Used Collet for sale (831)

Condition: ready for operation (used), Year of construction: 2007, operating hours: 9,000 h, overall weight: 6,100 kg, This 3-axis MORI SEIKI NL2500Y/700 was manufactured in 2007. It features a Mori Seiki Mapps IV control, a main spindle speed of 4000 rpm, and a milling drive speed of 6000 rpm. The machine includes a 12-station turret BMT50, NC tailstock, and a KNOLL high-pressure system at 70 bar. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NL2500Y/700 machine we have for sale. Contact us for more information. • Control: Mapps IV • Rated Power: 41 kVA • Supply Voltage: 3 ~ 200 V / 50 Hz • Workpiece unloading with tray • Various collet chucks Ø40/Ø60/Ø80 • Kitagawa 3-jaw chuck • 12-station turret BMT50 • NC Tailstock • Integrated measuring arm for tool measurement Hedpjx Utwfjfx Ag Eofb • Enclosed safety enclosure • KNOLL high-pressure system 70 bar & chip conveyor • Milling drive speed 6000 rpm • Main Spindle Speed: 4000 rpm

Condition: good (used), Year of construction: 2005, Daewoo Puma TT 2000SY Twin Turret Turning Centre with Fanuc 18i-TB CNC Control With Hydrafeed Multifeed MX-1B Short Magazine Automatic Bar Feed. Swing Over Bed 800mm. Swing Over Saddle 620mm. Max Turning on Upper Turret Ø390mm. Max Turning on Lower Turret Ø300mm. Max Working Length 350mm. Max Bar Ø65mm. 'X1' Axis Travel 255mm, 'X2' Axis Travel 190mm. 'Z1' Axis Travel 800mm, 'Z2' Axis Travel 900mm. 'Y' Axis Travel 120mm (+ or - 60mm). 'B' Axis 810mm. 'C' Axis 360°. (1) Kitagawa BB08 Power Chuck Ø210. (1) CRS66 Power Collet Chuck, Gripping Range 4mm-66mm. Main Spindle Nose A2 No.6 with Ø76mm Through Hole & Ø66mm Bore of Draw Tube & Max Speed of 5,000RPM. Twin Turret each with (12) Tool Stations. Tool Size 25mm x 25mm, Boring Bar Size Ø40mm & Spindle Speeds 4,000RPM. LNS Turbo 62878680E Swarf Conveyor (2005). Puma S/No. PT 20SY0047. Hydrafeed Multifeed MX-1B Automatic Bar Feed. Approx Ø3 - Ø80mm x 1,250mm Long Bar Range with Hydrafeed Controller, S/No. 202618. Hodpfx Agsx H Thbs Esfb Includes Probe Arm, Signal Tower, (2) Machine Lights & (2) KF-101P Foot Switches. Dimensions of Turning Centre Approx 4,100mm x 2,300mm x 2,600mm High, Weight Approx 11,600kg. Please note: Filtermist FX 4000 XCEL 2 Oil Mist Filter Extraction is not included with the machine.

Condition: good (used), Year of construction: 2008, 400mm swing, 220mm max diameter, 490mm between Centres, Siemens 828 Control, Hsdox Dk Azjpfx Ag Esfb 52mm bar capacity, 12 station VDI30 turret, 14.7kW Spindle Motor, Spindle Speed 5000rpm, collet chuck, low volt light, coolant, Tool setter, Tailstock, swarf conveyor, Barfeed.

Condition: good (used), Technical data: Travel paths: Longitudinal X-axis: 762 mm Cross Y-axis: 305 mm Vertical Z-axis: 406 mm Quill travel: 127 mm Spindle mount: collet chuck Table size: 1067 x 229 mm Speed range: 50–3750 rpm in two steps Weight: 1000 kg Equipment: - SONY digital readout, 2 axes (X and Y-axis) - Machine lamp - Drill chuck 0–13 mm - Collet system - Machine vice, jaw width 150 mm - Safety guard, electrically secured, type ZE-FS 30-300, fully mounted - Documentation Hodpfxew Ebhme Ag Eefb Condition: good, workshop-tested

Condition: good (used), Multi-spindle head, multi-spindle drilling head, drilling gearbox -Multi-spindle head -Number: max. 2x drill bits/milling cutters -largest hole pattern spacing: 42 mm -Top opening: Ø 45 mm Hfedpjb T Ti Eefx Ag Eob -Built-in collets: Ø 16 mm -Multi-spindle heads are variable tools -for various machining operations such as drilling, thread cutting, countersinking, reaming, -with which multiple holes can be machined at once -Dimensions: 120/110/H220 mm -Weight: 5.6 kg

Condition: excellent (used), machine/vehicle number: 77WSX22305E5A-135, BENZ - MONO WSX 05 - 90° angle head Mounting: HSK-A100 Collet: ER25-A (clamping range: 0.5–16 mm) Max. torque: 30 Nm Max. speed: 8,000 min⁻¹ Transmission ratio: 1:1 Angle head: 360° adjustable Weight: approx. 8 kg Hjdex Tdhxjpfx Ag Eefb The angle head was used on a MAG HÜLLER HILLE - NBH6+ but can also be adapted or fitted to other machines.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 17,050 h, travel distance X-axis: 670 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 600 mm, overall weight: 20,000 kg, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis POSmill H 800 U was manufactured in 2012. It features a Heidenhain iTNC 530 control, a new spindle with 5,700 hours since 2021, and a robust 18,000 rpm spindle speed. The machine offers extensive travel with dimensions of 670/830/600 mm and supports 96 tool positions. Additional features include an internal coolant supply at 60 bar, a comprehensive coolant system, and a chip conveyor. Consider the opportunity to buy this POSmill H 800 U universal machining centre. Contact us for more information. Additional equipment • new spindle since 2021: only 5700 spindle hours (Wear-related spindle replacement) • Inspection under power possible Machine Benefits Technical Machine Benefits Hfjdpfsx D Dx Ajx Ag Ejb • Through-spindle air flow • Internal coolant supply: 60 bar • Coolant system with 1000l paper belt filter • Rotating viewing window • Chip flushing gun // bed flushing • Oil mist extraction • Blum tool breakage/measurement • Heidenhain 3d touch probe • Mobile electronic handwheel • Kinematics package Extra Information Spindle replacement due to wear (new spindle: 5600 hours since 2021) Production Hours: Control on: approximately 33300 hours, Spindle on: 17050 hours (new spindle 5600 hours, replaced in 2021 due to wear) Tool Positions: 96 Includes tool holders (shrink-fit chucks, collets, etc.)

Condition: used, Year of construction: 2007, turning diameter 42 / 140 mm turning length 170 mm control Mitsubishi Meldas turning speeds 80-8.000 U/min c-axis 0,001° turret (x-stations) 2x 12 (VDI 20) angetrieben turning speeds 45-4.500 U/min spindle 1 kW gripping station 42 mm turning speeds 60-6.000 U/min c-axis 0,001° number of controlled axis 8 collet unit 48 DIN 6343 . Number of working hours 10769 h chip conveyor ja/yes Bj. 2018 total power requirement 7,5 / 11 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 2,4 x 1,6 x 2,2 m CNC turning and milling machine CITIZEN BOLEY BE 42, year 2007 Simultaneous working with 7 axes on main and pick-up spindle very good condition, operating hours 21.999h (September 2024) Accessories: # Various tool holders: Hedpjvyli Eofx Ag Eofb 5x axiale driven tool holder # collet chuck for collets type 173E # additional coolant cooler # Knoll chip conveyor, year of construction 2018 The Boley BE 42 is without barloader. Loading magazine interface has been fitted. Complete battery exchange on 22.12.2025

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: B3170-0054, turning length: 700 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 290 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 24 m/min, total height: 2,200 mm, total length: 5,000 mm, total width: 2,000 mm, quill diameter: 100 mm, overall weight: 7,000 kg, controller manufacturer: FANUC, controller model: SERIES 21i-TB, number of slots in tool magazine: 12, HYUNDAI - KIA SKT 250 M CNC Lathe - Operating voltage: 200/220 V - Frequency: 50/60 Hz - Rated current: 89 A - Connection: 27 kVA Hfsdpfx Aox T Ac Uog Eob - Max. machining diameter: 410 mm - Max. swing diameter over cross slide: 480 mm - Chuck size: 254 mm - Spindle bore: 95 mm - C-axis: 0.001° - Includes tailstock, a HAINBUCH collet chuck, a 12-station tool turret with live tooling, and a chip conveyor Attention: The item must be collected by binding agreement between 18 and 26 February 2026, on a date to be coordinated. FCA D-78087 Mönchweiler – loaded onto truck

Condition: reconditioned (used), Year of construction: 2006, CNC Lathe GILDEMEISTER CTX 420 linear Equipped with Siemens 840 D powerline control Year of manufacture: 2006 Max. turning diameter: 324 mm Max. turning length: 600 mm Max. swing diameter: 680 mm Spindle bore: 79 mm Max. spindle speed: 4,500 rpm Including the following accessories: Sliding guard with interior lighting 12-position turret with 12 driven stations Y-axis, C-axis Hedpfx Aexzt Dcog Esfb Tool measuring device Parts catcher 3-jaw hydraulic chuck 210 mm with foot switch Hainbuch hydraulic collet chuck IRCO Breuning RBK 10012 bar feeder Signal lamp Tailstock with quill Chip conveyor Oil mist extraction Coolant system with high-pressure coolant (IKZ) and belt filter unit Operating manuals

Condition: good (used), Collet holder, tool holder, tool holder, milling holder, milling tool -Milling holder: SK50 2 pieces -Type: different versions see photos -Milling tool holder: M16 -Price/delivery: complete -Total dimensions: 190/100/H260 mm -Total weight: 6.3 kg Hfodpfohupupox Ag Eeb

Condition: ready for operation (used), Year of construction: 2016, operating hours: 14,063 h, spindle speed (max.): 7,000 rpm, spindle motor power: 11,000 W, number of axes: 6, This 6-axis Biglia B.436-Y2 horizontal turning machine was manufactured in 2016. It features a maximum bar diameter of 36 mm, spindle speed up to 7000 rpm, and motor power of 11 kW. With rapid traverse rates up to 30 m/min and a comprehensive toolset including high-precision boring bar holders and radial drilling heads, this machine offers robust capabilities for complex machining tasks. If you are looking to get high-quality turning capabilities consider the Biglia B.436-Y2 machine we have for sale. Contact us for more information. • Max. bar diameter: 36 mm • Aiming tube: 37.5 mm • Spindle nose: 115 mm • Draw tube: 46 mm • Continuous motor power: 7.5 kW • Continuous power available from: 1700 rpm • Max. torque: 62 Nm • Cylinder thrust area: 75 cm² • Cylinder stroke (max.) for clamping operation: 26 mm • Longitudinal slide (Z1 axis) • Max. stroke: 300 mm • Ball screw diameter/pitch: 25/10 mm • Max. rapid traverse: 30 m/min • Cross slide (X1 axis) • Max. stroke: 85 mm • Ball screw diameter/pitch: 25/5 mm • Max. rapid traverse: 15 m/min • Vertical slide (Y1 axis) • Max. stroke: 50 (+25/-25) mm • Ball screw diameter/pitch: 25/5 mm • Max. rapid traverse: 15 m/min • Longitudinal slide (Z2 axis) • Max. stroke: 300 mm • Ball screw diameter/pitch: 25/10 mm • Max. rapid traverse: 30 m/min • Cross slide (X2 axis) Hjdpfxjx D Ep Ne Ag Eofb • Max. stroke: 85 mm • Ball screw diameter/pitch: 25/5 mm • Max. rapid traverse: 15 m/min • Vertical slide (Y2 axis) • Max. stroke: 50 (+25/-25) mm • Ball screw diameter/pitch: 25/5 mm • Max. rapid traverse: 15 m/min • Connected load: 11 kW / 40 kVA / 70 A / 3 x 400 V • Operating pressure: 4.8–6.9 bar • Max. air consumption (supply): 0.10 m³/min (guideline) • Footprint (with chip conveyor) L x D approx.: 3682 x 1430 mm • Overall height (max.): 1900 mm Additional equipment • High-precision boring bar holder Ø25 mm with internal coolant (Oesterle) • Precision reducing sleeve D=25/16 (Oesterle) • Precision reducing sleeve D=25/12 (Oesterle) • Precision reducing sleeve D=25/06 (Oesterle) • Collet chuck ER20, shank D=25 mm (Oesterle) • Precision parting-off holder for parting tool SH26 mm, left-hand, height 70 mm • Radial drilling and milling head ER20 with internal coolant, 1:1, 6000 rpm (MT) • Radial drilling and milling head ER20 with internal coolant, 1:2, 12,000 rpm (MT) • External turning tool holder, 1st side 16x16 / 0088-00004 (Oesterle) • Angled external turning tool holder, 2nd side 16x16 / 0088-00006 (Oesterle) • High-pressure pump 40 bar with replaceable filter cartridge • Coolant gun including its own pump • Collet chuckThe machine ran with cooling lubricant! Brand: Castrol Type: Hysol MB 50The tension of the main and counter spindle is hydraulic and adjustable by pressure! A collet chuck with stroke limitation is mounted on the counter spindle! The tool presetting is a measuring probe that is only used to measure the tools! It also functions properly! The cooling lubricant pressure is 7 bar and can be increased to a maximum of 40 bar via M code! The workpiece removal is permanently installed in the machine and can be freely programmed! The bar loading magazine is included! According to the operating instructions, the bar loader can handle 1500 mm

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: M303004, turning length: 780 mm, total height: 2,700 mm, total length: 5,000 mm, total width: 2,700 mm, overall weight: 12,000 kg, controller manufacturer: FANUC, controller model: SERIES 18 i-TB, NAKAMURA-TOME WT-300 CNC Lathe - Operating voltage: 200/220 V - Frequency: 50/60 Hz - Main circuit breaker: 300 A - Transformer: 93.4 kVA - Max. diameter (upper side): 199 mm - Max. diameter (lower side): 270 mm - Distance between spindle heads: max. 1100 mm / min. 250 mm - Max. bar capacity: 102 mm (left side), 65 mm (right side) - Chuck size (left side): 305 mm, (right side): 210 mm - Turret force (X-axis) X1: 11,000 N, X2: 11,000 N - Turret force (Z-axis) Z1: 9,000 N, Z2: 6,000 N - Turret force (Y-axis): 6,000 N - Travel X1: 152 mm, X2: 195 mm - Travel Z1 + Z2: 780 mm Hedpfx Agox Tzp To Eefb - Y-axis travel: ±40 mm - B2 axis travel: 850 mm - Spindle speed: 2,500 rpm - Spindle bore: 120 mm - Front bearing inner diameter: 160 mm - Draw tube bore: 103 mm - Spindle center height: 1,228 mm - Spindle speed R: 4,500 rpm - Spindle bore: 80 mm - Front bearing inner diameter: 110 mm - Draw tube bore: 66 mm - Spindle support: 2-point - C-axis - Rapid traverse speed: 600 rpm - Cutting feed rate: 1 - 4,800 °/min - Upper turret: 12-station turret - Number of tool stations: 24 - Number of turret indexing positions: 24 - Turret outer diameter: 406 mm - Turret thickness: 100 mm - Tool clearance: 641 mm - Turret clamping force: 30 kN - Tool dimensions: 20 and 25 mm - Internal turning tool mounting bore diameter: 25/32 mm - Lower turret type: 24-station turret - Turret outer diameter: 365 mm - Turret thickness: 100 mm - Tool clearance: 600 mm - Tool dimensions: 20/25 mm - Driven tool spindles on upper and lower turrets - Spindle speed: 3,600 rpm - Number of spindle speed ranges: stepless - Number of tool positions: 12 - Toolholder types and sizes: longitudinal holder: 20, transverse holder - Thread cutting holder (longitudinal): M3 - M10 - Thread cutting holder (transverse): M3 - M10 - Cutting and feed speeds X1 and X2: 16,000 mm/min - Cutting and feed speeds Z1 and Z2: 27,000 mm/min - Cutting and feed speed B2 axis: 27,000 mm/min - Cutting and feed speed Y-axis: 6,000 mm/min - Feed rate X1 and X2: 1 - 4,800 mm/min - Feed rate Z1 and Z2 axis: 1 - 4,800 mm/min - Feed rate B-axis: 1 - 4,800 mm/min - Feed rate Y-axis: 1 - 4,800 mm/min - Including the tool holders visible in the photos as well as two HAINBUCH collet chucks in the main and counter spindle - Also includes chip conveyor and transformer - With documentation Note: The item must be collected by firm appointment between 18 and 26 February 2026, exact date to be agreed in advance. FCA D-78087 Mönchweiler – loaded onto truck

Condition: good (used), Thread cutting head, thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment -Manufacturer: PCM, tapping collet -Type: ET1-40 -Size: Ø12 mm -Dimensions: Ø40 x 52 mm -Weight: 0.3 kg Hjdpfx Aewzhgneg Ejfb

Condition: ready for operation (used), Year of construction: 2013, operating hours: 12,981 h, overall weight: 6,200 kg, This 3-axis DMG MORI NLX 2500Y/700 was manufactured in 2013. It features a main spindle speed of 4000 rpm, a spindle bore of 80 mm, and a 20-station turret BMT40. The machine includes a KNOLL high-pressure system (70 bar) and a chip conveyor. Consider the opportunity to buy this DMG MORI NLX 2500Y/700 horizontal turning machine. Contact us for more information about this machine. • Rated Power: 30 kVA • Milling Drive Speed: 10000 rpm • Workpiece unloading with tray onto conveyor belt Hfedpfxsx Tv Tye Ag Eob • 20-station turret BMT40 • NC tailstock • Integrated measuring arm for tool measurement • Includes KNOLL high-pressure system (70 bar) & chip conveyor • Various SMW Ø40/Ø60/Ø80 collet chuck • Main Spindle Speed: 4000 rpm • Spindle Bore: 80 mm • Enclosed safety enclosure

Condition: good (used), Year of construction: 1984, Multi-spindle head, multi-spindle drilling head, drilling gearbox -Multi-spindle drill head with: drive -Drive geared motor SEW Eurodrive type: RF40DT80K4B -Power: 0.55 kW -Speed: 165 rpm Hfodpfx Agjdz A Tre Esb -max. x: drill bit -4x built-in drill bits Collet: mm -Drilling pattern can be adjusted -Dimensions: 1115/150/H300 mm -Weight: 55 kg

Condition: good (used), Year of construction: 1984, Multi-spindle head, multi-spindle drilling head, drilling gearbox -Multi-spindle drill head with: drive -Drive geared motor SEW Eurodrive type: RF40DT80K4B -Power: 0.55 kW -Speed: 165 rpm -max. x: drill bit Hedpodz A Tpsfx Ag Eofb -4x built-in drill bits Collet: mm -Drilling pattern can be adjusted -Dimensions: 1115/150/H300 mm -Weight: 55 kg

Condition: good (used), Quick-change chuck, quick-change holder, quick-change head, keyless drill holder, milling holder, quick-change insert, collet chuck, reducing sleeves, clip-on holder -Quick change chuck: Mounting: MK3 / 32 mm -Dimensions: see photos -Quantity: 14 pieces available -Price per piece -Dimensions: Ø 62 x 175 mm -Weight: 1.2 kg/piece Hodporvldxofx Ag Eofb

Condition: good (used), Thread cutting chuck, thread chuck, tap chuck Hodpfxsc S D H Is Ag Ejfb -Handover in its current condition as inspected -Thread cutting chuck without collets -with slip clutch -Cutting capacity: M24-M64 -Recording: MK5 -Quantity: 1x threading chuck available -Weight: 13 kg

Condition: good (used), Multi-spindle head, multi-spindle drilling head, drilling gear -Manufacturer: Perske, multi-spindle drilling head with drive -Drilling head: 18 spindles -Drill spacing: 32 mm -Stroke: 50 mm -Drive: DSB 1306/2 1.8 kW 2800 rpm -Collets: Ø10 mm -Number: 2x multi-spindle drilling head with drive available Hfsdpevmw H Asfx Ag Eob -Price: per piece -Dimensions total: 800/200/H575 mm -Weight: 67 kg/piece

Condition: good (used), Collet chuck, tool holder, tool holder, milling chuck, milling tool -Milling chuck: SK50 2 pieces -Tool holder: Ø 32/16 mm -Price/Sale: complete -Overall dimensions: 355/180/100 mm -Total weight: 10.4 kg Hedpfx Aegkw Etog Eefb

Condition: good (used), Quick-release clamping device, quick-release clamp, drilling device, drill bushings -Drilling jig: as a quick-clamping device for flat material -Transport box: incl. -Drill sleeves: Ø 12 mm, spacing 100 mm -Dimensions: 1900/150/H60 mm -Transport box: 2040/225/H280 mm Hfjdpfxsgw Ilrj Ag Eeb -Weight: 70 kg

Condition: good (used), Quick-change chuck, quick-change holder, quick-change head, quick-release drill chuck, milling chuck, quick-change insert, collet chuck, reducing sleeves, mounting bracket Hedpfx Agohh Tkto Eofb -Quick-change chuck: Mount: MK4 / 32 mm -Measurements: see photos -Dimensions: Ø 72 x 210 mm -Weight: 2.1 kg

Condition: good (used), Collet holder, tool holder, tool holder, milling holder, milling tool, short-shaft system -Manufacturer: DEPO, milling mount SK50 -Type: 100 5 77 -Milling tool holder: conical, Ø 34/24 mm M16 -Dimension total Ø97x385mm -Weight: 5.9 kg Hfodshupulepfx Ag Eob

Condition: good (used), Tailstock for lathe, counter bearing for dividing head, dividing head -from: Schaublin 102 Hodpfxjd Riw Ho Ag Eefb -Collet chuck: W25 -Drawing: in the photos -Dimensions: 450/360/H170 mm -Weight: 11 kg