Used Clamping Tower for sale (9,553)

Condition: good (used), Clamping device extension, workpiece clamping device, extension, guide stop -Manufacturer: IROX, clamping device increase -Type: Level 2 -Number: 3x tensioners available Rcjdpfxo Aayvae Akieh -Dimensions: 105/45/H160 mm -Weight: 1.2 kg

Year of construction: 2024, operating hours: 2 h, condition: new, functionality: fully functional, For sale is an as-new spiral cooling tower made of stainless steel 304. As a precautionary measure, the basket was completely shot-blasted, and every single stainless steel component was pickled and then hand-polished. All screws and nuts have been replaced with new ones, all shafts have been replaced with stainless steel, and all ball bearings have also been replaced with stainless steel deep groove ball bearings. Replacement motors (drive for the basket and for the modular belt), as well as approximately 20 meters of modular belt, are included as spares. Total modular belt width: approx. 340 mm, blue area width approx. 280 mm, outer side areas on the right and left made of stainless steel. Total belt length: 100 m. Number of tiers: 9. Spacing between each tier: 105 mm. Overall tower height: 2060 mm. Rjdoyvrvpepfx Akioch Overall length incl. discharge belt: approx. 4000 mm; discharge section: approx. 2000 mm; total width: 2235 mm; running surface inner width: 370 mm; running surface outer width: 465 mm. Modular belt is made of stainless steel and POM. This spiral cooling tower also comes with a Z-belt. The Z-belt shown is for reference only and is not the original.

Condition: used, Universal   Shaker angle adapters / adapter devices   Universal shaker accessories Heavy-duty aluminum angle adapters, clamping devices, and adapter elements for vibration testing systems, vibration tests, and special applications   For sale is a used accessory set for an electrodynamic shaker or vibration testing system.   The set consists of various heavy-duty aluminum angle adapters, adapter plates, clamping devices, clamping blocks, and other accessories. Ideal for test specimen mounting, special designs, and vibration tests.   Technical data:   Manufacturer: unknown Type: Accessory set for electrodynamic shaker / vibration testing system Material: predominantly aluminum Design: angle adapters, adapter plates, clamping devices, and fasteners   Components: Rcsdpfx Akezpx Ucoieh Several heavy-duty angle adapters Adapter plates of various sizes Clamping and tightening devices Clamping blocks and adapter elements Fastening materials and other accessories as shown in the pictures   Features:   Heavy-duty aluminum construction Threaded and clearance holes Universally applicable Angle adapters for test specimen mounting Adapter plates Clamping and tightening devices Accessories as shown in the pictures   Application areas:   Electrodynamic shakers Vibration testing systems Vibration testing Material testing Environmental simulation Research and development Automotive industry Test specimen mounting and special designs   Scope of supply:   Complete accessory set as shown in the pictures Angle adapters Adapter plates Clamping devices Clamping blocks Fastening materials Other accessories as shown in the pictures   Weight: 600 kg   Condition:   Used Visual condition as shown in the pictures. Normal signs of wear and tear, scratches, and pressure marks are present.   Only the accessories shown in the pictures are sold.   The table shown in the pictures or other items not explicitly mentioned are not included in the sale.   Shipping on a pallet or collection is possible. Subject to changes, errors, and prior sale.   We will be happy to answer any further questions by telephone.

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of steel cast gray iron Table unit with clamping plate and very robust guide rail Table clamping surface: 5500 x 2000 mm Travel of the table clamping plate: approx. 3100 mm Table height / overall height: 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single start) - Machining table guided very stably on the bed - Metal telescopic guide rail cover - from a DROOP & REIN portal milling machine - Table longitudinal movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots, 28 mm - Drive via SIEMENS servo motor 1FT6134-6AB71-1AG2 with encoder IC200448S/R (RN 000 B25) Overall length: 9500 mm Width: 2000 mm Overall height: 1050 mm Weight: 27 tons Good condition Rjdpfx Aethuzpokijch

Condition: used, Manufacturer unknown Shaker Fixture Cube / Clamping Cube Aluminum Shaker Fixture Cube, approx. 240 × 240 × 240 mm Professional clamping cube for vibration testing systems, environmental testing technology, vibration tests, and testing laboratories. For sale is a used Shaker Fixture Cube made of aluminum. The clamping cube is suitable for the flexible attachment of test specimens, measurement setups, and fixtures on vibration testing systems. The solid aluminum construction offers high rigidity and is ideal for vibration tests, environmental testing technology, mechanical engineering, as well as research and development laboratories. Rcodpfx Ajzp E Dkekish Technical data: Manufacturer: Unknown Material: Aluminum Type: Shaker Fixture Cube / Clamping Cube / Fixture Block External dimensions: approx. 240 × 240 × 240 mm 4 precision mounting holes, Ø approx. 85 mm Central through-hole Threaded holes on all side surfaces Precision-machined clamping surfaces Robust industrial design Weight: 30 kg Features: Solid aluminum construction Precision-machined clamping surfaces Threaded holes on all side surfaces Four large mounting holes Central through-hole Suitable for individual test setups High rigidity with a compact design Accessories as shown in the pictures Application areas: Vibration testing systems Vibration testing Environmental testing technology Test stands Metrology Mechanical engineering Special machine construction Automotive Aerospace Research and development Testing laboratories Industry Scope of supply: Aluminum Shaker Fixture Cube Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age. The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping via parcel service or freight forwarder is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by phone.

Condition: used, functionality: fully functional, Year of construction: 2019, total length: 2,400 mm, load capacity: 4,500 kg, empty load weight: 577 kg, opening width: 1,300 mm, Clamping fork Load center: 500 Rcedpfx Aoz Svp Uokioh ISO class: ISO Class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: good Description: Good, ready-for-use condition, as returned by the previous owner // good working condition, as back from the pre-owner Length: 2,400 mm, center-to-center: 400 - 1,300 mm, fork arms at the wear limit.

Condition: used, BAT Shaker Fixture Cube / Clamping Cube Magnesium Shaker Fixture Cube Professional clamping cube for vibration testing rigs / shakers with an M8 thread grid for flexible test specimen mounting For sale is a used clamping cube for vibration and shock testing rigs. The adapter cube is used to securely hold test specimens Rodpfxezkgqnj Akijch on vibration testing rigs (shaker systems). Thanks to the numerous threaded holes on several sides, a wide variety of devices and test specimens can be flexibly mounted. The lightweight magnesium construction offers high rigidity with a comparatively low weight and is ideal for development, endurance, and environmental testing. Technical data: Manufacturer: BAT Type: Shaker Fixture Cube / Clamping Cube Material: Magnesium Threaded holes: M8 grid on several sides Dimensions (approx.): 300 × 300 × 300 mm Weight: approx. 28–32 kg (estimated) Features: Solid magnesium design M8 thread grid on several sides Two stop eyes Precision-machined clamping surfaces High rigidity with low weight Ideal for individual test setups Accessories as shown in the pictures Areas of application: Vibration testing rigs Shock testing Environmental simulation Automotive testing technology Aerospace Development and testing laboratories Quality assurance Industry Scope of delivery: Magnesium Shaker Fixture Cube Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear, scratches and marks are present. The table shown in the photos and other items not explicitly mentioned are not part of the sale. Shipping via parcel service is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: good (used), functionality: fully functional, For sale is a used, custom-built box-clamping machine for the production and assembly of wooden boxes. The system is equipped with a total of 6 hand-operated clamping devices from the Senco brand. The clamping devices are activated via foot valves, allowing the box parts to be positioned and clamped together during the work process. Particularly suitable for the production of wine boxes, fruit boxes, vegetable boxes, and other wooden packaging. Technical data / equipment: Manufacturer: Custom-built Machine type: Box-clamping machine / Box assembly machine 6 hand-operated clamping devices Clamping device manufacturer: Senco Activation via foot valves Pneumatic operation For clamping box parts together Workpiece support / workbench Adjustable fixture for different box dimensions Robust frame construction Suitable for: Wine boxes Fruit boxes Vegetable boxes Packaging boxes other wooden boxes and wooden packaging The machine is in used condition. Equipment and condition as shown in the photos. Rodpfszynf Sox Akiech Transport is possible for an additional charge! The machine is currently still at the customer's site but would be available shortly. The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information is without guarantee.

Year of construction: 1982, condition: good (used), Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: Siegert, Sheet metal clamp: Lifting clamp type SIL 10/20 -Grasping range: 1-20 mm -Load capacity: 1000 kg Rsdps Agfx Sefx Akioch -Transport dimensions: 305/200/H170 mm -Weight: 6.4 kg

Condition: good (used), Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp Rcodpfx Aj Agfvhjkish -Sheet metal clamp: Lifting clamp -Clamping range: 0-20 mm -Load capacity: 1 t -Transport dimensions: 125/70/H210 mm -Weight: 3 kg

Condition: used, BAT Shaker Fixture Cube Magnesium Shaker Fixture Cube 400 × 400 × 400 mm Professional fixture cube for vibration test benches, Redpfszkhxtex Akioch environmental testing technology, vibration tests, and testing laboratories. For sale is a used Shaker Fixture Cube made of magnesium. The fixture cube is suitable for the flexible mounting of test specimens, measuring setups, and fixtures on vibration test benches. The robust magnesium construction offers high rigidity while maintaining a low weight and is used in testing and development laboratories. Technical data: Manufacturer: BAT Material: Magnesium Type: Shaker Fixture Cube External dimensions: approx. 400 × 400 × 400 mm Threaded grid on all sides Several large through-holes for mounting Robust, precision design Equipment: Magnesium construction Precision-machined mounting surfaces Threaded holes on all sides Large corner holes for mounting Suitable for individual test setups Accessories as shown in the pictures Application areas: Vibration test benches Vibration testing Environmental testing technology Automotive Aerospace Research and development Testing laboratories Industry Scope of delivery: Magnesium Shaker Fixture Cube Accessories as shown in the pictures Condition: Used Visual condition as shown in the pictures. Normal signs of wear and tear due to age. The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping via parcel service is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, overall weight: 398 kg, total length: 500 mm, total width: 500 mm, total height: 820 mm, Clamping cube with Roemheld hydr. Screw in module Mounting holes 4 Pitch fixing holes 320 mm Pitch Roemheld module 170 mm Top to first module 120 mm Rcedpjywzamsfx Akish Length 500 mm Width 500 mm Height 820 mm Weight 398 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Universal Shaker Accessories / Clamping Devices Universal Shaker Accessory Kit Precision clamping devices, angle adapters, adapter elements, and holding devices for vibration test benches, vibration tests, and special designs For sale is a used accessory kit for an electrodynamic shaker or vibration test bench. The kit consists of numerous solid aluminum clamping devices, angle adapters, adapter plates, clamping blocks, holding elements, precision chucks, and other accessories for vibration tests. Ideal for test specimen mounting, special designs, and customized test setups. Technical data: Manufacturer: unknown Type: Accessory kit for electrodynamic shaker / vibration test bench Material: predominantly aluminum Design: Clamping devices, angle adapters, adapter elements, and fasteners Components: Several clamping devices Angle adapters of various sizes Precision adapter elements Clamping blocks Adapter plates Aluminum rings Holding and fastening elements Other accessories as shown in the pictures Features: Solid aluminum construction Precision-engineered components Threaded holes and clearance holes Universally applicable Clamping devices Angle adapters Adapter elements Clamping blocks Accessories as shown in the pictures Rcsdpfezpya Hjx Akieh Applications: Electrodynamic shakers Vibration test benches Vibration testing Material testing Environmental simulation Research and development Automotive industry Aerospace Test specimen mounting and special designs Scope of delivery: Complete accessory kit as shown in the pictures Clamping devices Angle adapters Adapter plates Clamping blocks Adapter elements Aluminum rings Other accessories as shown in the pictures Weight: 600 kg Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear, scratches, and pressure marks are present. Only the accessories shown in the photos are being sold. The table shown in the photos, and any other items not explicitly mentioned, are not included in the sale. Shipping on a pallet or collection is possible. Subject to changes, errors, and prior sale. We will gladly answer any further questions by telephone.

Condition: new, functionality: fully functional, We are selling a new clamping angle bracket, dimensions 6000x1200x2000 mm. New price: EUR 63,000. Rodjy Iz Tbspfx Akijch

Condition: used, mileage: 172,159 km, power: 265 kW (360.30 HP), first registration: 05/2006, fuel type: diesel, tire size: 445/75R22.5, axle configuration: 6x4, wheelbase: 4,790 mm, fuel: diesel, color: orange, gearing type: mechanical, number of gears: 16, emission class: euro3, suspension: hydraulics, total length: 13,370 mm, total width: 2,620 mm, Equipment: ABS, crane, = Additional Options and Accessories = - Radio - Rear view camera - Toolbox = Notes = Spierings SK377-AT3 Dutch registration documents. Max. lifting capacity: up to 10.4 m - 7,500 kg. Max. reach: 33 m - 1,900 kg. Horizontal height: 20 m. Max. hook height: 35.7 m, reach 28.8 m. Crane hours: 12,839 h = Further Information = General Information Operating hours: 12,839 Model number: SK377-AT3 6x4 / TOWER CRANE Technical Information Number of cylinders: 6 Axle Configuration Tire size: 445/75R22.5 Brakes: Drum brakes Suspension: Hydraulic suspension Front axle 1: Steerable; Tire tread left: 50%; Tire tread right: 50% Front axle 2: Tire tread left: 40%; Tire tread right: 40% Rear axle: Steerable; Tire tread left: 30%; Tire tread right: 30% Rodpfsy T Hwvsx Akiech Functional Crane: - Financial Information Price: On request = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the texts provided.

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 8,000 kg, Stone clamp ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: good Redez Sh Nujpfx Akisch Description: Year 2019, Capacity 800 kg, Width – 700 mm, 360° rotatable, ID OS2154

Condition: good (used), Clamping plate with T-slots, plate field, welding table, welding table, T-slot plate, clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -T-slot plate: clamping plate with support ribs -Length: 2020mm -Width: 1250mm -Groove width: 25 mm -Total dimensions: 2020/1250/H315 mm -Weight: 2280 kg Rodpfxjkrgibo Akisch

Condition: used, Technical details: table length: - mm table width: - mm table load: - t height: 1250 mm width: 1000 mm depth: 800 mm weight of the machine ca.: 1200 kg 2 units available (price per unit) Rcjdpfxezuzr Ij Akioh According to DIN 650: 6 × T-slots When making your inquiry, please specify the number of clamping angles required. *

Condition: new, Year of construction: 2014, operating hours: 46 h, load capacity: 300 kg, lifting height: 1,850 mm, fuel type: electric, mast type: duplex, construction height: 1,500 mm, Manufacturer + model: LINDE L 16 (372) Mast: 2W1850 + KAUP / Drum clamp ID: 23032.5921 Category: Demo Mast: 2W1850 Lowered height: 1500 mm Rcsdpfszut Tdsx Akijh Lifting height: 1850 mm Year: 2014 Hours: 46 Capacity: 24 V / 345 Ah Options: Equipped with a SELF-SUPPORTING drum clamp -> KAUP 0.8 R405 Drum clamp reach = 450 to 850 mm

Condition: used, color: white, Equipment: crane, Link-Belt RTC-80100 II Rjdpfxjzk Icfo Akisch

Condition: used, Year of construction: 2020, ---- Standard configuration Boom: 40m Rodpfoz Hh Ttjx Akiech Hoisting mechanism with frequency converter Radio remote control Outrigger system complete for stationary use only Rotating platform extension Lighting transformer: 4.7 kVA Slewing and trolley travel limiters 14 ballast plates, each weighing 2.0 tons

Condition: used, functionality: fully functional, Year of construction: 2009, load capacity: 7,500 kg, empty load weight: 1,620 kg, construction height: 1,200 mm, Paper roll clamp Load center: 650 Rcjdez Ev Enopfx Akioh ISO class: ISO Class 4 = 5,000 - 10,000 kg Condition: Ready for use and fully functional Technical condition: very good Description: Arm height: 1x 1290 mm, 2x 515 mm, Opening width 420 / 1,300 mm, Rotation range 360 degrees, continuous Arm height: 1x 1290 mm, 2x 515 mm, Opening width 420 / 1,300 mm, Rotation range 360 degrees, continuous

Condition: used, Used Bode - T-slot clamping table Length x Width x Height = 6500 x 1500 x 300 mm Rcjdpoxqpf Usfx Akijh The table has a small damage at the end (see photos)

Condition: used, functionality: fully functional, Year of construction: 2021, load capacity: 5,000 kg, opening width: 3,100 mm, Bale clamp Rcedsz R Ht Iopfx Akioh ISO class: ISO Class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: good Description: ISO 4A (61 cm) Capacity 5000 kg Opening range 700-3100 mm Width 2100 mm Clamps 1800 mm ID OS2144

Condition: used, Year of manufacture: 2019 Lifting capacity: 150 kg Please contact Gebrauchtgeräte Center for more information Rsdezfn Dlopfx Akiech