Used Clamps for sale (9,093)

Condition: used, Year of construction: 2000, length 1000 mm width 1250 mm height 2600 mm Cedpfozpbmnex Aptorf

Condition: used, Year of construction: 2000, length 800 mm Credpfxszpbmhe Aptof width 1250 mm height 1500 mm

Condition: used, Workbench vise, parallel vise ORION with dovetail guide and height adjustment Type: 125 Jaw width: 125 mm Jaw height: 25 mm Clamping range: max. 210 mm Overall height: 590 mm - 360° rotatable Cjdpfszpbrkox Apterf - Dovetail guide - Anvil surface for light straightening work - Approx. 250 mm height adjustment without lifting system Weight: 41 kg Good condition

Condition: good (used), Clamping plate, plate field, welding table, welding table, clamping plate, scribing and measuring plate, measuring table, straightening plate, short-stroke heavy-duty cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic press, bending machine, straightening machine, profile straightening system, strip straightening machine, strip straightening device, shaft straightening system, combined bending machine-straightening press, profile bending machine, bending machine bending/straightening press Crjdpfx Apjzbhqxotef -Mounting plate: Mounting plate with straightening press -Length: 3260 mm -Width: 1380 mm -Piston diameter: Ø 63 mm -Stroke: 200 mm -Pressure force: t -Overall dimensions: 3260/1380/H1940 mm -Weight: 2820 kg

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Crjdpethuzpsfx Aptsf Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: used, Fixed angle clamping table, fixed machine table, clamping angle, angle table for milling machine Clamping surface: 700 x 260 mm Table size: 785 x 310 mm (external dimensions) Slot width: 12 mm Slot spacing: 50 mm - for table mounting surface at 90° - Table top with 5 T-slots - Mounting surface 90° = 600 x 195 mm, hole spacing center-to-center 560 x 125 mm with Ø 12 mm elongated hole, 12 mm guide slot Dimensions L x W x H: 785 x 320 x 263 mm Weight: 80 kg Good condition Credpeznn Hljfx Aptsf

Condition: used, functionality: fully functional, 4 used adjustable wheel clamps for recovery crane, etc., fully functional. Codezq R Azjpfx Aptsrf No shipping possible. Please do not send email enquiries! If you have any questions, you can reach us by phone. Viewing and collection only by prior telephone appointment. Subject to changes, prior sale, and errors. We are a member of the Federal Association of Independent Motor Vehicle Dealers (BVfK) and carry the BVfK quality seal!

Condition: good (used), functionality: fully functional, Year of construction: 2018, overall weight: 90 kg, Description: For sale: a support claw, sheet metal claw, support clamp, sheet metal gripper, material gripper. * Manufacturer: NORD-GREIF Load capacity: 2500 kg Gripping width: 250-500 mm Weight: 90 kg Year of manufacture: 2018 Crodozrmg Espfx Aptsf Type: Z 51 Serial number: 1151508 * IMPORTANT: For logistical reasons, we only sell within Europe. The buyer is responsible for collection, loading, and transport. * “The seller excludes any warranty for the purchased goods. The goods are sold in their current condition, without any guarantee of their suitability for a specific purpose or that they are free from defects. The buyer confirms that they have inspected the goods before purchase and are satisfied with their condition. The seller assumes no liability for damage caused by the use of the goods. Any claims by the buyer against the seller are excluded.” * Date: 08/04/2026 * Price: €120 (negotiable) * Please do not hesitate to contact me if you have any questions or require further information.

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, straightening plate, scribing plate, test plate, inspection plate, precision measuring table Crjdpfx Aszldm Noptsf -Mounting plate: Test plate with support ribs -Clamping surface: 300 x 200 mm -Sheet thickness: 10 mm -Plate: with supporting ribs -Transport dimensions: 446/200/H74 mm -Weight: 11 kg

Condition: excellent (used), BAT Magnesium Shaker Fixture Cube Manufacturer: BAT Machine type: Shaker Fixture Cube / Mounting Cube Material: Magnesium For sale is a high-quality, used Shaker Fixture Cube made of magnesium, designed for vibration and shock testing systems. The mounting cube serves as a universal adapter and clamping device for securing test specimens, fixtures, and measurement setups on electrodynamic vibration testing systems (shakers). The precision-machined mounting surfaces with a threaded grid on all sides allow for the flexible implementation of various test setups. The magnesium design offers high rigidity with a low weight, making it particularly suitable for dynamic vibration and environmental testing. Codpozkhxtofx Aptsrf Technical data Manufacturer: BAT Type: Shaker Fixture Cube / Mounting Cube Material: Magnesium Dimensions: approx. 400 × 400 × 400 mm Thread size: M8 Threaded grid on all sides Precision-machined mounting surfaces Several large through-holes for mounting Features Robust, lightweight magnesium construction Precision-machined mounting surfaces Multi-sided threaded grid Large corner through-holes Industrial design Application areas Electrodynamic vibration testing systems Vibration testing Environmental testing technology Automotive testing technology Aerospace Electronics testing Testing and development laboratories Quality assurance Transport data Dimensions: approx. 400 × 400 × 400 mm Weight: approx. 35 kg Condition Used Optical condition as shown in the pictures. Normal signs of wear and tear consistent with age. Scope of delivery Magnesium Shaker Fixture Cube Scope of delivery as shown in the pictures Shipping via freight forwarder or self-collection possible. Subject to changes, errors and prior sale.

Condition: excellent (used), BAT Magnesium Shaker Fixture Cube with Adapter Plate Manufacturer: BAT Machine Type: Shaker Fixture Cube / Clamping Cube Material: Magnesium Design: with lateral adapter plate For sale is a high-quality, used magnesium clamping cube for vibration and shock testing systems. The Fixture Cube serves as a universal clamping and adapter device for securing test specimens, fixtures, and assemblies on electrodynamic vibration testing systems (shakers). The precision-machined clamping surfaces with numerous threaded holes allow for the flexible configuration of various test setups. The laterally mounted adapter plate further expands the range of applications. Technical Data Manufacturer: BAT Type: Shaker Fixture Cube / Clamping Cube Material: Magnesium Dimensions: approx. 330 × 330 × 330 mm Precision-machined clamping surfaces Thread pattern on multiple sides Large through-holes at the corners Lateral adapter plate made of aluminum Features Magnesium lightweight construction Precision-machined clamping surfaces Multi-sided thread pattern Adapter plate made of aluminum Industrial design Application Areas Electrodynamic vibration testing systems Vibration testing Environmental simulation Automotive testing technology Aerospace Electronics testing Testing and development laboratories Quality assurance Shipping Data Dimensions: approx. 330 × 330 × 330 mm Weight: approx. 30–40 kg Condition Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age. Scope of Delivery Magnesium Shaker Fixture Cube Adapter plate Scope of delivery as shown in the pictures Crsdpfx Ajzkhv Septsf Shipping via freight forwarder or self-collection possible. Subject to change, errors and prior sale.

Condition: used, functionality: fully functional, total length: 1,000 mm, load capacity: 2,500 kg, Bale Clamp Condition: Ready for use and fully functional Technical Condition: good Description: Bale Clamp / Rotating Clamp – suitable for forklifts Lifting Capacity: 2,500 kg | Condition: good, fully operational Robust bale and rotating clamp designed for professional use in warehousing, recycling, manufacturing, and paper handling. The unit is fully functional, immediately ready for operation, and in good technical and visual condition. Technical Data: Credpfxozpb Huo Aptjf Type: Bale clamp / Rotating clamp Capacity: 2,500 kg Length: approx. 1,000 mm Opening width: as specified by device (see photos / inspection) Back width: on request Projection: on request Dead weight: on request Condition: technically good, visually good Location: available immediately Notes: Sale as-is in current used condition. All prices are net plus 19% VAT. Sale exclusively to commercial buyers with valid VAT ID. No warranty or guarantee. Charger note does not apply to attachments, but is systemically retained.

Condition: excellent (used), BAT Magnesium Shaker Fixture Cube Manufacturer: BAT Machine type: Magnesium Shaker Fixture Cube / Clamping Cube Cjdpfx Ajzkgqnsptjrf Material: Magnesium Thread size: M8 For sale is a high-quality used magnesium clamping cube for vibration and shock testing systems. The fixture cube is used for the flexible mounting of test specimens, fixtures, and adapters on electrodynamic shakers. The numerous M8 threaded holes on several sides allow for a wide variety of test setups to be realized. The magnesium design ensures high rigidity while maintaining low weight and is ideal for applications in environmental, shock, and vibration testing. Technical data Dimensions: approx. 300 × 300 × 300 mm Material: Magnesium Thread size: M8 Threaded holes on several sides 2 lifting eyes for transport Internally weight-optimized design Application areas Electrodynamic vibration testing systems Shock testing systems Environmental testing technology Automotive Aerospace Electronics testing Quality assurance Research and development Testing laboratories Equipment Robust magnesium design Precision-machined clamping surfaces Thread pattern on several sides Lifting eyes Industrial design Transport data Dimensions: approx. 300 × 300 × 300 mm Weight: approx. 30–40 kg Condition Used From industrial use. Normal wear and tear consistent with age. Optical condition as shown in the pictures. Scope of supply BAT Magnesium Shaker Fixture Cube Scope of supply as shown in the pictures Shipping by freight forwarder or self-collection possible. Subject to changes, errors and prior sale.

Condition: used, length 1000 mm width 1000 mm height 800 mm weight of the machine ca. / t Clamping cube 1000x1000x800 mm Edge distance: 110 mm Csdpszk Riujfx Aptorf T-slot spacing: 180 mm Slot size: 34 mm Thickness: 115 mm Number of slots: 9 2 units available

Condition: used, Quick coupler system: Yes General condition: very good Credpfx Ajzln Sveptof Technical condition: very good Visual appearance: very good Price: On request = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: good (used), total height: 350 mm, overall weight: 5,000 kg, total width: 1,500 mm, table height: 350 mm, total length: 4,200 mm, Used steel clamping table Csdpfxsuzaafo Aptorf 4200 x 1500 x 350 mm Weight approx. 5000 kg

Condition: used, For sale is a welded T-slot angle bracket for clamping workpieces on a drilling machine. Dimensions: Leg lengths 1500 x 850 Width 1400 Credsznv E Njpfx Aptef

Condition: good (used), Clamping area: 250 x 300 mm Crodjzk Eh Eepfx Aptjf Bearing surface: 175 x 300 mm Slot width: 18 mm Weight: 23 kg

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 1,400 kg, empty load weight: 380 kg, drive type: Keine, Cellulose/Bale Clamp Load Center: 500 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: None Technical Condition: Good Description: Type 1.5T413, sideshift +/- 100 mm, sideshift independent of the opening range, overall width 970 mm, opening range 495 - 1,675 mm, arm height 440 mm, arm length 1,000 mm, arms smooth on the outside, inside with round bar, arm tips beveled, load capacity 1,400 kg at 500 mm load center, installation depth 158 mm, own center of gravity at 289 mm, weight approx. 380 kg, incl. pressure gauge, connection ISO - Class 2 A. Csdpfx Apsy A Uadetsrf

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 1,400 kg, empty load weight: 380 kg, drive type: Keine, Cellulose/Bale Clamp Load Center: 500 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Credpfxszk Sblo Aptsf Mast Type: None Technical Condition: Good Description: Type 1.5T413, sideshift +/- 100 mm, sideshift independent of the opening range, overall width 970 mm, opening range 495 - 1,675 mm, arm height 440 mm, arm length 1,000 mm, arms smooth on the outside, inside with round bar, arm tips beveled, load capacity 1,400 kg at 500 mm load center, installation depth 158 mm, own center of gravity at 289 mm, weight approx. 380 kg, incl. pressure gauge, connection ISO - Class 2 A.

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 1,400 kg, empty load weight: 380 kg, drive type: Keine, Cellulose/Bale Clamp Load Center: 500 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: None Technical Condition: Good Description: Type 1.5T413, sideshift +/- 100 mm, sideshift independent of the opening range, overall width 970 mm, opening range 495 - 1,675 mm, arm height 440 mm, arm length 1,000 mm, arms smooth on the outside, inside with round bar, arm tips beveled, load capacity 1,400 kg at 500 mm load center, installation depth 158 mm, own center of gravity at 289 mm, weight approx. 380 kg, incl. pressure gauge, connection ISO - Class 2 A. Crsdpfx Aszbn Eioptsf

Condition: used, Description: * Due to changes in the milling division and production restructuring, we are selling a grid plate / clamping plate and a clamping angle on short notice. * Grid plate / clamping plate: Dimensions: 1,000x800x45mm Bore spacing: 40x40mm Tapping thread: M12 Clamping bushing: d12F7 * Clamping angle with grid plates: Base area: 350x280x40mm Angle height: 350mm 2x grid plates: 350x280x25mm * Important: For logistical reasons, we only sell within Europe. * “The seller excludes any warranty for the purchased goods. The goods are sold in their current condition, without any guarantee regarding their suitability for a specific purpose or their freedom from defects. The buyer confirms that they have inspected the goods before purchase and are satisfied with their condition. The seller assumes no liability for damages arising from the use of the goods. Any claims by the buyer against the seller are excluded.” * Also available for individual sale. Crodpozp Hnqefx Aptjf Date: 07/28/2026 * Price for plate and angle: €1,500 (negotiable) * Please do not hesitate to contact me if you have any questions or require further information. *

Condition: used, Year of construction: 2014, total length: 3,400 mm, total width: 1,200 mm, total height: 2,880 mm, Colour: White Empty weight: 1.500 kg - Year: 2014 - Documentation available: No - CE marking present: Yes Cedpszgbugsfx Aptorf - CE certificate present: No - Serial number: 183610114 - Main motor power [kW]: 1.5 - Press drive: Hydraulic - Max. clamping width [mm]: 3000 - Max. clamping height [mm]: 1710 - Max. clamping depth [mm]: 100 - Number of cylinders [pcs]: 4 - Cylinder stroke [mm]: 1200 - Options: Remote control, Horizontal/vertical cylinders separately controlled - Voltage [V]: 400 - Current consumption [A]: 3.5 - Fuse [A]: 16 - Power [kW]: 1.5 - Transport dimensions: 3400mm x 1200mm x 2880mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Mounting block Cedpfx Aec Rmpujpterf 2 available 1230 x 1230 mm Height 560 mm Distance between holes 60 mm

Condition: excellent (used), Clamping plate made of cast iron Length 2000 mm Width 315 mm Height 90 mm T-slot width 32 mm Cedod Tcz Sspfx Apterf T-slot spacing 150 mm Diameter of the 12/8 fixing holes 27 mm Solid material