Used Charmilles Hd 8 for sale (64)

Condition: reconditioned (used), Year of construction: 1999, operating hours: 25,984 h, machine/vehicle number: 125128, In very good condition: Refurbished Charmilles Roboform 2000+ completely refurbished with 16-fold RTC changer. Extensive maintenance performed: all air-valves and tubing replaced, filters replaced, motors refurbished with new bearings and cleaned up, fans replaced, screen replaced. Optionally floppy drives can be exchanged for USB drives. C-axis seals have been replaced and is accurately aligned again. This is a 64A machine. Software and documentation is provided, onsite installation including warranty can be discussed! Tested and fully functional. Can be viewed and tested in working order. Bodew Ad Idepfx Adxjlp

Condition: used, Year of construction: 1993, travel distance X-axis: 320 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 116 mm, workpiece height (max.): 150 mm, workpiece width (max.): 990 mm, workpiece length (max.): 505 mm, table width: 420 mm, table load: 500 kg, Equipment: cooling unit, documentation/manual, Taken out of production in working condition, removed due to the purchase of a new machine. The machine is currently disconnected and dismantled in our warehouse. Bsdpfx Aewu Shpedxolp All cables are numbered and photographed; these can be shared after payment for the machine to ensure correct installation at the new location.

Condition: good (used), workpiece weight (max.): 800 kg, travel distance X-axis: 630 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 160 mm, ★ EXCEPTIONALLY well-maintained machine from the liquidation of a renowned toolmaker – please also see our other listings ★ ❗Wire EDM Machine GF AGIE CHARMILLES ROBOFIL FI 6050 TW❗ Year of manufacture: 2005 / 2008 Machine number: 136005 Condition: Used, untested Delivery terms: Free loaded on truck (FCA) – unpacked Location: 73347 Mühlhausen Availability: Early December 2025 – The machines must be collected by the buyer in week 49 / 2025 as scheduled. The exact date will be specified by us. Earlier availability may be possible by arrangement. Payment terms: Advance payment by bank transfer Internal ref.: JO3 Available for inspection under power: YES – by appointment Bjdpfx Adjxg Rf Uoxelp Technical data: Max. workpiece dimensions: 1260 x 690 x 360 mm Max. table load: 800 kg Travel (X / Y / Z): 630 / 400 / 160 mm Travel (U / V): +48 mm Measuring resolution: 0.5 μm Manual rapid traverse: 15 mm/s Wire feed speed: Adjustable from 2 – 15 m/min Taper angle adjustable from 0° to 30° Work tank dimensions: 1420 x 770 x 420 mm Max. discharge current: 45 A Operating hours approx.: 33,568 !!! Cutting hours approx.: 3,660 !!! Since the machine is currently connected to a central cooling system, the buyer may need to provide a separate chiller. Further technical details are available upon request. Scope of delivery: Manuals Accessories & spare parts as shown in the pictures Dimensions & weights: Installation dimensions L x W x H approx.: 3000 x 2700 x 2500 mm Weight approx.: 4,000 kg If you have any questions or wish to arrange a viewing, please feel free to contact us: ⚠️Also see our other listings⚠️ Additional information: We strongly recommend collection via direct transport (freight carrier) The goods are sold under exclusion of any warranty Technical data subject to change Sale subject to prior sale ❗Sale to business customers only❗

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Machining type: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table size: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L Axes X, Y, Z, U and V Travel on X, Y, Z axes: 550 x 350 x 400 mm Travel on U, V axes: 550 x 350 mm Anti-collision protection: X, Y, Z, U, and V axes Bjdpfow Ucyuex Adxjlp Taper cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options: 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weights and types (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weights and types (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measurement resolution: 0.5 micron Servo motors: AC type Unless otherwise stated, technical specifications are provided without commitment and subject to error or omission.

Condition: good (used), Year of construction: 1998, Working area 500 x 350 x 250 (L x W x H), available with extensive accessories if required! Eroding wire 0,25mm - 10 pieces new spools available Filters and resin cartridges available Bjdpfeha U I Dox Adxslp Please ask if you are interested !

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Heidenhain iTNC 530, working area X 600 x Y 450 x Z 450 mm, spindle mount CAT40, 24-position automatic tool changer, 20,000 rpm spindle, machine weight 6,100 kg, power connection 16 kW, main fuse 32 A, operating voltage 400 V, 50/60 Hz Bjdpfjw Hxzmex Adxolp

Condition: good (used), Year of construction: 2006, functionality: fully functional, workpiece weight (max.): 2,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 1,000 mm, workpiece length (max.): 1,380 mm, Charmilles Robofil 690 Blodpfx Aewz Iuxjdxop - Maximum part dimension 1380 x 1000 x 400 - Travels X,Y,Z 800 x 600 x 600 x 400 - Travels U,V ±30 - Maximum demoulding ±15/110 - Global protection by EC-EMC cabinet - Fixed work table - Integrated monobloc flange table - Guaranteed thermal stability; polymer concrete - 5 axes controlled by numerical control (XYUVZ) - Linear glass rulers on all axes - Axis protection by anti-collision system - Tilting up to ±30°. - ThermoCut (automatic threading and rethreading) - Bonina thread holder 4, 8 and 16Kg - Filtration system: 2 filters (29m2) - Water/water heat exchanger - Automatic regulation of deionization with cylinder - Numerical control CT Millenium (Fanuc) - 12" TFT color graphic touch screen - Hard disk 10GB - Remote control - Machining strategy PROFIL-EXPERT - Integrated CT-EXPERT technology - Automatic adaption of the PILOT-EXPERT generator - Digital generator control - Autorestart - Self-diagnosis - Integrated Ethernet card Additionals: Contact electrode Pinch roller Chiller Spare motor for U/V axis

Condition: defective spare-parts repository (used), Year of construction: 1995,  Machine with breakdown (unknown) proposed for spare parts. Blsdpfx Ajwzifxjdxjp

Condition: used, Year of construction: 2002, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, ★ TOP well-maintained machine from the liquidation of a renowned toolmaker - please also see our other listings ★ ❗ Wire EDM Machine CHARMILLES ROBOFIL 240 ❗ - Year of manufacture: 2002 - Machine number: 920530 - Condition: Used, unchecked - Delivery terms: Free loaded on truck – unpacked - Location: 73347 Mühlhausen - Availability: Beginning of December 2025 – The items must be collected by the buyer in calendar week 49 of 2025. The exact date will be specified by us. Earlier availability may be possible by arrangement. - Payment terms: Advance payment by bank transfer - Internal reference no.: JO2 - Can be inspected under power: YES – by arrangement Technical data: - Maximum workpiece dimensions: 1000 x 550 x 220 mm - Maximum workpiece weight: 750 kg - Table dimensions: 680 x 450 mm - Total dielectric volume: 760 L - Travel X / Y / Z: 350 / 220 / 220 mm - Travel U / V: 350 / 220 mm - Maximum taper angle: ± 30° / 220 mm - Total generator hours approx.: 16,675 - Since the machine is currently connected to a central cooling system, the buyer will need a separate chiller. - Further technical details available on request Scope of delivery: - Manuals - Various accessories and spare parts as per images Dimensions & weights: - Installation dimensions L x W x H approx.: 2000 x 2000 x 2100 mm - Weight approx.: 2,500 kg ⚠️ Please also see our additional listings ⚠️ Additional notes: Bodpfx Aexg N Axodxelp ► Direct pick-up (by forwarding agent) is expressly recommended ► The goods are sold excluding any warranty ► Technical data provided without obligation ► Subject to prior sale ❗ Sale only to entrepreneurs ❗

Condition: used, Year of construction: 1995, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, total height: 2,230 mm, total length: 1,800 mm, total width: 1,600 mm, workpiece height (max.): 400 mm, workpiece width (max.): 500 mm, workpiece length (max.): 850 mm, overall weight: 2,500 kg, Charmilles Robofil 310 Year of manufacture: 1995 Travel paths (X/Y/Z): 400 x 250 x 400 mm Travel paths (U/V): 400 x 250 mm Taper angle: +/- 30° at 400 mm height Max. workpiece dimensions (width x depth x height): 850 x 500 x 400 mm Max. workpiece weight: 1000 kg Collision protection on X/Y/U/V/Z axes Standard wire guides: 0.25 mm Machine dimensions: 1800 x 1600 x 2230 mm Machine weight: 2500 kg Blodpew Hxqnjfx Adxep The machine was in operation with our customer until recently and is available immediately.

Condition: used, TECHNICAL DETAILS - Table dimensions : 900 x 600 [mm] - Dielectric capacity : 1200 [l] Bodpfx Aeuhca Sjdxslp TRAVELS - Travels on X/Y/Z axes : 550 x 350 x 400 [mm] - Travels on U/V axes : 550 x 350 [mm] - Rapid traverses rates (X/Y/Z) : 3 [m/min] - Rapid traverses rates (U/V) : 3 [m/min] - Max. taper : +/- 30 [°/mm] PART - Max. part dimensions : 1200 x 700 x 400 [mm] - Max. part weight : 1500 [kg] WIRE GUIDE - Wire diameter : 0.15 - 0.33 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 12 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2600 x 2600 [mm] - Machine height : 2340 [mm] - Machine weight : 2850 [kg] EQUIPMENT - CNC : CHARMILLES - Screen : LCD 15'' TFT - Remote control

Year of construction: 1990, condition: ready for operation (used), With dielectric, fully automatic water treatment system with ion exchanger, filtration system, clamping system with generator and adaptive discharge unit for precise machining, cooling and hydraulics, external pump and filtration systems. Without documentation, maintained internally, pneumatic hoses have been renewed, the machine has not been in operation since 2022 but was last functional. A clamping system is optionally available. An on-site inspection is possible. Blodpfxsw S Tygj Adxjp

Condition: ready for operation (used), Year of construction: 2001, operating hours: 25,539 h, functionality: fully functional, machine/vehicle number: 0.2633/331852, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 200 mm, total height: 200 mm, total length: 800 mm, total width: 500 mm, workpiece height (max.): 200 mm, type of input current: three-phase, overall weight: 2,200 kg, table load: 500 kg, positioning accuracy: 0.005 mm, Equipment: cooling unit, documentation/manual, fridge, CHARMILLES TECHNOLOGIES from 2001 Model: ROBOFIL 290 P 0.25MM AND 0.30MM WIRE EROSION MACHINE MAKE AN OFFER TO BUY BACK Features: - Maximum part dimensions: 850 x 500 x 200 [mm] - Maximum weight: workpiece weight: 500 [kg] - X x Y x Z strokes: 400 x 250 x 200 [mm] - U x V stroke: 400 x 250 [mm] - clearance/height angle: ±30 [°] / 200 [mm] - wire diameter: 0.25 [mm] - acceptable coil types: P3 and P5 Bsdpfev Rfm Ssx Adxelp - tank capacity: 300 [l] - generator: 10 [kVA] - 400/400V isolation transformer - dimensions: 1800 x 1600 x 2130 [mm] - weight: 2200 [kg]

Condition: not inspected (used), Spark erosion machine Manufacturer: Charmilles Technologies Model: Form 2 – LC Year of manufacture 1992 Generator: 50A Space requirement: 1200 x 1300 x 2200 mm (LxWxH) Weight: 1100kg Work basin: 800 x 480 x 250 mm (LxWxH) Travel paths X/Y/Z: 300 x 200 x 150 mm Electrode weight: max. 60 kg Workpiece weight: max. 500 kg Equipment: - 3-axis digital display Heidenhain VRZ 760 - System 3R clamping device - Machine light - Fire extinguishing device Bljdpfsvld Iwsx Adxjp The machine can be demonstrated on site under power. All information without guarantee Subject to errors and prior sale

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, tank capacity: 410 l, Equipment: documentation/manual, ★ TOP maintained machine from the dissolution of a renowned toolmaker – be sure to check out our other listings as well ★ Automated sinker EDM cell consisting of: ● Sinker EDM machine GF Agie Charmilles Form 350 P Year of manufacture: 2023 Serial number: 592.200.00.0338 ● Pallet and electrode changer System 3R Workpartner 1+ LH Year of manufacture: 2023 Serial number: 2312-V00-830 ● Condition: Very good ● Delivery terms: Free loaded onto truck (FCA), unpacked ● Location: 73347 Mühlhausen ● Availability: Early December 2025 – The items must be collected by the buyer during calendar week 49/2025 as scheduled. The exact date will be set by us. Earlier availability may be possible upon agreement. ● Payment terms: Advance payment by bank transfer ● Internal ref. no.: JO1 ● Under power for inspection: YES – by arrangement Technical data: ● Control: AC FORM HMI ● Travel X / Y / Z: 350 / 250 / 300 mm ● Max. axis speeds X / Y / Z: 6 / 6 / 15 m/min ● Minimum resolution X / Y / Z: 0.01 μm ● Linear glass scales ● Operating hours: Machine on = 15,132 hours, machining time = only 694 hours! ● Max. electrode weight on ram: 50 kg Bljdpfxoxgvgks Adxop ● Integrated C-axis ● Table dimensions: 500 x 400 mm ● Max. workpiece dimensions: 700 x 460 x 275 mm ● Max. workpiece weight: 500 kg ● Fire extinguishing system ● Rated connected load: 9.6 kVA ● Power: 13.8 A ● Voltage: 400 V ● Dielectric fluid capacity: 410 L ● Max. working current: 80 A ● Connection for exhaust gas extraction ● Pallet and electrode changer System 3R Workpartner 1+ LH with 9 pallet slots & 89 electrode slots ● As the machine is connected to a central cooling system, the buyer may require a separate chiller unit ● More technical data on request Scope of delivery: ● Manuals ● Extensive / high-quality accessories and spare parts as per photos Dimensions & weight: ● Installation dimensions L x W x H approx.: 4000 x 2200 x 2600 mm ● Weight approx.: 4000 kg ⚠️Check out our other listings as well⚠️ Additional notes: ►We expressly recommend collection by direct shipment (freight forwarder) ►The goods are sold without any warranty ►Technical data without guarantee ►Subject to prior sale ❗Sale only to business customers❗

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 331965, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 200 mm, total height: 2,180 mm, total length: 1,800 mm, total width: 1,600 mm, workpiece height (max.): 200 mm, workpiece width (max.): 500 mm, workpiece length (max.): 850 mm, overall weight: 2,190 kg, Charmilles Robofil 290P Year of manufacture: 2001 Travel distances (X/Y/Z): 400 x 250 x 200 mm Travel distances (U/V): 400 x 250 mm Taper angle: +/- 30° at 200 mm height Max. workpiece dimensions (W x D x H): 850 x 500 x 200 mm Max. workpiece weight: 500 kg Programmable pressure levels Injection pressure upper nozzle: 0...11.5 bar Injection pressure lower nozzle: 0...11.5 bar Standard wire guides: 0.25 mm Blodpfx Asw Htdpjdxsp Machine dimensions: 1800 x 1600 x 2180 mm Machine weight: 2190 kg The machine was in use with our customer until recently and is available for immediate delivery.

Condition: used, TECHNICAL DETAILS - Travels on X/Y/Z axes : 400 x 300 x 350 [mm] - Rapid traverses rates (X/Y/Z) : 6 / 6 / 15 [m/min] - Min./max. distance between table and chuck : 170 / 520 [mm] - Max. part dimensions : 820 x 580 x 250 [mm] - Max. part weight : 800 [kg] - Max. electrode weight : 50 [kg] - C axis : 0 - 100 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 9.1 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 4.700 x 2.750 [mm] Blodpswl Rh Nsfx Adxjp - Machine height : 2.680 [mm] - Machine weight : 3.830 [kg] - Number of working hours : 13659 [h] EQUIPMENT - CNC : AGIEVISION 5 - Workpiece loading / unloading robot - Spindle nose : EROWA - Dielectric capacity : 600 [l]

Condition: used, Year of construction: 2012, - +GF+ Millenium CNC control with touchscreen - Year of manufacture: 2012 Specifications - Working area: 550 x 350 x 400 mm - Rapid traverse X/Y: 3 m/min - Wire diameter: 0.15 - 0.33 mm - Tool holder angle: 30° with a workpiece thickness of 400 mm - Max. workpiece size X/Y/Z: 1200 x 700 x 400 mm - Table size: 900 x 600 mm - Max. table load: 1500 kg - Power: 12 kVA Blsdpew Rc Eisfx Adxep - Operating voltage: 3x 400 V - Rated current: 18 A - Dimensions (W x H x D): approx. 2600 x 2350 x 2600 mm - Machine weight: 2850 kg

Condition: used, Year of construction: 2015, operating hours: 24,900 h, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, Wire Diameter 0,1-0,3 mm Automatik Threading Working Hours 5900 Std Verfahrwege X 350 mm Y 220 mm Z 220 mm U 350 mm V 220 mm Bjdewzyvhjpfx Adxslp Year 2015

Condition: good (used), Year of construction: 2004,   Bledpfx Adowtzdwsxsp Chuck type: EROWA Electrode changer: X-Axis Travel (mm): X-Axis Travel (mm): X-Axis Travel (mm): CNC Type: Worktank length: Worktank width: Worktank height: Table length: Table width: Max. workpiece length: Max. workpiece width: Max. workpiece height: Max. workpiece weight (kg): Max. machining current (A): Length x width x height: Weight (kg): Worked power hours: The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change.

Condition: ready for operation (used), Travel X/Y/Z/U/V: 400mm/250mm/400mm/400mm/250mm, max. workpiece dimensions X/Y/Z: 850mm/500mm/400mm, wire diameter: 0.1mm-0.3mm, max. table load: 1000kg, power requirement: 10kVA. Machine dimensions X/Y/Z: approx. 1800mm/1600mm/2230mm, weight: approx. 2800kg. On-site inspection is possible. Bedpouqacksfx Adxjlp

Condition: excellent (used), For sale: professional rotary electrospindle by the renowned brand System 3R (Sweden), designed for use with Charmilles EDM machines. The device is intended for precise rotation of graphite and copper electrodes during the EDM drilling process, ensuring high machining accuracy and quality. Technical data and features: • Manufacturer: System 3R, Sweden • Model/Reference: 1.6 SER 202101 • Compatibility: 3R clamping system • Original rotary spindle dedicated for EDM • Belt drive – stable torque transmission • Robust industrial design, suitable for continuous operation • System 3R holder with quick-change electrode mechanism • Fits machines incl. Charmilles (e.g. Roboform series) Condition: used, complete, in working order, with normal signs of use. Equipment of this class guarantees precision, reliability, and compatibility with 3R systems – an ideal solution for toolrooms, mould shops, and companies specializing in precise EDM machining. Bedpfx Ajw Sat Hsdxslp

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, Charmilles Roboform 350 µ Year of manufacture: 2007 C-frame design Fixed table with lowerable tank Blsdpjwxwlzofx Adxjp Travel paths: X=350 mm, Y=250 mm, Z=350 mm Max. workpiece size: X=780 mm, Y=530 mm, Z=300 mm Max. workpiece weight: 500 kg Max. electrode weight: 50 kg Distance table - chuck: 150 - 450 mm Working current 64 amperes Best achievable surface finish Ra 0.1 µm Integrated Accura C-axis Linear glass scales with 0.05 µm measuring resolution Incl. pneumatic chuck Erowa ITS 50 Incl. 32-position rotary electrode changer Machine weight (net): 2800 kg Machine dimensions (L x W x H): 1900 x 1690 x 2522 mm The machine has already been cleaned, serviced, and subsequently tested. We are happy to commission the machine for you as well.

Condition: used, Year of construction: 2008, operating hours: 5,900 h, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, Wire Diameter 0,1-0,3 mm Automatik Threading Working Hours 5900 Std Verfahrwege X 350 mm Bledpfxjwzyr As Adxjp Y 220 mm Z 220 mm U 350 mm V 220 mm Year 2008

Condition: ready for operation (used), Year of construction: 2008, An Agie start hole drilling machine for the EDM industry is available. Travel X/Y/Z: 300mm/200mm/300mm, electrode diameter: 0.3mm-3mm, max. drilling depth: 200mm, table dimensions X/Y: 400mm/300mm, max. workpiece weight: 300kg. Machine dimensions X/Y/Z: approx. 1400mm/900mm/2000mm, weight: approx. 950kg. Documentation available. On-site inspection is possible. Blodpfx Asu Ilbuodxjp