Used Construction Equipment for sale (52,810)

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, Hood shrinking machine, Smipack SE 550, with underframe. Year of manufacture 2008. In very good condition. Kedpfjztqgrex Afkjna

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Machine refurbished by Nodema for packaging products in bundles. The machine has a heat-shrink tunnel attached to the frame for packaging. It can process up to 17 products per minute. The sealing bar is 600mm wide. The film width is up to 800mm. Knjdpfx Asy Tuxzsfkja This machine has an angled infeed, making it ideal for packaging products such as canned beverages with a tray.

Condition: good (used), functionality: fully functional, fuel type: diesel, Year of construction: 2016, operating hours: 9 h, Hybrid LED light tower Smart solar battery and diesel power system Brand: Verdegro Type: LLTT-H Year: 2016 Kjdpfxswhmqro Afkena Solar power system (350 W) High efficiency LED flood lights. Photocell daylight sensor (automatic/on/off) Spring-driven cable drum Optional: Geo fencing by DSE web interface 7 section vertical tower (steel galvanized) Forklift sprockets on top + below chassis Information LED backlight controller screen Hybrid diesel generator Fuel tank capacity 140 L Drip tray / spill container Four telescoping outriggers and leveling jacks Torsion rubber suspension axle

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Reverse osmosis plant. Inlet pressure: 3 bar. Capacity: 4 m³/h. Power: 34 kW. Maximum pressure: 55 bar. Equipped with Grundfos pumps, frame, stainless-steel piping, pretreatment system, tanks and control panel. Serial No.: 2005118. Ksdpfx Aszvchasfksna

Condition: good (used), machine/vehicle number: 19234, Year of construction: 2022, Seacom KOBLINGS-KIT from Uniktruck Kedpfx Afozu Thzskjna

Condition: good (used), machine/vehicle number: 19233, Year of construction: 2022, Seacom KOBLINGS-KIT from Uniktruck Kedpfx Aozu Thnjfkjna

Condition: good (used), machine/vehicle number: 19232, Year of construction: 2022, Seacom KOBLINGS-KIT from Uniktruck Kjdozu Thhjpfx Afkjna

Condition: good (used), machine/vehicle number: 19231, Year of construction: 2022, Seacom KOBLINGS-KIT from Uniktruck Knedpfx Aezu Thbefksa

Condition: good (used), machine/vehicle number: 19230, Year of construction: 2022, Seacom KOBLINGS-KIT from Uniktruck Knjdpjzu Tg Rsfx Afkoa

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Veolia Waste Water Treatment Spare Parts Package (Unused 2021) 2 x Alfa Laval Aldec 45 centrifuge (decanter) Process Application description: IW - waste water Process description: MUE, Biological sludge dewatering Max. density of compact wet cake: 1.3kg/dm3 at max. 4200rpm Bowl Maximum main speed:4200rpm Bowl diameter: 360mm DNF unit - upper tank - PPM 200CE - A Knsdpfx Ajzb N Hhjfkea DNF unit - upper tank - PPM 200CE - B 4x filter for Mn removal 3x reverse osmosis (RO) skid 3x powder activated carbon (PAC) dosing unit - Rittal JB 2x DNF unit - poseipump unit 3x unit blower ES145/5P-RVP300-spec 6x front filter Mn removal 2x DNF unit - recirculation pipe Spare parts can be seen in the asset list upon request. Please note pictures are representative and not of actual items Note: Sales are conditional upon the satisfactory completion within 24 hours of conditional sale of a Business Partner Due Diligence Check (BPDDC) and an End User Statement for (EUS) by the buyer, and, if the buyer is not the end user, for each end user.

Condition: like new (used), Year of construction: 2026, operating hours: 5 h, functionality: fully functional, machine/vehicle number: Op aanvraag, For Sale: Smipack BP802AS Bundling Machine – As New Due to an incorrect purchase, we are offering this Smipack BP802AS bundling machine for sale. The machine is in brand-new condition and has never been used in production. It was professionally installed and tested only, but has never been put into commercial operation. The machine is in perfect working order, with no defects or damage. Key Specifications: Capacity: Up to 25 cycles per minute Brand-new condition – immediately available Never used in production Fully installed and ready for operation Knedpfjzrgimsx Afksa We are selling this machine solely because we have decided to purchase a larger model with additional features to better suit our production requirements. This is purely a change in our production needs and not due to any technical issues. 💰 Price: Open to reasonable offers. For more information, additional photos, technical specifications, or to arrange an inspection, please feel free to contact us.

Condition: used, Year of construction: 1977, Mobile excavator Manufacturer: Liebherr Type: A 921 C Year of manufacture: 1977 Weight / operating weight: approx. 18,000 kg Transport length: approx. 8.50 – 9.00 m Transport width: approx. 2.48 – 2.50 m Height (above cab): approx. 3.15 – 3.20 m Kjdpfjzrzymsx Afksna Engine & Drive Engine type: Deutz F6L 912 (air-cooled 6-cylinder naturally aspirated diesel engine) Power: approx. 100 – 106 hp (70 – 78 kW) at 2,300 rpm Displacement: 5.6 liters (5,652 cm³) Cooling system: Air cooling (very low maintenance, ideal for cold starts) Maximum speed: approx. 20 km/h (Hydrostatic drive with stepped control) Hydraulics & Working Equipment Hydraulic system: Hydromatik axial piston pumps with performance-controlled total control Hydraulic oil tank capacity: approx. 270 liters Diesel tank capacity: approx. 228 liters Standard bucket volume: approx. 0.60 – 1.00 m³ 5826

Condition: like new (used), Year of construction: 2004, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2011-004, pressure (max.): 80 bar, operating pressure: 80 bar, coolant tank capacity: 900 l, Like-new, compact filter system INTERLIT SPB 4/900, high-pressure system with 40/80 bar pumps, switchable pressure stage with a polishing filter, communication via Profibus with the machine. Knodszva Hyepfx Afkea

Condition: good (used), Year of construction: 2014, Warehouse offices, room-in-room system, approx. 39 m² – used: Price ex works: €5,950 (net), disassembled, packed and loaded! Item no. 9: Manufacturer: Kleusberg Kedezqzxtspfx Afkona Type: Systemraum Trendline Year of manufacture: unknown, probably 2014 Walkable roof with a maximum load capacity of 100 kg Element width: approx. 1.03 m Length: approx. 9.30 m (9 elements) Depth approx.: 4.25 m (4 elements) Height: approx. 2.96 m 1x door All offices are closed on three sides and are therefore positioned with one side against the hall wall Includes lighting, etc., as available Without flooring Sale without furniture, etc. Condition: good Available: from approx. Q4/2026 Location: Hamburg

Condition: good (used), Year of construction: 2014, Warehouse offices, room-in-room system, approx. 19 m2 – used: Price ex-location: €2,950.00 (net), dismantled, packed, and loaded! Item 10: Manufacturer: Kleusberg Knedpfezqzw Ajx Afkoa Type: Systemraum Trendline Year of manufacture: unknown, presumably 2014 Walkable roof with a maximum load capacity of 100 kg Element width: approx. 1.03 m Length: approx. 5.24 m (5 elements) Depth approx.: 3.64 m (3 elements and 1 narrow element) Height: approx. 2.96 m 1 door All offices are enclosed on three sides and are therefore positioned with one side against the hall wall. Includes lighting, etc., as available. Without flooring. Sale without furniture, etc. Condition: good Available: from approx. Q4/2026 Location: Hamburg

Condition: good (used), Year of construction: 2016, Technografica printing plate baking line, 1550 mm, year of manufacture 2016, plate developing machine, manufacturer Techno-Grafica, type TPP9001M, year of manufacture 2002, 2 transfer tables, manufacturer Techno-Grafica, model CTA1550, year of manufacture 2002, baking oven, manufacturer Techno-Grafica, model EBO1550, year of manufacture 2002, degumming unit, manufacturer Techno-Grafica, model SPG1550, year of manufacture 2006, plate stacker, manufacturer Techno-Grafica, model PSTHS1550. Knsdpfxszr Haxo Afkoa

Year of construction: 2022, condition: used, 2022 | Sika AL-264 Sika | Used Small Equipment 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 29500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 3 inspection points 3 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Knsdpfx Afezpaliskoa Concrete sprayer with 7 pallets of Roiter hoses 10 bar , machine could not be tested 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40936 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Year of construction: 2021, condition: used, 2021 | Sika AL-264 LMT | Used Small Equipment 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 29500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Knsdpfozpalcox Afksa 👷‍♂️ Inspected by an independent expert 1 inspection points 1 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Concrete blaster 13m3/H , not operationally tested machine looks as it is in working condition 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40944 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, Minipack Replay 35 Kodpfox Tr Igjx Afkena The Minipack Replay 35 EVO is a manual hood shrink wrap machine designed for small production volumes where space is limited. Manual tabletop shrink wrapping machine Power supply: 230 V, single-phase (optionally 120 V) Installed power: 2.0 kW (230 V) / 2.25 kW (120 V) Maximum current: 8.6 A (230 V) / 19 A (120 V) Sealing bar usable dimensions: 380 × 250 mm Maximum product dimensions: 350 × 240 × 140 mm Maximum film roll dimensions: Ø 200 × 350 mm Machine dimensions (closed): 935 × 620 × 540 mm Machine dimensions (open): 935 × 620 × 540 mm Machine weight (net/gross): 49 / 63 kg

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, MINIPACK REPLAY 40 EVO Knjdpjx Tqf Dsfx Afkoa The Minipack Replay 40 EVO is a mobile, manual shrink film packaging machine with hood, ideal for small to medium batch sizes. ▢ Mobile, manual shrink film packaging machine with hood ▢ Output up to 300 units per hour ▢ Usable sealing bar dimensions: 420 × 280 mm ▢ Max. product dimensions: 400 × 250 × 160 mm ▢ Max. film roll size: Ø 250 × 500 mm ▢ Working table height: 925 mm ▢ Machine dimensions (closed): 1,160 × 700 × 1,120 mm ▢ Machine dimensions (open): 1,160 × 700 × 1,220 mm ▢ Machine weight (net/gross): 90 / 111 kg

Condition: used, Year of construction: 2018, machine/vehicle number: 1800603, total length: 2,485 mm, total height: 1,715 mm, total width: 1,245 mm, product height (max.): 240 mm, product length (max.): 600 mm, product width (max.): 400 mm, input voltage: 230 V, input current: 13 A, working height: 870 mm, width of welding knife: 600 mm, length of welding knife: 400 mm, passage height: 240 mm, overall weight: 763 kg, passage width: 400 mm, power: 3 kW (4.08 HP), film width: 700 mm, input frequency: 50 Hz, nominal power: 3 kW (4.08 HP), year of last overhaul: 2025, Equipment: documentation/manual, IMPORTANT NOTE – KNOWN WEAR AND TEAR: A conveyor belt (infeed/outfeed belt, part no. 400201) is worn. A quote from the authorized service partner for €879.59 net for materials and labor is available. Alternatively, the replacement can be carried out independently. We will provide the repair quote to interested parties upon request. Minipack-Torre Pratika 56 MPE X1 – fully automatic L-bar sealer, year of manufacture 2018, serial no. 1800603. Sold directly from the end user. Fully automatic machine for shrink and film packaging. Schneider-Electric Magelis touchscreen with 256 storable recipes for format, temperature, and speed. SPECIFICATIONS - Output up to 3,600 units per hour - Sealing bar 600 × 400 mm - Product height up to 240 mm - Films: Polyolefin/PVC/OPP, 7–80 µ - Film roll up to Ø 300 × 700 mm - 230 V single-phase, 3 kW; no three-phase power or compressed air required - L × W × H: 2,485 × 1,245 × 1,715 mm - Weight: 763 kg - Schneider brushless servo drive, PLC logic, emergency stop and safety features CONDITION AND MAINTENANCE Optically in very good condition. Lifetime counter: 36,415 packages, indicating moderate use. In May 2025, the sealing wire, upper and lower rubber seals, and Teflon tape were replaced. Maintenance and repair documentation is available. Due to the aforementioned conveyor belt, the handover will be in the described as-is condition; inspection and functional testing are expressly desired. SCOPE OF DELIVERY - Machine with glass hood, Magelis touchscreen, safety features, and connection cable - At least one suitable film roll with a width of 600 mm - Possibly another partial roll; the exact inventory will be checked before handover - Machine on four swivel casters Kjdpfx Afey Stuxekena - Original documents, including data sheet, order confirmation, and available maintenance and service correspondence LOCATION, TRANSPORT, AND HANDOVER Location: 18239 Satow, Mecklenburg-Vorpommern. Inspection and functional testing are possible by appointment. The buyer organizes and pays for collection or transport. If desired, we will assist in organizing a suitable freight or courier transport. Due to the weight of 763 kg, a suitable special pallet and packaging are required; the transport costs will be added to the purchase price. PRICE AND SALE - Offer price: €8,360 net plus statutory VAT - Commercial sale by Marko Strehk Einzelunternehmen - Known wear and tear are fully listed above - The machine can be inspected and tested before handover - In the case of an intra-community delivery, the tax requirements and evidence will be checked in advance If you are interested, we will gladly send you the repair quote and the available documents.

Condition: ready for operation (used), functionality: fully functional, mileage: 37,457 km, power: 55 kW (74.78 HP), first registration: 09/2016, overall weight: 3,500 kg, fuel type: diesel, color: orange, axle configuration: 4x4, empty load weight: 1,950 kg, next inspection (TÜV): 02/2027, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, operating hours: 4,738 h, Equipment: air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 as a winter service vehicle From first owner = former municipal/government vehicle Major engine inspection including timing belt, water pump, oil, oil filter, and fuel filter was carried out at 37,454 in 08/2026 Ksdpfjzrrvxex Afkjna 2,584 hydraulic operating hours 4,738 total operating hours 37,457 kilometers Including Kif front sweeper, type CM 1600, 1,300 mm wide, manufactured in 2019 (as new/never used in snow) Including Gmeiner salt spreader, type Husky 500V FS, manufactured in 2019 (as new/used twice for testing) 4x4 all-wheel drive – hydrostatic all-wheel drive Rear view camera Wheelbase 1,600 mm Track width 1,055 mm Fresh water tank 180 liters Unladen weight approx. 1,950 kg Permissible total weight 3,500 kg Length: 4,016 mm / Width: 1,210 mm / Height: 1,970 mm (without attachments) Driving speed 0-40 km/h Working speed 0-24 km/h Noise reduction package Working speeds selectable 1,600 - 2,400 rpm (ECO/Standard/MAX) Engine: water-cooled 4-cylinder VW industrial diesel engine Low emissions, Euro 5 Fuel tank approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics Circuit 1 (front) 0–50/0–70 l/min 225 bar Circuit 2 (rear) 0–20/25/30 l/min 195 bar Hydraulic service brake via foot pedal Cab with air-suspended driver's seat Air conditioning/heating Water treatment system Fire hydrant connection Dosing system Permissible total weight: 3500 kg Unladen weight: 1950 kg The spreader is driven and operated by the machine's hydraulics. Other applications are possible through additional attachments from HAKO, such as sweepers, snow plows, and lawnmowers (not included in the scope of supply) Errors, changes, and prior sale are subject to change. We sell exclusively according to our general terms and conditions and with the exclusion of any warranty. Errors, changes, and prior sale are subject to change. We are available for you continuously from Monday to Friday from 9:00 a.m. to 5:00 p.m., on Saturdays by prior appointment, and telephone appointments can be arranged outside of these opening hours. We will gladly accept your existing used equipment/vehicle in part exchange. Sales to commercial businesses and exporters will be given priority, and this applies to our entire vehicle inventory. The above information is non-binding, and errors/changes and prior sale are subject to change!

Condition: ready for operation (used), functionality: fully functional, mileage: 37,457 km, power: 55 kW (74.78 HP), first registration: 09/2016, overall weight: 3,500 kg, fuel type: diesel, color: orange, axle configuration: 4x4, empty load weight: 1,950 kg, next inspection (TÜV): 02/2027, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, operating hours: 4,738 h, Equipment: air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 as a winter service vehicle From first owner = former municipal/government vehicle Major engine inspection including timing belt, water pump, oil, oil filter, and fuel filter was carried out at 37,454 in 08/2026 2,584 hydraulic operating hours 4,738 total operating hours 37,457 kilometers Including Kif front sweeper, type CM 1600, 1,300 mm wide, manufactured in 2019 (as new/never used in snow) Including Gmeiner salt spreader, type Husky 500V FS, manufactured in 2019 (as new/used twice for testing) 4x4 all-wheel drive – hydrostatic all-wheel drive Rear view camera Wheelbase 1,600 mm Track width 1,055 mm Fresh water tank 180 liters Unladen weight approx. 1,950 kg Permissible total weight 3,500 kg Length: 4,016 mm / Width: 1,210 mm / Height: 1,970 mm (without attachments) Driving speed 0-40 km/h Working speed 0-24 km/h Noise reduction package Working speeds selectable 1,600 - 2,400 rpm (ECO/Standard/MAX) Engine: water-cooled 4-cylinder VW industrial diesel engine Low emissions, Euro 5 Fuel tank approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics Circuit 1 (front) 0–50/0–70 l/min 225 bar Circuit 2 (rear) 0–20/25/30 l/min 195 bar Hydraulic service brake via foot pedal Cab with air-suspended driver's seat Air conditioning/heating Water treatment system Fire hydrant connection Dosing system Permissible total weight: 3500 kg Unladen weight: 1950 kg Knodpfxozrruzo Afkoa The spreader is driven and operated by the machine's hydraulics. Other applications are possible through additional attachments from HAKO, such as sweepers, snow plows, and lawnmowers (not included in the scope of supply) Errors, changes, and prior sale are subject to change. We sell exclusively according to our general terms and conditions and with the exclusion of any warranty. Errors, changes, and prior sale are subject to change. We are available for you continuously from Monday to Friday from 9:00 a.m. to 5:00 p.m., on Saturdays by prior appointment, and telephone appointments can be arranged outside of these opening hours. We will gladly accept your existing used equipment/vehicle in part exchange. Sales to commercial businesses and exporters will be given priority, and this applies to our entire vehicle inventory. The above information is non-binding, and errors/changes and prior sale are subject to change!

Condition: repair required (used), Year of construction: 1990, functionality: not functional, machine/vehicle number: 778 02, type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, overall weight: 5,500 kg, We are offering this ESSA - Meyer CAM1-120 powder coating system, manufactured in 1990, which requires repair. Manufacturer: ESSA, CH-2555 Brügg Nominal force: 1200 kN Speed: min⁻¹ Knjdpfx Afozunlbekja Travel distance A: 300 mm Travel distance B: 180 mm Supply voltage Us: 3×380 V~ Control voltage Uc: 24/220 V DC/AC Frequency f: 50 Hz Serial number SE: 2281 Factory number: 778 02 Year of manufacture: 1990 Weight: 5500 kg • The A-cylinder needs to be overhauled. • The control system is defective. IMPORTANT: The buyer will be responsible for dismantling the system in consultation with Kyocera Fineceramics Europe GmbH. The system is currently installed in a production environment. All costs associated with removal/dismantling will be borne by the buyer. In addition, the machine is sold as is, with no warranty. If you have any questions or require further information, please do not hesitate to contact us.

Condition: good (used), Machinery from honey processing factory. DC Norris hotrooms, DC Norris settling tanks, DC Norris holding tanks, crystallised tanks, super seed tanks, pump, filter sets, various filling lines to fill squeezy bottles, glass jars and plastic buckets. Ksdpfx Ajpcibmofkona