Used Chip Heat for sale (23,178)

Condition: good (used), Heat exchanger, cooling coil, cooling pipe, cooling spiral -Heat exchanger: cooling coil with fins -Dimensions: see photos -Material: aluminum -Transport dimensions: Ø65 x 365 mm -Weight: 0.5 kg Ibjdpfx Aaoikgd Hococ

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: AD082, Offered is a microwave unit from Fricke und Mallah Microwave Technology GmbH, manufactured in 2010. The machine is currently not in use. It is up to date with the latest safety standards and ready for operation. An inspection of the machine is possible upon request and by appointment. Ibedjxcnkaepfx Aacjc We are available for any further questions you may have.

Condition: ready for operation (used), Year of construction: 2016, Fuel: natural gas (NG), engine: HMG, space heating unit with CHP: yes, condensing boiler: no, additional heating unit: no, low-temperature boiler: no, B11 boiler: no, combi unit: no. Rated heat input P: 88kW, annual efficiency of the space heating system η: 136%, energy efficiency class: A++, usable heat output at rated heat input with additional heater switched off/on: 87.9kW, thermal efficiency at rated heat input with additional heater switched off/on: 57.5%, electrical efficiency at the heat output of the space heating unit with CHP with additional heater switched off/on: 33.5%, auxiliary power consumption at full load/part load el: 1.132kW, in standby mode P SB: 0.06kW, standby heat loss P stby: 0.442kW, annual energy consumption Q HE: 1345kWh, sound power level indoors L WA: 72dB, operating hours: 42,892h. Water was detected in the oil circuit, the unit has an oil-related fault despite sufficient oil being present, and it also shuts down with the message 'engine too hot'. The control unit was overhauled by the manufacturer in 2024, and regular maintenance intervals for oil changes, spark plugs, valves, etc. have been carried out. With documentation. Ibodsxc Ni Rjpfx Aacsc

Year of construction: 2001, condition: good (used), Ipsen TQ 27 line consist with ; Manufacturer : IPSEN 2 X TQ27 (1520X1220X910MM 1300KG/CHARGE ) MANUFACTURED YEAR : 1997/2001 ATHMOSPHERE : N2/METHANOL CONTROL : S7-300 / CARB-O PROOF HEATING : GAS / RECON3 BURNERS 2 X DL27-G PRE HEATING Ibsdpfxew Ugpgo Aacoc MANUFACTURED YEAR : 1999/2001 CONTROL : S5 1 X TIPPING STATION 2 X WASHING MACHINE 1 X ELECKTRIC HEATING 2010 1 X GAS HEATING 2010 CONTROL : S7-300 4 X TEMPERING FURNACE 2004 – 2010 – 2016 CONTROL : S7-300 1 X UNILOADER 2017 S7-300 WORK FOR BOTH SIDES BETWEEN – FURNACE LOADING, TILTING STATION, WASHING MACHINE AND TEMPERING FURNACE 1 X LOADER S7-300 ONLY ONE SIDE WORK

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 0790505, 1 X Rochman TR45/90H250 Heat Shrink Tunnel. The Rochman TR45/90H250 Heat Shrink Tunnel is a robust and essential piece of equipment designed to work seamlessly with an L-seal or side-seal shrink wrapper, this tunnel applies precise heat to shrink film tightly around items, ensuring excellent product presentation and protection. Technical specification: ⚙️ Manufactuer - Rochman ⚙️ Model - TR45/90H250 ⚙️ Machine number - 0790505 ⚙️ Year of manufacture - 2005 ⚙️ Power - 400V | 12-20Kw | 17-60A | 50Hz ⚙️ Weight - 394Kg General information and benefits: ✅ Optimal Shrink Performance: Engineered to provide uniform heat distribution, resulting in a smooth, clear, and wrinkle-free shrink wrap for a polished final product. ✅ Versatile Product Handling: The model designation (likely indicating aperture dimensions of approximately 45cm width, 90cm length, and 25cm height) suggests it can accommodate a good range of product sizes, from small individual items to larger multi-packs. ✅ Adjustable Controls: Typically features precise temperature control and adjustable conveyor speed, allowing operators to fine-tune the shrinking process for various film types and product characteristics. Iedpfow Evkcsx Aacobc ✅ Robust Construction: Built for durability and reliable operation in demanding production environments, ensuring a long service life. ✅ Enhanced Product Protection: Creates a secure, tamper-evident, and dust-proof package, ideal for transport, retail display, and extended shelf life.

Condition: used, Year of construction: 2009, Fröling Turbomat 500 – wood-chip biomass boiler (2009) ⚙️ Technical data • 🔹 Model: Fröling Turbomat 500 • 📅 Year: 2009 • 🔥 Nominal output: 450 kW (W40) • ♨️ Maximum output: 495 kW • 💧 Water content: 750 litres • 🧱 Operating pressure: 6 bar • 🌡️ Max. temperature: 110 °C • ⚖️ Weight: approx. 6 800 kg • 🏭 Manufacturer: Fröling Heizkessel- und Behälterbau GmbH – Austria ⸻ 🔩 Main features • ♻️ Fully automatic ash removal and heat-exchanger cleaning • 🔥 Four-layer, fireclay-lined high-temperature combustion chamber • 💦 Water-cooled feed channel – ideal for moist fuels • ⚙️ Moving grate for continuous and efficient combustion • 🌬️ Lambda control with multi-zone air regulation and low emissions • 🌀 Automatic draught and suction fan control • 🧰 Robust industrial design, easy to maintain • 🌲 Fuels: wood chips (G30–G50), pellets, sawdust, biomass ⸻ 💡 Advantages • ⚡ High efficiency, fully automatic operation • 🔧 Low maintenance, long service life • 🌫️ Reliable performance even with higher-moisture fuel Ibsdpexmrwfsfx Aacec • 🏢 Ideal for industrial and municipal heating systems ⸻ 📍 Location: Mosonmagyaróvár, Hungary

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 0 h, Item: A-11778-Pipe-Exchanger Stainless Steel Exchanger Iodpfx Aajqt Eimocobc Type PVE 3300 Max. Temperature:

Condition: used, Year of construction: 2013, Chip conveyor, manufacturer BMF - BÜRENER, with filter system and high-pressure pump. Chip conveyor dimensions: Neck width: 600 mm, neck height: 200 mm, conveyor length: 3000 mm. Iedpfx Aajiicnkjcsbc

Year of construction: 2008, condition: excellent (used), Plate heat exchanger APV H17 7.41 4.8nm2 800kw APV H17 MGJ plate heat exchanger /ct2227/ Manufacturer: APV Type: H17 MGJ 10.1 Year of manufacture: 2008 Heat transfer surface: 4.08nm3 Nominal power: 800kw Ibedpfxjwx Hz Se Aacec Width: 340mm Height: 1050mm Connection height: 137mm Depth: 60cm Pipe connection DN50,EN 1092 Capacity: Primary: 7.41Liter Secondary: 6.86 Max pressure: 10bar Test pressure 15.53 bar Max temperature: 110 °C Stainless steel pipe connections.

Year of construction: 2007, condition: used, Single-stage plate heat exchanger, previously used for wort cooling in a 15 hl brewhouse. Flow rate product approx. 10 hl/h. Inlet temperature 75°C, outlet temperature 20°C. Cooling water temperature approx. 13°C. Additional title: wort cooler Wort cooler capacity approx: 10 hl/h Content water: 4 l Ibjdpfsw Uczrex Aacec Content wort: 4 l Max. pressure: 10 bar Weight: 165 kg Material: stainless steel Position: premounted on frame Features: splash guard, plate heat exchanger, aeration via Venturi jet

Condition: used, Year of construction: 2025, A device for extracting aluminum chips and shavings (not aluminum dust), steel from machines and cleaning the workplace. The use of a side turbine makes the device ideal for connecting to machines where a large amount of chips is produced. It is equipped with a dust filter and a container (drawer) for pouring out the by-product. Machine characteristics Quick and easy filter replacement Large container for chips and shavings Quick access to the collection container Stably standing, compact housing Large container capacity Effective extraction Technical data ENGINE 0.75 kW VOLTAGE 400 V / 50 Hz SUCTION CONNECTIONS 1 x 100 mm EXTRACTION CAPACITY WITHOUT BAG 1800 m³/h EXTRACTION CAPACITY WITH BAG 1520 m³/h Isdpfx Aaewl Dn Ajcjbc ROTOR DIAMETER 350 mm DIMENSIONS 870 x 560 x 1170 mm WEIGHT 31 kg MACHINE USED: RETURNED, REPAINTED, VISIBLE SIGNS OF PAINT, 100% OPERATIONAL

Condition: used, functionality: fully functional, total length: 13,100 mm, total height: 4,600 mm, total width: 2,550 mm, cooling capacity: 1,000 kW (1,359.62 HP), - LV-TA209T4X-091E885 dry cooler by Kelvion - Performance data as per nameplate shown in images - Includes platform for mounting onto a 40ft ISO sea container - Therefore, hydraulic pipe openings point downward Ibodoxdw R Ejpfx Aacjc - Platform also equipped with control unit and components for cooling circuit - Access ladder and safety features such as railings and anti-slip grating included - Further information and details available upon request

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 175238, Year of construction: 2011, load capacity: 300 kg, empty load weight: 80 kg, usable tank capacity: 250 l, Chip tipping wagon in very good condition, being sold due to workshop reorganization. Must be picked up. Ijdpfx Aasxbz Dqocobc

Condition: good (used), Radial fan, chip extraction fan, fan, extraction, chip blower, high-performance fan -Engine power: 18.5 kW -Speed: 1460 rpm -Volume flow: 15400 m³/h -Total pressure: 2550 Pa -Connection input: Ø 450 mm -Connection output: 350 x 350 mm -Impeller: Ø 780 x 180 mm -Dimensions: 1040/1190/H1070 mm -Weight: 422 kg Ibsdow E Nh Uepfx Aacoc

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: AC, cooling capacity: 56 kW (76.14 HP), type of cooling: water, input frequency: 50 Hz, heating capacity: 67 kW (91.09 HP), fuel type: gas, "SANYO" PANASONIC ECO G Gas heat pump air conditioner Model: SGP-E190J2GU2W Nissan K25 Engine Power source: 230 V AC, 1 Phase, 50 HZ Max electrical input: 1,16 kW, 5,4 A (Continuous) Unit protection: IP24 Cooling capacity: 56 kW Heating capacity: 67 kW Heat input (HS)(Cooling): 43,5 kW Heat input (HS)(Heating): 46 kW Refrigerant: R407C, 17 kg Design pressure high side: 30 bar Design pressure low side: 16 bar Iedsd Tiu Ejpfx Aacobc OUTDOOR USE ONLY! We have 4 pieces on Stock!

Condition: good (used), Year of construction: 1991, Schröder Kombinator emulsify-kombinator, type: EMK 01/3500, building number: 119567, year of construction: 1991, dimensions: 2900 mm x 500 mm x 800 mm. Model: Crystallizer Capacity up to 2.000 kg/h depending on product Product Margarine of shortening Year 1991 Power 7,5 kW Pressure Up to 20 bar Ibodpfx Aeun Tr Toacec Weight ± 1500 kg

Condition: like new (used), The MSP 120 ZK is ideally suited for crushing and subsequent briquetting of various types of metal chips. The MSP 120 ZK briquetting press with integrated shredder is composed of a hydraulic chip press paired with an upstream shredder, both perfectly matched to each other. This system enables the crushing and compaction of chips generated during turning and milling operations. The volume is significantly reduced, and the briquettes are separated from the coolant lubricants (emulsion, oil) absorbed during earlier machining processes. The system consists of a feed hopper for loading the material to be processed and a shredder inside the hopper, which reduces chip length. A conveyor system moves the shredded chips continuously and stepwise via a conveyor belt into the chip press hopper. There, two augers feed the material into the compaction chamber. The system is equipped with a monitored liquid collection tank and pump, allowing coolants to be returned to the production process. Cycle control is managed by a PLC and an electronic level sensor for the monitoring of the hopper fill level. Optionally, a tipping device can be added for manual loading of the unit. Briquetting Press: Throughput (Aluminum): 15–20 kg/h Throughput (Steel, Copper): 45–60 kg/h Briquette diameter: 60 mm Productivity: 120–180 pcs/h Specific pressure on briquette: 1,050 kg/cm³ Motor pump power: 7 kW Total installed power: 10 kW Voltage: 400V / 50 Hz Oil tank: 80 l Dimensions: 1,400 x 1,200 x 1,050 mm Weight: 800 kg Shredder: Number of knife shafts: 1 pc Motor power: 5.5 kW Ibjdpfxsw R Rano Aacoc Number of knives: 16 pcs Exchangeable knives: Yes Knife size: 25 mm Knife material: Hardened steel Shaft length: 400 mm Screen mesh size: 20 mm Hopper inner diameter: 1,000 mm Hopper volume: 1 m³ Weight: 280 kg Power supply: 380V Overall system dimensions: 2,820 x 1,862 x 2,065 mm Colour: Textured paint, RAL 7035 light grey

Condition: good (used), Year of construction: 2015, functionality: fully functional, cooling capacity: 564 kW (766.83 HP), type of cooling: air, overall weight: 6,930 kg, total width: 2,300 mm, total length: 5,800 mm, total height: 2,450 mm, warranty duration: 6 months, heating capacity: 586 kW (796.74 HP), Aircooled chiller/Heat pump CLIMAVENETA FOCS N LN CA 2622 564 kW / 586 kW Cooling capacity: 564 kW / 160.37 tons (12/7 — 35°C) Heating capacity: 586 kW / 166.63 tons (40/45 —7°C) Year of manufacture: 2015 Options: Heat pump. Economizer. Refrigerant circuit: 2 pcs. Iedpfexnlhmox Aacjbc Heat exchanger: Shell and tube Condenser: Copper / Aluminum Compressors: 1 pcs. Bitzer CSH8583-125-40D (screw) + 1 pcs. Bitzer CSH8583-125CVY-40D (screw) Type of refrigerant: R134A Number of fans: 12 pcs. Dimensions: 5.8x2.3x2.45 m Weight: 6930 kg Working hours: 16551/5862 h. Condition: Good

Condition: new, Year of construction: 2015, Combined heat and power unit with 2 buffer storage tanks Additional title: Hot water and power supply system Energy input: 64 kW Gas consumption: 6 Nm³/h Electrical power: 20 kW Thermal power: 41 kW Length: 1668 mm Width: 800 mm Height: 1266 mm Ibodjw Tap Rspfx Aacec Weight: 800 kg Position: free standing Features: Gas-powered 4-cylinder 4-stroke engine with 2237 cm³ displacement, 2 buffer storage tanks with pressure equalisation tank

Condition: ready for operation (used), Year of construction: 1975, functionality: fully functional, Complete system, centrifuge E 700 H/1, drum 690/720/600 mm, drum volume 120 L, speed 735 rpm, wall thickness 12 mm, Ibedpfx Aajw Evy Recsc material GS 45, max. loading 300 kg, batch/hour 10, heating 8 kW, operating voltage 380 V, total connected load 35 A, lifting device for filling, vibratory discharge for chips and parts, three separation drums with different perforation patterns. Chip conveyor belt to the scrap container. System can still be demonstrated under power.

Condition: new, functionality: fully functional, Danfoss Heat Exchanger 079G1153 XB05M-1-50 Ibsdeuacl Espfx Aacjc LARGE STOCK AVAILABLE

Condition: new, Year of construction: 2024, functionality: unexamined, power: 265 kW (360.30 HP), Compact, highly efficient combined heat and power unit with a state-of-the-art SCANIA 6-cylinder, lean-burn gas turbo, 4-stroke gas Otto engine. Unit, gas pressure control system, mixture and engine water cooling circuit mounted on base frame for power and heat generation with a high-quality synchronous generator (3P, 400V, 50Hz) for mains parallel operation and optimized heat extraction via plate heat exchanger for heating water/process heat with a temperature level of VL 90°C / RL 75°C, with catalytic converter (optional SCR system) for low-emission operation in accordance with the MCP Directive (EU) and 44th BImSchV (DE). TECHNICAL DATA GENSET /BHKW - NATURAL GAS/BIOMETHANE Isdpfx Aast E N I Secebc Electrical output at cos φ=1: 265 kWel Electrical efficiency: 41.9 % Thermal efficiency: 44.1 % Total efficiency: 86.0 % Thermal output motor: 150 kWth Thermal output at 120°C exhaust gas temperature: 129 kWth Total thermal output: 279 kWth Electricity coefficient el/th. : 0,95 LEAN TURBO NATURAL GAS / BIOMETHANE ENGINE Engine type 6R Displacement: 12,7Ltr Combustion heat output - 100% load: 632kWel Gas consumption: 63,2Nm³/h Length x width x height m 4.1 x 1.5 x 2.1 The CHP has a control cabinet with a display for the visualization of all relevant operating parameters including a DSL modem for remote maintenance and external monitoring, as well as an interface for control energy for connection to the Energiepilot E2M. The scope of delivery includes a mains starter to provide the optimum starting speed, as well as a gas detector, smoke detector, emergency stop switch and alarm flashing light/horn. All pipes are made of V2A and insulated where necessary. The CHP unit complies with the medium-voltage directive VDE-AR-N 4110:2018-11. An automatic gas shut-off valve for installation outside the CHP installation room and all operating fluids are not included in the scope of delivery. The CHP unit is also optionally available in a container.

Condition: used, Chip conveyor, scraper conveyor with coolant tank BMF Type KF 200 K17 Ident. No.: Order No.: 915979 Year of manufacture: 1992 Metal link width: 200 mm Pitch between scrapers: approx. 380 mm Possible chip removal length: 1100/2100 mm Insertion length: approx. 1350 mm Insertion height: 370 mm Isdpfxohwt H As Aacebc Insertion width: 460 mm Hopper width (top): 400 mm Hopper width (bottom): 170 mm Conveying height - discharge height: approx. 1250 mm Motor power belt drive: 0.37 kW Power supply: 400 Volt, 50 Hz - Scraper chain driven by geared motor - Coolant tank without coolant pump Required space (L x W x H): 3800 x 1300 x 1650 mm Weight of chip conveyor: approx. 500 kg Good condition The chip conveyor comes from a GILDEMEISTER CNC lathe. The conveyor is suitable for chip transport from a milling machine, lathe, or machining center.

Condition: new, Year of construction: 2024, functionality: fully functional, power: 350 kW (475.87 HP), Compact, highly efficient combined heat and power unit with a state-of-the-art SCANIA V 8-cylinder, lean-burn gas turbo, 4-stroke gas Otto engine. Unit, gas pressure control system, mixture and engine water cooling circuit mounted on base frame for power and heat generation with a high-quality synchronous generator (3P, 400V, 50Hz) for mains/parallel operation and optimized heat extraction via plate heat exchanger for heating water/process heat with a temperature level of VL 85°C / RL 70°C, OPTIONAL: with catalytic converter (optional SCR system) for low-emission operation in accordance with the MCP Directive (EU) and 44th BImSchV (DE). TECHNICAL DATA GENSET /CHP - Biogas 50% CH4 Electrical output at cos φ=1: 350 kWel Electrical efficiency: 41.4 % Thermal output motor at 180^exhaust gas temperature: 334 kWth Electricity coefficient el/th. : 1,05 Engine type V8 Displacement: 16 Ltr Combustion thermal output - 100% load: 845kWel Gas consumption at50%CH4: 169.1Nm³/h Length x width x height m 4.1 x 1.5 x 2.1 Weight unfilled 4500kg The CHP has a control cabinet with a display for the visualization of all relevant operating parameters including a DSL modem for remote maintenance and external monitoring, as well as an interface for control energy for connection to the Energiepilot E2M. The scope of delivery includes a mains starter to provide the optimum starting speed, as well as a gas detector, smoke detector, emergency stop switch and alarm flashing light/horn. All pipes are made of V2A and insulated where necessary. To ensure that the motors are kept warm, the installed heat pumps are programmed to start up in a set cycle, that they start up in a set cycle and thus enable the desired temperature to be maintained. An automatic gas shut-off valve for installation outside the CHP installation room is not included in the scope of delivery. The CHP unit complies with the medium-voltage directive VDE-AR-N 4110:2018-11. An automatic gas shut-off valve for installation outside the CHP installation room and all operating fluids are not included in the scope of delivery. The CHP unit is also optionally available in a container. Ibodpfxot Uu Ezs Aacsc The entire unit is also available as a natural gas version.

Condition: used, Tipping container, tipping skip for forklift trucks Ibsdpfx Aashly Ifecjc Chip container – bulk tipping skip – folding container Load capacity: approx. 1000 kg Volume: 1 m³ Entry brackets: 230 x 110 mm Fork spacing inside: 160 mm Fork spacing outside: max. 600 mm - Fork entry pockets – entry brackets for transport and emptying by forklift or pedestrian pallet truck - Manual tipping mechanism via hand lever - 4 heavy-duty plastic fixed castors Ø 175 mm, 2 of which are swivel castors - Foldable tow bar Dead weight: 220 kg Length: 1700 mm Width: 1060 mm Height: 1500 mm Very good condition Suitable for collecting, storing and transferring recyclable materials