Used Cnc Toolroom Milling Machine for sale (83,961)

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,400 mm, travel distance Z-axis: 1,500 mm, table length: 6,000 mm, table width: 3,000 mm, spindle speed (min.): 3,000 rpm, A CNC portal milling machine FKD-Feichter with double column is available. Travel range X/Y/Z/W: 6000mm/4800mm/1500mm/1300mm, table dimensions X/Y/Z: 6000mm/3000mm, max. workpiece weight: 115,000kg, max. table load: 6,400kg/m², total machine bed length: 14,500mm, portal dimensions X/Y: 3,000mm/4,400mm, C-axis: 360°, A-axis: +/-120°, ram section: 700mm/700mm, feed rate: 10m/min. Total system dimensions X/Y/Z: approx. 15,100mm/6,100mm/7,000mm, total system weight: approx. 115,000kg, control system: Heidenhain. Includes chip guard, coolant system, and hydraulic unit. The machine was built at the site in 2022. The ram and spindle have been freshly overhauled. Documentation is available. On-site inspection is possible. Immediately available. Ijdpfjxp Rgksx Ag Doa Three heads: Fork milling head with A-axis, 90-degree angular head, spindle extension – straight head, tool holder SK 50.

Condition: used, machine/vehicle number: 186137200089, used TOS tool milling machine model FNG 40 CNC Year of manufacture: 1988 with Heidenhain path control TNC 155 with fixed angular table 800x400mm Travel paths: X/Y/Z = 500/400/400mm Speed range: 10-3150 rpm Spindle: SK40 Chip guard, attachable Documentation for the machine and control is available. The machine is located in 71334 Waiblingen-Beinstein and can be inspected by appointment. Iedpfx Aexf Inkog Dja

Condition: like new (used), Year of construction: 2022, XYZ RMX 3500 CNC control: ProtoTrak Table size: 1,370 x 355 mm X-axis travel: 750 mm Y-axis travel: 480 mm Z-axis travel: 510 mm Spindle speed: 5,000 rpm Programmable variable spindle speed TRAKing® Hardened and ground guideways Ijdpsxm Twasfx Ag Dja 3-axis digital readout Precision ground ball screws Coolant pump Pneumatic tool clamping / Air Power Drawbar Work light Automatic lubrication CE enclosure The machine is practically new, barely used.

Year of construction: 2025, condition: new, Demo machine Year of manufacture: 2025 Travel range: 2500x1300x200mm Machine frame in 19mm Forescolour, consisting of milling table (X-axis), gantry (Y-axis), Z-axis unit in compact board, and base frame with adjustable machine feet. Milling bed as sacrificial board in 19mm MDF. Table openings longitudinally and transversely pre-configured. Mechanical set consisting of profile rails including profile rail carriages, ball screw and precision rack gears. All components assembled, pre-lubricated including test run, immediately ready for operation. Ijdpfx Asxc Rmqjg Dsa Control set consisting of control cables, energy chains, planetary gears, stepper motors, high-performance drivers, power supply and toroidal transformer, all preinstalled in the control cabinet, as well as sensors for each axis. Control relay for automatic actuation of the existing extraction system. Brush seals for dust protection and protective equipment compliant with CE regulations: includes moving extraction unit and one-sided mounted laser scanner for work area monitoring, with 275° and 5.5m field range. (Machine positioned in a room corner) Manual control panel equipped with all necessary machine functions, including emergency stop and dead man’s switch. Tool length sensor for determining tool length and active offset of the reference point. High-frequency spindle with 2.2 kW, incl. clamping nut, frequency inverter, power filter, breaking resistor, and collet set. Built-in monitor, incl. mini PC with Windows 11, control software Beamicon2, mouse and keyboard, pre-installed in an ergonomic console. CAD license Rhino 8.0 and CAM license Estlcam V12, as well as all necessary documentation, will be sent by email prior to delivery. Includes milling bed designed as a vacuum table, consisting of four individually controllable segments. Cross table made of PE with top layer in MDF. Becker vacuum pump with a capacity of 100m³/h, oil-lubricated. A 16 Amp, 400 V AC plug is required for the vacuum pump electrical connection. The customer must provide HDF 3mm raw on both sides for the whole vacuum table (2500x1300mm) as a sacrificial board. (Recommended application: machining of coated wood-based panels) Includes 10-piece tool set consisting of: 3 pcs. 5 mm Z2 (HF52REVHM) 6 pcs. 4 mm Z1 (HF41REVHM) 1 pc. 5mm Z3 (HF53SRECAR) (Tool selection can be adapted as needed) Includes maintenance package in systainer: - 150 ml grease gun - 400 g cartridge high-performance grease - 500 ml can of silicone spray grease - Grease nipple incl. hose and 30mm face mill with indexable inserts Availability: short notice Location: Flörsheim

Year of construction: 1990, condition: excellent (used), machine/vehicle number: VH-7360, a used well-preserved CNC bed type milling machine with HEIDENHAIN control, HURON-head, hydraulic Werkzeugklemmumg,. Coolant system, central lubrication system, lighting, TFT - monitor new. Traverse path x/Y / Z 1600/ 800 / 650 mm Spindle retainer for SK 50 Spindelderhzahl 60-1800U/min Working feed 10-3000 mm / min Rapid traverse 10 m / min Table size 1800x610mm Machine weight 9500 kg Ijdpjdzy Uysfx Ag Dsa Table load: 3000 kg

Condition: excellent (used), Year of construction: 2007, Control: Heidenhain iTNC 530 Ijdpfx Agsxd Tgis Doa Table Clamping surface: 1200 x 450 mm T-slots: 6 x 18 H7 mm Maximum load: 400 kg Feeds Longitudinal travel: 650 mm Cross travel: 480 mm Vertical travel: 475 mm Feed (X, Y, Z): Infinitely variable Rapid traverse X,Y: 6000 mm/min Rapid traverse Z: 4000 mm/min Feed motor AC (Z): 4.0 (10.5) Nm Spindle Speed range: 55 – 4000 rpm Speed control: Frequency controlled, stepless Spindle taper: ISO 40 Spindle power: 7.5 kW Spindle swivel: ± 90° Spindle stroke: 140 mm Weight Net weight: 2100 kg Gross weight: 2300 kg

Condition: ready for operation (used), A self-built CNC milling machine by Klein GmbH is available. Travel X/Y/Z: 980mm/415mm/90mm, machine dimensions X/Y/Z: approx. 2200mm/1550mm/3000mm. An on-site inspection is possible. Isdpfoxnz Uvjx Ag Dja

Condition: used, CNC Tool Milling Machine MIKRON Type WF 40C/3M with Heidenhain TNC 310 CNC path control Machine No. 440911 Year approx. 1985, overhauled and control retrofit in 11/2000 Travel distances X: 600 mm Y: 600 mm Z: 460 mm Table size 900 x 550 mm Spindle taper ISO 40 Distance spindle nose - table max. 520 mm Spindle speed 31.5 - 3150 rpm, 21 steps Feed rate 1 - 2000 mm/min. Rapid traverse speed X and Y = 5000 mm/min; Z = 4000 mm/min Quill stroke 100 mm Main spindle drive 4 and 5 kW Power connection 400 Volt, 50 Hz, 10.5 kW, 25 Amp. - CNC path control Heidenhain TNC 310, NC software: 286140 07, PLC software: MIKR1 - Spindle speed via 21 gear steps - Vertical milling head swivels left and right - Hydro-mechanical tool clamping vertical and horizontal - Central lubrication - Electronic handwheel - 62,815 operating hours shown Iodpew A Af Ijfx Ag Dja - Control cabinet permanently attached to the machine rear - Coolant system integrated in the machine base - Swiveling operator panel - Electrical diagram, control manual available Space requirement L x W x H 2300 x 2000 x 2150 mm Weight 2900 kg Good condition

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 6,612 mm, travel distance Y-axis: 5,645 mm, travel distance Z-axis: 1,250 mm, table length: 7,000 mm, table width: 2,500 mm, spindle speed (max.): 4,500 rpm, distance between stands: 3,800 mm, Technical Data • Table clamping surface: 7,000 × 2,500 mm • X-axis (longitudinal travel): 6,000 + 612 mm • Y-axis (cross travel): 4,670 + 975 mm • Z-axis (vertical travel): 1,250 mm • W-axis (vertical travel): 1,200 mm • Distance between uprights: 3,800 mm • Distance table surface – spindle nose: 2,015 mm • Drive power AC motor: 60 kW • Spindle speed, 2-step, digital spindle drive: 60 – 4,500 rpm • Feed rate in CNC operation (rapid traverse): up to 10,000 mm/min • X-axis: 20,000 mm/min • Y- and Z-axis each: 25,000 mm/min • C-axis rotary table: ±180° • 45° milling head rotation: 360° Main components of the machine • Heidenhain path control iTNC 530 with 15" monitor • Tool changer with 60 positions • Rotary table for operation with multiple milling heads and automatic milling head change, consisting of collet system for holding various milling heads, quick couplings for hydraulic, coolant, and power supply, as well as the corresponding electrical safety switches • Centering of the milling heads on the rotary table using Hirth face toothing (on the mounting plate and respective milling head) • 2 x milling heads: straight-head adaptor (direct spindle), automatic 45° milling head • Crossbeam motorized traversable (for positioning only) • Operator platforms: 2 operator platforms with protective enclosure and integrated control panel, traveling along X-axis, each with 2 doors Iedpfjxgr Epsx Ag Dsa • Chip conveyor on both sides of the table plus a transverse conveyor • X-axis longitudinal and Y-axis cross drive by rack and pinion with 2 servomotors (play-free electronic pre-tensioning, master-slave principle) • Z-axis vertical adjustment by ballscrew (Ø 80) with preloaded double nut • Zayer guideway system made of inlaid or bolted, hardened steel strips • All axes equipped with INA roller recirculating shoes on each track surface • Counter-guides on all axes with additional polymer coating for optimal damping • Anchoring and leveling elements • The machine complies with the currently applicable EC directives The above information is taken from the machine documentation. The seller assumes no liability for completeness or accuracy. The decisive factors are the actual technical data and functions of the machine.

Condition: good (used), For sale: very well-maintained machine from a training workshop CNC Universal Milling Machine MAHO Type MH 400 E Machine No. 42544 Year of manufacture: 1989 Travel X: 400 mm, Y: 250 mm, Z: 375 mm Table size: 700 x 270 mm Ijdpfx Asw A Rateg Doa Distance spindle nose / table max.: 410 mm Tool holder: ISO 40 with drawbar Type B Spindle speed: 80 - 4000 rpm, 18 steps Feed rate: 1-1500 mm/min, stepless Rapid traverse (X, Z, and Y): 2.5 m/min Vertical quill travel: 50 mm Spindle drive: 2.2 kW Power supply: 400 Volt, 50 Hz, 19 kVA - Swiveling control panel with CNC path control PHILIPS 432 - LCD monitor VISCOTECH - Hydro-mechanical tool clamping - Swing-out device for vertical milling head - Splash guard enclosure around the table with 3 folding doors - Electrical control cabinet fixed to the machine - V24 interface (RS 232) for data transfer - 52,470 operating hours, main switch on - Rigid angle table - Coolant system with coolant pump mounted next to the machine - Central lubrication system Vogel - Operator manual, electrical wiring diagram Kedbheh Ic Ufsh Nzgjlw Space requirements (L x W x H): 2250 x 1800 x 1850 mm Weight: approx. 1.5 tons Good condition

Condition: good (used), TECHNICAL DATA • CNC: Heidenhain TNC 430 • Table surface: 7,100 x 1,200 mm • Longitudinal travel (X axis): 7,000 mm • Cross travel (Y axis): 1,500 mm • Vertical travel (Z axis): 1,500 + 500 mm • Rapid traverse (axes): 20,000 mm/min • Maximum working feed: 10,000 mm/min • Automatic head with 1º / 1º indexing: Included • Spindle taper: SK-50 • Spindle speed range: 20 – 3,500 rpm • Number of speed ranges: 2 • Main motor power: 50 kW • Automatic tool changer: Included • Tool changer positions: 60 • Internal coolant supply: Included • Swarf/chip conveyor: Included • Electronic handwheel: Included Iedpsxqq Rrjfx Ag Doa • Additional tank with paper filter: Included • Operator platform: Included • Guarding with 4 sliding doors: Included • Permissible load on table: 30,000 kg • Machine weight: 45,000 kg

Condition: good (used), Year of construction: 2017, feed length X-axis: 550 mm, feed length Y-axis: 305 mm, feed length Z-axis: 460 mm, CNC x-axis 550 mm y-axis 305 mm z-axis 460 mm BT 40 tool holder 12-position tool changer Main spindle 4 kW up to 10,000 rpm with cooling system Chip conveyor Isdpfxoxpqhze Ag Dsa Siemens Sinumerik 808 D control

Condition: used, For sale: the tool milling machine shown in the photos, manufactured by the German company Deckel, model FP3A. The machine offers manual, semi-automatic, and automatic operation modes. Controlled via G-codes. Control type: CNC 2102 Deckel. Isdpfsxluu Rex Ag Doa

Condition: used, CNC universal tool milling machine HERMLE type UWF 900 E Machine No. 10829, Year of manufacture 1995 CNC contouring control Heidenhain TNC 415 B NC software 280540, PLC software 277677 06 Travel paths X: 600 mm, Y: 400 mm, Z: 400 mm Table size 900 x 458 mm Spindle mount ISO 40 Distance table to spindle nose 40 to 440 mm Spindle speed 20 - 4000 rpm, continuously variable Feed rate 1 to 3000 mm/min Rapid traverse X and Y = 7 m/min. Z = 6 m/min. Spindle drive 7 kW Quill stroke (vertical head) 60 mm - Spindle speed via 2 gear stages and continuously variable via frequency converter - Hydro-mechanical tool clamping vertically and horizontally - Thread cutting without compensating chuck - Electronic handwheel - RENISHAW 3D scanning head - Coolant system adjacent, capacity approx. 130 liters - Automatic central lubrication system - Fixed angle table Ijdpfx Aswaaqiog Doa - Fully protective cabin - 32,279 recorded spindle operating hours - Pivoting control panel - Operating instructions and electrical diagram Space requirements L x W x H 2700 x 3500 x 2100 mm Weight 3 tons.

Condition: good (used), Year of construction: 1987, Available immediately from location. CNC control: Heidenhain TNC 155 Iedpowazwkefx Ag Dea X travel: 600 mm Y travel: 200 mm Z travel: 150 mm Max. workpiece weight: 300 kg Table clamping area: 800 x 300 mm Table height: 800 mm Spindle speeds: continuously variable 40-2000 rpm Drive power: 4 kW Infinitely variable feed rates in all directions Dimensions (L x W x H): 2200 x 2700 x 2400 mm Approx. weight: 2000 kg

Condition: ready for operation (used), Year of construction: 2013, Emco emcomat FB-600 CNC milling machine in Nieuwstraat! Iedpfxexc H H Hs Ag Dja

Year of construction: 1988, condition: used, table mounting size: 650 x 1600 mm movement x: 1250 mm movement y: 800 mm movement z: 620 mm spindle taper: ISA 50 Isdpoxnq Iofx Ag Dea spindle turning speed range: 5 - 2000 rpm carriages continuously adjustable: 5 - 3000 mm/min rapid move: 10 m/min space needed: 3850 x 3000 x 3200 mm weight: 11100 kg FIDIA-control ADDENDUM V 05-E CNC 12 Only 8577 hours on-time!

Condition: ready for operation (used), Year of construction: 1999, General Data Measurements height 2860 mm Machine weight 3800 kg Control Unit Brand MITSUBISHI Main Drive Spindle speed range 12000 rpm Spindle motor power 7.5/5.5 kW Tool taper 7/24, No. 40 Movement Iedpfx Agexpytae Doa X-Axis Movement 510 mm Y-Axis Movement 510 mm Z-Axis Movement 510 mm Table Number of tslots 5 Table load 350 kg Tools Number of index 25 Max weight 6 kg Max tool diameter 100 mm Max tool length 250 mm Media Power consumption 22.5 kVA Additional Equipment APC (Automatic Pallet Changer) - Only for CV-500A (APC): Number of Pallets: 2 Pallet Change Method: Front rotation This 3-axis MORI SEIKI CV-500 was manufactured in 1999. Ideal for precision CNC milling, this machine maintains robust construction and reliable performance. If you are looking to get high-quality milling capabilities, consider the MORI SEIKI CV-500 machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, CNC Milling Machine ABENE Type VHF-360TI serial no. 36084 year of construction 2008 CNC control HEIDENHAIN TNC 320 Travel X: 650 mm, Y: 510 mm, Z: 450 mm Table size 1200 x 400 mm Spindle holder SK 40 Spindle speed 55 - 3000 rpm. 2 steps Feed speed 30 - 4000 mm/min. infinitely variable Rapid traverse speed (X + Y-axis) 4000 mm/min. Rapid traverse speed (Z-axis) 2000 mm/min. Spindle nose-to-table distance 20-495 mm Motor power spindle drive 7.5 kW Mains connection 400 Volt, 50 Hz - CNC contouring control HEIDENHAIN TNC 320 with RS232, USB and LAN interfaces - Electronic handwheel - mechanical handwheels for X and Y axis - Spindle speed manually switchable with 2 gear stages (stage 1 = 55-700 rpm) + (stage 2 = 701-3000 rpm) - Inclined bed concept with laterally mounted swivel spindle head +/- 50° - Manual inclined bed adjustment via hand crank - Hydro-mechanical tool clamping - Automatic central lubrication - Coolant system with electric cooling lubricant pump opposite - Machine light - Switch cabinet permanently attached to the machine - Operating hours of control unit on = 14780 hours - Read operating hours machine on = 12980 hrs. - Read operating hours program run = 400 hrs. Space requirement L x W x H 2600 x 2000 x 2000 mm Iedpfety A Ehsx Ag Dea Weight 2500 kg Very good condition

Year of construction: 1989, condition: used, machine/vehicle number: 2204-1736, table mounting size: 460 x 800 mm movement x: 485 mm movement y: 385 mm movement z: 380 mm tailstock stroke: von Hand ca. 70 mm spindle turning speed range: 50 - 3150 rpm carriages continuously adjustable: 2 - 1000 mm/min Ijdpfx Agjclli Uo Dea rapid move: 2 m/min electrical connection: 3,7/4,4 kW space needed: 2100 x 1650 x 1730 mm weight: 1850 kg

Year of construction: 1990, condition: used, machine/vehicle number: 90030003, table size: 500 x 1200 mm movement x: 1000 mm movement y: 550 mm movement z: 600 mm spindle taper: ISO 40 Iedpfo Npwfex Ag Dsa spindle turning speed range: 60 - 2700 rpm spindle drive: 10 kW electrical connection: 380 V, 20 kVA kW space needed: 3200 x 2800 x 2650 mm weight: 7,3 t

Year of construction: 1983, condition: ready for operation (used), machine/vehicle number: 2810-3076, table mounting size: movement x: 560 mm movement y: 450 mm movement z: 450 mm tailstock stroke: 80 mm spindle taper:SK 40 spindle turning speed range: 40 - 4000 rpm Iodpfofnry Hsx Ag Dsa carriages continuously adjustable: 2 - 2000 mm/min rapid move: 4 m/min space needed: 2000 x 2150 x 2030 mm weight: 2720 kg

Year of construction: 1987, condition: used, machine/vehicle number: 63658, movement x: 600 mm movement y: 400 mm movement z: 400 mm Iedebv Haaepfx Ag Doa spindle taper: ISO 40 spindle turning speed range: 80 - 4000 rpm carriages continuously adjustable: 0,1 - 1500 mm/min rapid move: x u. y/z 4/2,5 m/min electrical connection: 380 V, 16 kVA kW space needed: 2450 x 2200 x 1900 mm weight: 2250 kg

Year of construction: 1988, condition: used, machine/vehicle number: 82053, table mounting size: 600 x 1100 mm movement x: 800 mm movement y: 450 mm movement z: 500 mm tailstock stroke: von Hand ca. 50 mm Ijdjxnp Dopfx Ag Dsa spindle turning speed range: 63 - 3150 rpm carriages continuously adjustable: 0,1 - 1500 mm/min rapid move: x/y/z 4,5/2,6/3 m/min electrical connection: 380 V, 5,5 kW space needed: 3000 x 2500 x 2030 mm weight: ca. 4000 kg control 432 with graphic

Year of construction: 1987, condition: used, machine/vehicle number: 152.41.74.002, table mounting size: 500 x 1000 mm movement x: 630 mm movement y: 500 mm movement z: 460 mm Ijdps H I Hdofx Ag Dsa tailstock stroke: von Hand 45 mm spindle taper: ISA 40 spindle turning speed range: 31,5 - 3150 rpm carriages continuously adjustable: 1 - 3000 mm/min rapid move: x/y 6 / z 4 m/min electrical connection: 380 V, 6/8 kW space needed: 1800 x 2120/2600 x 2020 mm weight: 3100 kg control: HEIDENHAIN, TNC 155