Used Coolant for sale (4,332)

Condition: good (used), Year of construction: 2005, travel distance X-axis: 560 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 2,400 m/min, feed rate Y-axis: 2,400 m/min, feed rate Z-axis: 2,400 m/min, table width: 450 mm, table length: 950 mm, Fixed table 950 x 450 mm Feeds all direction ISO-40 and 3kW 3 Axis Digital Read Out Systsem CE-Safety  Coolant system with semi closed lower base  X-Axis: 560mm Y-Axis: 320mm Z-Axis: 400mm Table Length: 950mm Fpjdpfxoxdltbs Afnoc Table Width: 450mm Table load: 350 Spindle speeds: 2240Rpm Feed rate X-Axis:2400mm/min. Feed rate Y-Axis:2400mm/min. Feed rate Z-Axis:2400mm/min. Stroke pinole: 0 - 95mm Length: 1800mm Width: 1600mm Height: 1900mm Weight: 1700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2018, bore capacity in steel (diameter) 75 mm spindle taper: MT 5 spindle stroke - max. 380 mm transmission ratio 2 11,2 - 2.000 quill stroke 16 mm feed for quill 1: 16 spindle throat 2000/ 38 mm Fpjdpfjyh Rqfex Afnjc spindle drive 15 kW weight 7,1 t Thread in steel, strength 600 N/mm² max. M75x4 Vertical swivel arm adjustment max. 950 mm Drill slide adjustment on the swivel arm 1614 mm Distance between spindle nose and clamping surface max. / min. 2000/670 Accessories: Heidenhain Radial digital display, clamping cube 1000 x 750 x 500 mm Coolant system, work light

Condition: used, Struers Type: Struers Accutom-5 Struers Accutom-5 Precision Cutting Machine Laboratory saw including accessories & cutting discs Description: For sale is a Struers Accutom-5 precision cutting machine. This is a high-quality laboratory and precision saw designed for accurate sectioning of metals, ceramics, minerals, electronic components, sample materials, and workpieces with minimal deformation and excellent cut quality. Ideal for material testing, metallography, precision engineering, research, workshops, or laboratory use. The machine operates with adjustable speed, feed control, and integrated cooling, enabling precise, clean, and reproducible cuts. Extensive accessories and several original Struers cutting discs are included (see photos). Features: - Precise sectioning of materials and sample specimens - Adjustable cutting speed and feed rate - Minimal material loss due to precision cutting - Automatic or manual cutting operation - Recirculating coolant system to protect the sample and cutting disc - Adjustable cutting force (low / medium / high) - Programmable cutting modes - Very smooth operation and accurate positioning Technical Data: Device: Struers Accutom-5 Precision Cutting Machine Speed: 300 – 3000 rpm Feed: 0.005 – 3.0 mm/s Fodjyhpqgjpfx Afnspc Positioning speed: X/Y each 13 mm/s Cutting force: approx. 20 N / 40 N / 60 N Cutting discs: Diameter: 75 – 152 mm Max thickness: 2 mm Mounting hole: 12.7 mm Max sample size: Clamping length: up to 225 mm Cutting length: up to 30 mm (with Ø 20 mm sample) Coolant tank: approx. 4 liters Noise level: approx. 65 dB(A) Power / Electrical: Mains voltage: 220 – 240 V Frequency: 50 – 60 Hz Power input: approx. 370 W Current consumption: approx. 2.7 – 3 A Fuse: 6.3 A slow-blow Dimensions & Weight: Width: approx. 510 mm, Depth: approx. 700 mm, Height: approx. 270 mm Weight: approx. 45 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery (see photos): - Struers Accutom-5 cutting machine - Several original Struers cutting discs (Diamond / SiC / Al2O3 depending on set) - Sample holder / clamping accessories (see photos) - Documentation / manual / spare parts documents - Integrated coolant tank (Subject to changes and errors in the technical data. All information provided without liability!) We are happy to answer further questions for you by phone.

Condition: used, Year of construction: 1990, Technical details: turning diameter: 445 mm turning length: 2000 mm turning diameter over bed slide: 660 spindle bore: 65 mm spindle speeds:: 16 - 3150 U/min. rapid motion - x-axis: 10 mm/min rapid traverse Z-axis: 15 m/min total power requirement: 34 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 6 x 2,5 x 2,2 m with CNC Control TX 8 D C-axis driven tooling 14 station turret head 3 jaw chuck dia. 315 mm tailstock, steady as NC-axis diverse driven toolholders diverse turning toolholders chip conveyor and coolant attachment Fedpsw I R Ndjfx Afnjpc *

Condition: excellent (used), Year of construction: 2012, We offer: COMPACT BED MILLING MACHINE K I H E U N G – POINT U 6 (2012) HEIDENHAIN TNC 124 Specifications: - Travel X-axis: 1600 mm - Travel Y-axis: 710 mm - Travel Z-axis: 700 mm - Height table to vertical spindle: 50 – 750 mm - Height table to horizontal spindle: 60 – 760 mm - Working table: 2200 x 550 mm - Table load capacity: 3,000 kg - Main motor power AC: 11 kW - Tool taper: ISO 50 - Stepless spindle speeds: 40 – 1,600 rpm - Feed rate X/Y: 2,000 mm/min - Rapid traverse X/Y: 5,000 mm/min - Feed rate Z: 1,000 mm/min - Rapid traverse Z: 2,500 mm/min - Machine weight approx.: 8,000 kg Equipment: - Electronic hand-wheel (HEIDENHAIN) - Table enclosure - Hydraulic tool clamping - Universal milling head - Coolant system - Floor pan - Documentation Fpjdpfxjyh Ngfe Afnec Additional: - Completely new gearbox from spare parts inventory The machine is well maintained and fully operational. Clamping elements shown on the table are not included. Available from week 13/2026. Sale subject to prior sale.

Condition: used, Technical details: faceplate diameter: 1000 mm swing diameter: 1600 mm turning height: 1200 mm main drive: 75 kW faceplate speeds from - to: 7 - 800 U/min milling motor: 25 kW milling head speed: 7 - 3000 U/min milling spindle - taper: ISO 50 cross rail adjustment - vertical: 800 mm ram head dimension: 240 x 240 mm weight of the machine ca.: 40 to dimensions of the machine ca.: 9 x 7,8 x 6,0 m Fodpfx Afjvb Dcaenjpc Machine general overhould in 2004 and equiped with Siemens 840 D control - tool changer rack magazine - C-axis, live tooling, - Transmit function electronical Y-axis - angular milling head - complete splash housing - coolant device, chip conveyor *

Condition: used, Technical details: faceplate diameter: 1400 mm swing diameter: 2000 mm turning height: 1270 mm main drive: 80 kW faceplate speeds from - to: 1 - 355 U/min max. workpiece weight: 6.000 kg milling motor: 37 kW milling head speed: 7 - 3000 U/min milling spindle - taper: ISO 50 cross rail adjustment - vertical: 800 (8 x 100 mm) mm ram head dimension: 240 x 240 mm max. ram stroke: 1250 mm weight of the machine ca.: 50 to total power requirement: 133 kVA dimensions of the machine ca.: 11 x 5 x 6,4 m Machine general overhould in 2008 and equiped with CNC SIEMENS 840 D control - tool changer for 72 tools Fpsdpfevb Dcmox Afnoc - C-axis, live tooling - angular- and straight tool holder head with CAPTO taper - Transmit function - complete splash housing - coolant device, chip conveyor - diverse accessories *

Condition: used, Technical details: x-travel: 6500/13150 mm y-travel: 4000 mm z-travel: 1250 mm w-axis: 2250 mm table surface area: 5500/12150 x 3000 mm max. workpiece weight: 70.000/105.000 kg ram head dimension: 480 x 510 mm milling spindle motor: 63 kW max. torque on the spindle: 3300 Nm tool taper: DIN 39871 AD ISO 50 milling head speed: 6,3 - 4000 U/min feed speeds: 1 - 24000 mm/min w-axis: 1 - 6000 mm/min. distance between columns: 3500 mm passage: 3000 mm total power requirement: 120 kW weight of the machine ca.: 245 t dimensions of the machine ca.: 29,0 x 7,7 x 8,1 m The machine is in mint condition and was generally overhauled in 2020! with CNC SIEMENS 840 D autom. tool magazine for 153 tool stations autom. milling head magazine for 6 heads milling heads - straight - straight extended length - milling head -angular head standard - 4000 rpm, 144 x 2,5°, ISO 50 milling head -angular small extended length -40 kW, 4000 rpm, 1800 Nm, 144 x 2,5°, ISO 50 milling head -universal index - 40 kW, 4000 rpm, 2100 Nm, C-axis 144 x 2,5° , B-axis +/- 44 x 2,5°, ISO 50 Fpsdpfx Afowc A Shsnjc coolant attachment, chip conveyor *

Condition: used, Technical details: grinding length: 12000 mm grinding width: 2800 mm workpiece height: 2510 mm max. workpiece weight: 24.000 kg table surface area: 11990 x 2500 mm distance between columns: 2820 mm cross rail adjustment: 2510 mm table feed: 1 - 40 m/min total power requirement: 110 kW weight of the machine ca.: 151 t dimensions of the machine ca.: 32,5 x 9 x 6,73 m .....machine is in top condition for high precision work! with CNC SIEMENS 840 D 1 universal grinding head, 22 kW swivelling of the grinding spindle +/-110° grinding wheel dimension 700 x 130 mm vertical stroke 1000 mm with dressing unit Fodpfewc A Snex Afnepc 1 surface grinding head, 30 kW grinding wheel dimension 600 x 150 mm vertical stroke 230 mm with dressing unit coolant and filtering unit diverse grinding wheel flanges *

Condition: used, Year of construction: 1980, Technical details: Fpodpfx Afswy Ri Nsnsc grinding diameter: 380 mm grinding length: 1000 mm centre height: 180 mm grinding wheel diameter: 400 mm max. workpiece weight between centres: 250 kg total power requirement: 10 kW weight of the machine ca.: 4,1 t dimensions of the machine ca.: 3 x 2 x 1,6 m with internal grinding attachment with fixed and swivelling headstock with coolant tank *

Condition: used, Year of construction: 2001, Technical details: x-travel: 600 mm y-travel: 580 mm z-travel: 580 mm numbers of pallets: 2 pallet size:: 400 x 400 mm max. workpiece weight: 400 kg spindle taper ISO: 40 spindle speeds:: 35 - 12000 feed speeds: 1 - 50000 mm/min Fodowv Tmvspfx Afnspc rapid speed: 50 m/min total power requirement: 25 kW weight of the machine ca.: 12 t dimensions of the machine ca.: 3,6 x 3,6 x 2,9 m with CNC SEICOS 16 M ( FANUC base ) autom. toolchanger 61-pockets pallet indexing 1° chip conveyor and coolant attachment exhauster clamping cube and diverse toolholders *

Condition: used, Year of construction: 2005, Technical details: turning diameter: 275 mm turning length: 900 mm spindle passage: 65 mm power capacity at 100 % load: 25/20 kW spindle turning speed range: 1 - 5000 U/min spindle diameter in front bearing: 110 mm c-axis: 1 - 500 U/min. number of workpiece supports: 4 tool turret: 1 x-axis: 290 mm y-axis: 165 mm z-axis: 360 mm b-axis: 360 ° rapid speed: 18/30 m/min number of tools: 2x2 + 2x2 number of driven tools: 2x2 + 2x2 mm toolpiece turning speed range: 8000 / 2000 U/min power capacity: 25% ED 5,8 kW tool taper: TRAUB 60 tool turret: 2/3/4 x-axis: 170 mm z-axis: 600/950 mm y-axis: +/- 60 mm rapid speed: 18/15/30 m/min number of driven tools: 10 mm toolpiece turning speed range: 1 - 6000 U/min power capacity: 25% ED 5,8 kW tool taper: DIN 69880 40 x 63 total power requirement: 95 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 10,0 x 3,5 x 3,0 m with CNC TRAUB TX 8i, Barloader TRAUB Stamag DNH61 / 3000, Main and Sub spindle with C-axis 1 support with B-axis 3 turret supports dust exhauster, coolant attachment with coalescence-seperator and chip conveyor 2 pc. 3-jaw chuck SMW KNCS-N 170-43 2 pc. HAINBUCH Spanntop chuck 40 pc. various tool holder non-driven 6 pc various tool holder driven Spare parts package Fedpfx Aewp D Nbofnjpc *

Condition: used, Year of construction: 1998, Technical details: Fodpfx Afowwlt Renopc turning diameter: 830 mm turning length: 4000 mm turning diameter over bed slide: 540 mm spindle bore: 130 mm turning speed range: 2 - 1600 U/min rapid speed: 4 / 5 m/min feed speeds: 1 - 2000 mm/min total power requirement: 55 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 7 x 2,2 x 2 m with Teach In controll R&D MTC-K MULTIFIX toolpost size D coolant attachment *

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, spindle speed (max.): 12,000 rpm, Mazak Variaxis 500-5X five-axis machining centre with twin pallet system, equipped with Mazatrol 640M 5X CNC control. Pallet dimensions: 500 mm x 500 mm (50 mm pitch). Spindle speeds up to 12,000 rpm. High-pressure coolant through spindle. Travels: X axis: 510 mm, Y axis: 510 mm, Z axis: 460 mm. Fjdpfxoyigk Rj Afnjpc Five-axis machining centre with twin pallets, Mazatrol PC Fusion 640M CNC control, 40-position tool changer, BT40 taper, 12,000 rpm spindle, TSC (Through-Spindle Coolant), spindle probe, automatic tool setter probe, chip conveyor, 3 automatic operations, 1,539 automatic tool changes. Options include: EIA, spiral interpolation, EIA 3D compensation, rotation, geometry scaling, external data I/O, high-speed processing, form compensation, threading. Inverse time, Auto TLM, Comparison Stop, spline interpolation, G54.1, Sync.tap, G00 Slope Const, Variable 600 sets, Navigation, Smart Card Operation, EIA helical tapping cycle, Mazatrol Helical, Protocol B, Mazatrol co-ordinate offset, Mazatrol planetary tapping, automatic pecking, Ethernet operation.

Condition: used, Year of construction: 2000, max. workpiece diameter 40 mm min. workpiece diameter 10 mm workpiece length 200 - 640 mm Control SPS Siemens S5 95 U total power requirement 25 kW weight of the machine ca. 5 t dimensions of the machine ca. 8,5 x 2,8 x 2,35 m Hydraulic cutting and double-end machining machine suitable for pre-machining trapezoidal thread spindles and other round workpieces in the form of sawing off the bar and double-sided end machining such as chamfering, countersinking and drilling with fixed parts and rotating tools. Machine consisting of: - Basic machine model TR 60/4-650, passage 640 mm - Bar magazine for bar lengths 2 - 3.5 m - Normal version for solid material up to ? 40 mm - Central position of the bar feed rollers - Bar feed unit - Feed gripper in standard version - Cross switch with 4 clamping stations model TR 300.00 - 4 base jaws, width 80/140 mm, contact ? 75 mm - Swiveling cross switch in both directions - Saw unit with worm drive TR 200.00, stroke 100 mm - Saw blade 350 mm, speed 25/39 rpm - Motor power 2.6/3.2 kW - Motorized positioning of saw head - Automatic positioning of saw stand with hydraulic. Clamping - Saw blade guide - Processing unit no. 1 - USP.00/M - Speeds 842/1684 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid feed 40 mm - Spindle mount ISA 40/M 16 - Toothed belt drive - Machining unit no. 3 - USP.00/M - Speeds 842/1684 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid feed 40 mm Fpsdpfx Ajvp Sd Iefnjc - Spindle mount ISA 40/M 16 - Toothed belt drive - Machining unit no. 4 - USP.00/M - Speeds 943/1882 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid feed 40 mm - Spindle mount ISA 40/M 16 - Unloading chute - Millimeter bars for all adjustment movements - Hydraulic system with feed pump SAUER SUNDSTRAND - Pressure accumulator - Rexroth flow regulator for machining units and saw - Coolant system with filter and container - Coolant pump CALPERA - Electrical equipment in separate electrical control cabinet, Control voltage 24V/50 Hz - PLC SIEMENS S5 95 U - Machine light - Flashing light to signal machine downtime - Central lubrication - Chip conveyor. In 2011, an extensive mechanical overhaul was carried out to optimize positioning and centering accuracy for € 25.000. In addition, switches, some cables, ball bearings, seals, hydraulic hoses, etc. were replaced. The machine has hardly been used in recent years; the seller estimates the whole operating hours at around 24,000. Machine under power in sellers factory. Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), Year of construction: 2021, grinding length: 813 mm, grinding width: 410 mm, workpiece weight (max.): 420 kg, grinding wheel diameter: 355 mm, table length: 813 mm, table width: 406 mm, 10-inch touch screen (Delta PLC) magnetic table 800x400MM Fedsyh Nn Aopfx Afnspc grinding wheel 355x50x127MM spindle 5 HP machine weight 3400KGS coolant tank

Condition: good (used), Year of construction: 1990, Hydraulic Surface Grinding Machine with Automatic Vertical Feed Max. grinding length: 670 mm Max. grinding width: 280 mm Max. grinding height: 400 mm Table speed, longitudinal: 2 – 35 m/min Table speed, cross: 0.3 – 40 mm/stroke Rapid traverse: yes Grinding wheel dimensions: 300 / 76 x 40 mm Drive power: 4 kW Machine dimensions (L x W x H): 2000 x 1850 x 2000 mm Machine weight: 2300 kg Hydraulic & electrical unit dimensions (L x W x H): 1200 x 800 x 2000 mm Hydraulic & electrical unit weight: 650 kg Accessories / Special features: • Permanent magnetic chuck 630 x 200 mm • Automatic vertical feed with digital display • Manual dresser • Coolant system • Separate hydraulic unit Fpjdpsf Um Rajfx Afnoc • Grinding wheel • Machine leveling elements The following works have been carried out by us: o Hydraulic cylinder for table stroke re-sealed o New filters installed in hydraulic unit o Cross feed handwheel adjustment rebuilt with new bearings Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 2000, machine/vehicle number: 7853, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, table length: 6,000 mm, table width: 2,000 mm, table load: 17,000 kg, Travelling column milling machine | FPT Sirio-M50 - Heidenhain control system - 60-position automatic tool changer - Coolant treatment and filtration unit - Chip conveyor - Cooling unit, manufacturer Deerosdassi (Italy) - Electrical cabinet - Full machine enclosure (protective housing) Fpodpfx Asxzzlhofnoc An inspection is possible at any time by appointment.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 1148877, Specification Table size 1016mm x 356mm X axis traverse 508mm Y axis traverse 406mm Z axis traverse 356mm Spindle BT40 Spindle speeds 0-10,000rpm Spindle motor 11.2kW Rapid feed rate 30.5m/min Toolchanger capacity 20 Tools Approximate weight 2313Kg   Machine Equipped with Haas CNC Control High flow coolant system Lighting Fpjdox Afpgspfx Afnoc Enclosed guarding Manual

Condition: excellent (used), Year of construction: 2000, Machine-Details: Stock-No. 1022-2416 Type of machine Tool Room Milling Machine - Universal Make DECKEL Type FP 1 Year of manufacture 2000 Type of control conventional Storage location Monheim (Germany) Country of origin Germany Delivery time Immediately Freight basis Ex warehouse, loaded on truck Technical details: x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information: The machine is in very good condition and comes from a training workshop. Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input Fodeyhdbmjpfx Afnjpc - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,000 rpm, travel distance X-axis: 640 mm, travel distance Y-axis: 210 mm, travel distance Z-axis: 2,000 mm, spindle motor power: 67,000 W, tool weight: 5,000 g, swivel angle B-axis (max.): 360 °, swivel angle C-axis (max.): 360 °, number of axes: 4, This 4-axis Index G 400 horizontal turning machine was manufactured in 2008. It features a maximum turning diameter of 630 mm, a length capacity of 2000 mm, and supports a workpiece weight up to 300 kg. Equipped with a high-speed milling spindle at 6000 rpm and a main spindle speed of 3000 rpm, it offers robust machining capabilities. Consider the opportunity to buy this Index G 400 horizontal turning machine. Contact us for more information. Fpjdpjx D D Ecofx Afnoc Main spindle 0102 direct driveMaximum material throughput: 102 mmMaximum speed: 3000 rpmFront bearing diameter: 170 mmVariable hollow shaft motorPower at main spindle D102:Power at 100/40% duty cycle: 53 kW/68 kWTorque: 675 Nm/900 NmWork spindle alignment and switching device D1022.5° increments via indexing discHydraulicly actuated hollow clamping cylinder D102 with analog clamping stroke monitoringMaterial clearance: 102 mmStroke: 48 mmMaximum clamping force (tension/compression): 10,900 dNMulti-clamping pressure deviceClamping pressure adjustable from 8 to 80 bar via a multi-stage parts catalog for the main spindle clamping cylinder. Chuck release movement required for transitioning to a lower clamping l carrier 1 (standard equipment)Cross slide X, Z, turning length 2000 h internal coolant supply and shut-off valve, ball screws D=40 mmin the X-axis, D=50 mm in the Z-axis. Axis drives protected by overload clutches, counterweight in the s X ZWorking travel mm: 320 2000Rapid traverse speed m/min: 20 40Feed force N: 14000 14000X-axis measuring system: Glass scale (absolute)Z-axis: ROQ encoder (absolute)X-Y-Z-B housing (WT1)Turret with AC motor, positioned by spur gears, hydraulically lockedY-axis quill, hydrostatically mounted, lockable via spur gearsBall screw, D=40 mmOverload clutchTravel: 220 mmRapid traverse speed: 12 m/minFeed force: 24,000 NROQ encoder (abs)B-axis drive with AC motorSwivel angle: 360°Tool drive unitwith two clutches:Maximum speed: 6,000 rpmPower (25%) at n= 6,000: 17 kWMaximum torque (25%): 37 NmDisc turret with 12 stations on cross slide 1Tool holder system DIN 69880-40x63Increased repeatability during tool changes due to additional W-slotsMultifunction unit on cross slide 1Maximum speed: 6,000/1,500 rpmGearbox: i=4Torque: 36/144 NmTools: SK50Front bearing diameter: 75 mmInternal coolant feedthrough, disc spring clampingTool carrier 2, right - X, ZTurning length 2000 mm, preferably oncounter spindle machine with internal coolant supply and shut-off valve, turret control via AG motor, ball screws D= 50 mm for Z-axis, D= 40 mm for X-axis. Axis drives protected by overload clutches, counterweight system in ret head oriented to the right towards the counter s X ZTravel mm 210 2000Rapid traverse speed m/min 20 40Feed force N 8600 14000X-axis measuring system: glass scale (abs)Z-axis: ROD encoder (abs)Disc turret with 10 on cross slide 2Tool holder system DIN 69880-40x63Increased repeatability during tool changes thanks to additional W-slotsPositioned by face gearing, hydraulically lockedCounter spindle D102, size 11-DIN 55026/55021 and ISO 702/1Turning length 2000 mmZ-axis slide driven by AC motor and 50 mm diameter ball screwAxis drive protected by overload clutchIn the working position, the slide is held against the stop by the AC motor.

Condition: excellent (used), Year of construction: 2009, Machine-Details: Stock-No. 1022-2352 Type of machine Gear Hobbing Machine - Horizontal Make MONNIER & ZAHNER Type KOEPFER MZ 120 Year of manufacture 2009 Type of control CNC Storage location Monheim (Germany) Country of origin Switzerland Delivery time Immediately Freight basis Ex warehouse, loaded on truck Technical details: max. wheel diameter 2-45 mm gear width 250 mm max. module 1,5 mm min. module 0,5 mm Control Fanuc 18i-MB weight of the machine ca. 2,2 t dimensions of the machine ca. 2100 x 1440 x 1700 m Additional information: The combined CNC gear hobbing and worm milling machine KOEPFER MZ 120 is characterized by its flexible usability and is used in the small module area. Just by swiveling the milling spindle from the horizontal to the vertical position and selecting the corresponding operating mode of the CNC control, the worm milling machine becomes a gear hobbing machine and vice versa. CNC control Fanuc 18i-MB (Dialog/ISO) CNC axes = X-axis plunge axis Z-axis longitudinal axis C-axis workpiece spindle B-axis tool spindle V-axis loader axis longitudinal A-axis swivel axis tool spindle head (included as an option) Y-axis shift axis (included as an option) With the following production programs: Worm milling Hobbing Worm hobbing Bevel gear and spur gear milling Bevel gear hobbing Milling cycles = Fodpoyhc Daefx Afnepc straight, oblique, crowned toothing, radial, radial-axial, co- and counter-rotating milling, roughing, finishing, worm gears, straight-toothed bevel gears, face gearing (option only in the partial process) Worms [Equipment] Coolant tank 300 liters KF with LNS Turbo MS 250 Chip conveyor, built in 2021!!! Kraft and Bauer fire extinguishing system Spiral conveyor Machine documentation [Technical data] Workpieces: Workpiece diameter 2-45 mm Max. workpiece length 250 mm Tooth length 150 mm Max. module in steel= 1 mm (gear hobbing) 1.5 mm (worm milling) 0.5 mm (bevel gear hobbing) Tools: Cutter diameter= 16-32 mm (gear hobbing) 40-63 mm (worm milling) Machine: Max. setting angle of milling head= +/- 45° (gear hobbing) +/- 30° (worm milling) Shift travel= 34 mm (manual adjustment) 34 mm (CNC axis) Collet/retraction mandrel W 20 Max. speed of workpiece spindle 770 rpm. Milling spindle drive 0.55 kW Max. milling spindle speed 8000 rpm Axis drives = X-axis (plunging) / travel 80 mm via CNC Z-axis (longitudinal feed) / travel 190 mm via CNC C-axis (workpiece axis) via CNC Rapid traverse = X-axis 6000 mm/min. Z-axis 6000 mm/min. Hydraulic unit 0.37 kW

Condition: good (used), Year of construction: 2001, Machine-Details: Stock-No. 1022-2276 Type of machine Surface Grinding Machine - Vertical Make REFORM Type AR 42 Typ 19 CNC Year of manufacture 2001 Type of control CNC Storage location Monheim (Germany) Country of origin Germany Delivery time Immediately Freight basis Ex warehouse, loaded on truck Technical details: grinding length 4200 mm grinding width 1300 mm workpiece height 550 mm Control SIEMENS 840 D magnetic clamping plate 4200 x 1300 mm segment head diameter 1400 mm grinding motor turning speeds up to 320 U/min. grinding motor 306 kW weight of the machine ca. 50,0 t Additional information: Segment dimensions: 120/106 x 41 x 250 mm Number of segments: 1 set = 26 pieces Grinding motor feed: 0.5 - 35 m/min, infinitely variable Grinding motor feed: - in steps: 0.002 - 1 mm continuous: up to 5 mm/min. infinitely variable Equipment: * CNC-control SIEMENS Sinumerik 840 D * Automatic hydr. swivelling of the grinding motor from hollow to cross grinding * NC-controlled adjustment of the Marposs measuring head by means of precision support. - new grinding dimensions can be entered into the control, whereby the the grinding head automatically adjusts to the corresponding height. * Dresser with adjustment axis in the machine bed * Coolant system * Electro-magnetic table * Switch cabinet * Oil mist extraction * Documentation Fjdpfoyhcxqex Afnopc Dimensions (length x width x height) Bed: 11800x2200x1400 mm, weight 27500 kg Grinding head: 3000 x 2500 x 3100 mm, estimated weight 14 t 2 x Oil mist extraction: 1200 x 800 x 2000 mm each Control panel: 1200 x 800 x 400 mm Small control cabinet: 1400 x 1400 x 800 mm 2 x gears each 1200 x 800 x 500 mm Control cabinet: 1600 x 800 x 2000 mm Control cabinet: 3400 x 600 x 2400 mm

Condition: good (used), Year of construction: 2008, Machine-Details: Stock-No. 1022-E06336 Type of machine Surface Grinding Machine - Horizontal Make ABA / Z & B Type MULTILINE 2507 CNC Year of manufacture 2008 Type of control CNC Storage location Germany Country of origin Germany Delivery time Short-dated Freight basis Ex site, without dismantling and loading Technical details: grinding length 2000 mm grinding width 850 mm distance spindle center to table 900 mm control Siemens 840 D total power requirement 155 kVA weight of the machine ca. 15 t dimensions of the machine ca. 8815 x 4185 x 2963 mm Additional information: CNC Precision Surface and Profile Grinding Machine Technical Specifications: Grinding length 2000 mm Grinding width 850 mm Travel, transverse 750 mm Distance from table to spindle center 900 mm (or 800 mm with intermediate plate) Magnetic plate size 2000 x 700 mm Table load without magnet 3500 kg Table speed 60 m/min. Spindle drive 26 kW Grinding wheel dimensions 500 x 150 x 203.2 mm Grinding wheel peripheral speed 35 m/s Equipment: 3-axis contouring control Siemens 840 D Grinding programs: Full-cut grinding Face grinding Plunge grinding Path grinding X/Y-axis and Y-Z-axis Profile grinding Automatic program sequence with roughing, finishing, fine finishing and spark-out grinding. Multiple plunge grinding for economical production Surface grinding with continuous, continuously programmable cross feed Grinding wheel calibration Plunge/step grinding Face grinding Dressing in the grinding cycle with lift-off amount Fully automatic compensation of dressing amounts Tool management AC servo drives with ball screw and absolute measuring system in the X, Y, and Z axes Preloaded precision roller guides in the X, Y, and Z axes with linear guides Portable electronic handwheel Automatic belt filter system Coolant heating Electro-permanent magnetic chuck Fully enclosed Direct measuring system in the vertical axis Temperature-controlled machine bed for consistent accuracy Linear motor in the X-axis, table speed max. 60 m/min. Swiveling control panel Continuous speed control of the grinding spindle Electrical linear measuring device for cross-travel adjustment with zero point setting in any position, resolution 0.001 mm Electro-mechanical locking via position control of the headstock in the cross direction for profile and plunge grinding Mechanical extraction of coolant mist TAG table dresser Pre-profiling dresser VPG 190 Diamond grinding wheel, 190 mm diameter Software program for pre-profiling dresser VPG Rough profiling (roughing) CNC table profile dresser TAD 190 Profile depth max. 45 mm Contour accuracy +/- 0.0025 mm Swivel angle +/- 65 degrees Max. dressing speed 210 mm/min. Diamond wheel for table dressing machine TAD 190 Regrinding package for diamond wheel Fpjdpfx Aeyhcwtsfnsc Intermediate plate for raising the magnet WinWop profiling software Import of CAD profile data SP 60 JOB Listing expansion package Additional holes for the magnet clamping plate to facilitate removal of workpieces using compressed air Ghost shift circuit for shutting down the machine after the end of the program

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 3,400 rpm, travel distance X-axis: 239 mm, travel distance Y-axis: 51 mm, travel distance Z-axis: 826 mm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS ST-30Y horizontal turning machine was manufactured in 2022. It features a 10-inch chuck, a maximum cutting diameter of 13.75 inches, and a cutting length of 32.5 inches. The machine includes a 12-station BMT-65 turret and live tooling speeds up to 4,000 rpm. Y-axis capabilities allow for off-center milling, drilling, and tapping. Consider the opportunity to buy this HAAS ST-30Y horizontal turning machine. Contact us for more information. • Chuck size: 10 in (≈254 mm) • Maximum bar capacity (through spindle): 3 in (≈76 mm) • Maximum part swing over front apron: 31.75 in (≈806 mm) • Maximum cutting diameter: 13.75 in (≈349 mm) using BMT65 turret • Maximum cutting length: 32.5 in (≈826 mm) • Rapid traverse: X 472 in/min (~12 m/min), Y 472 in/min (~12 m/min), Z 945 in/min (~24 m/min) • Spindle bore: 3.5 in (≈88.9 mm) • Maximum torque: 300 ft-lb @ 500 rpm (≈407 Nm) • Turret: 12-station BMT65 • Live tooling speed: up to 4,000 rpm • Y-axis capability: off-centre milling, drilling, and tapping • Coolant capacity: 55 gal (~208 L) • Air requirement: 4 scfm @ 100 psi (~113 L/min @ 6.9 bar) • Electrical: 3-phase, 195–260 V (region dependent) • Footprint: 151 in × 70 in × 79 in (without conveyor) Additional equipment • Powered (live) tool holders • Various tool holders • Liners Fodpjx D Iixefx Afnjpc