Used Cnc Arcade for sale (8,887)

Condition: new, Year of construction: 2024, Technical specs CNC – 1100 Control Syntec 21MA-E Drive system YASKAWA servo drive Main motor 7,5/11 Kw Spindle speed till 7000 Rpm Max drilling dept 1000 mm Drilling diameter 3 till 30 mm X stroke 1000 mm Y stroke 800 mm Z stroke 1000 mm cutting feed 0-300 mm/min inner hole accuracy 0.005mm Surface roughness of the hole Ra 3.2um spindle speed 7000 Rpm X servo motor 2.3Kw Y servo motor 3.0 Kw Z servo motor 2.3 Kw oil pump motor 5,5 Kw oil pressure 21 bar Filtration precision 20 um table loade 7000 kg machine weight 10 ton machine power 34 Kw. Gedpeu Nyxwjfx Aikjbw Capacity of cutting oil tank 800L Machine size 4,8 x 3,8 x 2.6 meter Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: used, Year of construction: 2018, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 58281, working width: 1,700 mm, input voltage: 400 V, working length: 2,200 mm, number of slots in tool magazine: 18, control type: CNC control, Rittal Perforex BC 1007 HS CNC drilling and milling centre for automated machining of enclosures and flat panels: cut-outs, holes and threads straight from EPLAN Pro Panel / DXF. Built 2018 in Germany. Machine no. 58281, Rittal part no. 4050.107. Specification: - Clampable flat panels (W x H): 2450 x 1700 mm - Max machinable panel area: 2200 x 1700 mm Gsdpfx Ais Ahq D Hjkobw - Clampable enclosures (W x H x D): 1400 x 1600 x 1600 mm - Max machinable area, enclosures: 1200 x 1600 mm - Tool holder: pick-up system, 18 positions - Control: 4-axis CNC, Rittal OptiPanel, 15" monitor - Electrical supply: 400 V, 3-phase, 50 Hz, 32 A max - Control voltage: 24 V DC - Footprint (W x H x D): 4390 x 2410 x 2720 mm - Transport size (W x H x D): 3800 x 2300 x 2500 mm - Weight: approx. 2,300 kg Key features: - Enclosure (cube) and flat-panel machining - Pressure plate with swarf extraction - High-performance spindle, minimum-quantity lubrication - Automatic tool breakage check - Pneumatic clamping, DIN tooling - Machines mild steel, stainless, aluminium, copper and plastics - Direct import from EPLAN Pro Panel, DXF import Supplied with: - Safety guarding with light curtains - Operator console and keyboard - Tool magazine with tooling - Rear enclosure-machining bay - Control cabinet - Operator documentation Specification from Rittal published data for the BC 1007 HS; buyer to verify configuration on inspection. Viewing by appointment in Sunderland, UK. Buyer to arrange disconnection and collection unless agreed.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 8046723D038, spindle motor power: 11,000 W, turning diameter over cross slide: 380 mm, spindle speed (max.): 3,000 rpm, overall weight: 2,000 kg, type of input current: three-phase, total width: 1,800 mm, total length: 2,500 mm, total height: 1,800 mm, torque: 373 Nm, Equipment: documentation/manual, CNC LATHE STYLE 350 [850 dbc] - main spindle motor power 11kW Gedpfsvvwblex Aikebw - main spindle bore Ø54 mm, 3,000 rpm - manual universal with 3 jaws D200mm - VDI30 turret with 8 positions - Coolant gun, including high-pressure pump - Work area lighting (LED) - Cooling system - Automatic lubrication - Ball screw protection - Full fairing with sliding doors - Speed potentiometer - Coolant control button - Handwheel - Remote support on machine – allows remote diagnostics

Condition: excellent (used), Year of construction: 2020, 2020 Haas ST-25 CNC Slant Bed Lathe & Tooling Package Haas Autogrip 3H-H12 Ø250mm 3 Jaw Power Chuck. Maximum Swing Ø806mm. Maximum Swing Over Cross Slide Ø527mm. Maximum Cutting (Varies With Turret) Ø381mm. Bar Capacity Ø76mm. Axis Traverses 'X'=236mm, 'Z'=527mm. Rapid Traverses 'X'=24m/min, 'Z'=24m/min. Spindle Bore Ø117.3mm. Maximum Spindle Speed 3,400rpm (22.4kW Motor). Spindle Nose A2-6. 12 Station Turret. Power On Hours 1,979. S/No. 3119435 (2020). With Coolant System (Tank Capacity 208L), Marposs Tool Setting Arm, Tailstock, Footswitches, Signal Tower, Tooling Package (Turning Tools, Jaws, Collets & coolant Fixings) & Manual. Machine Foot Print W3,630 x D2,290 x H2,340mm. Weight 4,536kg. Gbsdoz Rqmropfx Aiksw

Condition: excellent (used), Year of construction: 2023, Great opportunity to purchase this high-end CNC turning machine with driven tools, Y-axis and counter-spindle. This machine was built in 2022, but installed and first used in February 2023. Only 1545 actual operating hours on the counter. Including: Subspindle and Y-axis Built-in Motor Turret with 12 tool stations Chip conveyor Manual in-machine tool presetter (pivoting type) Gbsdpj Aigt Rsfx Aiksw Manual in-machine tool presetter (removable type) (Spindle 2) Standard Workpiece Unloader (Built-ln Type) Coolant system with increased pressure of 5 bar Full technnical specifications available in the attached document. Optional: set of tooling and tool holders (availability is to be discussed) This machine is in very good condition and can be inspected in operation in Belgium. Immediately available for delivery. Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: used, functionality: fully functional, NIKKEN CNC rotary table CNC 320V, Series 400V - Faceplate Ø320 mm - Spindle bore Ø80 mm - Center height 230 mm - Siemens motor Godpfx Aioymyh Tekebw

Condition: used, total height: 1,500 mm, total length: 2,150 mm, total width: 1,750 mm, Year of manufacture: 2014 Colour: White Empty weight: 800 kg - Year: 2014 - Documentation available: Yes - CE marking present: Yes - Serial number: 2400611132F - Drive system: CNC - Saw type: Automatic - Horizontal/vertical: Horizontal - Mitre cutting available: Yes - └ Round cutting capacity at 45° [mm]: 190 - Round cutting capacity [mm]: 240 - Power [kW]: 6.6 - Saw blade length [mm]: 2980 - Saw blade width [mm]: 27 - Saw blade thickness [mm]: 0.9 - Max. feed length [mm]: 3200 - Workpiece clamping: Hydraulic - Options: Automatic infeed, Digital readout - Transport dimensions: 2150mm x 1750mm x 1500mm (l x w x h) - Transport weight [kg]: 800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Gbodj Ai Dnzopfx Aikew Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2007, Ref. -No.: 10726 Manufacturer: DMG GILDEMEISTER Type: GMX 300 linear Year of construction: 2007 Type of control: CNC Control: Siemens 840D powerline Storage location: Halberstadt Country of origin: Germany C-axis speed: 5000 RPM Travel quill: 1500 mm Turning Diameter: 640 mm Swing Diameter: 640 mm Tool Taper: HSK63-A Spindle Speed Min.: 12.000 RPM Rapid Travel Speed X-Axis: 16 m / min Rapid Travel Speed Z-Axis: 40 m / min Travel -X Axis: 1500 mm Main Drive: 25/35 kW C-Axis For Work Spindle: Torque: 390 Nm Spindle distance: 1930 mm Spindle 1 chuck diameter: 200-315 mm Spindle 2 chuck diameter: 315 mm hydraulic tank: 30 L. coolant reservoir: 1000 L. Coolant tank at chip conveyor: 370 L. Spindle motor drive: 13,2/22 kW Bearing diameter: 80/55 mm Quill holder: 5 MK Flow rate: 20 l/min Further information: Gjdpfxe Aka Hqj Aikjbw The machine is offered including all available accessories and technical documentation. The machine has been cleaned, is fully operational and can be inspected under power by prior appointment.

Condition: used, Year of construction: 2013, Mori Seiki NLX2500-700SY CNC Lathe with C&Y Axis, Barfeed Unit. (2013), Swing Over Cross-slide 360mm, Maximum Cutting Diameter 366mm, Maximum Cutting Length 705mm, Bar Capacity 80mm, Spindle Speed 4,000rpm, Milling Speed 10,000rpm, Main Spindle Power 18.5Kw, C Axis 0.001 degrees, Y axis -/+ 50mm, 12 Station Turret, Mori Control M730BM, equipped with Toolsetter, Swarf Conveyor, 3 Jaw Chuck, Parts Catcher. S/No. NL254130462. Country of Origin: Japan Location: This lot is located in Leicester, UK. A charge of £250 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Gbjdpfj Ah E Aajx Aikjw

Condition: good (used), Year of construction: 2009, High-performance CNC turning and milling center for the complete machining of complex turned parts. The documented configuration combines a main and counter spindle with two tool slides, two 12-position turrets, Y and B axes, and C axes on both spindles. Machine type: INDEX G300 RatioLine Year of construction: 2009 Turning length: 710 mm Main spindle: D90 43 kW Counter spindle D90 28 kW Control: INDEX C200-4D The INDEX G300 RatioLine is designed as a flexible CNC turning machine for complete machining in a single setup. The main and counter spindles enable the transfer of the workpiece within the machine. The two tool slides support parallel and combined turning, drilling, milling, and threading operations. Feature Specification Series G300 RatioLine Machine type CNC turning and milling center with main and counter spindle Year of construction 2009 (according to nameplate) Turning capacity 710 mm Tool carrier 2 tool slides, each with a 12-position turret Control INDEX C200-4D with 26 cm color flat screen Operating and display language English Machining concept • Complete machining on main and counter spindle • Two tool slides for flexible machining sequences • First slide with X, Y, Z, and B axes • Second slide on the right with X and Z axes • C axes on main and counter spindle • Synchronized spindle functions via electronic cam 12-position tool turret in the spindle area Spindles and clamping system Feature Specification Main spindle D90, size 8 according to DIN 55026/55021 and ISO 702/1 Main spindle power max. 43 kW at 100 percent duty cycle Counter spindle D90, size 8 according to DIN 55026/55021 and ISO 702/1 Counter spindle power max. 28 kW at 100 percent duty cycle Indexing Main and counter spindle with 2.5-degree indexing C axes Available on main and counter spindle Clamping cylinder Through-hole clamping cylinder on both spindles Clamping pressure Variable on both spindles from 8 to 80 bar Spindle synchronization Electronic cam Internal detail and workpiece handling Tool slide and turret Feature Specification Tool slide 1 X, Y, Z, and B axes; turning length 710 mm Turret 1 12 stations, DIN 69880-30, involute and T-slot positioning Tool slide 2 Arranged on the right; X and Z axes Turret 2 12 stations, DIN 69880-30, T-slot positioning Tool capacity Total of 24 turret stations Thread drilling Rigid tapping with driven tools; C-axis required C-axis functions Transmit and Tracy function Work area with main and counter spindle as well as two tool turrets Control and electrical data Feature Specification Control INDEX C200-4D Screen 26 cm color flat screen Control cabinet 1,800 mm wide Signal light Blue; bar end and fault Teleservice Preparation for analog teleservice Nominal voltage 400 V AC Nominal current 118 A Maximum fuse rating 125 A Nominal power 69 kW Connected power 82 kVA Frequency 50 Hz Control voltage 24 V DC Read operating indicators The control panel photo shows the following individual counters. The general on-time and hydraulic counters are at 99,999:50 hours and thus appear as limit or saturation values. They should not be used as verified total operating hours. Feature Specification Spindle S1 9,682:10:41 h Gbjde Ai Eqzspfx Aikow Spindle S2 3,561:06:03 h Spindle S3 12,230:20:08 h Spindle S4 12,311:38:59 h Chip conveyor 5,379:34 h Coolant 22,260:00 h

Condition: used, Year of construction: 2021, turning diameter 320 mm turning length 530 mm greates pass round over bed 610 mm control SLIMline Operate 4.7 Siemens Swing dia. over traverse guideway 400 mm Max. rpm 5.000 min/-1 power capacity - main spindel 16,5 / 11,0 kW max. Torque 168 / 112 Nm spindle diameter in front bearing 120 mm max. bar capacity 65 mm max. chucking diameter 320 (250) mm chucking diameter 210 mm spindle nose A2-6 number of toolpositions 12 pos. tool taper VDI 30 driven statition 12 pos Spindle speed - driven tool stations max. 6.000 min -1 power capacity - driven tool-stations 5,44 kW max. Torque 15 Nm tailstock travel 550 mm taper of center MK 4 tension force 4 kN x-axis 242,5 mm y-axis +/- 40 mm z-axis 540 mm rapid traverse X: 30 m/min rapid traverse Y: 22,5 m/min Gbsde Aiv A Iopfx Aikjw rapid traverse Z: 36 m/min total power requirement 28 kVA weight of the machine ca. 4,3 t dimensions of the machine ca. 4,0 x 3,2 x 2,1 m CNC - Turning- and Millingcenter DMG MORI - CLX 350 V4 - From a facility closure - Extensive accessory package - Fully equipped - Only approx. 1,053 spindle hours - Only approx. 6,684 power-on hours - Chip removal package - "Alternating Speed" technology cycle - WITHOUT automation / robot

Condition: good (used), Year of construction: 1996, CNC lathe, manufactured by INDEX, model G200, year of manufacture 1996, with Hydrobar bar feeder. Control system: Siemens. Maximum turning diameter: 200 mm Maximum turning length: 445 mm Spindle bore: 30 mm Further data can be found in the datasheets. Machine documentation available. Gedpfxo Aicyaj Aiksbw Machine in good condition.

Condition: used, Year of construction: 1990, turning diameter über Bett 720 mm control Fanuc chucking diameter 600 mm Gsdpfx Aij Aiiulokobw centre distance 1500 mm weight of the machine ca. 8500 t dimensions of the machine ca. 5600,0 × 2850,0 × 2300,0 mm

Condition: good (used), Year of construction: 2003, CNC turning machine, manufacturer: INDEX, type: G 200-4, year of manufacture: 2003 Control system: Siemens Chuck diameter: 160 mm Spindle bore: 42 mm Gjdpfxo Aicyze Aikobw Turning diameter, max.: 200 mm Turning length: 445 mm Chip conveyor, machine, documentation included. Without tailstock. Further data can be found in the data sheet. In good condition.

Condition: used, Year of construction: 2020, turning diameter 480 mm turning length 1.225 mm control SLIMline Operate Siemens greates pass round over bed 700 mm Swing dia. over traverse guideway 370 mm Max. rpm 3.250 min/-1 power capacity - main spindel 33 / 22 kW max. Torque 630 / 420 Nm spindle diameter in front bearing 150 mm max. bar capacity 102 mm chucking diameter 315 mm spindle nose A2-8 number of toolpositions 12 pos. tool taper VDI 40 driven statition 12 pos Spindle speed - driven tool stations max. 4.000 min -1 power capacity - driven tool-stations 5,44 kW max. Torque 20 Nm number of toolpositions 6 pos. tool taper BT tailstock travel 1.200 mm taper of center MK 5 tension force 12 kN x-axis 307,5 mm y-axis +/- 60 mm z-axis 1.240 mm rapid traverse X: 30 m/min rapid traverse Y: 22,5 m/min rapid traverse Z: 30 m/min total power requirement 60 kVA weight of the machine ca. 7,2 t dimensions of the machine ca. 5,5 x 3,5 x 2,1 m CNC - Turning- and Millingcenter DMG MORI - CLX 550 V4 - from a business closure - extensive accessory package - fully equipped - only approx. 895 spindle hours - only approx. 4,901 power-on hours - chip removal package - "Alternating Speed" technology cycle - extensive accessory package Gsdpfx Aij Aiv Dhskobw

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, ## 2021 Star SB-20R Type G – 20 mm CNC Sliding Head Lathe Gbjdpfx Aiez U Acmekow 7 axis | Twin spindles | Driven tooling | Guide-bush / non-guide-bush operation | FMB magazine bar feeder Available from Swiss CNC, this 2021 Star SB-20R Type G CNC sliding head lathe combines 20 mm bar capacity, twin-spindle machining and a versatile tooling platform for precision component production. Equipped with FANUC CNC control, it offers turning, milling, drilling, tapping and back-working capability within a compact machine layout. The 10,000 rpm main spindle and 9,000 rpm sub-spindle both feature C-axis control, supporting accurately positioned machining operations on the front and rear of the component. The fully independent sub-spindle allows front- and back-working operations to overlap where the component and programme permit, helping reduce cycle times and minimise additional handling. ### Guide-bush and non-guide-bush flexibility A key feature of the SB-20R Type G is its ability to switch between guide-bush and non-guide-bush operation. Guide-bush mode supports the material close to the cutting point, making it particularly suited to slender components and longer turned features. For shorter components, non-guide-bush operation can reduce bar remnant length and improve material utilisation. This flexibility allows manufacturers to adapt the machine to different component geometries and production requirements. ### Technical specification | Specification | Details | |---|---| | Manufacturer / model | Star SB-20R Type G | | Year of manufacture | 2021 | | Maximum machining diameter | 20 mm | | Controlled axes | Seven: X1, Y1, Z1, C1, X2, Z2 and C2 | | Maximum headstock stroke — guide-bush mode | 205 mm | | Headstock stroke — non-guide-bush mode | Up to 2.5 × bar diameter, maximum 50 mm | | Main spindle speed | Up to 10,000 rpm | | Sub-spindle speed | Up to 9,000 rpm | | Sub-spindle chucking capacity | 20 mm | | Spindle positioning | C-axis control on both spindles | | CNC control | FANUC CNC | | Rapid traverse | Up to 35 m/min | ### Tooling capability - Gang-type turning-tool arrangement, with six 12 mm or seven 10 mm square turning-tool positions, depending on the fitted tool block. - Four front-working sleeve positions for end-working operations. - Cross-drilling and milling capability, with modular cartridge tooling configurations available for different machining requirements. - Four-position back-working station, supporting static or driven tooling according to configuration. - Independent sub-spindle movement for component transfer and rear machining. ### Included equipment - FMB Turbo 2-20 automatic magazine bar feeder for 3.2 m bar stock. - Filtermist FX mist extraction system. - LNS MH500 Turbo swarf conveyor. - FireTrace fire suppression system. - Selection of tooling and workholding. The supplied bar feeder, extraction and swarf-handling equipment provide a practical package for manufacturers looking to add automated 20 mm bar-machining capacity. ### Machine hours and availability Power-on and cutting hours to be confirmed. 2021 machines available in the UK, offered individually. Price on application, plus VAT. Delivery, installation and training available. Contact Swiss CNC for pricing, machine videos, inspection arrangements and further information.

Condition: used, total length: 3,300 mm, total width: 2,100 mm, total height: 1,700 mm, Year of manufacture: 1996 Colour: Green Empty weight: 2.000 kg - Year: 1996 - Documentation available: Yes - └ Type Documentation: Technical data, User manual, Operating system - Drive system: Teach-in Gedpfxj Ai Ebbo Aikjbw - Power [kW]: 7.5 - Centre height [mm]: 265 - Swing over bed [mm]: 530 - Carriage turning diameter [mm]: 290 - Distance between centres [mm]: 1700 - Bed width [mm]: 300 - Spindle bore [mm]: 58 - Min. spindle speed [rpm]: 35 - Max. spindle speed [rpm]: 2500 - Options: Three-jaw chuck, Fixed steady - Transport dimensions: 3300mm x 2100mm x 1700mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2020, 5-axis CNC machining center Manufacturer: Houfek Type: Scorpion CE21RA Year of manufacture: 2020 Technical data - Workpiece size: 3200x2100x150 mm - Travel ranges X / Y / Z: 3900 / 2750 / 350 mm - Rapid traverse X / Y / Z: 70 / 70 / 35 m/min - Spindle: HSD ES 779 L 6P, 22 kW, max. 24,000 rpm HSK A63 - Drilling unit: 36 drilling spindles, grid 32 mm, stroke 70 mm, 1.7 kW (3 pcs.), drill chuck D = 10 mm (side screws) - Chain tool changer: 60 tools, max. length 180 mm, max. 100 mm, max. 3 kg, servo motor - Disc tool changer: 21 tools, max. length 150 mm, max. 150 mm, max. 5 kg, servo motor (additional controlled axis) Gbodpfx Aij Aiubdskjw - Vacuum table: Grid table (nesting), 8 zones, controlled via the control panel - Additional connections: pneumatic 4x pairs 6 mm (external clamping elements), vacuum 4x pairs 12 mm (templates, fixtures) - Machine accuracy: 0.1 mm / 1000 mm - Repeatability: 0.05 mm - Flatness and squareness X, Y, Z: 0.1 mm / 1000 mm - Electrical connection: 3/N/PE 400 V, 50 Hz, rated current 117 A, control voltage 24 V DC, IP 54 - Compressed air: min. 7 bar, approx. 300 l/min Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2015, AJAX AJEV 180 x 750 CNC Turning Centre with Duplamatic style Turret, Tailstock, Fanuc Oi Mate - TD control. New 2015. Weight 1200 Kgs Gsdpfxow A Sh Ej Aikobw

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, For sale is a state-of-the-art CNC-controlled waterjet center consisting of 2 machines Machine 1: Robot with processing cell and integrated SERVO turning table. Machine 2: Robot with 2 processing cells and 2 integrated SERVO turning tables. This waterjet center is ideal for companies looking for a flexible and efficient solution for demanding cutting tasks. They are characterized by high precision, flexibility and reliability. - Robot arm NJ-16-3.1 Foundry: The robot has a load capacity of 16 kg and a working radius of 3100 mm. It is particularly robust and flexible, equipped with an IP65 protection class and is flange-mounted directly behind the cell. - SERVO turning table: With a maximum load of 500 kg and a faceplate center width of 2800 mm, the interpolating turning table offers maximum precision and repeatability. - Processing cell: The processing cell measures 2350 x 4500 mm and is equipped with sound insulation. - High-speed roller shutter: Integrated into the cell wall, the high-speed roller shutter ensures safe access and complies with Machinery Directive 2006/42/EC. - SL-VI 30 Plus high-pressure pump: This pump achieves a pressure of up to 4136 bar, ideal for precise cutting processes. - Water cutting head: The water cutting head is a central component of the system and offers maximum precision. It is equipped with a high-pressure line feed, a manual change system for quick replacement. Additional features: - CNC control: Siemens 840D controller with integrated PROFINET for controlling the robot and integrated S7 319 safety technology. Gbedoua U Tzopfx Aikew - Cyclone separator: Efficient system for particle separation - Programming options: The robot is programmed using simulation software, machining takes place in the CAM system and the programs are transferred via G-code. Main features Rotary table cells: - Robot arm NJ-16-3.1 Foundry: This robot has a load capacity of 16 kg and a working radius of 3100 mm. With an IP65 protection class, it offers a high level of robustness and flexibility. - SERVO rotary tables: The system is equipped with two SERVO rotary tables, each with a load capacity of 500 kg. These rotary tables enable precise machining of large workpieces with a maximum component size of 1000 x 1000 x 1000 mm. The repeat accuracy is ±0.15 mm with a rotation of 180° in just 5 seconds. - Machining cell: The machining cells each have a size of 2350 x 4250 mm. - 2 high-speed roller shutters: Integrated into the front wall of each cell, the cold-resistant and antistatic high-speed roller doors ensure safe access to the processing cell. The waterjet center offers outstanding processing flexibility and is suitable for various industrial PUR waterjet applications. Price on request or guide price < €300,000 Contact: For more information or to arrange a viewing appointment, please contact us on the telephone number provided.

Condition: good (used), Year of construction: 2007, CNC turning machine, manufactured by INDEX, model G200C-4, year of construction 2007. Control system: Siemens / INDEX, with bar feed system Hydrobar up to 42 mm. Maximum turning diameter: 200 mm. Gbsdpfe Aiczbex Aikjw Turning length: 445 mm. Bar passage: 42 mm. Equipped with collet chuck, tailstock, chip conveyor. Machine documentation available. Further data can be found in the data sheets.

Condition: reconditioned (used), Year of construction: 2012, Johnford SV-48H “Super Vertical” CNC Vertical Machining Centre Specification: Model: SV-48H Manufactured In June 2012 Heidenhain iTNC 530 CNC Control Maximum spindle speed: 6,000 rpm Machine Weight: 10,000 kg, stated on the plate Electrical supply: Three-phase, 415 V, 50 Hz Gbjdpfoz N H Enox Aikjw Full-load current: 76 A Compressed-air pressure: 5–7 bar X-axis travel: 1,220 mm Y-axis travel: 710 mm Z-axis travel: 630 mm Table size: 1,300 × 700 mm Maximum table load: 1,500 kg Spindle nose to table: 100–730 mm Spindle centre to column: 740 mm Spindle taper: BT50 Spindle motor: 11 kW continuous / 15 kW at 30-minute rating Spindle transmission: High/low gearbox Rapid traverse, X / Y / Z: 24 / 24 / 24 m/min Cutting feed rate: 1–12,000 mm/min Tool magazine: 24 Station Arm type ATC Maximum tool length: 400 mm Maximum tool weight: 15 kg For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #MAN001 Machine Serial Number: VBD12242 Cost: £24,950+ VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2020, Vertical CNC machining center Manufacturer: Homag Type: Optimat BHX055 Year of manufacture: 2020 Gbjdps Aiubhefx Aikew Technical specifications Workpiece length: 200 - 3,050 mm Workpiece width: 70 - 850 mm Workpiece thickness: 12 - 60 mm Milling spindle: 1 Main spindle power: 5 kW Max. speed: 18,000-24,000 rpm (depending on configuration) Tool holder: HSK-F63 or ETP25 Tool changer: 4-position magazine Vertical drilling spindles: 13 Horizontal drilling spindles X: 4 Horizontal drilling spindles Y: 2 Dado saw: X-axis Control system: Homag powerTouch / Power Control PC 86 Software: WOODWOP 7.x Total connected load: 11.5 kW Compressed air requirement: 7 bar Machine weight: approx. 1,580 kg Installation dimensions (L x W x H): approx. 2,950 x 1,984 x 1,895 mm CE marking Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2016, max. swing diameter 680 mm max. turning diameter 465 mm control SIEMENS - 840 D travel -x axis 265 mm travel -y axis 120 mm Gbede Ai Htqopfx Aikew travel -z axis 1.050 mm number of spindle speeds ^3.250 U/min spindle bore diameter 103 mm forward bearing diameter 140 mm numbers of positions in the tool changer 12 rapid travel x/y/z 30 / 10 / 30 m/min rapid traverse C-axis 100 U/min CNC Turning- and Milling Center | DMG MORI - ecoTurn 510 equipped with 12-way tool changer, turrets for driven tools, Y-axis and chip conveyor. The machine has only approx. 4.600 H spindle hours. The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMG ecoTurn 510 | eco Turn 510 | ecoTurn510

Condition: used, Year of construction: 2004, functionality: fully functional, Equipment: documentation/manual, CMZ Turning Center Gbodpoz Ih A Djfx Aikew 4 Axes: X, Z, C, B Type: TL 25 BTM Year: 2004 CNC: GE Fanuc Series 18i-TB Video Available Inspection Possible Jaw Chucks: Included ✅ Tool Holder: Included ✅ Documentation: Included ✅ Chip Conveyor: Included ✅