Used Cnc Machining Center for sale (68,199)

Condition: used, Year of construction: 2011, Basic machine Stk Volt 400 EU Stk #93.07.31 Series 800 TV working areas 5020x1905 Stk # 52.19.14 8 Matic supports (Y=1825 mm) with 3 basic modules Stk # 52.19.92 for automatic vacuum suction cups Additional basic module for automatic vacuum suction cups Matic Stk # 52.19.99 4 working areas H= 50 Stk # 52.21.63 Front and rear stops H=50- 8 traverse Stk # 52.24.11 Integrated additional stops H=50 mm for 8 traverse Stk # 52.24.15 Central double rail (removable) with 6 stops Stk # 52.24.18 H=50 mm suction cup TV 145 x 30 H50 Stk # 52.18.69 Suction cup TV 145 x 55 H50 Stk # 52.18.70 Suction cup TV 145 x 145 H50 Stk # 52.18.71 8 Posi-Aids H50 Stk # 52.21.66 Group 800 - Electrospindle Prisma K 11 kW Stk # 52.21.80 Drilling head F50L2 (38V-80X-40Y-L0/90°) Stk # 52.22.51 PBTC-On Pos.3 Electrospindle PB+Rapid 6 Stk # 52.21.96 Tool magazine Rapid 12 on board (X,Y-traveling) Stk # 52.22.90 Stk # 52.22.92 Vacuum pump with 250 (300) M3/H50(60) HZ Item # 52.21.97 Storage Location: Supplier Bedpfx Asxnldhsdxjww

Condition: good (used), Year of construction: 2011, Ref. -No.: 10598 Manufacturer: HELLER Type: MC 2000 Year of construction: 2011 Type of control: CNC Control: Siemens 840 D sl Storage location: Halberstadt Country of origin: Hermany Machine-No.: 50XXXX X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 1000 mm Work spindle torque (25% ED): 242 Nm Tool Taper: SK 40 Numbers Of Tools In Magazin: 54 Tool Piece Magazine With: 80 Pcs./pcs. Turning Speeds: 10000 RPM Drive Capacity - Spindle Motor: 17 kW High-Pressure Pump: 50 bar Speed range - main spindle: 10000 RPM Numbers Of Pallets: 2 Size Of Pallet: 630 x 500 mm Weight Of The Machine Ca.: 13000 t spindle running time: 7000 H Operating hours: 14000 H Preparation area: 4 x 90° hydraulic pressure: 200 bar Further information: Bwodpoxmfa Hsfx Adxjw - The machine has been measured - The geometry is in excellent condition - The spindle runs a little rough - Clamping towers and cutting tool holders are also included - 2 additional clamping towers - 2 replacement pallets - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in the work area - Central cooling unit for motor spindle and control cabinet - Control unit at the workpiece setup station - NC-controlled rotary table - Clamping hydraulics The machine can be viewed under power by appointment.

Condition: ready for operation (used), Year of construction: 2012, Travel X/Y/Z: 670mm/430mm/460mm, table dimensions X/Y: 900mm/410mm, max. workpiece weight: 350kg, tool holder: SK40, spindle speed: 8000rpm, spindle inner diameter: 60mm, max. spindle-to-column distance: 460mm, rapid traverse: 24m/min, feed rate: 10m/min. Machine dimensions X/Y/Z: approx. 2200mm/2050mm/2500mm, weight: approx. 3700kg, control: Heidenhain TNC 620, operating hours: approx. 21550h, spindle hours: approx. 3500h. Documentation available. An on-site inspection is possible. Bwodjxq Exdjpfx Adxjw

Condition: used, Year of construction: 2012, CNC Machining Center Manufacturer: Unverzagt Model: UVA 550 Plus Year of manufacture: 2012 Control: Siemens 828D Operating hours: approx. 3,000 Travel X/Y/Z: 600 x 400 x 500 mm Tool positions: 20 Tool holder: SK40 Bsdpfswv Tm Nox Adxeww Spindle speed range: 10,000 rpm Hexagon wireless probe Chip conveyor Spindle chiller IKZ (internal coolant system) 31125ä

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,300 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 15 m/min, controller model: LNC-Control, workpiece length (max.): 150 mm, total height: 2,100 mm, total length: 3,100 mm, total width: 1,860 mm, rotational speed (min.): 1,000 rpm, rotational speed (max.): 24,000 rpm, number of spindles: 1, number of slots in tool magazine: 8, tool weight: 600 g, input voltage: 380 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMA-Machinery designs and assembles Dutch CNC routers and CNC portal milling machines. Flexible operation is ensured by the CadCm software from "PEGASUS"—draw easily using macros or freeform lines. No G-codes are required; you can import your own designs via DXF, DWG, EPS, PLT, and more. Continue using AutoDesk Fusion, AutoCAD, SketchUp, or other CAD programs without limitation. Available working areas and prices: • 1300x2600mm, Z-axis 200mm: €31,800 • 1600x3200mm, Z-axis 200mm: €37,500 • 2100x3200mm, Z-axis 200mm: €41,600 CNC Milling Machine BudgeCraft: Compact High-Precision Machining Center (0.01 mm) Dutch-assembled CNC milling machine compliant with EG2023 EUROPE CE-Standard. Spindle Motor (ATC Spindle): - Tool holder type: ISO-BIESSE - Inverter-controlled spindle motor. 3-axis controlled, 3,000–24,000 rpm. Double linear high-precision guides guarantee maximum accuracy. The 2nd Z-axis is positioned by a ball screw, enabling 3D and relief machining. - Tools are clamped automatically. Spindle sensors monitor correct clamping and release of tool holders. During tool changes, both cones and spindle are pneumatically cleaned. Drive System: - Brushless servo motors allow for high acceleration and extremely high speeds. These motors reduce maintenance due to digital control and feedback, providing greater precision and improved machining finish. - Linear tool magazine located under the gantry, with 8–14 spacious positions. Automatic tool changer. Reference Stops: - Reduced cutting losses and efficient, rapid positioning using stop cylinders at the front of the vacuum worktable. Standard rear-mounted solid stop cylinders for large sheet dimensions are directly attached to the table. Automatic Tool Length Measurement System: Milling Spindle Protective Cover: - A key safety device that protects the motor from foreign objects and debris, helping to extend motor life and improve workplace safety. CNC/NORM EG2023-EUROPEO Safety: - Optical electronic safety ensures immediate stoppage of the machine when a person enters the secured area, protecting individuals from machine-related hazards. Technical specifications: - X-axis working range: 2,600–3,200mm - Y-axis working range: 1,300–1,600–2,100mm - Table size options: 1326 / 1632 / 2132 - Z-axis stroke: mm Bjdpfx Ajxl Apisdxeww - Structure: Portal / Gantry construction: Yes - Spindle motor: 9kW air-cooled - ATC spindle: Yes - Speed: 3,000–24,000 rpm - X-axis movement: 50m/min - Y-axis movement: 50m/min - Z-axis movement: 15m/min - Tool holder: ISO30–ER32/ER40 - Software: Pegasus PWoodMilling - Vacuum pump: Side channel blower turbine vacuum pump 7.5kW, max flow rate: 340m³/h

Condition: used, Year of construction: 1997, operating hours: 10,227 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 525 mm, travel distance Z-axis: 500 mm, table width: 540 mm, table length: 1,000 mm, overall weight: 4,500 kg, spindle speed (max.): 12,000 rpm, For sale is a machining centre from Deckel Maho, model DMU 60 E. Bwedpfsw I R I Hsx Adxsw The machine is fully functional and ready for immediate use. Particularly noteworthy are the low program run hours. Technical data: Year of manufacture (estimated): 1997 Control: HEIDENHAIN TNC 426PB Control ON: 8,283 h Machine ON: 31,148 h Program run: 10,227 h Total power requirement: approx. 26 kVA Travel X-axis: 600 mm Travel Y-axis: 525 mm Travel Z-axis: 500 mm Clamping surface: 1,000 x 540 mm Max. table load: 350 kg Spindle speed range: 20 - 12,000 rpm Tool holder: SK 40 Feed speed: 20 - 10,000 mm/min Rapid traverse X/Y-axis: 18 m/min Rapid traverse Z-axis: 15 m/min Tool changer: 25 positions Dimensions (L x W x H): approx. 2.95 x 2.1 x 2.26 m Weight: approx. 4,500 kg Transport and loading can be organised throughout Europe at additional cost, upon request. All prices are subject to VAT. Inspection possible by appointment. Contact us — our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Do you require a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For more information or contact options, please visit our website.

Condition: used, Year of construction: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS MACHINING UNIT "PRISMA: QUALITY AND PRODUCTIVITY AT THE HIGHEST LEVEL XILOG MAESTRO SOFTWARE: EXTREMELY SIMPLE MATIC PROGRAMMING" WORKTABLE: ONE POSITIONING FOR MULTIPLE MACHINING OPERATIONS TECHNICAL DATA AUTHOR M400 AXES Working area X-axis (inside stop) mm 3,680 Working area Y-axis (max. loadable piece on rear stops) mm 1,680 Workpiece passage Z / number of Z axes mm 170 / 1 Workpiece length with pendulum machining mm 1,650 Travel speed X-Y axes Pro-Speed m/min 85 Z-axis speed m/min 30 INSTALLATION Installed power KVA 62÷82 Compressed air requirement NL/min 400 Extraction air requirement m³/h 4,430 Extraction air speed m/s 25 Extraction nozzle diameter mm 250 GENERAL CHARACTERISTICS CNC-controlled drilling and milling center in gantry design and work table with workpiece supports, for carrying out: - vertical drilling on the panel surface - horizontal drilling on all four sides of the workpiece - groove milling with disc milling cutters - general milling work 3-4-5 axes MACHINE STRUCTURE The basic structure is a monolithic construction made of thick-walled steel. It is stiffened by welded reinforcements across the entire machine bed, making it extremely stable. The table shape used, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow with a minimum of space requirements. The mobile gantry support is made of a solid monoblock. It is positioned in the X direction on prismatic ground guides via recirculating ball slides. On this mobile unit carrier, the work unit is mounted on prismatic, ground guides and recirculating ball slides. All axes are moved on large-section prism linear guides and recirculating ball bearings with a large contact surface, ensuring optimal gliding even at the highest speeds and accelerations. Precise and rapid positioning of the movable gantry (X-axis) is achieved by a pinion and rack with helical teeth. Large-section recirculating ball screws ensure precise positioning of the work unit along the movable gantry (Y and Z axes). MOTORS, DRIVES AND INVERTERS Perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors, designed to achieve speeds of up to 90 m/min while ensuring the best finishing quality. CONTROL The control unit consists of a numerical control for milling and drilling machines with "Xilog Maestro" graphical user interface based on the Windows 7 Office operating system. 17-inch LCD color screen. QWERTY keyboard. Tilting control panel. Machine interface with Xilog Maestro software. Xilog Maestro Features Programming Parametric graphic programming Import of DXF files (2D; SPLINE, POLYLINE 3D geometries), linear or circular interpolation in three axes, linear in space, spiral in the selected plane. Programming with graphic and syntax aids for drilling and milling operations Automatic optimization of drilling operations and tool change cycles Possibility of Plate zero point shift for drilling on inclined or curved plate sides Bsdpoxnldbsfx Adxoww

Condition: good (used), Year of construction: 2017, Ref. -No.: 10596 Manufacturer: HELLER Type: H - 2000 Year of construction: 2017 Type of control: CNC Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine-No.: 56XXX X-Travel: 630 mm Y-Travel: 630 mm Z-Travel: 630 mm B-Axis: 0,001 ° Table Load: 500 kg Max. Tool Length: 350 mm Max. Tool Diameter: 160 mm Tool Taper: HSK 63 Numbers Of Tools In Magazin: 80 Turning Speeds: 16000 RPM Tool changer: Doppelgreifer Bwedpfx Ajxmfatsdxjw Max. Workpiece height: 850 mm Max. Torque: 95 Nm Rapid Travel X/Y/Z: 60 mm / min Rapid Traverse X-Axis: 80 m / min Rapid Travel Y-Axis: 80 m / min Rapid Traverse Z-Axis: 90 m / min Drive Capacity - Spindle Motor: 40 kW Internal cooling: 50 bar Numbers Of Pallets: 2 Size Of Pallet: 400 x 500 mm spindle running time: 1000 H Operating hours: 3000 H Workpiece interference circuit max.: 720 mm Media interface: 5 - fach Further information: - Equipped with NC rotary table. - State-of-the-art spindle technology. - Ideal for precise machining tasks. - Spindle hours: 1000. - Pallet can be rotated manually 4 x 90 - Hydraulic pressure 200 bar - Quick drill breakage check Machine can be viewed under power by arrangement

Condition: ready for operation (used), Year of construction: 2008, A CNC 5-axis portal machining center Alzmetall with milling-turning table is available. Travel X/Y/Z: 800mm/800mm/600mm, B-axis swivel: +/-120°, C-axis rotation: 360°, table diameter: 630mm, max. table load: 1000kg, tool holder: HSK-A63, spindle speed: 12000rpm, tool positions: 33, max. workpiece diameter: 90mm/125mm, max. tool length: 300mm, max. tool weight: 8kg, rapid traverse: 60m/min, feed rate: 30m/min. Machine dimensions: approx. 3700mm/3000mm/3200mm, weight: approx. 15500kg. Documentation available. An on-site inspection is possible. Bodpfexqgycex Adxjww

Condition: good (used), Year of construction: 2001, operating hours: 9,999 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 1,000 mm, Used CNC Vertical Machining Center (with pendulum table) Make: NORTE Type: VHS 630 Year of manufacture: 2001 Bwodpfjxdd U Rsx Adxow Travel paths: X2000mm x Y630mm x Z1000mm / Pendulum machining with vertical spindle, 2 work areas of 2 x 765mm

Condition: used, Year of construction: 2015, Used machine Year of manufacture: 2015 Features and technical data: Axes: X-axis: - Max. workpiece length: unlimited - Min. workpiece length: 250 mm - Traversing speed: 0–25 m/min Y-axis: - Max. workpiece width: 1,000 mm for all units Bwedpjxgkfzsfx Adxew - Min. workpiece width: 80 mm - Traversing speed: 0–50 m/min Z-axis: - Max. workpiece thickness: 60 mm - Min. workpiece thickness: 10 mm - Traversing speed: 0–20 m/min The minimum and maximum workpiece sizes depend on the weight and also on the length-to-width ratio! Units: Milling unit: - 4.5 kW motor (frequency-controlled) - incl. MASTERWORK software extension - Speed: 1,000 – 18,000 rpm - incl. integrated extraction control (during drilling, only the drill head is extracted; during milling, only the milling unit is extracted) - 4-position tool changer for ISO 30 taper 16-spindle drilling head: - Vertical spindles in X direction: 5 units - Vertical spindles in Y direction: 5 units - Horizontal double drilling spindles in X direction: 2+2 units - Horizontal double drilling spindles in Y direction: 1+1 units - Spindle distance: 32 mm - Spindle speed: 4,000 rpm - Motor: 1.7 kW Grooving saw: - In X direction - Speed: 4,000 rpm - Max. saw blade diameter: 125 mm - Motor: 1.7 kW (the grooving saw is integrated in the drilling head) Software/program: - MASTERWORK machine version Compressed air: - Required air pressure: 8 bar - Air consumption: max. 750 l/min Extraction: - Volume: 2,000 m³/h - Air speed: 25–30 m/sec - Extraction connection: 1 x 150 mm Additional features: - Air tables at the working area - Roller tables at infeed and outfeed - Board measurement sensor - Ball screw and linear guides - Rack and pinion drive - Central lubrication - DXF file import Machine dimensions: 2,100 x 2,410 x 1,510 mm Weight: approx. 1,300 kg Availability: short-term Location: 65439 Flörsheim

Condition: excellent (used), With NC dividing head Working travels 600 x 510 x 510 mm Spindle taper BT40 Spindle speeds -12'000 rpm Tool changer 20 Pos. Bsdpfx Adjwhlcmoxsww Control SIEMENS 810D Shopmill Coolant through spindle Zero point clamping system Misc. accessories MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 630 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, controller model: MSX-701IV, workpiece height (max.): 900 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 400 kg, total height: 2,600 mm, total length: 4,000 mm, total width: 2,400 mm, table width: 400 mm, table length: 400 mm, table load: 400 kg, overall weight: 9,800 kg, spindle speed (max.): 14,000 rpm, Offered here is a CNC horizontal machining center by the manufacturer Mori Seiki, model NH 4000 DCG. The machine is in very good condition and can be inspected under power in our facility. The machine will be loaded free on truck (FOT). Technical Data: Manufacturer: Mori Seiki Model: NH4000 DCG Year of manufacture: 2009 Control: MSX-701IV Travel (X-Y-Z): 560x560x630 mm B-axis: 360x1° indexing table Distance spindle center to top of pallet: 80-640 mm Distance spindle nose to center of pallet: 100-730 mm Pallet dimensions: 400x400 mm Number of pallets: 2 Pallet change time: 6 s Maximum workpiece weight: 400 kg Maximum workpiece diameter: 630 mm Spindle speed: 14,000 rpm Tool holder: BT 40 Bwjdpfxoxmhi Rj Adxjw Feed rates X-Y-Z: 50,000 mm/min Rapid traverse X-Y-Z: 50,000 mm/min B-axis max. rotation speed: 44.4 rpm Tool magazine: 60 positions Tool change time: 0.9 s Power consumption: 32.8 kVA Dimensions (LxWxH): 4,004x2,397x2,711 mm Weight: 9,800 kg

Condition: good (used), Year of construction: 2008, Ref. -No.: 10564 Manufacturer: TOYODA Type: FH 630 SX Year of construction: 2008 Type of control: CNC Control: Fanuc 31i - A Storage location: Halberstadt Country of origin: Japan Serial no.: NS2XXX X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 850 mm B-Axis: 360 ° Max. Workpiece Weight: 800 kg Max. Tool Weight: 27 kg Bodpfsxmd Ucjx Adxoww Max. Tool Length: 545 mm Max. Tool Diameter: Ø 120 mm Max. Size Of Workpiece Lxwxh: Ø 1000 x 1000 mm Tool Taper: BT - 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 6000 RPM Machine length: 7000 mm Machine width: 3500 mm Weight Of The Machine Ca.: 20,1 t Further information: - Equipped with IKZ and chip conveyor - NC rotary table 360,000 * 0.001° Machine can be inspected under power by arrangement.

Condition: ready for operation (used), Year of construction: 2013, Travel X/Y/Z: 1800mm/900mm/900mm, table dimensions X/Y: 1950mm/900mm, max. table load: 3000kg, tool holder: SK40, max. spindle speed: 12000rpm, feed rate: 12m/min, repeatability: +/-0.003mm, positioning accuracy: +/-0.005mm, weight: approx. 17000kg, control: Heidenhain. Documentation available. An on-site inspection is possible. Bwedpfx Adjxp Rb Uoxjw

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: PRATIX Z2-27, travel distance X-axis: 2,700 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 180 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, overall weight: 2,000 kg, spindle speed (min.): 24,000 rpm, number of slots in tool magazine: 10, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, Description TECHNICAL SPECIFICATIONS PRATIX Z2-27 AXES Usable working area X-Y-Z * 2,700-1,300-180 mm Axis travel X-Y-Z 3,060-1,735-250 mm Vectorial speed X-Y 60 m/min WORK TABLE Type MF Alu grid table 1,225 – 2,750 Vacuum pump Becker 250m3 DRILLING UNIT F12 Vertical drills No.-rpm 12 (7X-5Y) – 4,000 MILLING MOTOR Power kW (HP) 7.5(10) Min - Max spindle speed rpm 1,500 – 24,000 Bwjdsxgdc Hepfx Adxew Tool magazine in table No. 10 positions Installed power KVA 23÷28.5 Total machine weight 2,800 kg Price excluding VAT and tools

Condition: good (used), CNC Machining Center HOMAG OPTIMAT BAZ 222/40/K with Edge Banding Unit and Loading Gantry Electronically controlled milling, edge banding, post-processing, and drilling center for the production of furniture parts, solid wood, or similar materials. Two independent Y-axes for the main spindle and edge banding unit Clamping table with 8 clamping consoles Y-1300 mm with hose-free vacuum guidance POWER CONTROL with PC85 controller Software: WoodWOP 5.0 Main spindle: 7.5 kW 12-position carousel tool changer Interface for automatic tool change of machining units with integrated pneumatic/electric/electronic supply and C-axis drive Drill head with 17 spindles Cross-cut saw unit 360-degree edge banding unit / for strip materials: rolls Edge thickness: max. 2 mm with veneer; max. 3 mm with plastic Chip removal conveyor Vacuum pump Busch MM 1322 A, 300/360m3/h (replaced in 2013) Bwedpfxexmvtqs Adxew

Year of construction: 2014, condition: good (used), functionality: fully functional, FOM INDUSTRIE DALI 70 For profiles up to 7m 6.5KW Electrospindle ISO30 10 tool magazine on head (some tools are included) 8 Vices with independent positioning Automatic lubrication of guide blocks and recirculating ball screw lead screws Pendular machining MQL Barcode Reader Bedpfx Ajxcywljdxsww Dimension 8600x2050 Weight 3900KG Can be loaded on truck

Condition: excellent (used), Year of construction: 2020, HOMAG Centateq N-500 -BHP 100 / VANTAGE 710 #0-250-71-6275 -Year of manufacture: 2020 -Table size: 3100 x 2250 mm -Stop system: front right, front left, rear -2x vacuum system 580/690 m3/h -Tool spindle 10 kW, air-cooled -Aggregate interface for main spindle, C-axis -Tool changer magazine, rear, fixed -Milling unit with feeler ring Bedpfoxfkdzox Adxsww

Condition: good (used), Year of construction: 2014, Ref. -No.: 10553 Manufacturer: HANDTMANN / BAVIUS Type: HBZ Trunnion 120 Year of construction: 2014 Type of control: CNC Control: Heidenhain TNC 640 Storage location: Halberstadt Country of origin: Germany Bwsdpfx Adjxmd T Soxew Machine-No.: 200XXXXX X-Travel: 1270 mm Y-Travel: 1100 mm Z-Travel: 900 mm Table Height: Ø 1200 mm Table Load: 2000 kg Max. Tool Weight: 20 kg Max. Tool Length: 90 x 200 / 24 x 400 mm Max. Tool Diameter: Ø 130 mm Tool Taper: HSK 100 Numbers Of Tools In Magazin: 40 Tool Piece Magazine With: 140 Pcs./pcs. Spindle Turning Speed - Stepless: 14.000 RPM Max. Torque: 15000 Nm Rapid Traverse X-Axis: max. 60 m / min Rapid Travel Y-Axis: max. 60 m / min Rapid Traverse Z-Axis: max. 60 m / min Machine length: 7500 mm Machine width: 5500 mm Machine Height: 3500 mm Weight Of The Machine Ca.: 26 t Rapid traverse C-axis: max. 25 RPM Rapid traverse A-axis: max. 20 RPM A-axis (swivel axis): - 30 / + 120 ° C-axis (rotary table axis): 360 ° Further information: - Horizontal machine, Y-axis arranged vertically - Machine stand designed as a welded construction - set up on height-adjustable precision wedge shoes, chip tray with cooling lubricant device, for external splash water cooling capacity: approx. 400 liters, with clean water pump, LP circuit, approx. 40 1/min at approx. 5 bar and rinsing nozzles on the Z-axis and/or the spindle - Complete safety housing - Stainless steel interior lining - Work area lighting - Manual loading door to the work area with polycarbonate safety window with glass front panel - Side viewing window to the work area with polycarbonate safety pane with glass front pane - Maintenance area freely accessible - HSK 100 hollow shank taper - Tool clamping via springs, tool release hydraulically - Tool clamping control - Cone cleaning - incl. spindle orientation

Condition: used, Year of construction: 2010, incl. tool Working area: 3005 x 1250 mm with 12-position changer Bwjdpfxexlf A So Adxow Storage location: Sonnefeld

Condition: excellent (used), Year of construction: 2014, High-Performance Machining Center Spinner VC1200-HS / Siemens 840-SolutionLine Technology: In-line direct drive, spindle speed 12,000 rpm, power 28 kW, torque 178 Nm, tool holder SK40. Equipped with Siemens 840D Solutionline control system and 15" color screen, featuring a graphical user interface for shop floor programming (Siemens "ShopMill") and software version "Operate". Milling spindle up to 12,000 rpm with in-line direct drive. Travel distances: X-1200 mm, Y-730 mm, Z-650 mm; rapid traverse 48 m/min. Tool taper size 40 according to DIN 69871-A, drawbar bolt according to DIN 69872-A. General Features: - Air blast system for spindle taper - High-speed automatic tool changer with dual-arm changer for 32 tools - Linear guides on all three axes - Full enclosure with splash guard and work area lighting Technology: In-line direct drive, spindle speed 12,000 rpm, power 28 kW, torque 178 Nm, tool holder SK40 Tool magazine: 32 tool positions, dual-arm changer. Clamping surface 1,400 x 710 mm. Maximum table load 1,000 kg. Rapid traverse X/Y/Z 48 m/min. Chip management: scraper belt chip conveyor. Coolant supply: internal coolant supply (IKZ system) with filter, 22 bar, and additional 350-liter tank. Direct position measuring system in X/Y/Z (glass scales). Workpiece measurement with probe, BLUM TC52. Tool magazine: dual-arm tool changer for 32 tools. Pneumatics: compressed air connection at the spindle head. Control options: Siemens MyDynamics, 5-axis milling package. Bjdsxcwgwspfx Adxsww

Condition: good (used), Year of construction: 2010, Ref. -No.: 10530 Manufacturer: DöRRIES - SCHARMANN Type: Alpha 1000 Year of construction: 2010 Type of control: CNC Control: Siemens SINUMERIK 840 D Storage location: Halberstadt Country of origin: Deutschland Bedpexmd Tlofx Adxeww X-Travel: 2000 mm Y-Travel: 2000 mm Z-Travel: 2000 mm A-Axis: 0 - 90 x 0,001 ° B-Axis: 360 x 0,001 ° Number of T-slots: 1 + 8 Max. Workpiece Weight: 5000 kg T - groove width: 22 mm T - slot spacing: 100 mm T-Slots: DIN 650 mm Tool Taper: HSK - A 100 Tool Piece Magazine With: 207 + 10 Pcs./pcs. Max. Torque: 1250 Nm Feed Speeds X/Y/Z Axis: 1 - 30000 mm / min Rapid Travel X/Y/Z: 30,00 mm / min Drive Capacity - Spindle Motor: 45 kW Total Power Requirement: 100 kW Dimensions Of The Machine Ca.: 13 x 8 x 4,5 m Size Of Pallet: 2 x 1000 x 1000 mm Spindle speed gear stage 1: 1 - 1096 1 / min Spindle speed gear stage 2: 1096 - 6000 1 / min Further information: - Measuring probe - Chip conveyor - Coolant system - Coolant through the spindle - Pallets with 5-way media connection and clamping hydraulics - Extraction system - Swivel spindle A-axis 0 - 90 - NC rotary table B-axis

Condition: new, Year of construction: 2025, Ref. -No.: 10457 Manufacturer: IGREK Type: VMC 1160 Year of construction: 2025 Type of control: CNC Control: SIEMENS SINUMERIK 828D Storage location: Istanbul Country of origin: Türkiye X-Travel: 1160 mm Y-Travel: 610 mm Z-Travel: 600 mm Main spindle drive power: 9 kW Spindle Taper: HSK Tool Piece Magazine With: 24 Pcs./pcs. Spindle Speed: 10000 RPM Rapid Traverse X-Axis: 40 m / min Rapid Travel Y-Axis: 40 m / min Rapid Traverse Z-Axis: 40 m / min Machine length: 3500 mm Machine width: 2900 mm Bjdpexmd Snjfx Adxsww Machine Height: 2500 mm Weight Of The Machine Ca.: 8 t Further information: This is a new storage machine with 0 operating and spindle hours. The machine is available immediately and can be ordered with Siemens or Heidenhain controls. Optional installation and servicing of the machines can be offered.

Condition: good (used), Year of construction: 2006, Ref. -No.: 10527 Manufacturer: MITSUI SEIKI Type: HU 150 A Year of construction: 2006 Type of control: CNC Control: FANUC 15i Storage location: Halberstadt Bedsxl N Tujpfx Adxsww Country of origin: Japan Machine-No.: SN1XX X-Travel: 2400 mm Y-Travel: 2000 mm Z-Travel: 1500 mm B-Axis: 360 ° Table Dimensions (Lengthxwidth): 1500 x 1500 mm Table Load: 8.000 kg Tool Taper: MAS BT50 Spindle Speed: 6.000 RPM Max. Torque: 2.212 Nm Further information: Pull stud: Mitsui IKZ: 30 bar Machine can be inspected under power by arrangement. The machine is currently still in production.