Used Centering Machine for sale (70,216)

Condition: used, Year of construction: 2006, Control MAZATROL 640M x-travel 1.740 mm y-travel 760 mm z-travel 660 mm table dimensions 2.000 x 760 mm max. table load 1.400 kg spindle tunring speed 12.000 U/min tool taper SK 40 number of tool places 30 Pos. weight approx. 11.500 kg Condition: used Hnjdpfez S N I Dsx Abkju Accessories, tools, and clamping devices shown are included in the scope of delivery only if this is explicitly stated in the additional information. Subject to changes and errors in technical data and specifications; prior sale reserved!

Condition: excellent (used), MASTERWOOD TF 100 2.0 machining center – used Throughput machining, ball screw spindles on all axes, network card for remote maintenance, integrated control cabinet, sawing unit for grooving in the X-direction, pick-up tool changer, central lubrication system, automatic, sensor for panel measurement, new drill set, new tenoning blade, Clamex optionally available, door machining optionally available ----- Technical data ----- max. workpiece length X: unlimited, max. workpiece length Y: 1,000 mm, max. workpiece thickness: 60 mm, number of vertical drilling spindles: 10, number of horizontal twin drilling spindles in the X-direction: 2, number of horizontal twin drilling spindles in the Y-direction: 1, saw blade diameter of sawing unit: 120 mm, number of tools in the tool changer: 6, dust extraction connection diameter: 150 mm, compressed air connection: 6-8 bar, dimensions (L x W x H): 1,920 x 2,818 x 1,620 mm, weight: 1,500 kg Hnedpfx Abey Eylwokju Quality information: - complete basic cleaning - electrical system checked - pneumatics checked - adjusted according to manufacturer's specifications - ready for immediate use

Condition: used, Year of construction: 2004, Model: Depo-Jet 906 Year of manufacture: 2004 Control system: Heidenhain iTNC 530 Operating hours: approx. 32,200 h Spindle hours: approx. 4,900 h Spindle replacement in 2022 Technical data: X-axis: 900 mm Y-axis: 600 mm Z-axis: 500 mm Distance spindle nose - table: 150-650 mm Table size: 1100 x 600 mm Spindle speed (BUILT-IN): 24,000 rpm Power: 29 kW Tool holder: HSK-A63A Feed rate max.: 1-20,000 mm/min X.Y.Z rapid traverse: 20,000 mm/min Tool magazine: 20 tools Total power: 47 kVA Dimensions (L x W x H): 3,010 x 3,716 x 3,100 mm Weight: approx. 11,000 kg XYZ axis drive protection: Torque-limiting coupling, direct drive Oil cooler: ±1°C of the ambient temperature in the workshop Positional accuracy (X/Y/Z): 0.004 mm Reproducibility (X/Y/Z): 0.002 mm Hnsdpfx Aoz Rxgmsbkju Accessories: Electronic handwheel Tool length sensor Heidenhain TS 120 Documentation The machine is powered on and can be inspected. Subject to technical data errors and prior sale.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 2080092, Used CNC horizontal 5-axis twin-spindle double-table machining center Manufacturer: SW – Schwäbische Werkzeugmaschinen GmbH Type: BAW06-22 Year of manufacture: 2011 Machine No.: 2080092 Weight: approx. 16,000 kg Technical data: - CNC horizontal machining center - 5-axis design - Twin spindle - Double table - Travel ranges: - X-axis: 600 mm - Y-axis: 600 mm Hodpfxjz E Ddfe Abksnu - Z-axis: 510 mm - Rapid traverse: up to 45 m/min - Tool interface: HSK-A63 - Spindle speed: up to 17,500 rpm Equipment: Machine with standard accessories. Availability: Available in the short term.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, operating hours: 5,800 h, power: 60 kW (81.58 HP), travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,400 mm, workpiece height (max.): 1,400 mm, workpiece weight (max.): 2,000 kg, number of axes: 4, controller manufacturer: Siemens, controller model: 840D SL, torque: 1,146 Nm, rotational speed (max.): 8,000 rpm, Equipment: CE marking, documentation/manual, Machine name / type: HELLER / H 8000 Operating hours: 5800 Year of construction: 2020 Control unit: Siemens 840D SL Spindle: EPC-Unit (8.000 1/min, 60 kW, 1146 Nm) Tool clamping system: HSK 100 Tool magazine / places: Chain / 100 Rotary table: 360.000° X 0,001° Coolant unit: KNOLL, KF 600, IKZ 70 bar, (work area flushing) Hodpfsu Urgbjx Abkjnu Positioning range XYZ (mm): 1250 / 1200 / 1100 Pallet size (mm): 800 X 800 Workpiece clamping: mechanical Additonal options / Specifics: multi-spindle-head support (MSK); receiver for measuring probe (RENISHAW); fast drill fracture sensing (SBBK); interface exhaust system; screen blow-off device for operator door; codechip; Chip conveyor function check; Integrated process monitoring (IPM) + Monitoring function to minimize machine damage in case of collision; 3 colour status lamp; increased tool weight 35kg; scraping conveyor for wet machining; Coolant temperature control; Feed force display; Tangential control;

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, workpiece length (max.): 630 mm, workpiece width (max.): 630 mm, workpiece height (max.): 500 mm, workpiece weight (max.): 200 kg, total height: 2,590 mm, total length: 4,780 mm, total width: 4,410 mm, table height: 390 mm, table length: 390 mm, overall weight: 5,900 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 25 W, number of slots in tool magazine: 30, Equipment: chip conveyor, Year of construction: 2010 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Hedoz Dp Dbepfx Abkonu Signal lamp Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat compensator Direct measuring system XYZ Electrical cabinet active cooling unit Oil skimmer Ready for internal cooling (40/80 bar) RENISHAW Measuring probe Automatic door Machine running times Under power: 54257 Spindle Working: 32498 Rated power kVA: 48 Basic machine dimensions / weight Length mm: 4780 Width mm: 4410 Height mm: 2590 Weight kg: 5900

Condition: used, Year of construction: 2006, number of axes: 3, working width: 1,250 mm, working length: 3,100 mm, TECHNICAL DETAILS Working area, X-axis: 3,100 mm Working area, Y-axis: 1,250 mm Max. panel thickness: 85 mm Number of controlled axes: 3 Drilling unit Number of drilling units: 1 Position of drilling unit: top Vertical drilling spindles: 7 Horizontal drilling spindles, X-direction: 2 Horizontal drilling spindles, Y-direction: 2 Total number of vertical and horizontal drilling spindles: 11 Milling unit Hnedpfx Abjz En Afekou Number of milling spindles: 1 Position of milling spindle: top Controlled axes: 3 Motor power: 9 kW Automatic tool changer: yes Grooving unit Number of grooving units: 1 Position of grooving unit: top Swivel positions: 0° / 90° Number of tool magazines: 1 Tool positions: 8 Position of tool magazine: machine side Number of work tables: 1 Table width: 3,100 mm Table length: 1,250 mm Table material: phenolic resin MACHINE DETAILS Number of vacuum pumps: 1 Suction capacity per pump: 250 m³/h Control system: PC Control Programming software: WoodWOP 5.0 EQUIPMENT Flat table design Nesting work table Vacuum pump Automatic tool changer Tool magazine positioned on the side Safety light barriers CE marking The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6279

Condition: excellent (used), Year of construction: 2004, Year 2004 With 8 station Fastem pallet loading system with tombs Tooling & manuals 12,000rpm 40 ATC DIN40 / Renishaw probing Hnsdpfx Ajzxr Twobkju Pallet size 400mm x 400mm

Condition: used, Year of construction: 2004, Control MAZATROL 640M NEXUS x-travel 560 mm y-travel 410 mm z-travel 510 mm table dimensions 900 x 410 mm max. table load 500 kg spindle tunring speed 12.000 U/min tool taper SK 40 number of tool places 30 Pos. weight approx. 5.010 kg Hnedpfxez S N Ikj Abkeu Condition: used Accessories, tools, and clamping devices shown are included in the scope of delivery only if this is explicitly stated in the additional information. Subject to changes and errors in technical data and specifications; prior sale reserved!

Condition: used, Year of construction: 1996, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain TNC370, overall weight: 3,600 kg, spindle nose: SK40, Equipment: documentation/manual, Bridgeport VMC1000-22 Heidenhain TNC370 control X-Y-Z 1020-520-500 mm 6.000rpm SK40 Hnjdpfx Abjz Iugcekju 22 Toolchanger Built 6-1996 Machine is under power

Condition: good (used), Year of construction: 2012, Hasegawa PM150 Machining Center Hedpfx Abjx Hqv Nokjnu Manufacturer: Hasegawa Model: PM 150 Year of manufacture: 2012 Number of axes: 4 Travel X axis: 150 mm Travel Y axis: 225 mm Travel Z axis: 200 mm Swivel axis: YES Rapid traverse X, Y, Z: 30 m/min Table load capacity: 80 kg Table working surface: 300 × 260 mm T-slot table: 12H7 × 5 Spindle taper: HSK E32 Spindle speed: 100 to 30000 rpm Tool magazine: 10 tools Max. tool size: Ø50 mm Memory capacity: 5120 m 2048 kB Minimum input increment: 0.1 µm Interface: RS232C Number of programs: 63 No guarantee is given for the accuracy, completeness, or timeliness of the information provided.

Condition: used, Year of construction: 2014, total height: 2,800 mm, total length: 10,300 mm, total width: 2,450 mm, Colour: Grey Hsdpfx Abeytcl Ijksnu Empty weight: 6.600 kg Price: On request - Year: 2014 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AA2/002546 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 11 - Type milling table: Beam table - Tool holder: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: Yes - └ Motor power [kW]: 3 - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 10 - Tool changer positions [pcs.]: 24 - System/software: Xilog plus - Safety feature: Door interlock switches, Safety light curtain, Enclosed fence - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: Vtlf 250 - └ Year of manufacture: 2008 - └ Main motor power [kW]: 5.5 - └ Connection diameter [mm]: 70 - └ Oil free: Yes - Tools included: Yes - CNC options: Offcut conveyor, Manual control - CNC documentation available: USB stick - Table length [mm]: 5200 - Table width [mm]: 1300 - Voltage [V]: 400 - Current consumption [A]: 64 - Transport dimensions: 10300mm x 2450mm x 2800mm (l x w x h) - Transport weight [kg]: 6600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2008, functionality: unexamined, machine/vehicle number: 2200180, travel distance X-axis: 1,600 mm, travel distance Y-axis: 815 mm, travel distance Z-axis: 815 mm, spindle speed (max.): 4,500 rpm, spindle motor power: 20,500 W, The Saeilo Contur KV 1600 is a used vertical machining center, manufactured in 2008 by Kent Industrial in Taiwan and distributed in Germany through Saeilo. With an X-axis travel of 1,600 mm and 815 mm in Y and Z, it is suitable for long plates, housings, and fixture components that can no longer be accommodated on smaller machining centers. It is controlled by a Siemens Sinumerik 840D. The machine is located in the Düsseldorf area. TECHNICAL DATA - Year of manufacture: 2008 - Control: Siemens Sinumerik 840D - Travel X / Y / Z: 1,600 / 815 / 815 mm - Spindle speed max.: 4,500 rpm - Spindle drive: 15 / 20.5 kW, ball screws - Tool holder: ISO 40 - Tool magazine: 32 positions - Gearbox: ZF two-stage gearbox EQUIPMENT AND ACCESSORIES Hnedpfjz H Uf Nex Abksu - Chip conveyor Mayfran LT 200 LS - Tool holders, partially populated - Drilling and milling tools - Two vices on the table (according to the photos) CONDITION During our inspection on October 1, 2026, the machine was not in operation. Therefore, we are selling it as untested, in its current condition. We recommend an on-site inspection. AREAS OF APPLICATION Typical applications include plates, housings, molds, and fixtures in mechanical engineering and contract manufacturing. The long X-axis travel also allows for shuttle machining with two setups. LOCATION AND PROCEDURE The machine is located in the Düsseldorf area. Inspection is possible by appointment. The buyer is responsible for disassembly, loading, and transport; upon request, we can provide contact details for local freight forwarders. Price upon request. Please feel free to contact us via the contact form.

Condition: used, Year of construction: 1997, Hermle U 630 T 3-axis universal CNC milling machine Hermle 3-axis universal CNC milling machine Type/Model: U 630 T Condition: Used Year of manufacture: 1997 Technical data: Tool holder: SK 40 Tool changer: 16-position Travel ranges X/Y/Z: 630 mm x 500 mm x 500 mm Spindle speed range: max. 7000 rpm Quill stroke: 75 mm Work table Clamping area: 900 x 528 mm Max. load: 400 kg Total connected load: 14 kW Control system: Heidenhain TNC 430 Dimensions L/W/H approx.: 2.30 m x 2.10 m x 2.10 m Weight approx.: 4,800 kg Hodpfx Ajz Szarobkenu

Condition: as good as new (ex-display), Year of construction: 2026, CNC Machining Centers Rover Multi Up M C S Working Area*: X = 3280 mm; Y = from 1580 to 1660 mm, depending on work conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 29 mm Workpiece Clearance*: Y = 1900 mm Axis Travel*: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Subdivision of the vacuum system into 2 working zones and 2 clamping zones in X. AUXILIARY VACUUM SYSTEM – 2 zones Allows clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the turret tool magazine with 16 positions and the side tool magazine with 12 positions. The tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for machine PC. 6 ATS workpiece supports – 18 module carriers — 6 aluminium workpiece supports. The positioning of the workpiece supports is via linear guides with ball bearing slider blocks. Clamping is performed on the front and rear linear guides via pneumatic cylinders. Clamping is released by a push button located at the front of the workpiece support. — 18 module carriers, 132 x 132 x H 41.5 mm, with independent pneumatic clamping. The vacuum modules can be rotated in 15° increments on the module carriers; an ideal solution for shaped parts. — 18 covers for module carriers without template. SA (Set-Up Assistant) working table for tables up to 1550 mm. Supported manual positioning system with motion direction indicator and position indicator. — Sensors on each working table and along the X-axis of the working area. — Display of direction and position achieved for the carriage during positioning phase, mounted on each working table. According to the programmed configuration of the working tables, the system indicates the direction of movement for each working table and carriage, and confirms with a green LED and audible signal when the correct position is reached, with a tolerance of +/- 1.5 mm. Subdivision of the pneumatic system into 2 working areas in X. Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange for preparation of a 5-axis interpolating machining unit for mounting aggregates. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions, integrated into the machine bed. Hodpfx Aoy Ehrxsbkenu Turret tool magazine with 16 positions, installed directly on the X machining unit. HSK F63 tool adapter, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech tool set Complete set of tools for the acceptance test Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital device for measuring tool length up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter suction cup proposal 5-Axis Simultaneous Material removal simulation 12-month warranty period Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2002, Machining Centre - Universal Deckel Maho DMU 60 T Year of manufacture: 2002 Number of axes: 5 (3+2) Hsdpfx Asxqfw Tobkenu Technical specifications: Travel paths: X-axis: 630 mm Y-axis: 560 mm Z-axis: 560 mm Magazine positions: 24 SK 40 NC rotary table integrated into fixed table. Clamping surface: 600 x 1000 mm Diameter: 600 mm Table weight: 800 kg Number of T-slots: 8 / 1 T-slot width: 14 H12 / 14 H7 T-slot distance: 63 mm Max. table load: 350 kg Rotatable C: 360° 5 axes - Controlled NC swivel milling head (B axis) - Rotary table integrated into fixed table (C axis)

Condition: used, Year of construction: 2006, number of axes: 3, working width: 2,040 mm, working length: 3,680 mm, TECHNICAL DETAILS MACHINING PROCESS Machining process: Drilling and milling WORKING AREA X-axis working area: 3,680 mm Y-axis working area: 2,040 mm Number of working areas: 2 Number of controlled axes: 3 WORKTABLE Table type: Flat table / Nesting table Number of tables: 1 Table width: 3,680 mm Table length: 2,040 mm Table material: Aluminum DRILLING UNIT Number of drilling units: 1 Position of drilling unit: top Vertical drilling spindles: 7 Horizontal drilling spindles, X-axis: 2 Horizontal drilling spindles, Y-axis: 2 Total number of drilling spindles: 11 MILLING SPINDLE Number of milling spindles: 1 Position of milling spindle: top Controlled axes: 3 Motor power: 13 kW Speed: 24,000 rpm Automatic tool changer: yes TOOL MAGAZINE Number of tool magazines: 1 Tool slots: 12 Tool magazine: positioned at the head VACUUM SYSTEM Number of vacuum pumps: 1 Suction capacity: 250 m³/h CONTROL AND SOFTWARE Hodez Enz Uspfx Abkenu Control: PC-based control Programming software: Xylog Plus MACHINE DETAILS MAIN DRIVE Power of main electric spindle: 13 kW SAFETY CE marking: yes Protective guard: permanently mounted on the machine Safety system: front safety mats EQUIPMENT Aluminum nesting table Suction cups for workpiece clamping Vacuum pump Drilling unit with 11 drilling spindles Milling spindle with automatic tool changer Tool magazine with 12 tool slots PC-based control Programming software Xylog Plus Protective guard permanently mounted on the machine Front safety mats

Condition: used, Year of construction: 2017, Control Heidenhain TNC 640 x-travel 600 mm Hnjdjz Ic Afopfx Abkeu y-travel 450 mm z-travel 450 mm b-axis ° c-axis 360 ° spindle tunring speed 20.000 U/min Drive power at S1/S6 (40% duty cycle) 23/36 kW Torque at S1/S6 (40% duty cycle) 77/120 Nm tool taper HSK-A63 number of tool places 170 Pos. tool changing time

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: NM9278, travel distance X-axis: 750 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 600 mm, controller manufacturer: Fanuc, controller model: 16i-M, spindle speed (max.): 6,000 rpm, coolant supply: 70 bar, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, Pallet size: 550 x 550 mm Workpiece dimensions, max.: 730 x 900 mm Rapid traverse rate / max. feed rate: 36 m/min Travel range X: 750 mm Hodezy Hdgjpfx Abkjnu Travel range Y: 750 mm Travel range Z: 600 mm 1-degree tilting table Standard equipment: FANUC 16i-M control Shuttle changer (2 pallets) Internal chip conveyor Chip flushing system Spindle speed display Spindle power display Automatic shut-off 3-way signal lamp Hour counter Optional equipment: ATC60 magazine Speed: 6,000 rpm Tool holder: BT-50

Condition: refurbished (used), Overhauled Mazak main spindle for VTC 200 or VTC 300 for sale. The spindle has been fully overhauled, spindle bearings and intermediate sleeves have been replaced. The taper has been reground. Subsequently, it has been balanced. The maximum speed is 12,000 rpm. We have additional overhauled Mazak spindles in stock; feel free to send us your inquiry. This is an exchange spindle, meaning a core return is required. If you have any further questions, we are at your disposal. Hsdpfxjvdkdio Abksnu

Condition: used, Year of construction: 2013, .30 Base machine ACCORD 30 FX N. 1 CONCEPTCNC machining center with a moving gantry and a fixed worktable for processing various sheet-like materials: chipboard, MDF, laminated solid wood, plastic materials, and light alloys. STRUCTUREThe machine is developed using the best three-dimensional CAD systems for solid modeling. The machine bed and moving crossbeam represent the two main elements of the machine structure and are manufactured in the company's own foundry. All mechanical machining operations are carried out on special production equipment in a single setup to ensure optimal precision and to minimize tolerances during machining. The control cabinet is mounted directly on the machine bed, allowing for a very compact design and easy access. CONTROL UNITThe control unit consists of an industrial NC control system with an integrated office PC (desktop computer). The CNC solution with an office PC combines all the features of numerical control with the typical user-friendliness of an office PC, which greatly simplifies the control of the machine by enabling the use of the XILOG MAESTRO user interface, i.e., the software developed by SCM for simple and fast programming, even for non-experts. GENERAL FEATURESPassage height: - 250 mm with H50 accessories- 190 mm with H110 accessoriesPendulum machiningAutomatic lubrication of the axesAir conditioning system to maintain the correct internal temperature in the control cabinet. Software for remote customer serviceOperator interface Xilog MAESTRO with integrated CAD/CAM, which allows for the extremely simple execution of products even with special shapes.A number of advanced functions allow for: - programming via macros- creating and managing subprograms- optimizing machining- managing all machine functions- creating and managing a database of tools93.07.31 Voltage 400 EU 93.12.01 Frequency 50 Hz R0.00.03 LINGUA P.C. GERMAN 02.12.57 ACCORD 30 FX - Worktable X-Y = 3680x1380 56.05.25 No. 6 Support rail MATIC - L1300 The worktable is equipped with: - no. 2 lateral fixed supports- no. 6 aluminum supports, motor-driven and movable along the X-axis- motorized conveyor belt for unloading chipsEach movable support has: - no. 3 motor-driven support rails for clamping cylinders and vacuum suction cups- air blower for cleaning on each movable support- pneumatic locking/release for quick replacement of the clamping cylinders and vacuum suction cups- preparation for lifting devices- preparation for reference stopsThe workpiece vacuum clamping system is divided into 2 independent worktables.23.02.19 DUO Prisma K working unitThe working unit with 5 interpolating axes is located on the moving crossbeam, which provides maximum stability during milling and thus also ensures optimal machining quality of the workpieces, even with high material removal rates. It allows for rotation around the axes arranged at 50° to each other and has many advantages over traditional 5-axis working units, such as: - the full use of the work areas both with 5 axes and with a vertical spindle- spindle external dimensions outside the working area- a particularly light design for horizontal machiningThe unit has a central chip extraction system. Hnsdpfx Ajzl Ap Njbkou

Condition: used, Year of construction: 2018, functionality: fully functional, operating hours: 4,854 h, total height: 2,746 mm, total length: 2,810 mm, total width: 2,210 mm, rapid traverse Z-axis: 32 m/min, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, spindle speed (max.): 15,000 rpm, spindle speed (min.): 50 rpm, tool length: 300 mm, working range: 1,000 mm, Dear customer, we have an Okuma M460R-VE in very good condition in stock for you. Hnodpfx Abjvtfkiekeu We look forward to your inquiry and remain with best regards, Your Neff – The Okuma Specialist Team Technical data: Dimensions of the work table (L x W): 1000 x 460 mm Axis travel X/Y/Z: 762/460/460 mm Rapid traverse in the X/Y/Z axis: 40/40/32 m/min Maximum spindle speed: 15000 rpm Minimum spindle speed: 50 rpm Maximum tool length: 300 mm Positioning accuracy of the X, Y and Z axes: ± 0.004 mm Positioning repeatability of the X, Y, Z axes: ± 0.0015 mm Spindle taper: BT 40 Spindle torque: 146-199 Nm Connected load: 37.5 kVA Power supply: 3x 400 V; 50 Hz Dimensions (L x W x H): 2810 x 2210 x 2746 mm Weight of the machine: 6500 kg Equipment of the OKUMA M460R VE milling center: Tool magazine with 32 spaces Metrol tool breakage control Marposs radio measuring probe WRI Small coolant system with additional filter Chip conveyor About us: Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, a tour of our showroom (30 Okuma machines) including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as an instruction and subsequent service. We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts. Please visit our homepage for more information.

Condition: used, Year of construction: 2002, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Haas Machining Center 3 Axes + 1 Model VF-1DHE Year 2002 Hnsdpez Ir Nusfx Abkju Documentation Available Includes 4-Axis Rotary Table Video Available Inspection Possible

Condition: used, Year of construction: 2014, Control Heidenhain x-travel 1.000 mm y-travel 1.100 mm z-travel 1.040 mm tool taper HSK 63 number of tool places 338 Pos. Condition: Used Technical features & accessories: - TM218 tool changer Hedpsz Hz N Iofx Abkenu - KNOLL FKA/750 cooling unit - KNOLL KF220 belt filter - KNOLL 850K-1 chip conveyor Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change and errors in technical data and specifications; subject to prior sale.

Condition: used, Year of construction: 2016, Control Heidenhain x-travel 800 mm y-travel 1.020 mm z-travel 1.020 mm auto power on hours ca. 52.607 spindle hours ca. 26.021 h Condition: Used The machine has been overhauled by GROB. Technical features & accessories: - HYFRA cooling unit - KNOLL KF-220 belt filter - KNOLL 750K-1 chip conveyor - TM218-9 tool magazine - SCHULER LMC900 automatic pallet loader Hjdpfx Asz Hz Nhsbkjnu - 15-station pallet pool - Movable robot arm Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data/specifications, and prior sale.