Drawer cabinets

WMT 8 - 88/100 S

Condition: as good as new (ex-display), operating hours: 6 h, power: 4 kW (5.44 HP), volume flow: 0.57 m³/h, pressure (max.): 10 bar, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, RENNER industrial piston compressor with refrigeration dryer Suction capacity: 700 l/min (delivery rate: 570 l/min) Maximum pressure: 10 bar Pressure vessel: 270 l Motor output: 400V, 4.0 kW Dimensions: 970 x 795 x 1880 mm Iioded Dhwnepfx Amisb Upright design for industrial applications, robust belt guard, galvanized compressed air vessel according to AD2000 guidelines (with hand hole) with intercooler and aftercooler, anti-vibration mounts for effective vibration reduction, with refrigeration dryer, optionally with automatic condensate drain for refrigeration dryer and vessel; Various other configurations available

Condition: used, Year of construction: 1999, x-travel 600 mm y-travel 525 mm z-travel 500 mm table surface area 1000 x 543 mm spindle taper SK 40 spindle taper DIN 69871 spindle turning speed - stepless 20 - 12.000 U/min feed X/Y/Z-axis 20 - 10.000 mm/min rapid traverse X/Y/Z axis 18 / 18 / 15 m/min table load max. 350 kg control HEIDENHAIN MillPlus milling-head swivable +/- 90 ° total power requirement 26 kVA weight of the machine ca. 4,2 t Iodpfxotqqmhj Amijib dimensions of machine L x W x H 2,95 x 2,1 x 2,26 m Accessories: various tool fixtures, coolant

Condition: used, Year of construction: 1985, x-travel 485 mm y-travel 385 mm z-travel 380 mm table surface area 800 x 460 mm spindle taper SK 40 control CONTOUR 1 spindle turning speed range 50 - 2500 U/min feeds 10 - 1000 mm/min rapid traverse 2 m/min table load capacity 600 kg quill stroke 80 mm total power requirement 7,5 kW Ijdpfstqqllsx Amioib weight of the machine ca. 2,0 t dimensions 2,4 x 1,7 x 1,98 m Acc.: vertical head with hydr. tool clamping and quill retraction, solid table, coolant - movement of X/Y/Z also possible via handwheels -

Condition: like new (used), functionality: fully functional, For sale is an M18 Milwaukee demonstration set with full warranty. The Power SET consists of: Cordless percussion drill driver M18 FPD3-0X Cordless compact impact wrench 1/2" M18 FIW2F12-0X Cordless angle grinder M18 FSAG125X-0X Cordless circular saw M18 FCS552-0 Iiedpfx Amswzlwkeiob Cordless reciprocating saw M18 FSZ-0 LED cordless hand lamp M18 TLED-0

Condition: used, axle configuration: 2 axles, first registration: 02/2011, total length: 5,790 mm, total width: 2,550 mm, suspension: steel-air, tire size: 315/70R22.5, wheelbase: 3,550 mm, color: brown, Year of construction: 2011, Equipment: ABS, = Further options and accessories = - Anti-slip regulation (ASR) - Roof spoiler - Electric windows - Refrigerator - Sun visor - Cruise control = Notes = Scania P280 First registration: 25-02-2011. In combination with: TRAVEL SUPREME INC First registration: 10-11-2006. Max weight: 9,000 kg. Iodpfx Ajwahwdomisib Trailer is used as a mobile training room. 2 x slide-outs. Toilet. Kitchen. Stove. Ovens. Fridge. Heater. = Further information = Tyre size: 315/70R22.5 Brakes: Disc brakes Front axle: Steering; Tyre tread left: 75%; Tyre tread right: 75%; Suspension: Leaf spring Rear axle: Twin tyres; Tyre tread left inside: 80%; Tyre tread left outside: 80%; Tyre tread right inside: 80%; Tyre tread right outside: 80%; Suspension: Air suspension Unladen weight: 7,470 kg Payload: 1,530 kg Gross vehicle weight: 9,000 kg Type designation: P 280 + trailer - 2 x slide-out = Company information = ALL PRICES ARE NET FOR EXPORT. (Joris Versteijnen NL-DE-GB) (Wouter Greutink NL-DE-GB-ES-IT) We also speak Russian. We strive to provide correct information, but no rights can be derived from the texts provided.

Condition: used, Year of construction: 1982, spindle diameter 90 mm x-travel 900 mm y-travel 900 mm z-axis 1200 mm w-axis 800 mm table surface area 900 x 1200 mm rotation movement 360 Grad table load 6,0 t turning speeds 25 - 1400 U/min spindle taper ISO 40 voltage 380 V / 50 Hz drive milling spindle 9,2 kW total power requirement 35 KVA weight of the machine ca. 10 t dimensions of the machine ca. 4,5 x 2,8 x 2,5 m • Machine had been completely refurbished in 1994 by the manufacturer Iisdotv H Ucjpfx Amijb • new switch cabinet, • new Servo-drive BOSCH and HEIDENHAIN-control TNC 360,(3D control) • valve plate Ø 600 mm. • traverse distance: 150 mm The machine is currently not ready for demonstration due to a fault in the electrical system.

Condition: used, Year of construction: 1998, Technical details: turning diameter over bed: 600 mm turning diameter over support: 400 mm turning length: 2000 mm center height over support: 300 mm centre distance: 1600 mm revolution per minute: 3 - 2.500 U/min tailstock taper MT: MK 5 spindle bore of work spindle: 62 mm quill stroke: 190 mm longitudinal feeds:: ca.0,001-10 einstellbar mm/U cross feed: ca. 0,001-5 einstellbar mm/U Iodpfxsw Rkt Io Amisib Rapid feed X axis: bis zu 5000 m/min. total power requirement: 40 KVA weight of the machine ca.: 5,6 t dimension machine xH: 4,0 x 2,0 x 1,9 m incl. accessories see picture *

Condition: used, The NOWICKI MP-300 professional container washer is a device designed for intensive use in food, meat, fish, and dairy processing plants. Thanks to its robust construction and high capacity of up to 300 containers per hour, the machine is ideal for use wherever hygiene and efficiency are key. Technical specifications: Model: MP-300 Manufacturer: Metalbud NOWICKI Power supply: electric Capacity: up to 300 containers/hour Dimensions: 370 cm (length) × 150 cm (width) × 190 cm (height) The device has been designed for easy cleaning and quick servicing. It guarantees a long service life and reliable operation even under intensive use. Advantages of the NOWICKI MP-300 washer: High efficiency Energy-efficient operation thanks to modern components Easy access to internal components for easy cleaning Isdow Rdktjpfx Amijib Compact design, adapted to production lines

Condition: excellent (used), Year of construction: 2016, Machining center Ijdpfx Aetiauhemisib Make KNUTH Type EcoMill 350 CNC

Year of construction: 2026, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system type TR450 The spray rotary cleaning system type TR450 is an automatic cleaning and degreasing system with a cover that can be easily opened upwards. The system is designed for cleaning individual parts and/or bulk goods in baskets measuring LxWxH 520x320x200h mm. The basket must be closed with a lid for the cleaning process. The cleaning result depends on the fact that the parts can be easily circulated in the basket in the case of bulk goods. The fill level in the basket must be observed for this. The system is also equipped with a flood tray under the basket, which enables the parts to be scooped up in a flood, thus achieving an even better cleaning result. including the following equipment: - Completely made of stainless steel 1.4301 inside and out - Level monitoring and automatic fresh water refill - Insulation of the entire system - Hot air drying (output: 11.6 kW) - Steam vapor extraction - Oil skimmer for bath maintenance - Automatic fresh water refill Iodpfx Aofbt Sijmioib - 1 small parts basket 520x320x200h mm, mesh size: 6x6 mm, incl. height-adjustable lid Connected load: approx. 20 kW (32 amp plug)