Used Clamp Bracket for sale (10,281)

Condition: good (used), clamping plate, welding table, welding table, straightening plate, straightening table -Clamping plate: with base frame -Clamping surface: 4400 x 2200 mm -Table height: 875 mm -Plate thickness: 30 mm -Flatness: see photos (straightening sheath not included) Csdpfx Aev E Edmec Terg -Transport dimensions: 4000/2200/H875 mm -Weight: 2222 kg

Year of construction: 2015, condition: good (used), functionality: fully functional, For sale is a HAIMER Power Clamp 2006 Economic NG including a HAIMER tool cooling unit. This system is ideally suited for shrinking and then rapidly cooling tool holders. Technical data: * Manufacturer: HAIMER * Type: Power Clamp 2006 Economic NG * Year of manufacture: 2015 * Serial number: 7105551 * Includes HAIMER AirCool tool cooling unit * 400-volt connection * Adapters SK40, SK50, HSK 63 Condition: The system is in good, used condition. Inspection and functional testing are possible by appointment. Shipping is possible. Credpfx Aozwptfec Teg Please contact us if you have any questions or would like to see a functional video. Note: The sale is made by a commercial seller. The stated price includes the statutory value-added tax. You will, of course, receive an invoice with the VAT shown. Subject to change, prior sale, and errors.

Condition: used, Technical details: height: 1600 mm width: 1270 mm depth: 1000 mm 2 pieces clamping angle available ( Priece per piece) T-slot according to DIN 650 a=35mm; b=60mm; c=27mm; h=65mm * Cedpfx Aeu N Ea Hoc Tsrg

Condition: excellent (used), Electro-permanent magnetic clamping plate 500 × 300 mm EPEFINE2 incl. control unit – sinker EDM / EDM Electro-permanent magnetic clamping plate, type EPEFINE2, including the corresponding control unit. Technical data: Magnetic clamping plate approx. 500 × 300 mm Crjdpfx Acjzyq Upj Tog Fine transverse pole spacing 5 mm Voltage 360 V DC Design for sinker EDM / EDM with special seal, special cable and special cable gland Polarity reversing control unit, type BUR-20 for EP system Magnetization/demagnetization Machine interlocking System installed in 2017; the original new price of all items at the time was €6,327 net / €7,529.13 gross, including transport. Inspection and collection possible by arrangement. Shipping/freight forwarding by agreement.

Condition: used, Year of construction: 2000, length 800 mm width 1000 mm height 1300 mm total power requirement 0 kW weight of the machine ca. 900 kg Csdpfx Aceznndqo Tjrg dimensions of the machine ca. 800 x 1000 x 1300 mm

Condition: used, Year of construction: 2000, length 800 mm width 800 mm height 1000 mm total power requirement 0 kW weight of the machine ca. 700 kg dimensions of the machine ca. 800 x 800 x 1000 mm Crjdpfx Aoznnd Dec Tog

Condition: new, diameter 400 mm amount 1 STK weight 70 kg 4-jaw lathe chuck, presumably from Homge -> Made of solid, precision-machined steel and designed for use on heavy-duty lathes. The robust construction ensures Cjdpfx Acozu Tgke Terg high clamping forces, concentricity, and secure workpiece clamping even under demanding machining conditions. The total weight is 70 kg, which is why it should only be handled using suitable lifting equipment. -> Diameter 400 mm — generously sized clamping surface for a wide range of workpiece sizes -> Four-jaw clamping system — individually adjustable jaws for precise alignment -> Max. speed 630 min?¹ — suitable for heavy-duty machining tasks -> High-strength steel body — low vibration, durable, dimensionally stable -> Concentrated guide grooves — ensure concentricity and reliable power transmission -> Serrated clamping jaws — high holding force for various workpiece shapes -> Weight 70 kg — requires a crane, hoist, or suitable lifting device -> Industrial design — designed for continuous operation and heavy loads

Condition: ready for operation (used), Allmatic NC 125 High-Pressure Vice Jaw width: 125mm Clamping width: 214mm With base plate for vertical work. Total length without base plate: 450mm Total length with base plate: 505mm Height: 145mm You are welcome to come by for a viewing. We are happy to arrange a cost-effective shipping service for you. You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description purposes. Credpfx Acewc At Ej Tsg Deviations from technical specifications and errors in the description of the item may occur and are reserved.

Condition: used, For sale is a welded T-slot angle bracket for clamping workpieces on a drilling machine. Crsdpfoznv E Nsx Ac Tsg Dimensions: Leg lengths 1500 x 850 Width 1400

Condition: used, Technical details: Length: 400 mm width: 200 mm height: 150 mm weight of the machine approx.: 63 kg DIRECT CURRENT MAGNET Magnet core 8 pieces width x distance: 40 x 45mm Codpfou N Dr Iox Ac Tsrg *

Condition: new, machine/vehicle number: Bestratingsklem_hydraulisch, The hydraulic treadmill is mounted very quickly and easily on the Optimas boom or with the appropriate quick-change device on a carrier (e.g. Excavator) and is ready for use. Possible extras such as. e.g. the optional rotary gear (360°) and other technical details will be clarified before delivery. The curbs are taken directly from the packaging and then set. The previous distribution of curbs is eliminated. Not only are high labour costs reduced, but heavy physical work can also be reduced to a fraction. Simple operation ensures huge hourly performance. The pavement cutter is suitable both for setting concrete and granite as well as for setting sinks (up to 7 pieces in one operation). Crjdegdyciopfx Ac Tsg

Condition: good (used), Welding table with rotating fixture (custom-built) Tabletop: 2000 x 1000 mm Working height: 640 mm Thickness: 28 mm Weight: approx. 1500 kg Credpofhnv Ajfx Ac Tjg Fixture is bolted to the tabletop! Fixture can be moved by motor over a distance of 500 mm Overall height: approx. 1750 mm Length: 2700 mm

Condition: ready for operation (used), Schunk Tribos SVP2 Clamping Device – Quick-Change System You are welcome to visit us for a demonstration. We would be happy to arrange cost-effective shipping for you! You will receive a proper invoice. Crodpfozyrczsx Ac Teg For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and browse our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: good (used), diameter 250 mm amount 1 STK weight 37 kg Pratt Burnerd 6-jaw self-centring chuck (6 Jaw Griptru Scroll Chuck), Ø 250 mm – catalogue number 1260-02505. -->> Special feature of the 6-jaw chuck: Technical data – Specifications Type: 6-jaw self-centring chuck --> Model: l1260-02505 Crjdpfszupmtsx Ac Tsg --> Outer diameter: 250 mm --> Number of jaws: 6 --> Through bore: approx. 75.9 mm --> Centring recess: 200 mm --> Mounting: 3 × M12 on 224 mm bolt circle --> Design: Rear mounting / Plain Back --> Clamping system: Scroll chuck (self-centring) --> About the model number

Condition: like new (used), number 7 Stück weight 3,75 kg/Stück range L-W-H 175x 75 x 130 mm Multi Quick MQ 110 Set – (Item No. 110-091-2022 – Clamping force 40 kN) This infinitely adjustable clamping element is characterised by maximum horizontal and vertical adjustability thanks to an integrated support plate. Applications include plastics technology, machining and metal forming. --> high clamping force --> low tightening torque Price per unit, discount for bulk purchases Credpfszuplvsx Ac Tog

Condition: good (used), weight 35 kg amount 1 STK tension force 40 kN Röhm NC Compact Clamp RKK With standard jaws SA and normal jaws SGN—optimized for maximum working precision on CNC milling machines and machining centers with very high working precision. Size 1: Mechanical-hydraulic clamping system. Sizes 2-5: Mechanical- mechanical clamping system. Drive spindle with clamping force presetting, deformation-resistant design for maximum clamping accuracy, mounting thread for workpiece stop, clamping surface for clamping claws, With grease nipples on both sides, all guides subject to wear and the spindle thread can be lubricated Crsdpfx Acszuplpe Tsg quickly and easily—Stable steel base body and all guides are hardened and ground on all sides, Size 1: Long clamping slide with cross offset, hardened on all sides, functional surface ground, Size 2-5:

Condition: used, functionality: fully functional, 4 used adjustable wheel clamps for recovery crane, etc., fully functional. No shipping possible. Please do not send email enquiries! Crodpfszwk Ttex Ac Teg If you have any questions, you can reach us by phone. Viewing and collection only by prior telephone appointment. Subject to changes, prior sale, and errors. We are a member of the Federal Association of Independent Motor Vehicle Dealers (BVfK) and carry the BVfK quality seal!

Condition: new, Year of construction: 2014, operating hours: 46 h, load capacity: 300 kg, lifting height: 1,850 mm, fuel type: electric, mast type: duplex, construction height: 1,500 mm, Manufacturer + model: LINDE L 16 (372) Mast: 2W1850 + KAUP / Drum clamp ID: 23032.5921 Category: Demo Mast: 2W1850 Lowered height: 1500 mm Lifting height: 1850 mm Year: 2014 Hours: 46 Capacity: 24 V / 345 Ah Options: Equipped with a SELF-SUPPORTING drum clamp -> KAUP 0.8 R405 Crjdpfx Ajzut Tdjc Tog Drum clamp reach = 450 to 850 mm

Condition: used, Year of construction: 2005, functionality: fully functional, RAKO 12-Jaw Precision Clamping System Ø 1,600 mm with Extensive Jaw Set (2 units in stock) Manufacturer: RAKO GmbH, Gelenau Manufacturer's designation: 12-Jaw Chuck Year of manufacture: 2005 Documentation date: 2006 Drawing number: 0684.00-00 Article number: MPT-1023 / 1024 Offered is a used, stationary RAKO 12-jaw precision clamping system for mounting on a fixed machine table. The clamping system was used for machining brass cages for ball and roller bearings. It is not a conventional turning chuck for a machine spindle, but rather a permanently mounted workpiece clamping device. The design features twelve basic jaws arranged radially and evenly around the circumference. This distributes the clamping force over numerous contact points. This clamping principle is particularly suitable for large, ring-shaped, thin-walled, sensitive, or easily deformable workpieces. According to the existing manufacturer's drawings, different jaw positions are possible for internal and external clamping. The clamping system has an outer diameter of approximately 1,600 mm and a weight of approximately 2,000 kg. Scope of delivery - RAKO 12-jaw clamping system, Ø approx. 1,600 mm - twelve radially arranged basic jaws - extensive set of various clamping and adapter jaws - different interchangeable and clamping elements - additional fastening and accessory parts as shown in the images - separate wooden crate with jaws and accessories - original RAKO operating manual - overall, section, and detail drawings - drawings of various clamping positions The exact quantity and assignment of all jaws and accessories have not been finally determined. The scope of delivery is based on the images. Condition Used condition with signs of wear and tear due to age and use. Scratches, dirt, discoloration, and, in some places, slight surface rust or corrosion can be seen on the clamping system and individual accessories. Technical data - Outer diameter: approx. 1,600 mm - Weight: approx. 2,000 kg Crodpfxezx D A Do Ac Tog - Number of basic jaws: twelve - Jaw arrangement: radial and even - Clamping options: internal and external clamping - Jaw stroke: 28 mm according to drawing - Total clamping force: approx. 190 daN at 35 Nm actuating torque - Maximum torque on the actuating spindle: 100 Nm - Locking air: present - Maximum locking air pressure: 5 bar - Lubrication: on the twelve basic jaws and the actuating spindle - Transport: three threaded holes M30 for crane screws Mounting on the machine table According to the RAKO operating manual, mounting is done with 14 cylinder head screws M20 × 180 according to DIN 912, strength class 10.9. The specified tightening torque is 300 Nm. Jaws and accessories The scope of delivery includes an extensive range of different clamping and adapter jaws. Documented, among other things, is an adapter jaw H41 with drawing number 0721.02-03 and a finished size of 55 × 50 × 46 mm. Dimensions of clamping system: approx. 1,600 × 1,600 mm Height: to be determined Weight: approx. 2,000 kg Total shipping weight: over 2,000 kg plus accessories and packaging

Condition: used, functionality: fully functional, overall weight: 5,000 kg, plate width: 1,200 mm, plate length: 1,200 mm, Equipment: type plate available, AMF Zero Point System – Clamping System with Zero Point Clamping Plates, Consoles, Hydraulic Unit, and Accessories Manufacturer: AMF System: Zero Point System Year of Manufacture (Components): Primarily 2013 / 2014 Offered is a comprehensive AMF Zero Point clamping system from industrial use. The system consists of several hydraulic zero point clamping plates, zero point clamping consoles, round changeover and clamping plates, intermediate flanges, adapter elements, an AMF high-pressure hydraulic unit, and extensive AMF clamping and system accessories. The components come from a cohesive clamping and machining system and are suitable for creating flexible workpiece, fixture, and pallet clamping systems on machine tools and machining centers. Individual sale of the components is possible. The existing system includes, among other things: - 1 × AMF Hydraulic Unit, Part No. 515841 - 1 × Large quantity of AMF K20 Zero Point Clamping Modules and System Accessories - 2 × Hydraulic AMF Zero Point Clamping Plates approx. 1,200 × 1,200 mm - 2 × Sets of AMF Zero Point Clamping Consoles, each with 4 stations and a total of 8 K20 clamping modules each - 1 × Clamping Plate Ø 650 mm / 8 Clamping Slots - 1 × Clamping Plate Ø 650 mm / 16 Clamping Slots - 1 × Clamping Plate Ø 1,000 mm / 8 Clamping Slots - 1 × Intermediate Flange / Changeover Table Ø 800 mm - 1 × Semi-circular Clamping Device - Several intermediate and adapter rings - 1 × Large Intermediate Flange / Clamping Device Ø approx. 1,250 mm - Various AMF Clamping Modules, Clamping Studs, Height Elements, Couplings, and Hydraulic Lines - Existing technical documentation Key Technical Data: Hydraulic Unit AMF - Part No.: 515841 - Manufacturer No.: 0113 0469 - Operating Pressure: 40–400 bar - Flow Rate: 2.5 l/min - Supply: 400 V / 50 Hz - Motor Power: 1.1 kW - Separate cable-connected control unit - Hydraulic connections with quick-release couplings AMF Zero Point Stations 1,200 × 1,200 mm - Hydraulic actuation - K20 Zero Point Clamping Modules - Operating Pressure: 50–60 bar - Dimensions: approx. 1,200 × 1,200 mm - Weight: approx. 423–424 kg per plate - Years of Manufacture: 2013 / 2014 AMF Zero Point Clamping Consoles - 4 stations per set - 2 K20 clamping modules per station - A total of 8 K20 clamping modules per set - Hydraulic actuation - Operating Pressure: 50–60 bar - Console Height: approx. 143 mm Changeover and Clamping Plates Various designs with: - Ø 650 mm - Ø 800 mm Crjdpfx Acszx Akas Teg - Ø 1,000 mm - Ø approx. 1,250 mm - Radial T-slots - AMF Zero Point Clamping Modules - Underside clamping studs - Various adapter and mounting options Condition: Used, industrial condition. The components show the usual signs of wear, clamping, mounting, and storage. Some dirt, discoloration, and minor superficial corrosion marks are present. Some of the AMF system accessories are still in their original packaging or appear to be unused. A current functional, leak, or accuracy test of the hydraulic and pneumatic components has not been performed. Sale in the existing condition and scope of delivery as shown in the images. Inspection is possible by appointment. Individual sale is expressly possible.

Condition: used, Technical details: Crsdpfx Acovfduwe Teg length: 1200 mm width: 500 mm height: 1260 mm

Condition: excellent (used), Mounting plate, scribing plate, measuring plate, measuring table, straightening plate, scribing plate, test plate, inspection plate, precision measuring table -Clamping surface: 3000 x 2000 mm -Quantity: 3 mounting plates available -Price: per piece -Note: The mounting plates can be screwed together end-to-end, as the end faces are milled. -Possible clamping surfaces: 3x 3000 x 2000 mm (1x 9000 x 2000 mm) (1x 6000 x 3000 mm) -Sheet thickness: 60 mm -Plate: with supporting ribs Codpsw Dzk Eefx Ac Tjrg -Dimensions each: 3000/2000/H360 mm -Weight: 4500 kg/unit

Condition: used, Cast iron clamping cube 2 faces Length: 1000 mm Height: 600 mm Depth: 800 mm T-slots dimensions: 38 x 22 mm Weight: approx 600 kg Cjdpfx Acezwxh Ss Terg

Condition: good (used), Cast iron clamping cube Length: 1290 mm Width: 920 mm Height: 510 mm Cedpfxozwxh Es Ac Tsrg T-slots dimensions: 42 x 25 mm 2 faces slotted Weight: approx 1 T

Condition: used, Cast angle plate Width: 640 mm Height: 400 mm Depth: 320 mm Slots dimensions: 100 x 24 mm Cjdpfxszwxhlo Ac Tsrg Weight: 110 KG