Used Cnc Toolroom Milling Machine for sale (84,270)

Condition: used, CNC tool milling machine MAHO type MH 400 E Machine No. 43072 Year of construction 1989 travel X: 400 mm Y: 250 mm Z: 375 mm table size 700 x 270 mm distance spindle nose / table max. 410 mm tool holder ISO 40 with draw pin type B spindle speed 80 - 4000 rpm. 18 steps feed speed 1-1500 mm/min. infinitely variable Rapid traverse (X, Z and Y) 2,5 m/min. Pinol shift vertical 50 mm spindle drive 2,2 kW mains connection 400 Volt, 50 Hz, 19 kVA - swivelling control panel with CNC path control PHILIPS 432 - LCD monitor VISCOTECH - hydro-mechanical tool clamping - swiveling device for the vertical milling head - Splash guard cabin as table enclosure with 3 folding doors - Electrical control cabinet fixed to the machine - Interface V24 (RS 232) for data transmission - 52470 operating hours, main switch on - rigid angular table - coolant unit with coolant pump adjacent under the machine - central oil lubrication Vogel - operator's manual, electrical circuit diagram space requirement L x W x H 2250 x 1800 x 1850 mm weight approx. 1,5 ton. Iodpfsh Ic Ufox Ag Doa good condition

Year of construction: 1992, condition: ready for operation (used), X-axis: 560mm, Y-axis: 500mm, Z-axis: 400mm, clamping table dimensions vertical: 300/450mm, number of threaded holes: 2/6, threaded hole spacing: 45mm, thread: M16, angle table clamping surface: 460/800mm, number of T-slots: 7, T-slot spacing: 63mm, T-slot width: 14mm, max. workpiece weight (recommended): 350kg. Milling spindle drive number of working spindle speeds: 21, speed (geometrically graduated): 40-4000/min, step increment: 1.259, spindle motor power: 3.3/4kW, tool holder: ISO 40 / M16 with draw-in groove, vertical quill stroke: 90mm, feed in all 3 axes steplessly adjustable: 2-3000mm/min, rapid traverse X-axis and Y-axis: 6000mm/min, rapid traverse Z-axis: 4000mm/min, feed motor torque longitudinal and transverse: each 3.5Nm, feed motor torque vertical: 7Nm, control: Heidenhain TNC 407, connected load: 8.7kW, length: 3705mm, width: 2430mm, height: 3100mm, weight of the machine with vertical milling head and angle table: 2410kg, weight of the crate base: 170kg, weight of the transport crate: 400kg, operating hours: 18,924h. Accessories: 3D probe, 20x tool holders, splash guard cabin, coolant pump, work light, handwheel, machine documentation. An on-site inspection is possible. Iedpexcxz Nefx Ag Dea

Condition: used, Year of construction: 1997, feed length X-axis: 900 mm, feed length Y-axis: 450 mm, feed length Z-axis: 400 mm, X/Y/Z travels: 900/450/400 mm Table area: 1120x400 mm Max. table load: 600 kg Spindle taper: ISO 50 Iedextaxdjpfx Ag Doa Total power input: 20 kVA Machine overall dimensions (LxWxH): 2560 x 3280 x 3355 mm Machine total weight: 4550 kg Control system: Heidenhain TNC 415 Machine incl. the following accessories: 4th axis, vice, toolholder, collets, probe, manuals

Condition: used, Year of construction: 1999, x-travel 2000 mm Ijdpfx Asv H Ertsg Dsa y-travel 800 mm z-travel 850 mm control HEIDENHAIN TNC 360 total power requirement / kW weight of the machine ca. / t required space / m

Condition: good (used), Vertical milling machine Toolroom type Haas TM-1P, year 2020 Iodpfx Agow Snzrs Dea

Condition: like new (used), Year of construction: 2023, operating hours: 27 h, functionality: fully functional, machine/vehicle number: PA8050V3, feed length X-axis: 800 mm, feed length Y-axis: 480 mm, feed length Z-axis: 200 mm, travel distance X-axis: 800 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 200 mm, feed rate X-axis: 9 m/min, feed rate Y-axis: 9 m/min, feed rate Z-axis: 9 m/min, spindle speed (max.): 24,000 rpm, spindle speed (min.): 24,000 rpm, rapid traverse X-axis: 24,000 m/min, table width: 800 mm, table height: 500 mm, type of input current: three-phase, total height: 1,800 mm, total length: 1,250 mm, total width: 1,050 mm, overall weight: 120 kg, CNC milling machine for metal and wood processing including extraction system, computer, and CondaCam OEM full version Iedpfsxbqtbox Ag Dja

Condition: used, Machine has a defect in the main spindle CNC vertical machining center CHIRON type FZ 22 L high speed Machining center with CNC control FANUC Series 21-M serial no. 179-98 year of construction 1999 Travel X: 2000 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Table load 525 kg (per meter) Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Tapping capacity M27 Tool diameter 75 mm Diameter with free secondary positions 105 mm Tool change speed tool - tool 2.0 sec. Tool change speed from chip to chip 4.8 sec. Distance spindle nose - table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Mains connection 400 Volt, 50 Hz, 32 kVA - Pendulum machining over 2 work areas (partition wall missing) - CNC control FANUC Series 21-M - Tool changer 40-fold - IKZ = internal coolant supply through the spindle - Spray protection cabin with sliding door Iedpfx Agequhbgj Dea - Indirect measuring system - Coolant device with chip conveyor opposite - Electronic handwheel Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Weight of the machine approx. 7.5 tons. Transport space requirement on the truck L x W x H 12000 x 2470 x 2950 mm Transport Weight on the truck approx. 10 ton. Weight 7.2 tons. good condition - machine has a defect on the main spindle

Year of construction: 2009, condition: ready for operation (used), A Lasercomb CNC high-speed die milling machine is available. Travel X/Y: 1070mm/1070mm, number of spindles: 4, spindle speed: 50000rpm, continuous power: 180W. Dimensions X/Y: approx. 2100mm/1900mm, weight: approx. 430kg. Documentation available. An on-site inspection is possible. Ijdexbrxrepfx Ag Dea

Condition: good (used), Year of construction: 1990, 1 used well preserved CNC controlled tool milling machine as travelling column version with CNC path control GRUNDIG Dialog 11 table size 1600 x 675 mm tool holder SK / ISO 40 traverse X-axis, longitudinal 1200 mm Y-axis, cross 600 mm Isdjhhuf Hspfx Ag Dsa Z-axis, vertical 500 mm table load 2000 kg speed range 20 - 6300 rpm feed range, stepless 2 - 10.000 mm/min rapid traverse in all axes 10 m/min quill stroke 80 mm Drive power 100 % ED 7.5 kW 40 % ED 12 kW Machine dimensions L x W x H 3600 x 3000 x 2300 mm Machine weight 6800 kg Control cabinet dimensions L x W x H 1700 x 900 x 1750 mm Switch cabinet weight 470 kg Accessories / Special features: - CNC tool milling machine suitable for tool, jig and fixture making, training as well as mold making. - CNC path control GRUNDIG Dialog 11 - Screen graphics, dialog guided input, 3 D linear interpolation, circular interpolation, helical interpolation, polar coordinate input, numerous drilling and milling cycles, cycle input graphically supported, milling cycles "contour pocket" for automatic free milling of irregular pockets also with islands, shift and rotation of the coordinate system - Electronic handwheel - Interface RS 232 - Swiveling vertical milling head +/- 90 - Hydraulic tool clamping, DIN 2080 with clamping groove, Ott system - Spindle sleeve adjustment 80 mm - Horizontal milling device - Full protection cabin - Ball screw spindles in all 3-axes - Coolant system - Bele

Condition: ready for operation (used), Technical characteristics Designed for conventional drilling and milling processes, as well as copying operations on extruded aluminum profiles and other materials, including steel profiles up to 3 mm thick, steel-reinforced PVC 3-axis movement/machining Useful X travel: 4000 mm Usable Y travel: 360 mm Useful travel in Z: 295 mm 8-position tool loader 5 workpiece clamps PC control panel Power and Motors Iodsundhropfx Ag Dea Voltage: 380 V Pluging: Three-phased Overall dimensions

Condition: good (used), travel distance X-axis: 745 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 300 mm, Bridgeport milling machine Iodpfxsqgcdte Ag Dea Type: Interact 4 Control: Heidenhain TNC 155 X-path: 745 mm Y-path: 370 mm Z-path: 300 mm Bed: 960 x 380 mm Spindle: ISO 40 Dimensions: 185x180x235 cm LxWxH

Condition: used, machine/vehicle number: 152.00.80.20, Universal machining center, CNC tool milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine Iodpfxsfbma Ns Ag Dea -function tested -Clamping table: 800 x 445 mm -Travel: X/Y/Z 500/500/385 mm -Spindle holder: SK40 -quill stroke: 90 mm -Speeds from: 31.5 to 3150 rpm -Coolant device -Dimensions: 1475/1770/H2000 mm -Weight: 1966 kg

Condition: used, CNC Milling Machine DECKEL Type FP 3 A Tool-tool milling machine with handwheels, also for conventional operation Serial No. 2206 - Built in 1982 GRUNDIG CNC 2101 CNC control system Travel paths X: 490 mm, Y: 300 mm, Z: 340 mm Table size 705 x 425 mm Spindle mount SK 40 Quill stroke 100 mm Spindle speed 25 - 2500 rpm, 21 steps Feed rate 5 - 500 mm/min, continuously variable Rapid traverse speed 1200 mm/min Spindle motor power: 2/4 kW, pole-changing Power supply: 380 V, 50 Hz - GRUNDIG CNC 2101 CNC control system - Mechanical handwheels for all three axes - Universal tilt-and-turn table - Vertical milling head tilts and is manually adjustable by 200 mm - Hydro-mechanical tool clamping - Coolant system in the machine base - Protective enclosure at the front and sides with three hinged doors - Control cabinet adjacent (L x W = 600 x 430 mm) Space requirement: L x W x H: 1900 x 1700 x 1950 mm Iodpev R E Rdjfx Ag Dea Weight: 1700 kg (machine 1540 kg + electrical cabinet 160 kg) Very good condition

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, A used CNC portal milling machine with carousel turning unit / C-axis for turning Hirth gearing TRAVEL PATHS X: 3,000 mm Y: 2,500 mm Z: 1,000 mm Table diameter: 2,000 mm Max. turning diameter: 2,500 mm Max. turning height: 1,000 mm Machine: Uniport 6000 Iodpfevvh T Sex Ag Dsa Boring work, also CNC turning, CNC milling and angle head machining. All in one clamping, combined with the speed and precision of a CNC portal milling machine. C-axis for turning New price: €1.8 million Dismantling: by arrangement The machine comes with a protective cover so that no chips get into the Hirth gearing on the slide during milling. Then the rotary attachment head for the turning tools and an angle head for lateral machining on the plate field or on the rotary table. You can swivel this by 2.5° each time over the Hirth gearing. All holders (milling, turning, angle head) are clamped via HSK-100. A radio measuring probe from M&H (Hexagon) for measuring and probing the zero point is included with the machine. The machine is in operation and can be viewed on site. A video of the machine is available.

Condition: good (used), Year of construction: 1988, CNC milling machine MAHO Type: MH 500 W Year 1988 Heidenhain TNC 232 B control. With counter bearing for horizontal milling. Iedpfxeich Eho Ag Dsa Spindle mounting: ISO 40 spindle speed stepless 20 - 4000 rpm feeds : 1-3000 mm / min Travels : X 500 mm Y380 mm Z 350mm Table : 700 mm X 350 mm Weight.ca.2000kg. Machine documentation available Machine is ready for demonstration.

Condition: good (used), BHG Hermle CNC milling machine Iedoqwgzbepfx Ag Dja Type: UWF 1000 Control: Heidenhain TNC 355 X-path: 700 mm Y-path: 550 mm Z-path: 500 mm Bed: 490 x 1000 mm Spindle: ISO 40 Speed: 3150 rpm Year of manufacture: 1988 Including documentation and parameters Dimensions: 230x200x220 cm LxWxH Weight: approx. 4000 KG

Condition: used, Horizontal machining center with 2-fold shuttle table STEINEL type BFZ 5 with CNC control SIEMENS Sinumerik 810 M serial no. 34 year of construction 1988 Travel X: 500 mm, Y: 400 mm, Z: 320 mm Clamping surface, table surface 500 x 400 mm Tool holder ISO 40 Ijdpfx Aoutuyieg Dja Spindle speed max. 6300 rpm infinitely variable Main spindle drive 12 kW Mains connection 380 Volt, 50 Hz, 30 kVA - Tool changer with 24 tool positions - Changing table with 2 stations - Interface for data transfer - Coolant unit with chip conveyor Space requirement L x W x H 4100 x 2500 x 2650 mm Weight approx. 8 tons good condition Transport dimensions: Machine L x W x H 3200 x 2500 x 2650 mm, approx. 7.5 tons. Chip conveyor L x W x H 3500 x 1100 x 2100 mm, approx. 600 kg

Condition: ready for operation (used), 1 used CNC bed milling machine with Heidenhain control system. Ijdpfxewxxzqj Ag Dsa Rotary table included. Further technical data will be added.

Year of construction: 1990, condition: good (used), CNC milling machine Fab.TOS type: FGS40CNC Control Haidenhein TNC 355 BJ. 1990 Procedures: X1000mm Y500mm Z500mm Iodpjdtfhqsfx Ag Dea Spindle retainer: ISO 50.

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W Iedpfsu Tln Nox Ag Dja VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Year of construction: 2001, condition: good (used), CNC bed type milling machine Fabr.IBERIMEX-MVR Type: UH-1250 BJ. 2001 Control HEIDENHAIN TNC124 Procedures: X1250mm Y500mm 460 mm Clamping table: 360mmX1800mm Spindle retainer: ISO50 Machine with full enclosure. Machine card see more data. Ijdpsd Eranefx Ag Doa Machine in good condition.

Condition: used, As-new CNC Vertical Machining Center, Milling Machine VMC, BAZ, HSC Milling, Machining Center TAIKAN B540Z Serial No. 1171009 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Travel range for working area X: 488 mm, Y: 400 mm, Z: 230 mm X-axis travel for tool change position X: 540 mm Table size 520 x 400 mm Spindle taper ISO 25 Distance spindle nose - table 165 - 395 mm Max. spindle speed 36,000 rpm, infinitely variable Feed rate 0 to 10,000 mm/min Rapid traverse 15 m/min Table load capacity 200 kg Max. tool length 120 mm Max. tool diameter 80 mm Max. tool weight 0.8 kg Tool change time approx. 10 sec. Axis drives 0.8 kW each Spindle drive 3.5 kW at 100% duty cycle Electrical connection 400 Volt, 50 Hz, 7.5 kW CNC path control SIEMENS Sinumerik 828 D Basic - Software: NCU V04.05+SP06+HF01 - Interfaces: LAN, USB and CF-Card - Measuring system for tool setting: METROL tool sensor - Vertical milling spindle = high-frequency spindle with liquid cooling and external recooling unit - Tool changer with 13 tool stations - Electronic handwheel - Coolant system - Protective enclosure with sliding door - Central lubrication - incl. 10 tool holders ISO 25 with ER20 collet chuck and a set of collets Transport dimensions (L x W x H): 1800 x 1500 x 2300 mm Weight: 2,900 kg Iedpfx Agow Ed U No Dja Excellent condition – as new Machine comes from a showroom with very few operating hours.

Condition: good (used), Year of construction: 1986, CNC universal milling machine DECKEL Type: FP5NC Year 1986 Control DIALOG 4 Ijdpfx Aedtdaheg Dja Only spare parts Please ask what you need.

Year of construction: 1988, condition: good (used), CNC universal console milling machine Fabr.KLOPP Type:FWS15 Bj.88 CNC contouring control Heidenhain TNC 155. Travel:X1170mm Y:420mm Z:420mm Aufspanntisch:1500X400mm Spindle mounting:SK50 Spindle power:15KW Spindle speed:35-3550rpm Counter bearing for horizontal milling, cooling device, spittoon, Various tool holders, Complete machine documentation. Machine immediately ready for use Iedpfx Aobu Em Asg Dja Workshop tested. New parameters and batteries on 20.08.2020 Installed. Good general condition. Machine can be run under current.

Year of construction: 1993, condition: good (used), CNC universal milling machine DMG MORI Type: MH 600 C Control MAHO 532 year 1993. with automatic swivel milling head G17/G18 and B -axis rotary table. Without tool changer. Further data see data sheet. Complete machine documentation and data backup available. Good general condition. Iodpeiihxhofx Ag Dsa