springs 4.4 t, Gearbox 6-speed - Type: G 71-6, Gearbox 6-speed - Type: G 90-6, Urea tank (AdBlue): 25 L, Lifting roof manual (steel), Rear axle bevel gear 390, Info display 10.4 cm with additional display, Body/Structure: Chassis, Engine 5.1 L - 130 kW Diesel (OM 934), Engine brake, Engine compartment encapsulation, Wheelbase 4760 mm, Disc brakes front and rear axle, Seat cover / Upholstery: Fabric, Seats in the cab: Front passenger single seat, fixed, Splash guard rear fender, Stabilizer rear axle, Steering system type cab, Tachograph / EG control device, Underrun protection rear fixed, Underrun protection front, Immobilizer, Permissible total weight 11.99 t Refrigeration unit brand: Carrier = Company Information = No liability for printing and typographical errors, changes, prior sale, and mistakes! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email:

Year of construction: 2010, condition: like new (used), functionality: unexamined, machine/vehicle number: TUBE-MATIC-1200-CNC-3376, Equipment: 3rd hydraulic function, Unused SAFOP,ITALY Make Heavy Duty Bevelling Machine Upto 1200 MM ,CNC,Siemens Control,available for Sale IN Southern PArt Of INDIA fore an very Attractive Price. Lhedpozrkwnsfx Abyen

Condition: excellent (used), mileage: 346,569 km, power: 130 kW (176.75 HP), first registration: 02/2020, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,760 mm, fuel: diesel, color: blue, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel-air, total length: 8,340 mm, total width: 2,540 mm, total height: 3,650 mm, Equipment: AdBlue, air conditioning, electric window regulation, fog lights, power mirror, soot filter, = Additional Options and Accessories = - Leaf spring suspension - EPS (Electronic Power Steering) - Particle filter - Radio/CD player - Side door - Toolbox = Additional Information = General Information Year of construction: 2020 License plate: 63bph6 Technical Information Number of cylinders: 4 Engine displacement: 5,132 cc Front axle: Steered; Suspension: Leaf spring suspension Rear axle: Suspension: Air suspension Weights Unladen weight: 6,813 kg Payload: 6,687 kg GVW: 13,500 kg Condition Technical condition: very good Optical condition: very good Warranty Warranty: No liability for printing and typographical errors, changes, prior sale, and mistakes! Further Information Please contact Emad Al Shogran for further information. Vehicle number: 32 Mercedes Benz 1318 / 4x2 / Euro 6d / Manual Transmission / Air Conditioning / 1 .: W1T96702610441435 Lhsdpfx Ajxdvc Tjbyon Suspension: Leaf / Air Transmission: 6-speed manual transmission Air conditioning Engine brake Distance keeping assistant Lane keeping assistant EURO 6d - AdBlue Wheelbase: 4760 mm Special equipment: Battery 165 Ah, Power windows, Tinted windshield, Transmission - manual transmission, Fuel tank: 180 L, plastic, Radio preparation (12V), Frame overhang - extension, Spare wheel, Switch for tail lift, Interface for fleet management system, Seats in the cab: Driver's seat, suspension seat comfort, Steel rims 7.50x19.5, Underrun protection, side, Preparation for Truck Data Center (fleet management system) Additional equipment: Emission standard EURO 6d, Axle configuration: 4x2, Axle load front axle 5.3 t, Approach/front mirrors, Exhaust pipe to the center of the vehicle, Exterior mirrors electrically adjustable, left, Cockpit Classic, Compressed air tank steel, Entry two-stage, Driving assistance system: Brake assistant (Active Brake-Assist), Driving assistance system: Lane keeping assistant, Cab: S ClassicSpace, Cab variant: ClassicSpace, Suspension: Leaf / Air, Suspension: Front springs 4.7 t, Generator 100 A, Transmission 6-speed - Type: G 71-6, Transmission 6-speed - Type: G 90-6, Urea tank (AdBlue): 25 L, Lift roof manually (steel), Rear axle bevel gear 390, Info display 10.4 cm with additional display, Body/structure: Chassis, Light and rain sensor, Air dryer heated, Engine 5.1 L - 130 kW Diesel (OM 934), Engine brake, Engine compartment encapsulation, Wheelbase 4760 mm, Disc brakes front and rear axle, Seat cover / upholstery: Fabric, Seats in the cab: Co-driver single seat, fixed, Splash guard rear fender, Stabilizer rear axle, Steering type cab, Tachograph / EG control device, Daytime running lights automatic, Underrun protection rear fixed, Underrun protection front, Preparation toll collection, Immobilizer, Permissible total weight 13,50 t = Company Information = No liability for printing and typographical errors, changes, prior sale, and mistakes! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email:

Year of construction: 2022, condition: ready for operation (used), Compressed air station manufactured in 2018. This Ingersoll Rand D480EC-A is part of a complete turnkey industrial system, featuring a primary rotary screw compressor, air treatment dryers, and buffer tanks. It includes a 2,000-litre pressure vessel and multiple refrigeration air dryers. If you are looking to get high-quality compressed air capabilities, consider the Ingersoll Rand D480EC-A machine we have for sale. Contact us for further details. Ledpfxs Adrpae Abyshn INGERSOLL RAND RS30i-A9.6-TAS- Machine Type: Oil-Flooded Rotary Screw Air Compressor (Total Air System / TAS Configuration)- Nominal Power / Input Shaft Power: 30 kW (40 HP)- Maximum Allowable Working Pressure: 9.6 bar (138 psi)- Flow Rate / Air Capacity (FAD): ~4.7 - 5.2 m³/min (164 - 184 CFM)- Motor Speed: 2970 rpm- Electrical Supply: 400 V / 3 Phase / 50 Hz- Gross Mass / Package Weight: 1150 kg- Sound Level: 69 dB(A)- Integrated Features: Xe-70M Microprocessor Controller, Integrated Refrigerated Air Dryer, Moisture Separator, Dual-Stage Coalescing Air Filters, Heavy-Duty Pre-Filters, High-Efficiency TEFC IP55 Main Motor- Piping Connections: 1.5" NPT DischargeINGERSOLL RAND RSE37n-A13- Machine Type: Rotary Screw Air Compressor- Installed Motor Capacity: 37 kW- Stage Pressure: 13 bar- Debit Volume / Air Flow Capacity: 6,90 m³/min- Suction Pressure: 1,0 bar- Full Load Current: 81 A- Motor Speed: 3600 rpm- Air End Model: EK140NK- Version: V4- Voltage / Phase / Frequency: 400V / 3 Ph / 50 Hz- Compression Medium: Luft- Total Weight: 952 kgINGERSOLL RAND D600EC-A- Machine Type: Compressed Air Refrigeration Dryer- Electrical Power: 1,77 kW- Power Supply: 230V / 1 Ph / 50 Hz- Coolant / Refrigerant: R407C (1,70 kg)- CO2 Equivalent: 3,016 t- Ambient Temperature Range (TS): +2 / +50 °C- Compressed Air Operating Temperature Range (TS): +5 / +60 °C- Compressed Air Maximum Operating Pressure (PS): 16 barg- Low Pressure Range (LP): -15 / 52 °C (20 barg)- High Pressure Range (HP): -10 / 120 °C (30 barg)INGERSOLL RAND D480EC-A- Machine Type: Compressed Air Refrigeration Dryer- Electrical Power: 1,77 kW- Power Supply: 230V / 1 Ph / 50 Hz- Coolant / Refrigerant: R407C (1,20 Kg)- CO2 Equivalent: 2,129 t- Ambient Temperature Range (TS): +2 / +50 °C- Compressed Air Operating Temperature Range (TS): +5 / +60 °C- Compressed Air Maximum Operating Pressure (PS): 16 barg- Low Pressure Range (LP): -15 / 52 °C (20 barg)- High Pressure Range (HP): -10 / 120 °C (30 barg)INGERSOLL RAND D240EC-A- Machine Type: Compressed Air Refrigeration Dryer- Electrical Power: 0,84 kW- Power Supply: 230V / 1 Ph / 50 Hz- Coolant / Refrigerant: R407C (0,40 Kg)- CO2 Equivalent: 0,710 t- Ambient Temperature Range (TS): +2 / +50 °C- Compressed Air Operating Temperature Range (TS): +5 / +60 °C- Compressed Air Maximum Operating Pressure (PS): 16 barg- Low Pressure Range (LP): -15 / 52 °C (20 barg)- High Pressure Range (HP): -10 / 120 °C (30 barg)STIA DRUCKBEHÄLTER 2000L- Machine Type: Vertical Compressed Air Storage Vessel / Receiver Tank- Volume: 2000 Litres- Maximum Allowable Pressure (PS): 10 bar- Test Pressure (PT): 14.3 bar- Minimum / Maximum Allowable Temperature (TS): 0 / 50 °CW+Z ROHRSYSTEM-TECHNIK DTS-40-HPI- Machine Type: High-Temperature Pressure Vessel / Buffer Tank- Maximum Allowable Pressure (PS): 16 bar- Minimum Allowable Pressure (PS): 0 bar- Minimum Allowable Temperature (TS): -10 °C- Maximum Allowable Temperature (TS): 250 °C- Volume (V): 71 L- Test Pressure (PT): 28.

Condition: used, mileage: 71,299 km, power: 85 kW (115.57 HP), first registration: 09/2020, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 7,274 mm, total width: 2,052 mm, total height: 2,660 mm, loading space length: 4,680 mm, loading space width: 1,800 mm, loading space height: 1,900 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Iveco Daily 35S12 EA8V HIMATIC High-Roof Maxi Van, 1st owner, 71,000 km, complete service history (Iveco, 2 copies available!) DRIVER'S SEAT CONVERTED TO A COMFORT SEAT WITH SEAT HEATING INSTALLATION OF DRIVER'S SEAT RAIL EXTENSION WHEELBASE 4100 mm 2 WHEEL CHOCKS 00614 PASSENGER SEAT, STANDARD 02181 EXHAUST PIPE IN THE CENTER 02215 WITHOUT WARNING TRIANGLE 04353 WITHOUT REAR WALL INSULATION 05108 HAZARD WARNING LIGHT 05596 1ST AID KIT 06654 AUXILIARY HEATER (HOT WATER) WHEEL ARCH MUD FLAPS 06767 REAR DOORS, 270° OPENING 07196 A/C COMPRESSOR, 170CCM 08623 PARABOLIC SPRINGS 72619 STEERING COLUMN, ADJUSTABLE IN 2 DIRECTIONS 73182 WITHOUT SIDE VEHICLE MARKINGS 75223 SWITCH FOR BODY LIGHTING 75967 MARKET-SPECIFIC SIGN 76104 MANUAL AIR CONDITIONING SYSTEM 76133 WITHOUT MAINTENANCE INDICATOR STANDARD ARMREST DIGITAL RADIO DAB CENTRAL STORAGE COMPARTMENT + USB 481678, dated 21.02.2020 SEAT COVERS FOR DRIVER AND PASSENGER RUBBER FLOOR MATS, FRONT INSTALLATION OF REAR VIEW CAMERA WITH MONITOR FINE DUST STICKER (GREEN) SORTIMO FIT-OUT INSTALLATION OF RIBBED METAL SHEET ON PARTITION GRAB HANDLE ON A-PILLAR etc. Appointments and test drives can be arranged by phone. Lodpfx Ao Abvzuebyshn The information provided on the internet is a non-binding description. It does not constitute guaranteed characteristics. The seller is not liable for typing and data transmission errors. Errors and prior sale are subject to change.

Condition: new, For sale: High-quality steel compensator (compensating hose / Ringwellschlauch) from the renowned brand BOA, designed for industrial applications. This component is used for: - compensation of thermal expansion - vibration and noise damping - reduction of stresses in piping systems Manufactured from stainless steel 1.4404 (INOX), it is perfectly suited for demanding operating conditions (water, gas, industrial, and process installations). ⚙️ Technical Specifications Manufacturer: BOA Nominal diameter: DN125 Length: 1500 mm Pressure rating: PN16 Material: stainless steel 1.4404 (INOX) Type: compensating hose / steel compensator Lhedpfx Aez Smkqjbysn Connections: flanged Construction: corrugated hose with stainless steel braid Standards: ISO 10380 / DIN 📏 Dimensions Approx. internal diameter: 125 mm Total length: approx. 1500 mm ✅ Benefits ✔ reputable manufacturer BOA ✔ excellent corrosion resistance ✔ long service life ✔ vibration and stress damping ✔ flexible design ✔ fast installation (flanged) 📦 Scope of delivery 1x compensator DN125 (as shown in the photos)

Condition: as good as new (ex-display), functionality: fully functional, This single-sided heavy-duty cantilever rack is ideal for storing heavy long goods such as pipes, profiles, metal bars, steel beams, wooden strips, and sheet material. With a total length of approximately 13.20 meters, a height of approximately 4.00 meters, and cantilever arms of approximately 120 cm, this long goods rack offers a high storage capacity across a total of 4 storage levels (floor level + 3 levels). Each cantilever arm supports up to 500 kg, and the uprights can support up to 2,250 kg. The cantilever arms are bolted on and can be flexibly adjusted in height via a hole grid of 200 mm. The completely hot-dip galvanized material ensures long-lasting protection both indoors and outdoors – new goods available from the Wietmarschen warehouse. PRODUCT DETAILS: - Rack type: single-sided heavy-duty cantilever rack - Total length of the rack row: approx. 13.20 m - Total height: approx. 400 cm - Arm length: approx. 120 cm (made of IPE 80) - Center distance (upright spacing): approx. 131 cm - Levels: floor level + 3 storage levels Lhsdpfe Adzdtjx Abyen - Load capacity per arm: max. 500 kg (with uniform distribution) - Load capacity per upright: max. 2,250 kg (with uniform distribution) - Upright profile: IPE 160, approx. 400 cm, including base - Hole grid upright: approx. 20 cm - First hole above base: approx. 107.5 cm (from top of base) - Top hole pair: approx. 50 cm below the upright head (from top of head) - Design: single-sided, cantilever arms bolted on - Surface: completely hot-dip galvanized - Availability: new goods SCOPE OF DELIVERY: - 11 x uprights, approx. 400 cm made of IPE 160, including base, hole grid 20 cm - 33 x cantilever arms, approx. 120 cm made of IPE 80 (without end stops) - Including all connecting elements - Including all necessary screws - 1 x load sign Price: €5,750.00 net €6,842.50 gross You will receive an invoice with VAT shown. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery by our partner shipping company – freight costs depend on the postal code - Professional assembly and disassembly by trained teams is optionally available - Rack inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers is also possible PLANNING & CONSULTATION: Our planning department will be happy to prepare a non-binding offer for you – tailored to your individual requirements. Whether it's a new installation, renovation, or expansion – we will provide you with competent advice on your rack configuration. Haven't found the right one yet? Visit our website – here you will find a quick overview of many offers and variations of the products! ARE YOU INTERESTED OR DO YOU HAVE QUESTIONS? Simply contact us via message or phone call. You will find our telephone number on our company website. You can reach us by telephone from Monday to Friday, 08:00 - 16:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Condition: excellent (used), pressure: 3 bar, temperature: 134 °C, type of input current: three-phase, input voltage: 400 V, usable tank capacity: 2,500 l, Used Becomix production plant consisting of main mixer RW2500 and pre-mix vessel AB1200 for mixing, dispersing, homogenizing and emulsifying on an industrial scale. Originally used for sterile skin care products. Very good condition, complete factory overhaul planned (new seals, piping, pneumatics and control, homogenizer and drives overhauled), new stainless steel platform included. MAIN MIXER RW2500 • Working volume approx. 600–2,500 L, total volume approx. 3,458 L, 316L mirror polished • 0–3 bar, vacuum to -1 bar, up to 134 °C, jacket, TÜV approved • Anchor agitator with PTFE scrapers approx. 30 kW, rotor-stator homogenizer approx. 45 kW (5–25 m/s) • Recirculation line DN100, hydraulic lid Lhsdps Ad H Iqjfx Abyen PRE-MIX VESSEL AB1200 • Working volume approx. 400–1,200 L, turbo agitator, two-zone heating, transfer line FURTHER EQUIPMENT • CIP for both vessels incl. CIP rack, CIP/SIP capable, aseptic valves • Water ring vacuum pump approx. 200 m³/h, powder suction and liquid dosing • New Siemens PLC with touch panel, recipe control, GMP documentation SERVICE • Turn-key installation and commissioning available • 12 months warranty (excluding wear parts) Inspection in Weyhe near Bremen, Germany, by appointment. Questions or more photos? Simply send us an inquiry. Offer subject to prior sale by an independent dealer, not affiliated with the manufacturer.

Year of construction: 1997, condition: used, Cutting speed copper/aluminum: 80m/min, structural steel/steel pipes: 65-85m/min, C45/comparable steels: 55-80m/min, C60/comparable steels: 55-65m/min, 34CrMo4: 40-60m/min, 42CrMo4: 40-55m/min, 10CrMo9-10: 30-50m/min, high-alloy steels: approx. 20-40m/min, connected load: 5kW, rated current: 16A, weight: 1.75t, an on-site inspection is possible. Ledpfx Abo Adt Epeyehn

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.510 - EURO 6, optionally with F905 incl. L436 fly jib and V20 winch!!! Tipmatik - automatic transmission 8x4 Hydrodrive Lsde Ad Sw Repfx Abyjhn Three steered axles STEERING/LIFT axle Front outriggers approx. 14,000 KG Platform body with sideboards 6200x2550x600 mm Footsteps Diamond plate floor Removable sideboards 9 x LED lights Overwidth markings extendable to 3500 mm width Start/Stop Rotating beacon 8 x rung pockets 6 x lashing points 6500daN Toolboxes Trailer hitch Storage compartments Storage boxes 20-foot container locking Perforated side profile lashing points 2500daN Crane: FASSI F905R.2.7, with fully hydraulic 4-point outrigger system, with 6 hydraulic extensions on the main boom, fly jib L436 with 6 hydraulic extensions, rope winch, cross-type radio remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), accessories complete for winch operation, tiltable sheave, quick coupling between main boom and fly jib, and more... TECHNO SERIES!! NEW CRANE MODEL Slew range infinite All hydraulic cylinders double-acting Piston rods hard chrome-plated Double knuckle system with PROLINK (over-extendable knuckle arm up to 10°) Electronic overload protection with FX800 FASSI stability control FSC-S/2 incl. LMB II Emergency stop as well as optical alarm (90% and 100%) Pressure relief and load holding valves XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS radio remote control with linear levers and display of pressure range (in bar and %) and 90% + 100% warning on the display Danfoss D900 control block with 4 control valves mounted on the crane pillar Emergency operation for crane control High-pressure filter is supplied with piping Separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base Hydraulic outriggers, extendable hydraulically on both sides, outrigger width 10.00m, Outriggers can be operated via radio remote control Standard color RAL 3020 traffic red - all cylinders painted black IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control Load hook and attachment bridles (short/500mm) Driving position: folded transversely to the direction of travel Note: Observe the onboard voltage / 12V or 24V, standard 24V" FASSI stability control FSC-TECHNO Fassi V7S radio maxi - 8 linear levers Proportional control block for the outriggers 180° hydraulically swiveling support legs / on both sides Preparation for operation with variable pump (LS) Control system for 2 additional functions with 2 hose lines / hxp-techno Additional knuckle arm (jib) L436, extendable hydraulically in 6 steps Jib Double Power (JDP) Multi-coupling with cable duct for jib mounted for 2 functions Control system for additional function - rope winch Rope winch type V20 - 2,000daN, 60m rope (12mm) with LMB and mechanical Permanently mounted rope guide for operation with additional knuckle arm (jib) AWC - (Automatic winch Control) for crane - Automatic rope winch control AWC - (Automatic winch Control) for JIB - Automatic rope winch control Work spotlights can be operated via display or radio remote control 1 LED work spotlight mounted on the knuckle arm 1 LED work spotlight mounted on the jib LED for 2 outriggers, not mounted (crane) LED for 2 outriggers, not mounted (additional support strut) Electric rotary distributor with 14 slip contacts 1 zinc primer from 720RA to F820RA Zinc primer for JIB "L42" Additional cost for Dinitrol applicat

Condition: used, fuel type: diesel, Equipment: air conditioning, AdBlue system: Yes Year of manufacture: 2018 Operating hours: 7.882 Drive: Wheel Empty weight: 19.580 kg Make of engine: Isuzu Top speed: 35 km/h Please contact Kristoff Van Havere for more information = Additional options and accessories = - 2-piece boom - Ad blue - Additional hydraulics - Auto / hydraulic quick coupler - Auto lubrication system - Battery disconnector - Blade - Boom suspension Ljdoza Rn Ropfx Abyohn - Hammer/shear hydr. circuit - Hydraulic adjustable boom - Pressurized cabin - Quick coupler - Rotating beacon - Safeload indicator - Safety line rupture valve - boom/hoist - Safety line rupture valve - dipper/stick - Slope/rotator hydr. circuit = Remarks = - Hydraulic quick hitch CW30 - Bucket 1800mm - Piping for hammer and sorting grab - Central grease system - Auxiliary piping for hammer and sorting grab - Cab overpressure filter unit

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 1,800 mm, stack height: 1,500 mm, Think Green, Box On Demand, pay attention to your CO2 footprint. The machine for processing continuous corrugated board, listed here, belongs to the series of statically operating machines, meaning that the operations performed across the width of the machine are carried out on the stationary cardboard. The machine is designed for high productivity. The maximum working width of the cardboard is 1,800 mm. All tool settings are performed automatically. 1) Main machine body (cardboard cutting machine): Linear cross-cutting group for head/foot cuts and cross cuts on the cardboard. Linear cross-scoring group for cross scoring on the cardboard. (Delivered as a cross scorer, cross scorer with perforation option) 8 sets of longitudinal scoring groups from above for longitudinal scoring on the cardboard. 8 sets of longitudinal cutting groups for performing longitudinal cuts. 2) Cardboard changer, 4-cassette feeder A motorized cardboard changer, operated with a lifting shaft, is used to feed the cardboard into the cardboard infeed of the main machine body, using 4 individual cassettes. Each cassette is capable of accommodating a web width of raw material up to a maximum of 1,800 mm and automatically feeding it to the main machine body on request from the machine control. Lhsdpsz Tdaqjfx Abyjn 3) Cardboard magazines, 4-fold 4 cardboard magazines provide and feed the raw cardboard to the processing machine. Stack height of continuous corrugated board up to max. 1,500 mm possible. 4) Control cabinet, control system, electronics: Contains all the components required to operate and control the system. The control cabinet components are based on Siemens.