Used Copper Wire Drawing for sale (5,263)

Condition: good (used), Drawer cabinet, Schäfer Shop, 8 drawers – used: Price ex works: €400 (net)! Bdsdozp Rv Espfx Aa Ijh Item 3: Manufacturer: Schäfer Shop Type: unknown Year of manufacture: unknown Dimensions: approx. 100x70x100cm 8 drawers of different heights Condition: good Available: immediately Location: Leipzig

Year of construction: 2023, condition: new, Cable stripping maschine ,wire stripper Technical Data: Bedpfok Ra Tuex Aa Iodh Dimensions: W / H / D 75 cm / 68 cm / 86 cm Weight: app. 95 Kg Color: blue / yellow Cutting speed: app. 48 Meter per Minute Engine: 230V / 3000 W

Condition: good (used), Drawer slide, telescopic slide, drawer extension, drawer rails, drawer extension Telescopic slides, extension slides, heavy-duty extension Bdedpfsg Dvx Tex Aa Ish -Retracted length: 600 mm -Extended length: 1100 mm -Width: 14 mm / Height: 24 mm -Price: per pair (left right) -Number: 4 pairs available -Weight: 1.5 kg/piece

Year of construction: 2006, condition: refurbished (used), AGIECUT Challenge 3 eCut Year of manufacture: 2006 Travel ranges: X = 500 mm, Y = 350 mm, Z = 256 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.2 µm Bdodsgfm Rrjpfx Aa Ish Available wire diameters: 0.10 – 0.33 mm Wire EDM machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Incl. AGIEJOGGER hand box for convenient setup Incl. AGIESETUP 3D AGIEVISION control AGIE generator with eCut technologies for faster and more efficient machining Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg After receiving your order, we will clean, overhaul, and thoroughly test the machine. Subsequently, we will commission the machine at your facility. You will receive a 6-month warranty on the machine. We would be pleased to offer you the following additional services: - Control and maintenance training - Cooling unit - Programming system - Consumables - Clamping devices - Transport

Condition: good (used), Drawbar, drawbar, overrun brake -Height-adjustable drawbar -crooked -with overrun brake -Support load: 100 kg -Maximum permissible total weight: 1000 kg -Number: 12x drawbars available -Price: per piece Bsdpfsgnna Hsx Aa Iodh -Weight: 40 kg

Condition: good (used), drawbar, drawbar, overrun brake -Drawbar height adjustable -cranked -with overrun brake -Support load: 100 kg -permissible total weight: 1600 kg -Number: 14x drawbar available -Price: per piece Bsdpfx Aognnbgea Iodh -Own weight: 65 kg

Condition: excellent (used), Year of construction: 2019, Tiller head, pedestrian stacker, pedestrian pallet truck, tiller, steering, electric hand pallet truck -Manufacturer: Stier, drawbar complete with drive from electric hand pallet truck SPT-15 -Drive motor: 24 VDC / 750 W -Delivery/price: complete -Dimensions: 1350/380/H355 mm -Weight: 44 kg Bdedjizuggjpfx Aa Ijh

Condition: good (used), Year of construction: 2007, Tiller head, pedestrian stacker, pedestrian pallet truck, tiller, steering, electric hand pallet truck -Manufacturer: Jungheinrich, drawbar complete with drive from electric pallet truck ECE 118 -Drive motor: 24 VDC / 1.6 kW -Individual components: see photos -Number: 4x drawbars available -Sale/Price: per piece -Dimensions: 1530/480/H290 mm -Weight: 87 kg/unit Bjdpfx Aoiz Dr Aoa Iedh

Condition: used, fuel type: electric, Tiller head, pedestrian stacker, pedestrian pallet truck, tiller, steering, electric hand pallet truck -Manufacturer: Jungheinrich, drawbar completely from electric pallet truck / pedestrian stacker -Type: ECE or similar, unfortunately no exact type designation -Individual components: see photos -Delivery/price: complete Bdodpfxsi Dudys Aa Ieh -Dimensions: 860/370/H200 mm -Weight: 18 kg

Condition: new, Year of construction: 2023, machine/vehicle number: P7YXXX, SINC Razzoor Series cable granulator is advanced-level cable and electronic waste recycling machine, with the compact design the machine becomes mobile, it can be easy moved to other locations and works like plug and play machine. Bdsdpfshukfmjx Aa Ish The machine is equipped with all needed to work independent, just supply the electricity and you can start to recycle your cable or electro waste, for to separate the coper, metals, lead or other ferrous or nonferrous metals from the plastics.

Condition: excellent (used), Schroeder & Bauer WB 32-1 Universal wire and strip bending machine Wire feed Plain text display Press force monitoring Bdodpfx Aash I Nrqs Ioh Wire straightener Bosch wire stripper Holder and brush motor with mounted tool W32/1-32 Soundproof booth Barrel CU wire with punched parts Switch cabinet Item condition: very good Description of the manufacturer, deviations possible.  You buy the machine as it can be seen on the pictures.  Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Year of construction: 1962, condition: good (used), machine/vehicle number: 364, Max. pressure at 4.2 l/min: 550 - 570 bar Capacity approx.: 30 l Hydraulic motor: 220/380 V, 1400 rpm, 4 kW Straight-cutting machine, type GS 22 Cutting range at 140 kg tensile strength: 6 - 12 mm Ø Cutting rate approx.: 8 - 12 /min Straightening device, type RK 26 Bedpfxeb Nuugo Aa Isdh For straightening strip steel and round stock with a tensile strength of: 26 - 50 kg Weight approx.: 10 kg Space requirement: 1200 x 900 x 850 mm Total weight approx.: 130 kg

Year of construction: 2018, condition: new, loading capacity: max. 1.000 Kg. Bjdpfx Aaodx Ryye Isdh coil inside diam.: min. 400 mm coil outside diam.: max. 1.100 mm coil hight: max. 800 mm

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. Bdodpfoua Tbwsx Aa Ioh SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: excellent (used), Year of construction: 1994, Nail making machine Make: WAFIOS Type: N90 Constr. year: 1994 diameter range: 2,5-3,8 mm nail length: 50-90 mm output – pieces/min: 800 Machine includes Automatic wire paz off and wire cleaner !! Bdjdpouhxqmsfx Aa Ioh

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, GF AgieCharmilles CUT 2000X Year of construction 2018 Travels: X= 350 mm, Y= 250 mm, Z= 256 mm Travel paths U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg AGIE IPG-V generator Achievable surface quality: Ra: 0.05 µm Bedpfx Aaot I Dtne Isdh Available wire diameters: 0.05 - 0.30 mm incl. KIT 50 option Incl. automatic wire changer AWC Water bath machine with automatic wire threader With automatically lowerable container (accessible from 2 sides) Incl. AGIEJOGGER hand box for convenient set-up Incl. AGIESETUP 3D Incl. glass scales for X- and Y-axis VISION 5 control unit 15" LCD color screen, lifting keyboard and mouse Incl. Conic-Plus option for improved taper Incl. Threading Expert Dimensions (length x width x height): 2095 x 1950 x 2232 mm Net weight: 3600 kg The machine is completely overhauled and tested by us. An individual test cut is also possible. We also offer commissioning and on-site training for this machine.

Year of construction: 2019, operating hours: 4 h, condition: used, functionality: fully functional, lifting height: 50,000 mm, main lifting speed: 12,500 mm/min, i=72, KBH140 B4, absolutely new condition, 100% SWP, incl. bottom block, without DMF (can be offered) Stepless control with inverter and radio with belly console optionally available! Bodpfoq R N Tmsx Aa Iedh

Year of construction: 2026, condition: new, We also offer leasing and financing options. Feel free to contact us! For all recycling needs, we have shredders and other recycling machines in stock in Heilbronn! From copper recycling to plastic recycling, you can purchase all machines from us. Just ask! With Josan & Söhne Maschinenbau: Profitable copper processing! ‼️ We are happy to give you a live demonstration of the machines in Heilbronn! By appointment only! ‼️ Bodpfx Aeqvmpfja Isdh We are a German company based in Heilbronn, operating under German law, with warranty and service! We also speak English! We are happy to advise you on all recycling matters! Material separation in all recycling applications – just ask us. Electrostatic separator for separating plastic or synthetic materials from copper, iron, or other metals. You can also separate plastics from metals in uPVC windows, or separate plastic from sand or different types of plastics. ➡️ Motor: 6.59 kW ➡️ Dimensions (LxWxH): 4000 x 1400 x 3000 mm ➡️ Weight: approx. 1,000 kg ➡️ Throughput: 150–300 kg per hour Price on request! Subject to errors and prior sale. Pictures, prices, and specifications may differ.

Condition: used, Year of construction: 2004, Technical details: table length: 920 mm table width: 600 mm ampere: 13,2 A Bdedsuzbayspfx Aa Ioh weight of the machine ca.: 6 t dimensions of the machine ca.: 2,46 x 2,24 x 2,33 m X-axis: 600 mm y-axis: 400 mm Z-axis: 260 mm max. table load: 1500 kg The dimensions for transport are: wide 2240 mm x high 2330 mm x deep 2460 mm weight approx. 6000 kg. *

Condition: used, Year of construction: 1976, number of stapling heads 1 Bedpfxev Ach Re Aa Ijdh

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 55DM2752, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, TECHNICAL DETAILS Travel range X-axis: 600 mm Travel range Y-axis: 400 mm Travel range Z-axis: 310 mm Travel range U-axis: ±75 mm Travel range V-axis: ±75 mm Wire diameter: 0.1 - 0.3 mm Max. workpiece dimensions: 1,050 x 820 x 305 mm Max. workpiece weight: 1,500 kg Table dimensions: 840 x 560 mm Table design: U-shaped Taper angle: max. 15° Taper angle at workpiece height: max. 260 mm MACHINE DETAILS Dielectric tank Tank capacity: 860 l Filtered particle size: 3 µm Bedpfxoy I Uvcj Aa Iedh Water purifier: 10 l Dry weight: 350 kg General power supply: 13.5 kVA Air pressure: 0.5 - 0.7 MPa Air consumption: 75 l/min or more Dimensions & Weight Dimensions (W x H): 2,022 x 2,150 mm Weight: 3,500 kg

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: D12L/8327, Offer Number: D12L/8327 Machinetype: wire nail press Make: WAFIOS Type: N51 Constr. year: 1988 diameter range: 2,2-4,2 mm nail length: 13-105 mm Bdjdpfjzd U Nrsx Aa Ioh output - pieces/min: 430 Location: In our warehouse

Condition: reconditioned (used), Year of construction: 2010, operating hours: 27,000 h, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 200 mm, total length: 205 mm, total width: 202 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, empty load weight: 2,450 kg, Machine fully cleaned, inspected, and tested. Available for viewing at our premises in Semsales (Switzerland). Bdsdpfx Aaszf Akyj Ioh Wire guides, 0.25 mm. Large bobbin kit.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 0044, workpiece height (max.): 250 mm, workpiece width (max.): 750 mm, workpiece length (max.): 550 mm, feed length X-axis: 350 mm, feed length Y-axis: 250 mm, feed length Z-axis: 256 mm, The machine was manufactured in 2011, but it was not put into operation and modernized until 2016. As part of this process, an electrical update for the WorkPartner automation system was carried out! TECHNICAL DETAILS Workpiece weight max.: 200 kg Travel range X-axis: 1,800 mm Travel range Y-axis: 2,000 mm Travel range Z-axis: 1,100 mm Workpiece height max.: 250 mm Workpiece width max.: 750 mm Workpiece length max.: 550 mm Feed length X-axis: 350 mm Feed length Y-axis: 250 mm Feed length Z-axis: 256 mm MACHINE DETAILS Type of input current: Three-phase Bdodpfx Aaszf E Nxj Ieh Dimensions & Weight Dimensions (L x W x H): 3,000 x 3,760 x 2,455 mm Total weight: 3,700 kg EQUIPMENT Documentation/Manual Cooling unit Note: The operating hours of the machine can be found in the last image.

Condition: used, CNC Wire EDM Machine AccuteX AU-1000iA | Year 2007 | Large-Scale Bdedpfezt Sinox Aa Ish For sale: a professional, reliable, large-scale wire EDM machine from the renowned Taiwanese manufacturer AccuteX, model AU-1000iA. This machine is ideal for machining large and heavy parts, producing injection molds, dies, and tools with the highest precision. TECHNICAL SPECIFICATIONS: - Manufacturer: AccuteX - Model: AU-1000iA - Year of manufacture: 2007 - CNC control: Proprietary AccuteX (Windows CE) - Working travels (X × Y × Z): 1100 × 650 × 400 mm - Travels in cone axes (U × V): 150 × 150 mm - Cone cutting angle: ±21° (for height H=100 mm) - Maximum workpiece weight: up to 5000 kg (fixed table design, moving column) - Supported wire diameters: 0.15 - 0.33 mm - Machining type: Submerged KEY FEATURES AND BENEFITS: - T-Base construction: Extremely stable body made of Meehanite castings, damping vibrations and resistant to thermal and mechanical loads. - Optical (glass) linear scale system guaranteeing repeatability and positioning accuracy at the micro scale. - Original AccuteX Wire Alignment Device for wire centering/positioning (in a dedicated box with wiring). INCLUDED WITH THE MACHINE – A RICH SET OF AUXILIARY EQUIPMENT: - Professional set of EDM clamping elements: numerous clamps, clamping jaws, positioning screws, and pins. - Precision strips and base beams for quick mounting of large parts and molds on the work table. - Additional consumable accessories and wire guiding mechanism components.