Used Cooling for sale (7,706)

Condition: used, New: No Model year: 2019 Color: White Knodszhghbspfx Akleb Part suitable for: trucks Overall condition: good Technical condition: good Visual condition: good

Condition: used, Manufacturer: CFS Model: BR6000/600 Year: 2001 Condition: Used Serial Number: 1402 Stock Number: 3426B Belt width: 600 mm Belt: Eyelink belt for extra small products Frying length: 6000 mm Heating: Thermal oil Power: 3 x 400V, 50Hz, 8.6kW Dimensions: 8700 x 2200 x 3800 mm Weight: 4250 kg CFS oil filter Type: OMR120 Serial number: 60 Year of construction: 2005 Knjdpszw Dzwofx Aklsb Dimensions: 2750 x 1100 x 1700 mm Power: 3 x 380V, 50Hz, 4.5kW Weight: 525 kg Including pallet filterpaper NN ambient cooling conveyor Belt width: 950 mm Belt length: 6000 mm Belt: eye link belt of 3 mm Compressed air: 6 Bar Power: 3 x 380V, 50Hz, 2.7kW Dimensions: 7600 x 1700 x 2000 mm Variable speed control Wanson Themopac thermic boiler Type: 200B Serial number: 9335.56445 Year of construction: 1986 Heating: natural gas Heating power: 233 kW Power: 3 x 380V, 50Hz, 7.5kW Dimensions: 3000 x 2450 x 2600 mm Installation built into 10ft container

Condition: good (used), There is 5 smokehouse ,cooking and intensive cooling unit. Knsdpfjz Atnkox Akljb

Year of construction: 2016, condition: used, Cooling unit Frigo Carrier Supra 1250Mt Year of manufacture: 2016 Complete with condensers and 8-meter cooling unit. Cevoman bv. Lenskensdijk 5 2200 Herentals Kedpfszl Tqqox Aklonb Belgium

Condition: ready for operation (used), functionality: fully functional, power: 23 kW (31.27 HP), input frequency: 50 Hz, overall weight: 2,850 kg, The Revent VC70A is a vacuum cooler specifically designed for bakery products, enabling very rapid cooling of bread and other products immediately after baking. Unlike traditional cooling on a trolley at ambient temperature or in a cold room, the VC70A creates a controlled vacuum inside the chamber. As the pressure decreases, a small portion of the moisture contained in the product evaporates at a low temperature. This evaporation rapidly removes the heat present in the core of the product, allowing for fast and uniform cooling. This technology therefore significantly reduces the time between the product exiting the oven and the subsequent production steps: slicing, packaging, freezing, or shipping. Revent also states that the process reduces the overall baking/cooling time while improving or preserving the volume, crumb structure, crust, and aromas of the product. It is suitable for both fully baked and pre-baked products. Key advantages: - Extremely rapid cooling of products after baking - Significant reduction in cooling time compared to traditional cooling - Possibility of reducing the time spent in the oven for certain products, as residual baking continues during the vacuum phase - Increased oven production capacity - Reduction in the number of trolleys and the space required for cooling - Uniform cooling to the core of the product - Better control before slicing or packaging - Preservation of the volume and structure of the bread - Improved quality of the crust and crumb - Reduced losses and rejected products - Suitable for industrial and semi-industrial production. Technical specifications – Revent VC70A Manufacturer: Revent International AB Model: VC70A Type: Vacuum Cooling System Maximum load: 70 kg per cycle Capacity: 1 trolley Maximum usable space: 820 × 1000 mm Configuration: 1 front door Vacuum pump: 22 kW Power supply: 400 V / 50 Hz / three-phase Rated current: 52 A For some products, the cooling time can be reduced to just a few minutes instead of several tens of minutes with a conventional method. The exact duration naturally depends on the product, its weight, its baking process, and the desired final temperature. In summary: The Revent VC70A is neither an oven nor a conventional cooling chamber. It is a process equipment that rapidly removes heat from the product using a vacuum. Kjdpfxozy Nv Ss Aklonb It is particularly interesting for industrial bakeries looking to increase oven throughput, shorten the production cycle, and package or process products much more quickly after baking. Machine available for inspection.

Condition: used, mileage: 820,000 km, power: 355 kW (482.67 HP), first registration: 01/2018, fuel type: diesel, overall weight: 20,500 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), Additional information: * Payload: 11987 kg * Height: 3950 mm * Width: 2550 mm * Length: 6160 mm * Type | Front axle: Goodyear R * Tire size | Front axle: 385/65 R22.5 * Tire tread depth inner left | Front axle: 40% * Tire tread depth inner right | Front axle: 40% * Maximum axle load | Front axle: 8000 kg * Type | Rear axle: Bridgestone R * Tire size | Rear axle: 315/70 R22.5 * Tire tread depth outer left | Rear axle: 20% * Tire tread depth inner left | Rear axle: 20% * Tire tread depth outer right | Rear axle: 20% * Tire tread depth inner right | Rear axle: 20% * Maximum axle load | Rear axle: 11500 kg * Wheelbase: 380 cm * Cabin: Yes * Position | Front axle: Front * Brand | Front axle: Other * Brake type | Front axle: Disc brakes * Suspension | Front axle: Parabolic springs * Steering | Front axle: Yes * Position | Rear axle: Rear * Brand | Rear axle: Other * Brake type | Rear axle: Disc brakes * Suspension | Rear axle: Air suspension * Reduction | Rear axle: Single reduction * Twin tires | Rear axle: Yes * Driven | Rear axle: Yes * Differential lock | Rear axle: Yes Additional features: * Aluminum fuel tank * Anti-lock braking system (ABS) * Anti-slip control * DAB radio * Roof spoiler * Differential lock * Double fuel tank * Electric windows * Electronic Braking System (EBS) * ESP * Cruise control * Website * Cabin * Air conditioning * Refrigerator * Air-suspended seats * Air horns * Fog lights * Radio/CD player * Disc brakes * SemCollection * Side skirts * Spoiler * Auxiliary heater Kedpfoy Rwyiex Aklonb * Central locking Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inform yourself in advance about the costs and procedures in your respective country Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale and errors.

Condition: used, Machine: Cooling unit Ksdpfoz Ar Upox Aklenb

Condition: used, Year of construction: 2018, Manufacturer: ONI, Year of manufacture: 2018, Serial no. 181626, Container dimensions: 8,000 x 3,000 x 3,000 mm, 3 pumps, Manufacturer: KSB, Type: ETB (heat recovery/hydraulic cooling/free cooling), Free cooler 500 kW (roof-mounted), 10 fans with adiabatic cooling, L/W/H 9,930 x 2,290 x 1,510 mm, Water treatment system with plastic tank 2 x 3,000 liters, Water softener, 7 heat recovery units, Type SW25, Heating capacity 25 kW, Air volume flow 6,000 m³/h, 4 with door air curtain nozzles, 2 air heaters, Type SW1 (office area), Pump and valve group for heat recovery circuit, Heating element, 200 W, System control: Siemens Simatic S7, Touch panel HMI +++ Attention: This system is part of an online auction! +++ Knodpfezn Atasx Akleb

Condition: like new (used), Year of construction: 2021, operating hours: 180 h, functionality: fully functional, cooling capacity: 29 kW (39.43 HP), type of input current: three-phase, type of cooling: air, ambient temperature (max.): 45 °C, ambient temperature (min.): 5 °C, input voltage: 400 V, pressure: 3 bar, temperature: 10 °C, volume flow: 4.5 m³/h, total width: 830 mm, total length: 1,240 mm, total height: 2,030 mm, noise level: 62 dB, empty load weight: 540 kg, input frequency: 50 Hz, Equipment: compressor, cooling unit, KKT cBoxX40 chiller, year of manufacture 2021, air-cooled cooling unit for frost-free indoor installation. Cooling capacity 29 kW (at water supply temperature 10 °C, ambient temperature 35 °C). Refrigerant R410A, compressor with energy-efficient scroll technology. Condenser in a compact design with high fin efficiency and low refrigerant charge. Speed-controlled fan with EC-Blue technology according to ErP 2015, corrosion-resistant Owlet blades. Electronic expansion valve with high control accuracy. Evaporator as a plate heat exchanger in an asymmetrical design. Water circuit: customer-specific piping with external connections, insulated stainless steel tank (1.4301) in an atmospherically open design, electronic level monitoring incl. low water/dry-run protection, temperature and pressure display in refrigerant supply and return, flow control for evaporator protection, multi-stage centrifugal pump. Control cabinet: design according to DIN EN 60204 Part 1 and VDE 0113 Part 1, controller with plain text display (multilingual, including German, English, French), main switch, motor protection switch, transformer for 24 V DC control circuit, status display, protection class IP54, collective fault/warning message with potential-free contact, potential-free remote control, short-cycling protection, limit value monitoring min./max. Technical data: flow rate 4.5 m³/h, free pump pressure 3.0 bar, air flow rate 9,350 m³/h, sound pressure level 62 dB(A), permissible ambient temperature +5 to +45 °C, tank volume 300 l, water connection Rp 1 1/2", operating voltage 400/3/50, dimensions (H×W×L) 2,030×830×1,240 mm, net weight 540 kg. Ksdpfx Aszzvgaoklonb Additionally included: insulation of the refrigerant lines and the pump inside the housing, overpressure valve for standby operation, level kit (supplied loose) for height differences >500 mm between chiller and consumer, leveling feet (supplied loose) for vibration decoupling and height compensation up to 5° floor slope. Complies with the Ecodesign Directive (EU) 2015/1095 and (EU) 2016/2281. Condition, history and handling: year of manufacture 2021, ordered 07/2021, delivery week 38/2021. The unit was operated in conjunction with a Sollich temperature control system, the production use of which amounted to approximately 180 operating hours; an operating hour counter is not available. Stored in Wuppertal since the end of 2024, inspection by appointment. Purchase value in 2021 according to offer: 9,800 € net. Sale from commercial to commercial, excluding warranty, technical data according to manufacturer's documents, errors and omissions excepted. This cooling unit is also available as part of a complete temperature control and mixing system (including Turbo temperature controller TE 1600 D and nut mixing unit NM 200 VA), see advertisement ID A22725782.

Condition: used, Universal temperature control unit WEINREICH, Type WTD 4 Temperature control unit with electric heating and connections for external cooling Manufacturer's serial number: 11932217, Year of manufacture: 1993 Temperature: max. 140°C Operating overpressure: max. 6 bar Pump capacity: 30 l/min Tank volume: 4 liters Kjdpfx Asg Rhx Usklonb Heating capacity: 4 kW Cooling capacity (heat exchanger): 15 kW Pump motor power: 0.37 kW Circulating water, supply + return: G 3/8" Cooling water, supply + return: G 3/8" Total power: 4.4 kW Mains connection: 380 volts, 50 Hz, CEE plug - Temperature control medium: water - Temperature control with actual and setpoint display: STÖRK-TRONIC, Type ST 96-35.02K - Water circulation pump: SPECK - An external cooling unit is required for cooling (the cooled water is fed to the temperature control unit) - Movable on 4 rollers Dimensions L x W x H: 620 x 260 x 670 mm Weight: 55 kg Good condition

Year of construction: 2005, condition: excellent (used), The designation TSHK160 refers to a rapid-heating mixer with a gross volume of 160 liters, while KGU400 describes a large-volume, universal cooling mixer with a gross volume of 400 liters. Both units are optimally matched to each other and enable a continuous, reproducible production process. - In ATEX design / explosion-proof - Bevel helical gear motor: 11 kW, n1 = 1300 rpm n2 = 104 rpm Motor IM V1 - Frequency controlled: 45kW 300/1500 rpm - Product-contacting parts: stainless steel 1.4541 - Hopper diameter: 300/200 x 350 Cooling mixer KGU400: - Capacity of the vessel KGU400: 391 liters - Capacity of the jacket KGU400: 45 liters - Min./Max. temperature TS. vessel and jacket KGU400: 5/95 °C - Min./Max. pressure PS. jacket KGU400: 0 / 0.5 bar - Test pressure PT jacket KGU400: 0.72 bar - Motor power: 11 kW High-speed heating mixer TSHK160: - Capacity of the vessel TSHK160: 210 liters - Capacity of the jacket TSHK160: 30 liters - Min./Max. temperature TS. vessel and jacket TSHK160: 0/158 °C - Min./Max. pressure PS. jacket TSHK160: 0/6 bar - Test pressure PT jacket TSHK160: 9.3 bar - Motor power: 45 kW - Working volume: 168 liters Accessories: 1. Platform with stairs MSH 80 Kjdpjiup H Tofx Aklenb 2.Temperature control unit 30 kW 3. Hopper 4. Control panel 5. Control cabinet 6. Dust filter DN 200/ 100 7.Dust filter DN 150/ 100 8.Technical doc. Message: It was used in a technical plant for wood chip and melamine resin additives.

Year of construction: 2024, operating hours: 2 h, condition: new, functionality: fully functional, For sale is an as-new spiral cooling tower made of stainless steel 304. As a precautionary measure, the basket was completely shot-blasted, and every single stainless steel component was pickled and then hand-polished. All screws and nuts have been replaced with new ones, all shafts have been replaced with stainless steel, and all ball bearings have also been replaced with stainless steel deep groove ball bearings. Replacement motors (drive for the basket and for the modular belt), as well as approximately 20 meters of modular belt, are included as spares. Total modular belt width: approx. 340 mm, blue area width approx. 280 mm, outer side areas on the right and left made of stainless steel. Total belt length: 100 m. Number of tiers: 9. Spacing between each tier: 105 mm. Overall tower height: 2060 mm. Kedpfx Aeyvrvpsklenb Overall length incl. discharge belt: approx. 4000 mm; discharge section: approx. 2000 mm; total width: 2235 mm; running surface inner width: 370 mm; running surface outer width: 465 mm. Modular belt is made of stainless steel and POM. This spiral cooling tower also comes with a Z-belt. The Z-belt shown is for reference only and is not the original.

Condition: as good as new (ex-display), functionality: fully functional, Ferwood Code: RS0003205 - Manufacturer Code: 2161A0065 - Condition: Like new (display item) - Functionality: Fully functional - Compatible Machine: CNC HOMAG - WEEKE - BIESSE - SCM - MORBIDELLI - If interested we offer an overhaul service, contact us. Knodpfov Azcmox Aklsb

Condition: excellent (used), Huber Unichiller 055Tw Recirculating Chiller Manufacturer: Peter Huber Kältemaschinenbau GmbH Type: Unichiller 055Tw Year of manufacture: 2014 Machine type: water-cooled recirculating chiller Temperature range: -10 to +40 °C Cooling capacity at +15 °C: 5.5 kW Offered for sale is a used Huber Unichiller 055Tw with a water-cooled refrigeration unit, recirculating pump, and Pilot ONE touchscreen control. The Unichiller is designed for externally closed temperature control circuits and is suitable for heat removal in industrial and technical processes, for cooling machines and systems, and for applications in laboratories, research, and production. Technical data: Manufacturer: Peter Huber Kältemaschinenbau GmbH Model: Unichiller 055Tw Year of manufacture: 2014 Serial number: 203739/14 Temperature range: -10 to +40 °C Temperature stability at -10 °C: 0.5 K Power connection: 400 V / 3~ / 50 Hz Current consumption: max. 7 A Refrigerant: R507 Refrigerant quantity: 1.0 kg Max. pressure: 25 bar Protection class: IP20 Cooling capacity: at +15 °C: 5.5 kW at 0 °C: 3.0 kW at -10 °C: 1.5 kW Recirculating pump: C3 Max. flow rate: 100 l/min Max. delivery pressure: 6.5 bar Pump connection: G 1 1/4 AG Cooling water connection: G 1/2 AG Min. cooling water differential pressure: 0.6 bar Max. cooling water pressure: 6 bar Min. filling volume: 5.9 l Expansion volume: 7.5 l Control: Pilot ONE controller with 5.7" color touchscreen Internal temperature sensor: Pt100 Connection for external Pt100 sensor Digital interfaces: Ethernet, USB, and RS232 Digital level indicator Kodpfx Ajzui T Hjklenb Dimensions: Width: approx. 600 mm Depth: approx. 600 mm Height: approx. 1450 mm Weight: approx. 168 kg Equipment: Water-cooled refrigeration unit Recirculating pump Pilot ONE touchscreen controller Stainless steel housing Atmospherically open expansion tank Digital level indicator Ethernet, USB and RS232 interfaces Movable unit on castors Process and cooling water connections Shipping data: Weight of the unit: approx. 168 kg Dimensions of the unit: approx. 600 × 600 × 1450 mm Due to its size and weight, the unit will be shipped by freight forwarder. Condition: Used condition with corresponding optical signs of wear. Scope of delivery: 1x Huber Unichiller 055Tw 2x Stainless steel flexible hose Scope of delivery as shown in the pictures. The unit is available for immediate delivery. Inspection possible by appointment. The scope of delivery corresponds to the pictures. Subject to changes, errors and prior sale.

Condition: good (used), Year of construction: 2003, functionality: fully functional, inner dimension width: 1,300 mm, total length: 6,000 mm, total width: 1,900 mm, Used for cooling after painting/coating processes where the paint/coating has been heated during drying. Knjdpfjzbau Nex Akleb

Condition: used, Year of construction: 2004, machine/vehicle number: PST31, Used FISCHER Complete Skid-Mounted Pasteurization & Cooling LineTechnical Specifications & Performance DataThis skid-mounted plate heat exchanger pasteurizer is engineered for high-throughput thermal processing with integrated cooling and CIP functionality. Manufactured by FISCHER engineering and built on a stainless steel skid, it offers rapid deployment and reliable performance for beverage production and industrial packaging environments.Type: Plate heat exchanger pasteurizer (EUROCAL series)Model: EUROCAL 18CFGThroughput: 6,000 L/hSections: 4-section plate pack for heating, regeneration, and coolingDesign pressure (PS): 6 barManufacturing year: 2004Construction: High-grade stainless steel skid and process contact partsChiller module: Air-cooled heat-pump type (Cooling 30.0 kW; Heating 32.0 kW; Refrigerant R407C)Advanced Automation & Control SystemsThe pasteurizer features centralized automation for precise thermal profiles and repeatable product quality across shifts.Control panel: Central stainless steel electrical cabinet with PLC and touchscreen HMIInstrumentation: Pressure gauges, flow control, and temperature sensors for closed-loop regulationProcess analytics: Inline quality monitoring to supervise key product parameters in real timeCIP automation: Pneumatic valve islands and control heads orchestrating automated cleaning cyclesProduction Line Integration CapabilitiesDesigned to integrate seamlessly upstream of filling, this second hand thermal processing unit connects easily to existing utilities and can be paired with a used bottling line or new production line layouts.Inline/standalone: Operates as a standalone pasteurization and cooling skid or inline within a complete packaging machinery lineFormat flexibility: Suitable for multiple liquid products prior to filling in PET, glass, or other containersQuick connection: Skid piping and utility stubs facilitate fast commissioning and changeoversMachine Condition & Maintenance HistoryProfessionally maintained and presented in ready-for-operation condition, this equipment supports immediate relocation and rapid start-up for beverage production or food processing facilities.Status: Ready for immediate operationUpkeep: Well-maintained, industrial-grade components designed for continuous dutyOperational Performance & VersatilityIdeal for high-quality thermal treatment with efficient energy recovery, ensuring consistent pasteurization while protecting sensory attributes.Applications: Milk pasteurization, fruit juice processing, syrup handling, and brewery wort coolingEnergy efficiency: Regeneration section increases thermal efficiency and reduces utility loadQuality assurance: I... Knsdsy Ai Hljpfx Akljb

Condition: excellent (used), mileage: 844,000 km, power: 182 kW (247.45 HP), first registration: 11/2008, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 5,400 mm, fuel: diesel, fuel tank capacity: 430 l, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 8, emission class: euro5, suspension: steel-air, total length: 9,400 mm, total width: 2,600 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, loading space length: 7,200 mm, loading space width: 2,480 mm, loading space height: 2,450 mm, Year of construction: 2008, Equipment: ABS, cruise control, electric window regulation, power mirror, spoiler, tail-lift, traction control, = Additional Options and Equipment = - 430-litre diesel tank - Aluminium fuel tank - Heated exterior mirrors - Driver comfort seat - Roof spoiler - Speed limiter - Multifunction steering wheel - Sun visor = Remarks = GOOD CONDITION DAF FACF65-250 4x2 REFRIGERATED TRUCK WITH AS-TRONIC AUTOMATIC GEARBOX, CARRIER SUPRA D/E REFRIGERATION UNIT AND D’HOLLANDIA 2,500 KG TAIL LIFT!! 250HP, EURO 5, 6-CYLINDER ENGINE!! AS-TRONIC AUTOMATIC TRANSMISSION!! REAR PARK DISTANCE CONTROL!! SUNVISOR!! ROOF SPOILER!! CENTRAL LUBRICATION!! ETC.!! ECF EINDHOVEN REFRIGERATED BOX: DIMENSIONS (INSIDE): APPROX. LENGTH x WIDTH x HEIGHT: 7.20 M x 2.48 M x 2.45 M!! CARRIER SUPRA DIESEL/ELECTRIC REFRIGERATION UNIT!! D’HOLLANDIA DHLSU 11 2,500 KG TAIL LIFT!! TRUCK IS IN GOOD RUNNING CONDITION, READY FOR WORK!! MORE DAF 4x2 / 4x4 / 6x4 / 8x4 TRUCKS IN STOCK FOR SALE!! (>85 TRUCKS/TRAILERS IN STOCK)!! PLEASE CHECK OUR WEBSITE: SHIPPING, CONTAINERISATION, TRANSPORT, TRANSIT REGISTRATION OR LOADING? NO PROBLEM FOR US! WE ARE A “ONE STOP SHOP” COMPANY!! YOU CAN ALSO WATCH OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION! (?v=G1cTWpn_7kQ) ENGEL TRUCKS: "YOUR GLOBAL TRADING PARTNER" Ksdouy I R Nspfx Akljnb Refrigeration unit brand: Carrier = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 6,693 cc Transmission Gearbox: AS-TRONIC, 8 speeds, automatic Axle Configuration Tyre size: 315/70R22.5 Brakes: Disc brakes Front axle: Max. axle load: 7,500 kg; Left tyre tread: 80%; Right tyre tread: 80%; Suspension: leaf springs Rear axle: Twin tyres; Max. axle load: 11,500 kg; Left inner tyre tread: 70%; Left outer tyre tread: 70%; Right inner tyre tread: 70%; Right outer tyre tread: 70%; Reduction: single reduction; Suspension: air suspension Weights Unladen weight: 9,540 kg Payload: 9,460 kg Gross vehicle weight: 19,000 kg Functional Tail lift: D’HOLLANDIA DHLSU 11, rear tailgate, 2,500 kg Cooling: +20 °C to -20 °C Body make: ECF-EINDHOVEN SUPRA 550 DIESEL / ELECTRIC Refrigeration unit: Diesel and electric (4,350 operating hours diesel; 1,320 electric) Condition Technical condition: very good Visual condition: good Identification Registration number: BV-PF-65 More information Please contact Sales Department or Erik Engel for further information.

Year of construction: 2017, condition: excellent (used), Included: screw conveyor; vibrating conveyor pipe with vibration motor drive. Knjdpfxjinwfie Aklob Total height: approx. 9250 mm Effective conveying height: 5800 mm Outer diameter: Ø 1200 mm Conveyor cross section: 300 x 100 mm Feeding height: approx. 1650 mm (machine) approx. 3100 mm (incl. support) discharge height: approx. 8900 mm (incl. support) number of spiral shelves: approx. 32 pieces heat exchanger surface: approx. 27,5 m² number of cooling/heating circuits: 32 pieces Material: stainless steel So far in use for conveying and cooling of granules and glass fibers (approx. 2.5 t/h) Free loading; Currently, the device can still be viewed built in operation.

Condition: excellent (used), We have 140 heavy duty stainless steel cooking racks available. Can be used for cooling or defrosting. Knjdpfx Akjzi Em Sjleb Dimensions 1000mm x 800mm wire trays on 1200mm heavy duty frames. 7 shelves on each one.

Year of construction: 2022, condition: as good as new (ex-display), Air handling unit with EC technology for hall climate control or heating, cooling capacity in conjunction with a chiller system of 150 kW at 7/12°C, heating capacity 300 kW, air flow rate 20,000 m³/h, 4 x 500 mm air outlets, compact design. Knodpfx Akjfzrgyslsb

Condition: excellent (used), This system If designed to continuously cool veg products in glycol chilled water what was bought new by our customer to chill sachets of hot sauces and soups at 2500 KG per hour. Available separately or as a line with infeed and outfeed conveyors. Kedpfx Akoh Uyg Nsljnb

Condition: good (used), Chiller, cooling water circuit, heat exchanger, cooling for spot welding machine, refrigeration compressor, refrigeration unit, cooling compressor, refrigeration unit, cooling compressor, compressor, motor compressor, cooling machine, cooling unit, coolant pump -Refrigeration compressor: cooling unit Cooling 7 -Type: FK 7 -Cooling capacity: 1.6 kW -Volume flow rate: 5.2 l/min -Dimensions: 570/360/H260 mm -Weight: 22.7 kg Knjdpezr Hcmofx Akljb

Condition: excellent (used), Year of construction: 2017, Manufacturer: Riedel Type: RW 27/0SR Year of construction:2017 Refrigerant: R134a Kedpfxet Da Tvs Aklenb

Year of construction: 1991, condition: ready for operation (used), Dalex DR-F 2 Knjdpfxeftbtmj Aklob 0.35 m³/h 220 Volt No. 109115732 Year of manufacture 1991 Refrigerant R12 – needs to be refilled.

Condition: used,