Used Copper Granules for sale (1,127)

Condition: excellent (used), Year of construction: 1997, power: 1.5 kW (2.04 HP), Tria plastic grinder, shredder, granulator for sale in excellent condition make: TRIA 20-15/BL-T Ksdpfxera N A Ne Adtswt Power: 1.5kW, 50Hz, 380V Year of manufacture: 1997 Inlet opening: 200 x 230mm rotating knives 3 pcs standing knife: 1 pc Spout opening: 60mm Final product size: 3-5mm Capacity: 30 kg/h approx.

Condition: excellent (used), functionality: fully functional, Heavy-duty cutting mills Manufacturer: Herbold AMIS Type: SM 60/100 7-2 Inlet opening 700 x 1000 mm Open rotor 600 mm diameter x 980 mm wide Rotor blades: 7 Stator blades: 2 plus blade set: 2 Blade setting table Kwedpfx Ajufi Rxjdtet

Condition: good (used), Year of construction: 2007, functionality: fully functional, Granulator, separator for copper or aluminum cables. Feed rate: 9 m/min Capacity: 150 kg/h of granulated cable. Granules approx. 3 mm and a copper content range of 50%. 15 kW 400 V 50 Hz Ksdpjxxirwofx Adtjwt INSTRUCTION AND MAINTENANCE MANUAL AVAILABLE

Condition: good (used), Wexiödisk WD-100GR pellet washer Kwjdof Hp Tpspfx Adtet The WD-100GR is a granule pot washing machine that can wash with or without granules. The HACCP function in the machine's control program ensures compliance with hygiene requirements. The machine is a continuous model for simplified logistics and improved ergonomics and hygiene. It is also equipped with an efficient spinning wheel technology. Steam reduction as standard Save energy and drying time with the ECO-FLOW condensing unit No pre-washing or scrubbing by hand thanks to powerful washing with water and granules Great hygiene and fast drying with spin cycles Heat recovery and a condensation battery reduce the steam in the room Complete dishwashing system with loading table and trolley Easy maintenance - can be performed from the front or the side Effective dishwashing and high capacity with double rinse system You can find more dishwashers in our store International shipping on request!

Condition: excellent (used), Year of construction: 1999, GLATT GPCG 120 Fluidbed Dryer/Spray Granulator This universally applicable plant is designed for drying, moistening and spray granulation with batch sizes up to 420 liters. Discharging is done by means of a Glatt EL 300 lifting and discharging device with Glatt GS screening machine. Kwsdpfx Adjvdrcastet Accessories: Mobile weighing Mettler Toledo and WIP plant. Manufacturer: Glatt Year of construction: 1999

Year of construction: 1984, condition: good (used), This mixer was designed for intensive mixing and wet granulation of materials such as powder / granulate. Working volume: 540 liters Total volume: 600 liters Cutter head: 4.5 / 5.8 kW, speed 1,500 / 3,000 min¹ Mixing tool: 32 / 47 kW, speed 2 speeds Manufacturer: Lödige Year of construction: 1984 Floor Space: Mischer: 280 x 125 x 265 cm, Schaltschrank: 120 x 35 x 150 cm Ksdpfx Ajwbhn Sodtowt

Condition: good (used), Year of construction: 1974, This mixer was designed for intensive mixing and wet granulation of materials such as powder / granulate. Working volume: 63 - 200 liters Kwsdowa Tcfjpfx Adtet Total volume: 250 liters Cutter head: 4.9 / 6 kW, speed 1,500 / 3,000 min¹ Mixing tool: 18,5 kW, speed 2 speeds Manufacturer: Lödige Year of construction: 1974 Floor Space: 200 x 110 x 145 cm

Condition: used, Granulate Dryer, Granulate Drying Unit, Hot Air Dryer, Used Machine Manufacturer: MOTAN - Model: MDC400; Serial No.: 1753 (Year: 1999) - Airflow: 400 m³/h Kodpfx Adexv R T Djtowt - Heating Capacity: 21 kW - Electrical Data: 400 V; 22.5 kW; 34.5 A

Condition: good (used), 1-shaft granulator shredder - brand LANCELIN L600 - 22 kw - shredding chamber 650 x 700 - throughput up to 1 ton/hour - 5 mobile knives/2 fixed blades mounted in bevels (scissor effect) - solid rotor - 12mm grid (other diameters possible) - 1 set of knives in reserve - loading possibility - delivered with its belt or/and vacuum cleaner and outlet cyclone and a deferrer (permanent magnet) . very reliable, very solid, no brittleness, ... very versatile and powerful, can shred cables for copper, purges, plaster, BA13, D3E, plastics, wood, bumpers, bottles, metals, etc. possibility of pre-shredding to 50mm with a pre-shredder or rotary shredder. Also for sale. price for lot . Kwsdpfovitnujx Adtjt

Condition: good (used), functionality: fully functional, complete line for shredding and sorting electrical cables to recover copper. 3 shredding units with 1 Mocco or San Andrea pre-shredder, 1 Lancelin blade shredder 14mm grate power 22kw, 1 Dreher GS4562 shredder 8mm grate power 37kw, a 5mm mesh screen, a magnetic pulley shredder and a dry densimetric table. processing and sorting capacity: 1 ton/hour. current settings for 8mm material. usable for other materials to be shredded (plastics, glass, DIS, wood, ....). Kwsdjtu Nq Tjpfx Adtjt

Condition: reconditioned (used), We manufacture the original We offer you a used, workshop overhauled Kodeh S U Ryspfx Adtowt pelletizer GA75 / 9 for sale. - Engine power either 55 kw or 75 kw - 9 rotor knife rows, 4 stator knives - new rotor with completely new bearings and new hardened wear parts . Inquiries please only from tradesmen!

Condition: used, machine/vehicle number: 11627, Rotor diameter: 220 mm Rotor width: 160 mm Kodpfx Aswbwuusdtewt Rotor blades: 3 Stator knife: 2 Inlet cross-section approx. 400x400 mm Drive motor: 6.5 kW

Condition: used, machine/vehicle number: 12659, Rotor diameter: 300 mm Kwodpek Tuxlofx Adtjt Rotor width: 500 mm 3-knife rotor 2 rows stator knives Inlet cross section approx. 500 x 490 mm Drive motor: 22 kW

Year of construction: 2004, condition: good (used), Granulator Rapid 3560 KUB – incl. cyclone, piping, spare blade sets and conveyor Year: 2004 Condition: In daily operation – test run available Kodpfx Asx Eld Sjdtjwt For sale a well-maintained Rapid 3560 KUB granulator complete with cyclone system, piping, conveyor and spare knife sets. The machine is in continuous production and can be demonstrated on request. Included in the package: Cyclone Piping Conveyor Spare blade sets Fully operational system – ready for use Additional information: Year of manufacture: 2004 Test run possible before purchase Sold in good working condition

Condition: new, Year of construction: 2024, The Hight Speed Mixer SPT-SHM series are used to mix dry powder for tablets and capsules and can be also used for wet granulation (pre-stage to tablet and capsule powder). All product touching parts are made out of SS 316L steel. Others are out of SS 304. The machines are conform to GMP standards and CE certificated. The output of the machine depends on the product. Kwsdpfxoh Im D Ts Adtjt

Year of construction: 2023, condition: new, Josan PVC Mill 500 We also offer leasing and financing options. Feel free to ask us! ‼️ Net price only €18,999 ‼️ With our complete system, as shown in the picture, you can finely mill your plastics and feed them directly into the recycling process. Of course, we also have pre-shredders, crushers, and all other types of plastic recycling machines available. Whether you are a large company, medium-sized business, or small enterprise, with our expertise we can cater to your individual needs in the recycling sector with our machines! We have machines in stock in Heilbronn for live demonstrations! From copper granulation plants, shredders, and electrostatic separators (for example, to separate sand from plastic, copper from plastic, different types of plastics, etc.), so you can directly reuse clean material. Just ask us. We manufacture the appropriate system tailored to your needs. Unfortunately, our English is not perfect. You’re also welcome to speak to us in Swabian! Josan PVC Mill 500: ▶️ Throughput approx. 200 kg/h ▶️ Power 37 kW ▶️ 24 rotating and 13 fixed blades made from the hardest special steel alloy ▶️ All-inclusive as shown in picture ▶️ Weight approx. 1,200 kg Net price: €18,999.00 Kwjdpoqvmn Nofx Adtst +19% VAT: €3,609.81 Gross price: €22,608.81 Subject to errors. Pictures/description may vary.

Year of construction: 2024, condition: new, We also offer leasing and financing options. Feel free to contact us! For all recycling needs, we have shredders and other recycling machines in stock in Heilbronn! From copper recycling to plastic recycling, you can purchase all machines from us. Just ask! With Josan & Söhne Maschinenbau: Profitable copper processing! ‼️ We are happy to give you a live demonstration of the machines in Heilbronn! By appointment only! ‼️ We are a German company based in Heilbronn, operating under German law, with warranty and service! We also speak English! We are happy to advise you on all recycling matters! Material separation in all recycling applications – just ask us. Electrostatic separator for separating plastic or synthetic materials from copper, iron, or other metals. You can also separate plastics from metals in uPVC windows, or separate plastic from sand or different types of plastics. ➡️ Motor: 6.59 kW ➡️ Dimensions (LxWxH): 4000 x 1400 x 3000 mm ➡️ Weight: approx. 1,000 kg Kwjdpfxjqvmpfo Adtst ➡️ Throughput: 150–300 kg per hour Price on request! Subject to errors and prior sale. Pictures, prices, and specifications may differ.

Year of construction: 2025, condition: new, APPLICATIONS The S-Series granulators are mainly used as large central granulators for In-house recycling applications for processing large thick-walled parts in one stage or as a second-stage granulator after a shredder to achieve higher results or throughput rates GENERAL DESCRIPTION The high-performance S-Series granulators offer widths from 600 to 1000 mm with diameters of 400 and 560 mm. The all-welded heavy steel construction is designed to withstand the most demanding and universal applications. Rotor bearings, blades brackets and rotor shaft are oversized. The standard V-cut ensures a high quality grind with a very low percentage of fines in the starting material. The removable third stator blade (optional) acts as a deflection wedge and allows the machine to be quickly adapted to different application scenarios. Other standard equipment also includes easily adjustable blades from the outside, reducing the risk of contamination. S-SERIES - HIGH PERFORMANCE GRANULATORS ADVANTAGES: "The easily removable deflector wedge acts as a third stator blade and can be used to adjust the aggressiveness of the rotor at the first cut point. The V-Cut technology produces a high quality regrind, with simultaneous reducing energy consumption and noise. The high performance bearings are separated from the cutting chamber to prevent lubricant ingress and bearing failure to prevent material contamination. "Both rotor and stator knives are externally adjusted. Rotor diameter (mm) 560 Rotor width (mm) 700 Drive capacity (HP) 75 Rotor knives (pieces) 5 x 2 Kwsdpfx Adjp N D Sbjtet Stator knives (rows) 2 + 1 Hopper opening (mm) 700 x 650 Total length (mm) 2300 Length machine (mm) 2200 Width total (mm) 1600 Width machine (mm) 1060 Height (mm) 3509

Year of construction: 2025, condition: new, GSL - Slow speed granulator GSL 300 Rotor diameter (mm) 300 Rotor width (mm) 600 Rotor speed (rpm) 150 Drive capacity (kW) 11 Rotor knives (pcs) 48 Stator blades (rows) 2 Screen size (mm) > 6 Weight approx. (kg) 950 Kwsdei Hpf Nopfx Adtjt The slow speed granulators in the GSL range are mainly used in injection and blow molding processes as beside the press machines to grind runners and sprues. The machines can be used for rejected products in the inline recycling process as well. Different hopper and base frame designs make it possible to integrate the machine with most types of injection molding machines and robots. Driven by gear motor Unique knife design eliminates adjustment after resharpening. Simple tool less access for maintenance and cleaning Customizable hopper and base frame The slow speed granulators in the GSL 300 range feature a staggered 300 mm diameter rotor with widths ranging from 400 to 800 mm. The rotor is directly driven by a geared motor. The low rotor speed reduces the noise level of the machine and creates less dust while grinding. The special design knives of the GSL series can be sharpened easily and do not need adjustment afterwards. The material is fed via a sound absorbing feed hopper that can be tailored to fit various applications and feeding ways. Depending on the requirements the machines can be fitted with a wide variety of hoppers, they are mounted on either low or high level base frames with matching suction bins or bag filling adapters. Quick snap fasteners and hand screws make access to the machine for cleaning and maintenance fast and easy. Applications The GSL slow speed granulators of the 300 series are mainly used in injection and blow molding processes as beside the press machines to grind runners and sprues. But they can be used as low noise central granulators for small throughput requirements as well. The stronger design of the 300 series GSLs allow them to be used for stronger and thicker materials while offering the same advantages regarding low noise and dust as the smaller GSL machines. All GSL models can be equipped with a built in blower system in case a vacuum loading system is not available, or to transport the ground material to bags for storage.

Year of construction: 2025, condition: new, Direct driven staggered rotor Special knife design makes adjustment unnecessary Easy access for maintenance and cleaning Slow rotor speed creates less noise and dust Easily customizable to suit different applications Rotor diameter (mm) 300 Rotor width (mm) 800 Rotor speed (rpm) 150 Kedjn Hqv Depfx Adtjwt Drive capacity (kW) 18.5 Rotor knives (pcs) 66 Stator blades (rows) 2 Screen size (mm) > 6 Weight approx. (kg) 1100

Year of construction: 2025, condition: new, Size reduction of large-volume blow molded parts as well as start and end pieces In a compact redesign, the best features of the proven GST and GSC series have been integrated, with special emphasis on weight, handling and energy efficiency. These compact granulators are equipped with complete sound insulation, resulting in extremely quiet operation. The granulators are available with 250 mm rotor diameters and widths from 300, 450 to 600 mm. The curved rear wall of the cutting chamber ensures aggressive material intake and prevents material jams. As with all ZERMA granulators, the rotor and stator knives are adjustable outside the machine, reducing downtime for maintenance. The highly tangential, curved rear wall of the cutting chamber, combined with the aggressive open rotor design, ensures reliable material pickup and minimizes the risk of jams. The compact granulators are suitable for use in blow molding operations. They are suitable for recycling e.g. voluminous parts such as bottles, canisters, crates. Due to the low feeding height, the machines can be easily fed with material by hand or by a small conveyor belt. The low noise emission and the small footprint make the granulator a perfect solution for inline size reduction Optional rear panel with higher stator knife M version: The feed method with a higher positioned stator knife is better suited for thicker walled and more compact parts, such as injection molded parts, profiles, plates, etc. Due to the cutting geometry and the lower aggressiveness of the rotor, a high quality regrind is obtained regardless of the material type or shape, such as injection molded parts, profiles, plates, etc. Control system and control panel: The integrated control system and control panel not only comply with all applicable safety regulations, but can also be customized to meet specific requirements. In addition, peripheral equipment such as infeed conveyors, metal detection and unloading systems can be seamlessly integrated into the machine's control system. For improved efficiency, an optional intelligent energy saving function is also available that reduces power consumption during idle periods and can automatically start and stop the system based on the status of upstream machines. Standard configuration with blower, power consumption 0.75 kW and 400 er cyclone Rotor diameter (mm) 250 Rotor width (mm) 600 Drive (kW) 11 Number of rotor blades 3 x 2 Number of stator knives 2 Screen perforation (mm) > 6 Weight approx. (kg) 1450 Feed opening (mm) 380 x 600 Feed opening option of M version (mm) 295 x 600 Kodpfx Adep Sr Iajtowt

Year of construction: 2025, operating hours: 1 h, condition: new, functionality: fully functional, Optimization of an established concept. Shredding of large-volume blow-molded parts as well as start and end pieces The best features of the proven GST and GSC series have been integrated into a compact redesign, with particular emphasis on weight, handling and energy efficiency. These compact granulators are equipped with complete sound insulation, resulting in extremely quiet operation. The granulators are available with 250 mm rotor diameters and widths of 300, 450 to 600 mm. The curved rear wall of the cutting chamber ensures aggressive material feed and prevents material jams. As with all ZERMA granulators, the rotor and stator knives can be adjusted outside the machine to reduce maintenance downtime. 98T8Mrx The highly tangential, curved rear wall of the cutting chamber combined with the aggressive open rotor design ensures reliable material intake and minimizes the risk of blockages. The compact granulators are suitable for use in blow molding operations. They are suitable for recycling voluminous parts such as bottles, canisters and crates. Due to the low feed height, the machines can be easily fed with material by hand or a small conveyor belt. The low noise emission and small footprint make the granulator the perfect solution for inline shredding Optional rear wall with higher stator knife M version: The feed method with a higher stator blade is better suited for thicker-walled and more compact parts, such as injection-molded parts, profiles, sheets, etc. Due to the cutting geometry and the lower aggressiveness of the rotor, a high-quality regrind is achieved regardless of the material type or shape, e.g. injection molded parts, profiles, plates, etc. Control system and control cabinet: The integrated control and control panel not only complies with all applicable safety regulations, but can also be adapted to specific requirements. In addition, peripheral equipment such as feed conveyors, metal detection and unloading systems can be seamlessly integrated into the machine's control system. For improved efficiency, an optional intelligent energy saving function is also available, which reduces power consumption during idle times and can automatically start and stop the system based on the status of upstream machines. Standard configuration with blower, power consumption 0.75 kW and 400 cyclone Rotor diameter (mm) 250 Kjdjum Rnvspfx Adtjwt Rotor width (mm) 450 Drive (kW) 7.5 Number of rotor blades 3 x 2 Number of stator knives 2 Screen perforation (mm) > 6 Weight approx. (kg) 700 Feed opening (mm) 380 x 450 Opening feed option of the M version (mm) 295 x 450

Year of construction: 2025, condition: new, APPLICATIONS The S-Series granulators are mainly used as large central granulators for In-house recycling applications for processing large thick-walled parts in one stage or as a second-stage granulator after a shredder to achieve higher results or throughput rates GENERAL DESCRIPTION The high-performance S-Series granulators offer widths from 600 to 1000 mm with diameters of 400 and 560 mm. The all-welded heavy steel construction is designed to withstand the most demanding and universal applications. Rotor bearings, blades Kodpfx Aop N D Tyedtswt brackets and rotor shaft are oversized. The standard V-cut ensures a high quality grind with a very low percentage of fines in the starting material. The removable third stator blade (optional) acts as a deflection wedge and allows the machine to be quickly adapted to different application scenarios. Other standard equipment also includes easily adjustable blades from the outside, reducing the risk of contamination. S-SERIES - HIGH PERFORMANCE GRANULATORS ADVANTAGES: "The easily removable deflector wedge acts as a third stator blade and can be used to adjust the aggressiveness of the rotor at the first cut point. The V-Cut technology produces a high quality regrind, with simultaneous reducing energy consumption and noise. The high performance bearings are separated from the cutting chamber to prevent lubricant ingress and bearing failure to prevent material contamination. "Both rotor and stator knives are externally adjusted. Rotor diameter (mm) 560 Rotor width (mm) 1000 Drive capacity (HP) 100 Rotor knives (pieces) 5 x 2 stator knives (rows) 2 + 1 Hopper opening (mm) 1000 x 650 Total length (mm) 2310 Length machine (mm) 2200 Width total (mm) 1800 Width machine (mm) 1330 Height (mm) 3770

Year of construction: 2025, condition: new, Size reduction of large-volume blow molded parts as well as start and end pieces In a compact redesign, the best features of the proven GST and GSC series have been integrated, with special emphasis on weight, handling and energy efficiency. These compact granulators are equipped with complete sound insulation, resulting in extremely quiet operation. The granulators are available with 250 mm rotor diameters and widths from 300, 450 to 600 mm. The curved rear wall of the cutting chamber ensures aggressive material intake and prevents material jams. As with all ZERMA granulators, the rotor and stator knives are adjustable outside the machine, reducing downtime for maintenance. The highly tangential, curved rear wall of the cutting chamber, combined with the aggressive open rotor design, ensures reliable material pickup and minimizes the risk of jams. The compact granulators are suitable for use in blow molding operations. They are suitable for recycling e.g. voluminous parts such as bottles, canisters, crates. Due to the low feeding height, the machines can be easily fed with material by hand or by a small conveyor belt. The low noise emission and the small footprint make the granulator a perfect solution for inline size reduction Optional rear panel with higher stator knife M version: The feed method with a higher positioned stator knife is better suited for thicker walled and more compact parts, such as injection molded parts, profiles, plates, etc. Due to the cutting geometry and the lower aggressiveness of the rotor, a high quality regrind is obtained regardless of the material type or shape, such as injection molded parts, profiles, plates, etc. Control system and control panel: The integrated control system and control panel not only comply with all applicable safety regulations, but can also be customized to meet specific requirements. In addition, peripheral equipment such as infeed conveyors, metal detection and unloading systems can be seamlessly integrated into the machine's control system. For improved efficiency, an optional intelligent energy saving function is also available that reduces power consumption during idle periods and can automatically start and stop the system based on the status of upstream machines. Standard configuration with blower, power consumption 0.75 kW and 400 er cyclone Rotor diameter (mm) 250 Kwsdpfjp Sr Anex Adtet Rotor width (mm) 300 Drive (kW) 7.5 Number of rotor blades 3 x 1 Number of stator knives 2 Screen perforation (mm) > 6 Weight approx. (kg) 950 Feed opening (mm) 380 x 300 Feed opening option of M version (mm) 295 x 300

Condition: good (used), Mouth width: 150x80mm Kwodpfx Adjfhnv Ijtot 2 rotor blades (95mm)