Used Clamping Chuck for sale (11,782)

Condition: used, Year of construction: 1990, Lifting capacity 2,5 t weight of the machine ca. 80 kg +++++ Please note: Gjdpfx Afjd N Suxsiokd The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, accessories -Clamping tool: clamping bracket, various designs -Groove: 27 x 85 mm -Price/Delivery: complete Gkedpoxrnb Dofx Afiod -Transport dimensions: 480/460/H45 mm -Total weight: 39.7 kg

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Maximum turning length with chuck: approx. 300 mm Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Gsdpfx Afewz Rifsijkd Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz - Electronic handwheel - USB, LAN data interface + CF card - Drum turret with 12 tool stations - Hydraulic 3-jaw power chuck, Ø 215 mm - Infinitely variable spindle speed - Coolant unit - Chip conveyor with rear discharge + basic chip cart Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.

Condition: used, Outer diameter: 60 Gkedpjxvchmsfx Afiod drilling: 50 mm length: 100 mm material: steel number of revolutions: max. 9,000 rpm

Condition: good (used), Internal Article No.: 25013 Leadscrew and Feedshaft Lathe Gksdpfowdu R Sox Afisd Nardini MS 175E Year of manufacture: 1986 The machine is equipped as follows: + 3-jaw Röhm chuck 160 mm - Multifix tool post incl. 2 x tool holders - MK3 drill chuck - 2 x revolving centre - Operating manual / electrical wiring diagram - Collet chuck 185E, incl. one collet - 2 x steady rest - Chuck flange - 6 machine feet Technical data: Centre distance: 800 mm Centre height: 175 mm Tailstock quill: MK3 Tailstock quill travel: 130 mm Total power requirement: 4.8 kW (380V / 16A) Spindle nose: DIN 55022 / Size 5 Spindle bore: 46 mm Speed range: 25 - 2000 rpm Bed width: 220 mm Dimensions (LxWxH): 220 x 150 x 120 cm Weight: approx. 1000 kg The machine is fully functional and can be inspected under power by prior arrangement.

Condition: used, Year of construction: 1990, total width: 1,100 mm, total length: 3,400 mm, total height: 2,450 mm, - Year: 1990 - Documentation available: No - Serial number: 90002 - Main motor power [kW]: 0.7 - Press drive: Hydraulic - Max. clamping width [mm]: 2900 Gsdpfxewxr Nuo Afijkd - Max. clamping height [mm]: 2000 - Number of cylinders [pcs]: 5 - Options: Horizontal/vertical cylinders separately controlled - Transport dimensions: 3400mm x 1100mm x 2450mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1990, length 600 mm width 400 mm Gkodpfx Afofgv Ddoiod height 100 mm weight of the machine ca. 200 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment -Tapping chuck: MK2 mount -Cutting performance: Gkedoxrmp Tepfx Afied -Bore: Ø 10 mm -Dimensions: Ø 55 x 200 mm -Weight: 1.4 kg

Condition: used, Automatic lathe, turning machine with copy attachment UMA Type F1 NK 60 Copy lathe for chuck parts Machine no. 28-0031 Year of manufacture: 1971 Maximum turning diameter: 150 mm Gkjdpfx Afsib D H Reied Swing diameter over bed: 400 mm Turning length: approx. 200 mm Spindle bore in machine spindle: approx. 42 mm Spindle speeds: 580 / 930 / 1480 / 2380 rpm, 4 steps Main motor power: 5.5 kW Electrical connection: 380 Volt, 50 Hz - Spindle flange for chuck mounting, short taper 55021, size 6, flange outer diameter Ø 180 mm - Spindle speed via 4 gearbox steps - Hydraulic clamping device with expanding mandrel, without spindle bore, clamping diameter Ø 15 mm - Right side with copying slide, copying unit SAUTER Type KMCA 61, with hydraulic feed movement - Left side with cross slide with hydraulic feed movement - Coolant system mounted below the machine bed - Hydraulic unit positioned behind the machine - Operating manual, electrical diagram, hydraulic diagram Space requirement automatic lathe with hydraulic unit (L x W x H): 2900 x 1900 x 1700 mm Space requirement automatic lathe (L x W x H): 2400 x 1900 x 1500 mm Space requirement hydraulic unit (L x W x H): 1400 x 850 x 1700 mm Weight automatic lathe: 2400 kg Weight hydraulic unit: 400 kg Total weight with pallet: 3000 kg In good condition

Condition: excellent (used), functionality: fully functional, We are offering a used EROWA UPC chuck here. ER-016841. Gjdpfjxqnqvex Afiskd The UPS chuck is in very good condition and fully functional. Viewing possible by appointment Shipping and viewing possible!

Condition: good (used), Internal article no.: 25062 5x Erowa zero-point clamping systems Including: Magnetic plate 320 x 320 4x zero-point clamping systems 140x140 Magnetic chuck D200 Four-jaw chuck D250 Vise BB125 Gedpexdlw Hofx Afiskd Clamping plate rear side: Locating pins 4 pcs. Spacing: 150mm Total pin length: 39mm Pin diameter top: 27mm Pin diameter bottom: 22mm

Condition: used, Trabo WSB33 Net locking dimensions: 3680*2700mm. 6 hydraulic jacks in two groups Electric operation Module dimensions 980x980 mm Installation angle 70-81° or horizontal Gkjdpfswnh D Hjx Afijd Diameter holes 25 mm Pitch of the holes 122.5 mm Height of the stop strip 130 mm - Documentation available: No - Serial number: 104790/0007 - Press drive: Hydraulic - Max. clamping width [mm]: 140 - Max. clamping height [mm]: 2500 - Max. clamping depth [mm]: 3400 - Number of cylinders [pcs]: 3 - Options: Remote control, Horizontal/vertical cylinders separately controlled Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1990, length 3300 mm Gkjdpfowm Rp Ajx Afied width 1800 mm height 1800 mm weight of the machine ca. 3,2 t

Condition: good (used), live center, live center, live morse taper, live center, live lathe center, live center, centering cone, centering ball, centering mandrel, centering chuck, pipe centering chuck, live centering chuck Gkedpfx Asxrlvljfiod -Manufacturer: Kondamat, centering chuck pipe centering chuck -Recording: MK4 -Dimensions: see photos -Dimensions: Ø 78 x 230 mm -Weight: 2.7 kg

Condition: good (used), Internal item No.: 18054 HSK-A50 Shrinking Chuck 50 PCs. Gsdsdxpucjpfx Afijkd Manufacturer: E.g. Haimer / FH / SK Schüssler-Gewefa Type: including 6 x 80 / 8 x 80 / 16 x 95 / 12 x 90 / 10 x 85 / 6 x 120 Differential taxation according to § 25a Ust.Ges. There are other, different holders in stock. About 700Stk.

Condition: used, Price: On request Hydraulic Pegboard press Van Duin. Confinement size 4500 * 3000mm 7 cylinders. Transport dimensions: 4500x1300x3510mm (LxBxH), 2000kg. - Documentation available: No - Serial number: 1272595 - Max. clamping width [mm]: 4500 - Max. clamping depth [mm]: 3000 - Number of cylinders [pcs]: 7 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Gkedpfxownhd Ts Afisd Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1970, table length 2200 mm Gedpfx Aeudc Twefijkd table width 115 mm table load 600 t weight 3 t 2

Condition: good (used), live center, live center, live morse taper, live center, live lathe center, live center, centering cone, centering ball, centering mandrel, centering chuck, pipe centering chuck, live centering chuck -Manufacturer: Kondamat, centering chuck pipe centering chuck Gkjdexrlt Ropfx Afijd -Recording: MK4 -Dimensions: see photos -Dimensions: 200/200/H285 mm -Weight: 10.1 kg

Condition: used, Year of construction: 2001, total width: 800 mm, total length: 3,300 mm, total height: 3,200 mm, Empty weight: 1.000 kg Trabo WSB33 Net locking dimensions: 2700*2700mm 6 hydraulic supports in two groups Mobile ladder with guide rail mounted on the bench Dimensions module 980x980 mm Installation angle 70-81° or horizontal Diameter holes 25 mm Pitch of the holes 122.5 mm Height stop strip 130 mm - Year: 2001 Gkjdpfx Afjwnhldsied - Documentation available: Yes - CE marking present: Yes - Serial number: 33009012 - Main motor power [kW]: 1.1 - Max. clamping width [mm]: 2700 - Max. clamping depth [mm]: 2690 - Options: Remote control - Transport dimensions: 3300mm x 800mm x 3200mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outside: Ø 130 mm -Bolt circle: Ø 75 mm -Hole: short cone 3, cone Ø 51 - 53 mm -Dimensions total Ø 130 x 50 mm Godoxrlfgspfx Afiekd -Weight: 1.4 kg

Condition: used, Hydraulic Pegboard press Godpfx Afswng Htoijkd Van Duin. Confinement size 4000 * 2500mm 5 cylinders Transport dimensions: 4550x1300x3030mmm (LxBxH), 2000kg. - Documentation available: No - Max. clamping width [mm]: 4000 - Max. clamping height [mm]: 2500 - Number of cylinders [pcs]: 5 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outside: Ø 200 mm -Bolt circle: Ø134 mm Gedpfx Afoxrk T Neiokd -Hole: short cone 6, cone Ø 101 - 106 mm -Dimensions total Ø 200 x 145 mm -Weight: 7.6 kg

Condition: good (used), Clamping angle, clamping aid, clamping angle for workpiece clamping Gkedpfsxrkquex Afisd -Clamping angle: clamping aid for workpiece clamping -Clamping surface: width 470 mm, holes M16 -Dimensions: see photos -Dimensions: 560/470/H405 mm -Weight: 62 kg

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 1000x800 mm, height 1250 mm -Wall thickness: 90 mm -T slots: slot width 36 mm -Dimensions: see photos -Dimensions: 1000/800/H1250 mm Gjdpfx Aexrgbpofiskd -Weight: 1069 kg

Condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -Quantity: a 2nd plate is still available ID21154 -Clamping plate with: a carriage with clamping device -Car dimensions: 1450/810/H1120 mm -Weight: 490 kg -Width: 1465 mm -Length: 4930 mm -Working height: 850 mm -Plate thickness: 35 mm -Plate height: 300 mm -Plate with: support ribs -Groove width: 52 mm -Groove spacing: 292 mm Godpfed Ehfmsx Afijkd -Transport dimensions: 4930/1670/H850 mm -Weight: 5900 kg