Used Chop Saw Miter Saw for sale (5,651)

Condition: used, cutting diameter 320 mm saw band length 6300 mm cutting range 420 x 320 mm control Siemens Simatic HMI cutting speed 20 - 130 m/min height of material-table 950 mm total power requirement 15 kW weight of the machine ca. 2920 kg dimensions of the machine ca. 6,35 x 6,76 x 2,41 m Machine overhauled by Kasto in 2016 Equipment/accessories: Cgodpfxoxb Eduo Agzjp - Cutting feed continuously adjustable - Pneumatic connection 6 bar - Coolant 75 l - Pump capacity 40 l - Roller conveyor - Chip conveyor - Technical documentation

Condition: used, Year of construction: 2016, cutting diameter 430 mm saw band length 6830 mm cutting range 430 x 430 mm control Siemens Simatic HMI cutting speed 80 m/min height of material-table 700 mm dimensions of the machine ca. 5,36 x 6,83 x 2,41 m Cjdpfx Asxb Edzsgzogp total power requirement 25 kW weight of the machine ca. 4920 kg Equipment/accessories: - Infinitely variable cutting feed rate - Pump capacity 75 l/min - Roller conveyor - Chip conveyor - Technical documentation

Condition: excellent (used), Table saw with sliding table TKU 315 - 220 volts - Blade diameter: 315 mm - Year of manufacture: 1992 Cgsdeypm I Sjpfx Agzop Subject to differential taxation

Condition: excellent (used), F45 Pro Drive - Year of manufacture: 2017 - Upper control panel - 3200 mm - Saw blade diameter: 500 mm - 5.5 kW - Scoring unit preparation - Digital display on parallel fence - Cutting width 1100 mm to the right of the blade - Paper template holder Codeypmqaepfx Agzjgp - Angle display on cross-slide - Duplex mitre gauge

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Features and technical data: Cutting height 2200 mm x cutting length 5300 mm (Edging height / max. horizontal cutting height 2110 mm) PowerPackage 400 V The package consists of the following options: 1. TRK extraction unit 2. SuperCut scorer 3. Vertical digital display 4. Stepless speed control (9 kW output) Pneumatic aluminum slatted support Medium workpiece support on all fields Csdsynpc Aepfx Agzegp Strip stop for recurring horizontal cuts Digital measurement display for horizontal cut at control panel Visible cut line laser Paper storage compartment Narrow parts device (2 pieces) Location: Solingen Availability: Short-term

Condition: used, Year of construction: 1977, roll diameter 320 mm throat 310 mm workpiece height 230 mm table-size 505 x 505 mm cutting speed 12 - 375 m/min turning speeds U/min saw band length 2 mm voltage 400 V total power requirement 1,3 kW weight of the machine ca. 420 kg dimensions of the machine ca. 0,80 x 0,80 x 1,65 m Cedovnv S Tspfx Agzjgp - serial-no.: 22600-77/14 - with stepless feed - welding equipment IDEAL - grinding wheel - machine lamp

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Cutting length: 4,300 mm Program pusher travel: 4,400 mm Saw blade projection: 90 mm Main saw motor power: 11 kW Scoring saw motor power: 2.2 kW * Automatic main saw cutting height adjustment according to panel stack height * Controlled opening of the pressure beam * Quick-change system for main and scoring saw blades (QUICK CHANGE) * Grooving device with main saw - electronic adjustment * "DIGISET" - electronic adjustment of the scorer to the main saw from the operator panel * Side alignment unit integrated into the saw carriage * Cycle start button located next to the third air flotation table * Automatic measuring of workpieces for cutting sequences and manual cuts Cgodpfx Aoypi Disgzsp Equipment: ----- 4 air flotation tables with rounded front edges 9 grippers 11 roller supports in the program pusher area Electrical requirements: 400 V, 50 Hz, 3 phase Control: WINDOWS PC with OSI PLUS software * OS Labelling - label printing software * OPTIPLANNING optimization software for office workstation Additional accessories: * Label printer on the machine

Condition: good (used), Year of construction: 2003, Horizontal bandsaw fully automatic with gripper feed Cutting capacity 90° round: 400 mm square: 400 x 400 mm Cutting speed: 15 - 90 m/min Working height: 800 mm Saw blade dimensions: 4570 x 41 x 1.3 mm Material feed per stroke: 560 mm Multiple feed: up to 9 times = 5040 mm Motor power: 5.5 kW Dimensions (L x W x H): 2250 x 2850 x 1700 mm Cjdeynaz Nspfx Agzegp Weight: 2500 kg Accessories / Special features: • Fully hydraulic: workpiece clamping, saw feed, bow lifting, and material feed • Gripper feed system • Screw conveyor swarf remover • Fully automatic operation or single cuts • Automatic bow lifting height adjustment according to material diameter • Max. cut length: 560 mm with single feed • 5040 mm with multiple feed • Hydraulic clamping pressure regulation for the vise • Saw band guidance via deflection rollers and carbide jaws • Constant saw band tension with automatic shutdown in case of blade breakage • Coolant system • Piece counter • Emergency stop switch • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 2022, operating hours: 105 h, Sliding table panel saw with a movable carriage and saw blade tiltable up to 46°, designed for safe operation and requiring 50% less space compared to a conventional sliding table saw and beam saw combined. Simple and fast programmed adjustments via the "Ready" control from the operator panel. Immediate positioning is ensured by a motorized and programmable rear fence, providing fast and precise workpiece alignment. Robust and reliable telescopic fence with scale and two flip stops: Panel cutting up to 2500x3200 mm (optionally 3200x3200 mm). The large fixed table ensures optimal support of the panel during processing. Technical data Class: px 350i Max. sliding carriage travel [mm]: 2600 / 3200 / 3800 Saw blade tilting range [°]: 0÷46 Max. saw blade diameter (cutting) [mm]: 350 Max. saw blade diameter (milling + cutting) [mm]: 300 Max. cutting height (D350) from table at 90°/45° [mm]: 105/72 Max. cutting height (D300) from table at 90°/45° [mm]: 80/50 Saw blade rotation speed [rpm]: 4000 Cutting width at rear fence [mm]: 1300 Other technical features: Three-phase motor: 7 kW, 50 Hz Extraction hood diameter [mm]: 120 (1) - 100 (2) Dimensions [mm]: L 3859, H 1368 Csdpoyb T Trefx Agzsgp Location: ex works customer - Available at short notice -

Condition: good (used), Metal band saw, band saw machine, band saw, vertical band saw -Manufacturer: Mössner Rekord, vertical band saw type SM/420 with saw band welder -Cutting width: max. 400 mm -Cutting height: max. 230 mm -Motor power: 1.1/1.7 KW -Voltage: 380 volts, 50 Hz, 4.6/3.6 A -Band saw: length 3150 to 3260 mm -Band saw speed: adjustable -Work table: pivotable in 2 axes: Codehvtcispfx Agzsgp -Band saw welder: Ideal BSO -Dimensions: 940/750/H1850 mm -Weight: 548kg

Condition: excellent (used), Bandsaw HOLZKRAFT Techno Max S45 N - used - tiltable table, upper blade guide, lower blade guide, cutting height adjustment via handwheel, operating pressure indicator ----- Technical Data ----- Wheel diameter: 450 mm, Max. cutting height: 305 mm, Max. cutting width: 435 mm, Table size: 600x520 mm, Blade length: 3,724 mm, Motor: 2.2 kW, Extraction port: 120 mm, Weight: 165 kg, Dimensions: 1,850x800x830 mm Cgjdpfsym Umqjx Agzjp Quality Information: - Blade run / imbalance checked - Band tires checked - Guides checked - Fully cleaned - Electrical system checked - Immediately ready for operation

Condition: excellent (used), Year of construction: 2011, Used horizontal panel saw Manufacturer: Holzma Model: PROFI HPL 430/43/22 Year of manufacture: 2011 Cutting length: 4300 mm Cutting width (program pusher travel): 4250 mm Roller rail (double track): 9 pieces Clamps: 7 pieces, first 3 are 2-fingered Air cushion table, width 650 mm: 4 pieces, each 2160 mm long Central blower: 1 unit with increased air output - 3 angled lift clamps (2-fingered) - 1 angled lift clamp (1-fingered) - 1st air cushion table: 800 mm wide - Speed package: -> Saw carriage feed: 1 – 150 m/min Cgjdpfsymx S Dsx Agzjp Technical specifications: Blade projection: 95 mm Saw carriage feed: forwards 25 m/min, reverse constant 90 m/min Automatic cutting height adjustment Angle pressure device, min. pressure width 0 mm; max. pressure width full cutting length Main saw motor: 18 kW, frequency controlled Scorer saw motor: 2.2 kW Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connection value with HS motor 18 kW: 28 kW Power Control CADmatic 4.0 control unit with 17" flat display Labeling with part graphics / label software / label printer PICA 104

Condition: good (used), Year of construction: 2000, Cold circular saw, metal circular saw, miter saw, circular saw, sawing system, underfloor saw, aluminum circular saw, semi-automatic aluminum circular saw, chop saw, glass bead saw -Manufacturer: Kaltenbach, Cold circular saw, metal circular saw with roller conveyor left/right -Type: KKS 400 E Semi-automatic without material feed -Saw blade: Diameter 400 mm -Drive power: 1.8 / 2.7 kW -Cutting area at 90 degrees flat: 305 x 20 mm / round Ø 130 mm -Cutting area at 45 degrees flat: 245 x 30 mm / round Ø 130 mm -Cutting range for square bars: 90° 120 mm / 45° 110 mm -Miter: swivels on both sides -Cutting speed: 13/26 m/min. -Saw blade feed speed: infinitely variable 0 - 1000 mm/min -Roller conveyor left: total 4000/345/H1000 mm -Roller conveyor right: total 6000/345/H1000 mm -Saw dimensions: 1150/930/H1765 mm -Overall dimensions: 10810/1150/H1765 mm -Total weight: 1190 kg Csdpfxsx Sdpyo Agzogp

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, saw blade diameter: 350 mm, total length: 1,020 mm, total height: 1,850 mm, total width: 810 mm, overall weight: 371 kg, type of input current: three-phase, rotational speed (min.): 37 rpm, rotational speed (max.): 74 rpm, input voltage: 400 V, IMET Sirio 350 3 Phase 400 Volt 2-speed motor runs flawlessly. Pneumatic vice with double clamping system. 37 & 74 RPM. Cedpsynugasfx Agzegp Miter cuts possible from -45 to +60 degrees. Maximum clamping capacity: 180mm Maximum saw blade diameter: 350mm Current blade diameter: 315mm Coolant pump mounted in the machine base. Emergency stop switch. Splash guard. Made in Italy. Year of manufacture: 1997 Overall dimensions: 102x81x185cm Weight: 371 KG Overall good condition! Contact us for shipping options! € 2,150.00

Condition: new, Band saw blade Make Röntgen Type bi-alfa cobalt Dimensions :4860 x 34 x 1.1 mm 3/4 Combi 10 unused, out of magazine Cgjdpfjrwl R Nsx Agzsp

Condition: used, Year of construction: 2003, saw blade diameter 510 mm cutting diameter 150 mm capacity 90 degrees: flat 450 x 150 mm capacity 90 degrees: square 150 mm Cgjdpfoyrhurex Agzsp turning speeds 29 / 58 m/min. total power requirement 4,2 kW weight 1,55 t range L-W-H 1,8 x 1,7 x 1,7 mm Long-cut cold circular saw, semi-automatic - with miter adjustment left 50°, right 60° - digital cutting angle display - hydraulically adjustable feed speed - hydraulic workpiece clamping - 4 spare saw blades

Condition: used, Year of construction: 2009, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 200x88 mm capacity 45 degrees: round 115 mm capacity 45 degrees: square 110 mm capacity 45 degrees: square 150x80 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,59 t dimensions 1,9 x 1,4 x 1,8 m Hydropneumatic Fully Automatic • Mitering Left/Right • Bevel cuts up to 45° (shifter) a. b. • Pneumatic double clamping device • Pneumatic vertical clamping device • Integrated coolant spray system MPS control: Cgedpfsyrhu Ssx Agzsp • Save cutting start/end position • Display of power consumption, piece count, cutting time, etc. • Adjustable water cooling • Cutting pressure regulator

Condition: new, capacity Ø 140 - 250 mm sawing motor 30 kW hydraulic motor 5,5 kW Saw Feeding Servo 3 KW Siemens Material Feeding Motor 3 KW Siemens Saw speed 30-80 rpm /min saw-blade dia. Ø750 x 3,8 x 3,2 x 80 mm cutting range min. 1000 mm Cgedpoymf Swjfx Agzop cutting range max. 7000 mm control Siemens hydraulic Rexroth Valve coolant Pulverisiertes Schneidöl required space 3500 x 8000 mm Saw speed 30-80 rpm / U pro min weight of the machine ca. 9000 kg GERD WOLFF GLS-250 High-performance circular Saw From 10 to 250 Millimeters round material, within seconds, they cut steal ofall kinds with precision an ease. Equipped with a material feed system and components from Germany, we combine german with turkish mechanical engineering.

Condition: new, capacity Ø 10 - 75 mm sawing motor 11 kW hydraulic motor 3 kW Saw Feeding Servo 1,5 KW Siemens Material Feeding Motor 1,5 KW Siemens Saw speed 70-160 rpm /min saw-blade dia. Ø285 x 2,0 x 1,7 x 32 mm cutting range min. 1000 mm cutting range max. 7000 mm control Siemens Csdpfx Agsymf Ifozegp hydraulic Rexroth Valve coolant Pulverisiertes Schneidöl required space 2950x6800 m weight of the machine ca. 3500 kg GERD WOLFF GLS-75 High-performance circular saw From 10 to 75 Millimeters round material, within seconds, they cut steal of all kinds with precision an ease. Equipped with a material feed system and components from Germany, we combine German with turkish mechanical engineering.

Condition: new, round material Ø 100 - 230 mm square edge steel Ø 100 - 170 mm Saw Body 30 Grad Linear Schlitten sawing motor 22 kW hydraulic motor 5 kW total power requirement 34 kW Saw speed 30-120 rpm /min saw-blade dia. Ø630 x 3,4 x 2,8 mm control Siemens hydraulic Rexroth Valve coolant Pulverisiertes Schneidöl required space 7,5 x 2 x 1,2 m required space 3200 x 7600 mm GERD WOLFF GLS-230 High-performance circular saw Introducing the new generation of High-Performance Metal Circular Saws, seamlessly blending precision and efficiency with German quality. Our High-Performance Metal Circular Saw machines are setting the standard in metalworking thanks to their innovative technology, allowing for precise and effortless cutting of steel of any kind. From 10 millimeters to an impressive 250 millimeters in steel diameter, our machines cut with utmost accuracy within seconds. At the core of these machines are their automatic functionalities, coupled with an advanced ball screw spindle and an automatic material feeding system. This combination ensures not only maximum precision but also impressive speed. A Siemens motor and Siemens PLC screen guarantee reliable performance and easy control. Moreover, our High-Performance Metal Circular Saw machines feature a special Cgjdpfeymf Tzex Agzep system for quick and convenient blade changes. The hydraulic material tension provides secure fixation of the workpiece during the cutting process. Additionally, a programmable misting system is integrated to ensure optimal lubrication and cooling of the saw blade, extending the tool's lifespan. With our servo and driver technology, you have full control over your manufacturing processes, allowing you to optimize production and achieve the highest quality standards. Choose our High-Performance Metal Circular Saw machines and embrace the future of metalworking – precise, efficient, and reliable.

Condition: new, saw blade diameter 550 mm Number of revolutions 3580 r.p.m hole of sawblade 32 mm Control NC total power requirement 3 kW weight of the machine ca. 250 kg required space 980 x 1130 x 1430 mm The Gerd Wolff AC 550 is an automatic aluminium cutting machine which is manufactured for our sales brand "GERD WOLLF Maschinenfabrik" by a renowned manufacturer from Türkiye. Schnittbereich 90° rund: 155 mm Schnittbereich 90° quadratisch: 155 x 155 mm Schnittbereich 90° rechteckig: 260 x 200 mm Schnittbereich 45° rund: 130 mm Schnittbereich 45° quadratisch: 130 x 130 mm Schnittbereich 45° rechteckig: 180 x 200 mm Codpfx Aoymf Tbegzsgp Standard Accessories - Location points for 15° – 22.5° – 30° – 45° – 67.5° - Fixing handle for locking at intermediate angles - Adjustable cutting speed for different types of profile - Saw covering with safety switch - Belt propulsion saw - Two hand safety operation - Easy to change saw blade - 2 x Pneumatic vertical piston with clamps - 1 x compressed air gun Optional Equipment - Hydrocheck – Hydraulic speed adjustment for aluminium profiles - Cooling system for aluminium cutting - Auxiliary conveyor with rulers

Condition: new, cutting diameter 570 mm saw band length 7250 x 41 mm cutting width 1,3 mm capacity 90 degrees: square 550 x 550 mm capacity 90 degrees: flat 550 x 700 mm total power requirement 4 kW weight of the machine ca. 6050 kg required space 2600 x 1300 x 3700 m The KLS 550 x 700 is a semi-automatic and column guided horizontal bandsaw. Standard specifications - Swarf Brush Cgsdpfeymf Sdex Agzsp - Hydraulic Blade Guide - Hydraulic Vice - Hydraulic Blade Tension - Blade Breakage Switch - Stop System - Automatic Ball Screw Lubrication - Led Lighting - Swarf Conveyor - Swarf Carrying - 1400 mm Feeding Drive - Double Roller Table - Material End Detector - Program Saving System - USB Connection Output - PLC Control & Touch Screen - Inverter Optional specifications - Laser Line - Lubrication Mist - V Shape Vice - Extra Double Roller Table - Upper Clamp System - Curve Cutting Detecting Sensor The pictures are for orientation only and do not represent a true-to-scale image of the machine.

Condition: excellent (used), Bandsaw PANHANS BSB630 -used- Swivelling table, APA blade guide top and bottom, Cutting height adjustment via handwheel, Operating pressure gauge ----- Technical Data ----- Wheel diameter: 630 mm, Max. cutting height: 320 mm, Max. cutting width: 600 mm, Table size: 680x780 mm, Table tilt: 20°, Blade length: 4,480 mm, Motor: 2.2 kW, Extraction ports: 2x100 mm, Dimensions: L=1,200 W=800 H=2,150 mm Quality Info: - Blade tracking / imbalance checked - Band tires renewed - Guides checked Cjdpeymn E Hjfx Agzogp - Wheels newly mounted - New belts - Complete basic cleaning - Electrics checked - Immediately ready for operation

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 566-06124, functionality: fully functional, Doall automatic bandsaw in good working condition. Cutting capacity round: 335 mm Year of manufacture: 2006 Cjdpfox A S Agox Agzjgp

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, KASTO bandsaw model SBA 320/500 AU DG in good working condition. Cutting capacity at 90°: approx. 320 mm, square 500 x 300 mm Cutting capacity at +45°: 320 mm, square 340 x 300 mm Cutting capacity at -45°: 320 mm, square 360 x 300 mm Cutting capacity at +60°: approx. 220 mm, square 200 x 200 mm Cutting capacity at -60°: approx. 250 mm, square 240 x 240 mm Cgjdpfx Agsyi Unaszsp Max. vice opening: 510 mm Saw band dimensions: 5090 x 34 x 1.1 mm