Used Cnc Machining Center for sale (70,395)

Year of construction: 2012, condition: excellent (used), YASDA YBM Vi40 CNC jig boring machine / machining center machine in perfect condition incl. accessories (see photos) For the complete photo gallery: See attached PDF file (from page 4) TECHNICAL DATA Travels X-axis: 900 mm Y axis: 500 mm Z axis: 450 mm Distance from the table surface to the spindle tip: 100 to 550 °. Rotary table diameter: 400 mm Pallet loading capacity: 200 kg Table surface configuration: 44-M12 thread C axis: 360 ° Table tilt axis movement range (B axis): +- 110 ° Distance between center of tilt axis and rotary table: 0 mm Rotary axis (C axis): 100 rpm Max. rotation of the inclination axis: 20 rpm Motor for rotary axis: 4,2 kW Motor for inclination axis: 4,5 kW Spindle type: SA40-24`000-18,5 Spindle speed range: 100 - 24`000 rpm Spindle speed range programming: Programming by direct input of a 5-digit S-command Number of spindle speed ranges: 1 Type of spindle conical bore: HSK-63A Inner diameter of spindle bearing: 65 mm diameter Rapid traverse Speed: X,Y,Z axis: 20`000 rpm Feed rate: X,Y,Z axis: Max. 5000 rpm C-axis: 100 rpm B axis: 20 rpm Smallest input increment: 0.0001 mm/deg Automatic tool changer: 60 tools Selection method: Any selection Tool shank type: HSK-63 A Gbjdepqx H Tspfx Aiksw Max. tool diameter Tool diameter: 100 mm Max. tool diameter Tool diameter at full setting: 70 mm Max. Tool length: 250 mm Max. Tool weight: 7 kg Tool balance weight: within G2.5 Machine dimensions: 3220 x 3885 x 3515 mm Machine weight: 15`000 kg No responsibility is taken for the accuracy, completeness and timeliness of the information.

Condition: ready for operation (used), Travel X/Y/Z: 700mm/400mm/300mm, table dimensions X/Y: 650mm/400mm, max. table load: 350kg, spindle mount: BT30, speed: 12000rpm, power: 5.5kW, torque: 82.7Nm. Rapid traverse: 50m/min, feed: 50m/min, tool positions: 21, tool diameter: 75mm, tool length: 210mm, tool weight: 3kg. Machine dimensions X/Y/Z: approx. 2550mm/1450mm/2900mm, control: Fanuc 0iMF. Documentation available. On-site inspection is possible. Gbjdpfx Asv H Dhgsikew

Condition: used, CNC machining center Gbjdpsz Inkbefx Aiksw Manufacturer: SCM Type: Morbidelli Author 430S Year of manufacture: 2006 Technical data - Working area: 1300x3600x180 mm - Equipped with milling spindle, drilling unit, and saw - Horizontal machining units - Original SCM software - The machine is in good working condition. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: new, MASTERWOOD CNC Machining Center Type MVD 900 - Edition Partnership - Showroom Machine Through-feed processing, Ball screw drives on all axes, Network card for remote maintenance, Integrated control cabinet, Saw unit for grooving in the X direction, Pick-up tool changer, Automatic central lubrication, Sensor for panel measurement ----- Technical Data ----- Min. workpiece length X: 250 mm Min. workpiece length Y: 80 mm Min. workpiece thickness: 10 mm Max. workpiece length X: unlimited mm Max. workpiece length Y: 990 mm Godpfxeyrhcps Aikebw Max. workpiece thickness: 60 mm Main spindle motor power: 4.5 kW Main spindle speed: 1,000 - 18,000 rpm Main spindle taper: ISO 30 Number of vertical drilling spindles: 20 Saw blade diameter of saw unit: 125 mm Number of tools in changer: 6 Extraction connection diameter: 100 + 100 mm Includes: - Complete tool set: Drill bit set for boring head 1 HW grooving saw blade 2 x DP grooving shank cutters 1 HW-WP finish cutter 3 collet chucks with collets - New showroom machine -

Condition: used, Year of construction: 2005, CNC machining center Manufacturer: Homag Type: PROFI BOF 722/58/18/F/K Year of manufacture: 2005 Technical data - Machining area: X = 6000 mm / Y = 1800 mm / Z = 380 mm from the suction cup - 5-axis swivel head (replaced in 2019) - Rear spindle with Flex5 unit - 2 traversing tool changers with 18 positions each - Computer with Windows 10 (new 1.5 years ago) - Woodwop 8.1 Gedpfx Aijzux Imekebw - 2nd vacuum pump, can be switched on/off separately

Condition: ready for operation (used), Year of construction: 2013, Travel X/Y/Z: 1800mm/900mm/900mm, table dimensions X/Y: 1950mm/900mm, max. table load: 3000kg, tool holder: SK40, max. spindle speed: 12000rpm, feed rate: 12m/min, repeatability: +/-0.003mm, positioning accuracy: +/-0.005mm, weight: approx. 17000kg, control: Heidenhain. Documentation available. An on-site inspection is possible. Gjdpfx Ajxp Rb Ueiksbw

Condition: used, Year of construction: 2000, Offered for sale is a vertical CNC machining center with tool changer. Control system: HAAS CNC control with operator monitor and keyboard. Equipped with automatic tool changer, machine table, enclosed work area, control pendant and tool cart with tool holders. Inspection possible by arrangement. Gjdpfx Aisz N Harokebw

Condition: excellent (used), Year of construction: 2016, operating hours: 13,100 h, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: Heidenhain, controller model: TNC 620, overall weight: 3,500 kg, spindle speed (max.): 15,000 rpm, coolant supply: 20 bar, number of spindles: 1, Equipment: chip conveyor, documentation/manual, 3-axis machining center Manufacturer: Spinner Type: VC-450 Year of manufacture: 2016 Control system: Heidenhain TNC-620 Operating hours: approx. 13,100 h Serial number: BV XXXX Technical parameters: ----- Gbedpfxszytzfs Aiksw • Travel ranges X-Y-Z: 450 x 400 x 400 mm • Work table 770 x 410 mm • Max. workpiece weight: 200 kg • Spindle: 15,000 rpm • Tool magazine: 24 x HSK-A63 • Coolant system 20 bar including internal coolant supply, bed flushing, ..paper band filter with 300L additional tank volume • LED work area lighting • Oil mist extraction • 3D touch probe • Chip conveyor • Machine weight: approx. 3.5 t • Dimensions: 2,400 x 1,700 x 2,500 mm Accessories: ----- • Documentation

Condition: ready for operation (used), Travel X/Y/Z: 500mm/350mm/300mm, table dimensions X/Y: 320mm/320mm, max. table load: 450kg, speed: 13000rpm, spindle power: 5.5kW, spindle mount: HSK40, tool positions: 24, max. tool diameter: 75mm, max. tool length: 200mm, max. tool weight: 3kg, rapid traverse: 60m/min. Machine dimensions X/Y/Z: approx. 4200mm/1250mm/2450mm, weight: 4400kg, control: Fanuc Series 21i-MB. Documentation available. On-site inspection is possible. Godpfev H Dhaox Aikjbw

Condition: used, Year of construction: 1994, A Maho 4-axis CNC machining center is offered for sale. X/Y/Z travel: 600mm/500mm/400mm, tool holder: ISO 40, max. spindle speed: 6000rpm, feed rate: 6m/min, rapid traverse: 13m/min, operating hours/power-on hours: approx. 58569h, control: Philips CNC 432. Equipped with through-spindle coolant supply with high-pressure pump, fully enclosed splash guard, automatic tool changer, 2-pallet changer and chip conveyor. The main spindle is defective and has already been removed from the machine. The machine is not operational. Documentation available. An on-site inspection is possible. Gjdpfx Aez Hn S Ajiksbw

Condition: excellent (used), Year of construction: 2018, Technical specifications: Manufacturer: RAMBAUDI/JOBS Model: SARA Year of manufacture: 2018 Control: HEIDENHAIN itnc640 Dimensions: 12,600 x 6,830 x 5,045 mm Table: 5,000 x 2,500 mm Gbsdpfx Aiev Rfwkokow Maximum load capacity: 15 tons The machine is equipped with a universal milling head with two tilting planes (C and A). The rotation of the tool in the universal milling head as well as the swivel movements of the C and A planes are controlled by a drive spindle: - Speed: 5,000 rpm - Power: 25 kW (S1) / 33 kW (S6 60%) - Torque: 482 Nm (S1) / 637 Nm (S6 60%) - Tool holder: ISO50 DIN69871 collet Main axes: - X-axis: Longitudinal movement of the work table - Y-axis: Transverse movement of the RAM slide - Z-axis: Vertical movement of the RAM - Swivel axis 1 (C plane): Rotation of the milling unit around the vertical axis of the RAM. - Swivel axis 2 (A plane): Rotation of the milling unit around a plane offset by 45° from the C plane. Automatic Tool Changer (ATC): - 24-position chain magazine (ISO 50) - Tool change arm between spindle housing and magazine Additional Equipment: - RENISHAW NC4 laser AXIS SPEEDS | Axis | Travel | Speed | |-----|-----|----- | | X-axis (optical measuring system) | 5,200 mm | 12 m/min | | Y-axis (optical measuring system) | 3,000 mm | 12 m/min | | Z-axis (optical measuring system) | 900 mm | 12 m/min | *(Note: Optical measuring systems ensure precise position detection for the X, Y, and Z axes.)*

Condition: used, Year of construction: 2025, table length: 3,100 mm, table width: 2,100 mm, Technical data - Table size: 3100 x 2100 mm - 4-axis main spindle - Linear tool changer, 16 positions - 2 vacuum pumps - 12 vertical drilling spindles Gbsdpfxezuw Tzo Aikew - 1 dado blade

Condition: ready for operation (used), Year of construction: 2005, Offered is a Röders RXP 500 high-precision milling machine year 2005, approx. 160763h, spindle approx. 100000h incl. HSK-25 high-frequency spindle with 50000rpm, 42-fold chain magazine, HG sensor, high-accuracy option incl. spindle cooling as well as Renishaw probe, machine weight approx. 5500kg. Viewing is possible by arrangement. Gbsdpexyk S Ijfx Aiksw

Condition: used, Machining area: - in the X direction without gluing 6000 mm - in the X direction with gluing 5000 mm - in the Y direction 1200 mm - in the Y direction with main spindle + center distance 20 mm 1300 mm max. workpiece height above - top edge of suction plate Z1 100 mm - max. workpiece thickness Z2, dependent on equipment/application Work table height: approx. 950 mm 1 main spindle with pneumatic feed stroke - drive power: 12 kW in S-1 operation - tool holder: HSK F63, taper diameter = 38 mm - tool change: automatic - change force: 11000 N - tool weight: max. 6 kg - direction of rotation: clockwise/counterclockwise, programmable - speed range: continuously variable 1500 - 24000 rpm, programmable - drive: frequency-controlled three-phase motor - spindle lubrication: single grease lubrication - spindle cooling: water cooling 1 CNC axis rotating 360 degrees 1 vertical drilling unit S21 Machine table consists of: - 6 support arms adjustable in the X direction, each with a rear and center stop, all stops controlled by the program - 6 sets of suction plates consisting of a total of - 6 suction plates 114 x 159 x 100 mm - 6 suction plates 125 x 75 x 100 mm - The support arms and suction plates can be individually positioned according to the corresponding workpiece size. Changeover area: - without pendulum machining, without gluing: X = 2 x 2900 mm - free space in the middle: X = 200 mm - without pendulum machining, with gluing: X = 2 x 2150 mm - free space in the middle: X = 700 mm - with pendulum machining, without gluing: X = 2 x 2400 mm - free space in the middle: X = 1200 mm - with pendulum machining, with gluing: X = 2 x 1700 mm - free space in the middle: X = 1600 mm Feed drive system Rapid traverse rates: - X-axis 100 m/min - Z-axis 25 m/min Air pressure: 6 bar Gbsdpfx Aiszupibekjw Tool changer magazine with 18 positions Tool coding: position-coded Tool weight: max. 6 kg Tool length: max. 150 mm Tool diameter: max. 100 mm when fully loaded max. 150 mm with free adjacent positions or nesting Central connection for extraction Mains voltage: 3/N/PE, 400/230 V, 50 Hz 1 vacuum pump 100 m3/h

Condition: ready for operation (used), Year of construction: 1991, A CNC vertical machining center Emco is available. Travel X/Y/Z: 420mm/330mm/400mm, table dimensions X/Y: 650mm/320mm, max. table load: 150kg, tool positions: 12, tool holder: SK40, speed: 4500rpm, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 2400mm/2300mm/2450mm, weight: approx. 2750kg, control: Emcotronic TM02. An on-site inspection is possible. Gedjy H I H Sepfx Aikobw

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 835mm/510mm/510mm, speed: 12000rpm, spindle power: 14kW, table dimensions X/Y: 1000mm/560mm, table load capacity: 800kg, max. workpiece height: 720mm. Tool positions: 20, tool holder: SK40, max. tool diameter: 80mm/130mm, max. tool length: 250mm, rapid traverse: 30m/min, feed: 20m/min. Machine dimensions X/Y/Z: approx. 3500mm/3500mm/2700mm, weight: approx. 4500kg, control: Heidenhain iTNC 530, operating hours: 112962h, spindle hours: 30702h. Including chip conveyor, IKZ, distance measuring system. Documentation available. On-site inspection is possible. Gbedov H Dgpepfx Aiksw

Condition: used, Technical specifications Gbodozutp Sepfx Aikow - Robust steel frame construction - Dust-protected linear guides - Digital servo drives on the X, Y, and Z axes - X-axis with rack and pinion drive - Y and Z axes with ball screws - Rapid traverse rate: X/Y axes: up to 50 m/min - Z-axis: up to 15 m/min - Maintenance-free servo motors with high-resolution encoders - Integrated extraction system for machining units - Additional extraction connections - Manual loading and unloading of workpieces - Pneumatic positioning stop - Work area - Workpiece length: 200-3,050 mm (with roller conveyor) - Workpiece width: 50-1,250 mm - Workpiece thickness: 8-80 mm - Electrical data - Power supply: 400 V / 50 Hz - Optional equipment - Air-conditioned control cabinet for operation at temperatures above 35°C - ECO-Plus energy-saving mode with automatic standby, drive shutdown, and control shutdown

Year of construction: 1990, condition: ready for operation (used), Travel X/Y/Z: 400mm/300mm/495mm, spindle center table distance: 25mm-325mm, spindle nose table distance: 125mm-620mm, rapid traverse: 24m/min, feed rate: 5m/min, spindle type: ball screw, spindle diameter: 36mm, speed: 6000rpm, spindle power: 5.5kW, spindle mount: BT40. Tool slots: 30, tool change time: 2.5s, clamping time: 7s, max. tool diameter/length: 110mm/250mm, max. tool weight: 8kg. Table dimensions X/Y: 315mm/315mm, table angle: 7.5°, table clamping force: 3400kg, max. workpiece weight: 150kg. Dimensions X/Y: approx. 1900mm/2300mm, weight: approx. 4500kg, control: Fanuc 0-M, operating hours: 732h, piece counter: 172776. Including cooling lubricant system and tool magazine with 30 places. Documentation available. On-site inspection is possible. Gbjdpfjt Nhmzsx Aiksw

Condition: good (used), Year of construction: 2001, Parts shown by hand not come. Gbjdpfx Asuxrv Hoikow Technical data shown on pictures.

Condition: repair required (used), Year of construction: 2014, machine/vehicle number: AA2/002546, number of slots in tool magazine: 24, overall weight: 6,600 kg, table length: 5,200 mm, table width: 1,300 mm, TECHNICAL DETAILS Table length: 5,200 mm Table width: 1,300 mm Number of milling spindles: 1 Type of milling table: Beam table Tool changer positions: 24 MACHINE DETAILS Voltage: 400 V Current consumption: 64 A Dimensions & Weight Dimensions (L x W x H): 10,300 x 2,450 x 2,800 mm Net weight: 6,600 kg Gbsdpfx Aiey Nybtoksw Transport packages: 1 EQUIPMENT Drilling tool Vacuum pump Tools Becker Vtlf 250 vacuum pump: - Year of manufacture: 2008 - Main motor power: 5.5 kW - Connection diameter: 70 mm - Oil-free: Yes Note: The machine requires repair. There is an issue with the CAN bus system.

Condition: used, Horizontal machining center with 2-fold shuttle table STEINEL type BFZ 5 with CNC control SIEMENS Sinumerik 810 M serial no. 34 year of construction 1988 Travel X: 500 mm, Y: 400 mm, Z: 320 mm Clamping surface, table surface 500 x 400 mm Tool holder ISO 40 Spindle speed max. 6300 rpm infinitely variable Main spindle drive 12 kW Mains connection 380 Volt, 50 Hz, 30 kVA - Tool changer with 24 tool positions - Changing table with 2 stations - Interface for data transfer - Coolant unit with chip conveyor Space requirement L x W x H 4100 x 2500 x 2650 mm Weight approx. 8 tons good condition Gedpoutuyiefx Aikebw Transport dimensions: Machine L x W x H 3200 x 2500 x 2650 mm, approx. 7.5 tons. Chip conveyor L x W x H 3500 x 1100 x 2100 mm, approx. 600 kg

Condition: used, Technical Data Machining Area - X = 3200 mm - Y = 1250 mm Workpiece Dimensions - Length X: 200 - 3200 mm - Height Y: 35 - 1250 mm - Thickness Z: 8 - 60 mm - Maximum workpiece weight: 50 kg Workpiece Reference System The preliminary positioning of the workpiece in the longitudinal direction (X-axis) is performed in the loading area on the left side of the machine by means of a stop, which is placed in a fixed position in the work table. Gjdpfxezutrao Aikjbw Workpiece Positioning Unit The workpiece positioning system in the X-axis is achieved by two clamping jaws that hold the workpiece during the machining process. The movement is controlled by two independently driven servomotors. Workpiece Support Surface The workpiece support surface, on which the machining units are located, consists of a series of rubber-coated rollers that form the workpiece reference in the Z-axis. On the opposite side of the machining unit, a counter-pressure system is installed, which optimally holds the workpiece in the machine. Converter and voltage connection for voltages of 380 - 415 V (+-10%), 50/60 Hz Air conditioning unit for the electrical control cabinet bSolid control system HP kit for the rapid movement of the workpiece clamping jaws The combined system, with servomotor and precision planetary gearbox, enables movement speeds of up to 110 m/min with fast acceleration ramps. Consent pedal for opening/closing the clamping jaw BH28 drilling head with individually addressable spindles - 17 vertical spindles (7 in the X-axis, 10 in the Y-axis) - 5 horizontal spindles (3 in the X-axis, 2 in the Y-axis) - 1 dado blade unit with a fixed working direction in X 11 kW electric spindle with HSK-F adapter with "C" axis torque - 11 kW, 24000 rpm in S1 operation - 6000 - 24000 rpm programmable via NC Angle saw unit HSK F63 for saw blade - Max. speed 8,400 rpm Drilling and milling unit for top and bottom edges / end drilling and milling unit - Max. speed 9,000 rpm - Tool holder with ER20 collet 8-position tool changer magazine - disc changer Accessory kit "Sensitive Surfaces" for workpiece transport Laser device for manual reading of QR codes SOPHIA - IoT Connection Dowel Ø8x40 mm and glue insertion unit Barcode2Hops with variables MultiPost upgrade POST_Element Splitter NC-Hops 7.0

Condition: ready for operation (used), Year of construction: 1996, Travel X/Y/Z: 740mm/500mm/480mm, tool holder: SK40, tool positions: 22, max. spindle speed: 4700rpm, control: Heidenhain TNC 426 PA. Machine dimensions: approx. 3000mm/2400mm/2700mm, weight: approx. 5000kg. The machine was used exclusively for machining plastic and operated without metalworking fluid. The coolant system must be repaired. The backup battery of the control is depleted and must be replaced. Inspection possible by arrangement. Gbedpfezukt Usx Aikow

Condition: used, Year of construction: 2001, A CNC machining center with 3 axes is offered. Travel X/Y/Z: 630mm/500mm/500mm. Table load capacity: 400kg. Tool taper: SK 40. Number of axes: 3. Spindle hours: approx. 7300h. Operating hours in motion: approx. 7300h. The buffer battery must be replaced. The hour meter readings are stated as approximate values. Control: Heidenhain TNC 426. Equipped with a 16-position chain-type tool changer, coolant system, chip flushing gun, touch probe and handheld control unit. Weight: approx. 4800kg. Inspection possible by arrangement. Gsdpfxo Ahy Sys Aikjbw

Year of construction: 2000, condition: ready for operation (used), Travel X/Y/Z: 600mm/410mm/520mm, table dimensions X/Y: 840mm/420mm, spindle speed: 6000rpm, spindle power: 8.5kW, tool holder: SK40, tool positions: 22, rapid traverse X/Y/Z: 36m/36m/20m/min. Machine dimensions X/Y/Z: approx. 2200mm/2300mm/2300mm, weight: approx. 2500kg, control: Heidenhain TNC 426. An on-site inspection is possible. Godpfxjv Uqb No Aikjbw