Used Corn Chopper for sale (247)

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 622, overall weight: 250 kg, Corner Crimping Machine Iodpow Huctsfx Ag Ueht

Condition: used, Year of construction: 2014, PRESSTA 2000 – Corner crimping machine Key Technical Specifications (Pressta 2000) Manufacturer: Pressta-Eisele Type: Corner Crimping Machine (PV 8 model sometimes mentioned) Operation: Hydro-pneumatic Dimensions (W×H×D): 900 × 1,180 × 750 mm Weight: ~360 kg Operating Pressure: 8 bar Air Consumption: 40 l/stroke at 8 bar Pressing Force: 32 kN at 8 bar Press Stroke: 17 mm Return Stroke: 140 mm Max. Pressing Height: 150 mm Max. Profile Height: 210 mm Ihsdpfxex R R Tij Ag Ust Air Connection: R ¼''

Condition: used, Year of construction: 2009, overall weight: 500 kg, compressed air connection: 7 bar, Pressing height 140 mm Pressing force 70 kN (7 t) Pneumatic drive Power supply 230 V, 1~, 50/60 Hz Compressed air supply 7 bar Isdox R R Rnspfx Ag Ueht Air consumption per working cycle 35 l Length 1,100 mm, depth 950 mm, height 1,230 mm, weight 545 kg

Condition: ready for operation (used), Year of construction: 2021, operating hours: 11,537 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, workpiece length (max.): 1,030 mm, Wire EDM machine from 2021 with only 11,537 operating hours! TECHNICAL DETAILS Travel Distances X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 350 mm Workpiece Data Workpiece weight: 1,000 kg Workpiece height: max. 350 mm Workpiece width: max. 800 mm Workpiece length: max. 1,030 mm Table Data Table width: 630 mm Table length: 950 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,400 x 2,160 x 2,320 mm Overall weight: 5,440 kg EDM hours: 11,537 h Power-on hours: 29,381 h Type of mains supply: 3-phase current EQUIPMENT Manual central lubrication for CUT E series Heat exchanger kit Ijdpfx Aex I Akujg Ueht Large wire spool accommodation 25 kg, CUT E series Wire chopper for CUT E series Signal lamp Note: Dismantling and loading can be carried out by the seller at an additional cost.

Condition: used, Comprehensively tested and refurbished, used Kemutec Kek model 200 EC 316 Stainless Steel Jacketed Ribbon/ High Speed Mixer. Manufacturer: Kemutec Material: 316 Stainless steel Capacity: 200 litre working capacity. 215 litre total capacity (product dependent) Mixing trough: 565mm diameter X 860mm long. Discharge Type: Centre bottom discharge with manual plug type valve Type Of Blades: Cantilever design with bolted double ribbon mixing blade Motor: 7.5 kw 400 volt 3/50 & 480 volt 3/60 11460 rpm motor via David Brown Radicon gearbox rated 15.5/1 Revolutions Per Minute: 53RPM Also includes: Hinged lid and end cover. -Spare double ribbon and t-arm mixing blades. -Provision for chopper but none fitted. -Stainless steel jacket rated 4.4 bar design pressure at 154.83 degc. -Internal rated atmospheric pressure at 50 degC. -Mounted on mobile base. A video of this mixer is available below. Specifications: Capacity: 200 L Isdpfxoyanxyo Ag Ueht Material of construction: 316 Stainless steel Width: 565 mm Horsepower: 7.5 kW Length: 860 mm Jacket: Yes Jacket Pressure: 4.4 bar

Condition: used, Comprehensively tested and refurbished, used Morton-Lödige model FKM600 stainless steel jacketed ploughshare type mixer. Manufacturer: Morton Material: Stainless steel External Jacket: Stainless steel rated 5.5 Bar design pressure at 162 deg.c. Capacity: Approximately 150-450 litre working capacity, 600 litre total capacity (product dependent) Discharge Type: Bottom bomb door style with pneumatically operated door. Type Of Blades: Stainless steel shaft with Becker-shovel type blades Motor: 22kW motor with gearbox Ihodpfx Agjyanxts Uot Also includes: Provision for (2) side entry choppers. (Not fitted).

Condition: used, Comprehensively tested, used stainless steel Aeromatic Fielder model GP1 VP mixer / granulator. Ihjdpfx Agsx Tib Re Uet Manufacturer: Aeromatic Material: Stainless Steel Capacity: 10 litres Type of Blades: Bottom entry 3-blade mixer with drive, and a side entry chopper. Also includes: Jacketed removeable bowl and local controls. Various inserts to reduce bowl capacity. Unit is mounted on mobile base.

Condition: used, Comprehensively tested and refurbished, used Winkworth model RT400 316 stainless steel high speed ploughshare mixer. Material: Stainless steel Capacity: 400 litre (product dependent) Iodpfxex Rytro Ag Usht Mixing trough: 1,300mm long x 800mm diameter Discharge Type: Centre bottom pneumatically operated flap discharge value Type Of Blades: Ploughshare blades Motor: 11kw, 380-415 volt, 3/50, 1450-1460rpm motor through Custom Power Transmission gearbox type MO820 Revolutions Per Minute: 99rpm Also includes: (1) stainless steel side entry chopper driven by 4kw, 380-415volt, 2840-2870rpm, 3/50 motor. A video of this mixer is available below. Specifications: Bowl Volume: 105 gal Motor Power: 11 kW Material Of Construction: Stainless Steel Choppers (Y/N): Y Number Of Choppers (1-10): 1 Horsepower Of Choppers: 4kW RPM Of Choppers: 2840 - 2870 HP Of Unit: 11kW Revolutions Per Minute: 1450 - 1460 Vacuum Internal (Y/N): N Jacket (Y/N): N Jacket Pressure: N/A Jacket Temperature: N/A Weight: N/A Dimensions: 1,300mm long x 800mm diameter

Condition: used, Comprehensively tested, used WINKWORTH model RT80 stainless steel jacketed high speed mixer. Manufacturer: Winkworth Model: RT80 Material: Stainless Steel Capacity: 120 litre, working capacity 80 litre Agitation: Shaft equipped with 4 mixing blades driven by 7.5 kw, Hp 10, Rpm 30/150, 380 volt motor. Stainless steel chopper driven by 5.7/4.7 kW, 50Hz, 2900/1450 rpm, 380-415 V Also includes: Stainless steel jacket rated 3.5 bar at 200 DegC, 2000 watt hot water heating skid. Local controls. Specifications: Bowl Volume: 31.7 gal Motor Power: 7.5 kW Material Of Construction: Stainless Steel Choppers (Y/N): Y Number Of Choppers (1-10): 1 Horsepower Of Choppers: 4.7 - 5.7 kW RPM Of Choppers: 1450 - 2900 HP Of Unit: 7.5kW Ijdpfx Agox Ryq Ds Ueht Revolutions Per Minute: 30 - 150 Vacuum Internal (Y/N): N Jacket (Y/N): Y Jacket Pressure: 3.5 Bar Jacket Temperature: 200 Deg.C.

Condition: used, Comprehensively tested and refurbished, Used Winkworth model RT200 stainless steel high speed ploughshare (T-Arm) mixer. Manufacturer: Winkworth Material: Stainless Steel Capacity: Approximately 200 Litre Capacity Mixing chamber: Approximately 1,000mm x 650mm Diameter Discharge Type: Centre Bottom with Discharge Valve Type Of Mixer: T-Arm Blades Motor: 11kW SEW Geared Motor Also includes: Stainless Steel Side Entry Chopper Driven by 4kW Motor. Tote lifter (Max 150 kg) and 2 off stainless steel totes. Click on the link below to see a video of the machine running. Specifications: Bowl Volume: 52.8 gal Motor Power: 14.8 hp Iedpfx Aex Rylnjg Ueht Material Of Construction: Stainless Steel Choppers (Y/N): Y Number Of Choppers (1-10): 1 Horsepower Of Choppers: 5.362 HP Of Unit: 14.751 Weight: 150 Dimensions: 1000mm x 650mm Diameter

Condition: used, breader suitable for standard and Japanese crumbs and corn flakes all stainless steel mobile adjustable speed belt width 900 mm with extra outfeed belt with air knives dimensions (l x w x h) : ± 3.200 x 1.800 x 2.200 mm 2,73 kW Ihjdpjwdgiyjfx Ag Ust

Condition: used, breader suitable for standard and Japanese crumbs and corn flakes Ihodpfex S E I Djx Ag Ust all stainless steel mobile adjustable speed with air knives with pressure roler belt width 1000 mm dimensions (l x w x h) : ± 2.800 x 1.850 x 2.500 mm

Condition: used, Year of construction: 1993, Manufacturer : Glatt Model : VG-25 Year : 1993 Type: Universal high shear granulator / mixer Capacity : 25 Litres Useful capacity: 5 - 18 Litres Empty weight: 450 Kg Compressed air: 6 - 10 bar Double jacket: yes Water pressure: 2 - 6 bar Main mixer: 30 - 600 rpm Power : 5,5 KW Chopper: 300 - 3000 rpm Iodpfsx S R H Ejx Ag Ueht Power : 1,5 KW Variable speed drive: electric x2 Liquid spraying : Watson Marlow peristaltic pump Discharge valve: Manual Mobile chassis: 4 wheels Video :

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 483, Casemaker, Automatic production of book cases, files, display cards, calendar backs, game boards or luxury packaging. Co-Pilot with touchscreen, Automatic case counter, Board magazine for manual loading, Centre strip infeed (flexible), Waste chopper, Cloth feeder, Glue unit, Preheated glue tube, Viscosity control, Device for inside lining with hotmelt, Device for producing padded cases, Pressing station, Tacking delivery. Ihedpfx Agjx Ryr Ie Uot

Condition: good (used), Brake module, brake unit, brake chopper, brake control module, brake rectifier -Manufacturer: SEW Eurodrive, brake control module -Type: BMV5.0 Iedpex T Ay Hjfx Ag Ujht -Input: 24V DC -Quantity: 1x brake module available -Dimensions: 75/25/H95 mm -Weight: 0.2 kg

Condition: used, Manufacturer: WAM Model: WBH550 Type: Ploughshare mixer Ihodpfx Aox R D Imog Uet Total volume: 550L Capacity: 155 - 385 L Material: stainless steel Main motor power: 9.2 kW ATEX tulip-shaped chopper: 3 kW Bearing seal: air purge Filter support Bag emptying hopper Drain valve: pneumatic Secondary drain valve: manual Electrical cabinet with speed variation Dismantled platform available with equipment including: mixer support, platform, and stairs.

Condition: used, Year of construction: 2016, // Equipment dismantled and stored in our warehouse // Manufacturer: Italvacuum Model: Cosmodry System IHD 3200 Year: 2016 Type: horizontal vacuum paddle dryer Application: drying wet powders ATEX (Eex) unit: yes Industries: Fine chemicals, pharmaceuticals (API), intermediates A) Agitation: Concentric agitator with heated shaft, removable in several segments (double mechanical seal) Transmission: (CEMP) - Power 30 kW + Gearbox + Chain Agitation speed: 1.6 ÷ 8.1 rpm Atex: explosion-proof ATEX II 2GD Mounted with the dryer on a support structure (single SKID) B) Drying chamber with discharge valve Total volume : 3200 Liters Useful volume : 30% - 80% Internal pressure : -1 / 0,5 barg Jacket pressure : 0 / 1,7 barg Project temperature : -10 / +130°C Maximum heating fluid temperature: +100°C Best vacuum tightness: 4 mbar/h EX-I absolute pressure transmitter PT100 Ex-i product temperature sensor Nitrogen backwash system Rotary chopper speed: 300 / 1200 rpm (not installed) Material in contact with the product: AISI 316L - EN 1.4404 Vacuum seals: PTFE and FEP Jacket material: AISI 304 - EN 1.4301 Heating fluid: Diathermic oil Mirror-polished interior finish (Ra ≤ 0.4 µm) Satin exterior finish (Ra ≤ 1.2 µm) Inspection and Shut-off Valve DN.1650 Buffer Relief Valve DN 200/300 DN 250 Butterfly Loading Valve Prepared for the installation of two choppers (lateral knives) C) Process filter D) Vacuum unit: SAURUS939 piston vacuum pump, model VVDPump support benchATEX: Ex-d-IIB-T4 – IP55Power: 11 kWAtmospheric pressure surface condenser, model VD200I Iedpfxjx R D Efo Ag Usht E) Vacuum condensing unit - AISI 316L stainless steel with double cooling jacket in AISI 304 stainless steel. Internal design pressure: -1 / 0.5 barg Jacket design pressure: 0 / 3 barg Design temperature: -10 / 40 °C Maximum cooling liquid pressure: 2.5 bar Exchange surface area: 8.5 m2 Condensate collection capacity: 900 litres Level sensor F) External safety filter G) Temperature control system: Heating/Cooling Steam liquid heater: Pressure 7 bar - Jacket temperature: 142°C - Surface area: 1.65 m2 Cooler, mounted on the heater: cold water or brine - Pipe jacket pressure: 12 barg - Jacket temperature: 142°C - Pipe temperature: -10°C /+ 99°C - Surface area: 3.42 m2 H) Command and Control System (Electrical Cabinet + HMI) Complete technical file

Condition: used, Year of construction: 1997, Manufacturer : Aeromatic TK Fielder (GEA) Model: Pharma Matrix 150 Year : 1997   Type : Granulator / high speed mixer Application : Granulation Sector : Pharmaceutical / Chemical / Cosmetics   Material : stainless steel Tank volume : 150 L Jacket : 2 bars / 80°C max Iodex R Dbmspfx Ag Ujht Main agitation : 130 - 260 rpm Power : 11 KW Variable speed drive: electric Chopper / granulation: 1500 / 3000 rpm CIP self-cleaning: seals and tank GMP: Good manufacturing practice : safety / contamination CASTELL safety key Discharge valve: pneumatic Bag filter Primary sealing: inflatable seal Secondary seal: compressed air purge Compressed air: 6 bars Electrical cabinet Video available in operation Digital documentation

Condition: used, This listing is for the Thermo Scientific Heratherm IMH180 Incubator The unit is in full working condition and is ready for immediate use The Thermo Scientific Heratherm IMH180 is a high-performance, reliable incubator tailored for demanding laboratory tasks: Precision: Excellent temperature control and uniformity. Flexibility: Adjustable airflow, generous interior volume, and timer options. Convenience: Viewing window, internal socket, and connectivity via RS‑232. Cleanability & Space Efficiency: Stainless steel interior and stackable design. Advanced Safety (Security Model): Door alarms, lockable access, and high-temperature decontamination. Perfect for microbiology, cell culture, pharmaceutical testing, and drying applications where sample integrity and process control are critical. Design & Functionality Dual Convection Technology: Offers adjustable fan speed from 0 % (natural convection) to 100 %, enabling tailored air circulation depending on the sample type or protocol Temperature Range: Operates from 5 °C above ambient up to 105 °C, making it suitable even for drying tasks Temperature Uniformity & Stability: With fan off: ±0.6 °C spatial uniformity With fan at full speed: ±0.2 °C to ±0.4 °C uniformity (at 37 °C) Temporal stability: ±0.1 °C (at 37 °C) Capacity & Build Iedpfx Agoxhd Ixe Usht Interior Volume: 178 L (about 6.3 cubic feet) Shelving: Comes with 2 stainless-steel shelves (each supporting up to ~25 kg) and can accommodate up to 19 shelves for flexible arrangement Construction: Corrosion-resistant stainless steel interior (AISI 304) with easy-to-clean rounded corn Controls & Usability Controller: Microprocessor-based with a clear vacuum fluorescent display for easy setting of temperature, timers, and monitoring Timer Functionality: Programmable daily, weekly, or real-time ON/OFF cycles for scheduling experiments Extras: Internal power socket (120 V models) for operating devices like shakers or stirrers inside the chamber Internal glass viewing door and optional internal lighting for observing samples without opening the chamber RS‑232 interface for data logging and connectivity Stackable design without tools—efficient laboratory space use Safety & Maintenance Alarms: Automatic over- and under-temperature alert system protects sample integrity Security Model (IMH180‑S): Adds a lockable outer door and audible alarms for door‑open conditions Includes a certified 140 °C decontamination cycle (about six hours) to sterilize the chamber without needing an autoclave—ideal for high‑sterility environments Dimensions & Electrical Specs Feature Specification Exterior (W × D × H) 64 × 74 × 92 cm (25.2 × 29.1 × 36.2 in) Interior (W × D × H) ~46 × 54 × 70 cm (18.3 × 21.4 × 27.9 in) Weight ~70 kg (154 lb) Electrical (120 V) 1,020–1,390 W; 8.5 A at 60 Hz Materials Stainless steel (interior), durable housin

Condition: used, mileage: 279,000 km, power: 360 kW (489.46 HP), first registration: 01/2023, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, total length: 5,990 mm, total width: 2,530 mm, total height: 3,960 mm, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, differential lock, electric window regulation, fog lights, fridge, parking heater, spoiler, = Additional options and equipment = - Aluminum fuel tank - Rear work lights - Front work lights - Roof spoiler - Differential lock - Remote central locking - Windscreen - Speed limiter - Tipping hydraulics - Radio/CD player - Sleeper cab - Side skirts - Sun visor - Stability control - Parking heater - Pre-heating system - Xenon lighting - Power Take-Off (PTO) Ihodpfxsx Uq U Ie Ag Uot = Further information = Maximum front axle load: 8,000 kg Rear axle: Differential lock; Max. axle load: 11,500 kg Number of cylinders: 6 Engine displacement: 12,777 cc Unladen weight: 8,355 kg Payload: 12,645 kg Gross vehicle weight (GVW): 21,000 kg Please contact Bastien Begemann or Corne Visser for further information.

Condition: used, mileage: 1,260,000 km, power: 324 kW (440.52 HP), first registration: 05/2013, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, total length: 5,960 mm, total width: 2,550 mm, Year of construction: 2013, Equipment: ABS, air conditioning, central locking, differential lock, electric window regulation, fog lights, fridge, parking heater, spoiler, = Additional Options and Equipment = - Aluminum fuel tank - Rear work lights - Front work lights - Roof spoiler - Differential lock - Windscreen - Speed limiter - Air horn - Radio/CD player - Sleeper cab - Sideskirts - Sun visor - Stability control - Auxiliary heater - Pre-heating system - Xenon lighting Ihsdpfxex Tf Rnj Ag Uot = Further Information = Technical information Number of cylinders: 6 Engine displacement: 12,742 cc Maximum front axle load: 7,500 kg Rear axle: Differential lock; Max. axle load: 11,500 kg Weights Unladen weight: 7,520 kg Payload: 11,480 kg Gross vehicle weight: 19,000 kg Functional Cargo space capacity: 700 l Maintenance APK (roadworthiness inspection): valid until 05/2026 Further information Please contact Bastien Begemann or Corne Visser for more information.

Condition: used, Cutting sieve, shredder sieve, sieve basket, sieve for chopper, shredder system, single-shaft shredder, shredder, granulator, shredding machine -Perforation: 65 x 65 mm -Recording holes: Ø 75/30 mm -with supporting ribs -Drawing with the pictures -Dimensions: 1600/1844/H620 mm -Weight: 696 kg Iodpfx Ageb Hiylo Ueht

Condition: good (used), Cutter knife, cutter knife for chop chopper, chop cutter, dicer, multi-purpose cutter, slicer and portion cutter -Manufacturer: Knecht, cutter knife 2 pieces -Type: R320 5 220 428 92 -Price/Delivery: complete -Transport dimensions: 370/230/H40 mm -Weight: 2.8 kg Iodpfx Ajvwlxhog Ujht

Condition: good (used), Cutter knife, cutter knife for chop chopper, chop cutter, dicer, multi-purpose cutter, slice and portion cutter, -Manufacturer: Holac, cutter knife -Type: 29-0228-0/1 Ihsdpsvwlzijfx Ag Ujt -Hole: Square 26 x 26 mm -Quantity: 1x knife. available -Dimensions: 540/350/H65 mm -Weight: 4.4 kg

Condition: used, Braking resistor, charging resistor, damping resistor, filter resistor, braking chopper -Manufacturer: SEW Eurodrive, braking resistor type BW 072-003 -Item number: 802 265 8 826 058 3. Ihodpfx Agoq Untrj Ujt -Power: 75 Ohm/250W -Quantity: 1x resistors available -Dimensions: 110/80/H15 mm -Weight: 0.3 kg