Used Carbon for sale (907)

Condition: new, cutting range for steel to 12.0 TS mm cutting range for steel to 8.0 QS mm Gujdpfx Asw U U Tgecgoi capacity at 100% 30.0 Ampere cutting medium Druckluft output von 20 - 40 Ampere output Eingang 4.9 KW voltage 230 V weight 17.9 kg range L-W-H 480 x 210 x 340 mm The Avalon 40.1 is a lightweight, handy plasma cutting system with high cutting cutting performance and top cutting quality. Its low weight and easy handling handling make it the ideal candidate for trade, workshop and industry. industry. Cuts carbon steel, stainless steel, aluminum, copper ... Features - IGBT technology - Active PFC technology for high duty cycle and energy efficiency - Manual switch for activating the air flow to set the test air pressure . without having to trigger the burner. - Powerful compact unit - Intelligent protection function protects the plasma torch from damage * such as incorrect air pressure, missing wearing parts, overloading of the . pilot arc max. cut-off cut for carbon steel . 12.0 mm Optimum cutting thickness carbon steel .. 8.0 mm Stainless steel .. 8.0 mm Aluminum .. 4.0 mm Copper .. 3.0 mm Special equipment included : - 1x 3.0 m / earth cable - 1x 6.0 m / hand cutting torch "IPT-60 Coax" * Hand torch 70° * 6.0 m hose with rubber cover

Condition: new, cutting range for steel to 35.0 TS mm cutting range for steel to 25.0 QS mm ampere 20 - 65 Ampere cutting medium Druckluft voltage 400 V output Eingang 7.8 KW weight 51.5 kg range L-W-H 595 x 250 x 890 mm Avalon 65 AIR with integrated compressor Cutting - clean and reliable The Avalon 65 AIR air plasma cutting system with integrated compressor compressor is your reliable partner for demanding applications. use. With the Avalon 65 Air, you can make cuts up to a material thickness of material thickness of 35.0 mm. Features : - IGBT technology - with integrated compressor - Microprocessor control system for excellent and dynamic . Arc characteristics - CNC interface - HF-free arc starting system for increased reliability . and low EMF exposure - Manual switch for activating the air flow to set the test air pressure . without having to trigger the torch - Intelligent protection function protects the plasma torch Gujdpfsxaaicox Acgoi . from damage such as incorrect air pressure missing wear parts , . overloading of the pilot arc. * max. cutting thickness carbon steel = 35.0 mm (separating cut) * Optimal cutting thickness carbon steel = 25.0 mm (quality cut) * Stainless steel = 25.0 mm * Aluminum = 20.0 mm * Copper = 14.0 mm Special equipment included : - 1x 3.0 m / ground cable - 1x 6.0 m / hand cutting torch "IPT-60 Coax" * Hand torch 70° * 6.0 m hose with rubber cover

Condition: new, functionality: fully functional, Year of construction: 2026, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Guodpfx Ashwaa Ejcgji Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: JEWELliner "XS" PRO Modell "Premium", type of input current: AC, laser power: 30 W, total width: 400 mm, total height: 500 mm, total length: 600 mm, overall weight: 55 kg, warranty duration: 12 months, height adjustment type: electric, door opening width: 400 mm, door opening height: 200 mm, laser wavelength: 1,064 nm, Developed, produced and checked in Germany. JEWELliner "XS-PRO" model series "Premium" with 30W CW laser power include camera - electric lift door - auto-focus - compact machine dimension - Developed and produced in Germany - Other models, laser power and options on request. Engraving Laser (fiber technology) with security housing „LASER CLASS 1“. Compact designed, all components are in the housing and will be air cooled. Maintenance free! Materials: metals, ceramic and some plastics. Applications can found in the jewellery ans also in other production areas. machine dimension: L60xW40H50cm, to integrade simple into a production area. Samples of material: steel, stainless steel, gold, silver, titan, aluminium, brass, copper, brounce, carbon, ceramic, makrolon Possibilities of application: - graphic engraving (logo, draw, handdraws, signatures) - serial numbers - barcode, datamatrix, QR-code - ring inside (f.e. name, date, symbol, handwrite) optional - ring outside (f.e. name, endless graphic, endless pattern) optional - bangles inside/outside - optional - text (text straight, circled text, bowed text, text symbols) - handwrite - finger print - photo engraving (photos, pictures) - micro engraving (micro text till 0.25mm character high) - round engraving (engraving on round or bowed surfaces) optional main parts of JEWELliner "XS" PRO Modell "Premium" : - fiber laser unit with scan head and focus pointer - security housing „Laser Class 1“ with 200x140mm security glass - manual door opening - emergency button - 180° view area to the marking field - electrical z-axis for focus positioning - rotary axis with removable jewelry jaw chuck - configured engraving software - high resolution industrial camera USB 3.1 Specification: - laser technology: fiber laser - outputpower CW: 30W - available frequency: 1.8 - 2000kHz - connection type data: USB 2.0 - wave length: 1064nm Guodpfxjppxmkj Acgsi - lens (delivery): F-Theta 163 - marking field size: 110 x 110 mm – smaller possible - focus range: ca. 1.7 mm - min character high: 0.25 mm - min. line width: 0.023 mm - cooling: air cooled - maintenance: no service necessary - power: AC 110V / 240V – 50/60Hz – short cut save - dimension: L600 x W400 x H500 mm - weight: 55kg The engraving laser is after the delivery immediately ready to use. In this way, the machine can be integrated in the production very fast. The machines can be inspected and tested by appointment. Pictures can be different!

Condition: used, Year of construction: 1997, Overview This rotary pressure filling machine was manufactured in 1997 by NATE. The Veral 60-12 is designed for the filling and closing of beer and carbonated beverages in glass bottles. The machine operates as a pressure filler with vacuum pre-evacuation, ensuring stable filling conditions for carbonated products. It has been fully overhauled in 2023, including reconstruction of filler, capper and vacuum pump. The machine is not yet in production after rebuild and is prepared for PLC and control system integration (not included).  Technical data - Capacity: approx. 20,000 bph (500 ml) Guedpfjy Azrtsx Acgoi - Formats: 0.5 L long neck / 0.66 L / 1.0 L - Application: Filling of beer and carbonated beverages - Configuration: 60 filling valves / 12 capping heads - Filling system: Pressure filling with vacuum pre-evacuation - Filling pressure: approx. 0.05 – 0.06 MPa - Product temperature: approx. 1 – 7 °C - Material: Stainless steel (AISI 304 / 316)

Condition: used, Year of construction: 1992, Overview This carbonator was manufactured in 1992 by Germany KHS. The KHS CX 30 is designed for the production of carbonated mineral water. The unit was upgraded by KHS in 2014 and has a capacity of up to 30,000 litres per hour. The machine was in production until March 2025, was dismantled in December 2025, and is currently stored in a warehouse in Bippen. The machine is available immediately. Gujdpfxszavp He Acgji Technical data - Capacity: 30,000 litres/hour - Application: Carbonated mineral water - Configuration: Carbonator with pumps, tank, and accessories - CO₂ rate: max. 8 g/litre - Drive: Siemens S7 Scope of Delivery - Carbonator | KHS | CX 30 | 1992 (upgraded 2014) | Complete system - Pump system  - Tank | KHS  - Control system | Siemens | S7 

Condition: used, Year of construction: 2013, machine/vehicle number: LC685, Used DC GF 3-in-1 filling line, sparking water 6000 BPH, Year 2013Technical Specifications & Performance DataThis used bottling line is configured for PET bottle production and beverage filling, combining a linear blow molding machine, high-pressure compressed-air equipment, an integrated rinsing, filling and capping monoblock, labeling, coding, saturation and shrink-wrapping equipment. The line is designed for industrial packaging of carbonated, oxygenated and non-carbonated beverages.Blow molding capacity: 1,000–2,000 bphFilling monoblock capacity: 4,000–6,000 bph at 0.33LSupported bottle formats: 0.33L, 0.5L and 1.5LContainer material: PET bottles with PCO neck finishComplete line footprint: approximately 11 m × 6 mBlow molder configuration: linear, 2 cavities, 20–50 g preformsFilling monoblock: 18 rinsing stations, 18 filling valves and 6 capping headsAdvanced Automation & Control SystemsThe line includes Mitsubishi PLC control for the filling and handling process. The filling monoblock uses an electronic filling system and operates with clockwise bottle movement. Safety functions are fitted on the blow molding machine, compressor and filling monoblock, while safety covers are included for the complete line.Electrical supply for the blow molder and compressor: 400 V, 15 kW, 50 HzElectrical supply for the filling monoblock: 400 V, 3.5 kW, 50 HzElectronic non-isobaric filling systemPCO 32 and PCO 28 cap compatibilityIntegrated HS-Datu dating unit for production codingProduction Line Integration CapabilitiesThis complete PET bottling line follows a practical process flow from bottle forming through filling, labeling and secondary packaging. The linear blower is supplied with a preform feeder, preform tipper, 30 bar three-stage compressor, cooling dryer and air filter. Downstream equipment includes a self-adhesive labeling machine, vacuum saturator, conveyor system and automatic shrink film wrapper.Machine typeManufacturer / modelYearBlow Molding MachineECENG MACHINERY Co. Ltd.2010CompressorChina2010Filling MonoblockDC GF 3-in-12013SaturatorVacuum saturatorLabeling MachineSelf-adhesive labelerShrink Wrap... Gsdpfxe Adyt Ts Acgsui

Condition: used, Year of construction: 1998, machine/vehicle number: M325, Used SIMONAZZI EUROSTAR RAA 282 filling triblockTechnical Specifications & Performance DataThis Rotary Filling Monoblock is engineered for PET bottle handling and optimized for water and carbonated soft drink applications. Manufactured by Simonazzi, model Eurostar RAA282, it combines robust rotary filling technology with integrated capping to deliver consistent performance in beverage production and industrial packaging environments. As part of a used bottling line or a second hand upgrade, it offers reliable throughput and quality results.Manufacturer: SimonazziModel: Eurostar RAA282Year of manufacture: 1998Configuration: Rotary filling monoblock with integrated capper (Arol)Maximum speed: 18,000 bottles/hourCurrent bottle format: 1.5LCompatible containers: PET bottlesMaximum bottle height: 320 mmMachine pitch: 110 mmWorking direction: ClockwiseTransfer type: Neck handlingCO2 capability: Yes (isobaric operation for carbonated products)Advanced Automation & Control SystemsThe monoblock leverages proven rotary mechanics to ensure smooth container handling and stable filling at high speeds. Neck-handling transfer minimizes scuffing and maintains accurate alignment through the filling and capping phases. Standard operator controls facilitate format adjustments, while machine guarding supports safe operation on modern beverage production lines.Rotary motion for continuous, high-efficiency fillingNeck-handling for stable PET bottle controlIntegrated capping turret by Arol for synchronized operationOperator-friendly controls and adjustable settings for format changesSafety guards and interlocks supporting compliant operationProduction Line Integration CapabilitiesThis monoblock integrates seamlessly into upstream and downstream bottling equipment within a used bottling line or a complete beverage production system. Its neck-handling design simplifies alignment with infeed/outfeed conveyors and downstream inspection, labeling, and packaging machinery.Inline operation with standard conveyor interfacesSuitable for PET lines dedicated to water and soft drinksCurrent setup for 1.5L; format change parts can be configured as requiredCompatible with typical line components such as inspectors, labelers, and packersMachine Condition & Maintenance HistoryThe unit is refurbished, guaranteed, and ready for operation. It is supplied with compatible spare parts to support startup and routine maintenance. This condition profile makes it a compelling choice for second hand bottling equipment buyers seeking minimized commissioning risk and predictable performance.Refurbished and guaranteedReady for immediate useDelivered with compatible spare partsInspection available by appointmentWarranty: 6 monthsOperationa... Gusdj Adyyyopfx Acgei

Condition: used, Year of construction: 2015, machine/vehicle number: M340, Used Meheen M6 Isobaric filling monoblock 2160 BPHTechnical Specifications & Performance DataThe Meheen M6 is an isobaric filling monoblock designed to deliver reliable performance for carbonated beverage bottling. Combining rinsing, filling, and capping in a single compact unit, it supports efficient small to mid-scale beverage production with precise counter-pressure control. Built in AISI 304 stainless steel, the machine offers hygienic construction suitable for industrial packaging environments and continuous operation.Filling technology: Isobaric, counter-pressure system for carbonated beveragesNo. of filling heads: 6Production speed: 2,100–2,160 bottles per hourCompatible formats: 0.33L bottlesCap size: 26mm Rinser: 24 - bottle rinser; submersible pump and container filled with cleaning or sanitising solution. Integrated modules: Bottle rinsing station, isobaric filler, capperControl interface: Touchscreen HMI for operation and adjustmentsConstruction: AISI 304 stainless steelManufacturer: MeheenModel: M6Advanced Automation & Control SystemsThe Meheen M6 integrates a modern touchscreen HMI to streamline setup and operation. Operators can monitor filling parameters associated with counter-pressure operation, manage start/stop sequences, and oversee bottle handling from rinse through cap application. Isobaric control ensures stable product handling for carbonated beverages, supporting consistent fill levels and minimizing product loss.Production Line Integration CapabilitiesThis monoblock can work as a standalone station or be integrated into a used bottling line as part of a complete beverage production setup. Its compact footprint simplifies placement on existing conveyor systems and facilitates upstream and downstream connectivity with inspection, labeling, or packaging machinery. Format handling for 0.33L bottles is supported, and integration into broader industrial packaging lines is straightforward due to its combined rinsing, filling, and capping architecture.Machine Condition & Maintenance HistoryThis second hand monoblock is presented in working condition and ready for operation, suitable for rapid deployment in beverage production. Its stainless steel construction supports cleanability and long-term durability typical of professional bottling equipment.Operational Performance & VersatilityEngineered for carbonated beverage applications, the counter-pressure filling system maintains product quality and carbonation. The 6-head configuration balances throughput and precision, making it a strong choice for producers aiming to expand capacity with dependable bottling equipment. The integrated bottle rinsing station and capper reduce handling steps, improve line efficiency, and minimize space requirements compared to separate stand-alone machines.Installation Requirements & Site PreparationThe compact monoblock layout facilitates installation in existing beverage production areas. Utilities typically required for rinsing, fil... Gsdpfs Ady A Ujx Acgoui

Year of construction: 2006, condition: used, machine/vehicle number: PX20, Used KHS INNOPRO CMX-18 mixer 18 m³-h - Year 2006Technical Specifications & Performance DataThe KHS INNOPRO CMX-18 is a premix mixer designed for beverage production and integration into an industrial packaging or used bottling line. Manufactured in 2006, this process unit has a nominal capacity of 18 m³/h and is engineered to prepare, deaerate, mix and transfer beverage product toward the filling area.Manufacturer: KHSModel: INNOPRO CMX-18Manufacturing year: 2006Nominal capacity: 18 m³/hBuffer tank capacity: 850 LMaximum pressure: 8 barTest pressure: 11.44 barTemperature range: 20 / 100 °CAdvanced Automation & Control SystemsThe premix system includes process instrumentation for pressure, flow and level monitoring. Flow transmitters, flow-indicating controllers, pressure indicators, pressure alarms, pressure switches, level switches and level alarms support controlled product handling through the deaeration, transfer and buffer stages.Control air is supplied at 4–5 bar, with an associated gas or air line indicated at 6–6.5 bar. The process arrangement includes controlled flow sections and valve manifolds for product routing, CIP circulation and syrup-return functions.Production Line Integration CapabilitiesThis KHS premix mixer is suited to installation upstream of a filler in a beverage production line. The process schematic shows a dedicated outlet connection to the filler, allowing the prepared product to be transferred from the buffer tank to downstream filling equipment.Water and CIP connections are integrated into the valve manifold, while dedicated CIP syrup-return branches support cleaning and product-return operations. The system uses carbon dioxide supply connections for deaeration and beverage preparation, making it appropriate for production environments where controlled mixing and gas management are required.Water connection: Ø2.1/2"CIP connection: Ø2.1/2"CIP syrup-return connections: Ø1.1/2"Filler outlet connection: Ø4"Sealing-water connection: DN15Machine Condition & Maintenance HistoryThis second hand KHS premix mixer was manufactured in 2006. The available technical documentation identifies the process configuration, vessel ratings, utility connections and instrumentation layout. The equipment is configured as a complete mixing and transfer unit with deaeration, buffer storage, pumps and process-control instruments.Operational Performance & VersatilityThe INNOPRO CMX-18 incorporates a deaeration vessel, buffer tank, six pumps and a product-transfer circuit. Product passes through controlled flow sections before entering the buffer tank and being pumped toward the filler. Carbon dioxide connections, deaeration capability and a dedicated buffer stage support stable product preparation before packaging.The integrated CIP and syrup-return manifold enables cleaning circulation through the process circuit. This configuration is valuable for beverage production operations requiring hygienic product changeover and e... Gjdpfx Ao Adtqrocgsui

Condition: used, Year of construction: 2016, machine/vehicle number: M296, Used Filling Monoblock ALFATEK Elvira for beer 2000 bph Gujdj Adt Taspfx Acgsi General Characteristics of the Used Filling Monoblock ALFATEK Elvira for beer 2000 bph The Used Filling Monoblock ALFATEK Elvira for beer 2000 bph serves as a filling system specifically designed for bottling beer in glass containers, ideal for artisanal or semi-industrial production lines. Alfatek built the unit in 2016, and the Elvira 3/9/1 model handles a production speed of 2000 bottles per hour in the 33 cl format, while also supporting the 75 cl format. Therefore, it meets the needs of breweries with varying product volumes. Moreover, its configuration allows easy integration into existing lines. In particular, this monoblock suits breweries focused on maintaining product quality. Mechanical Configuration and Working Direction The machine operates with a clockwise rotation and includes certified safety guards, which ensure compliance with workplace safety regulations. Furthermore, the safety system prevents accidental operator contact with moving parts. Currently, the Used Filling Monoblock ALFATEK Elvira for beer 2000 bph remains offline but fully functional. In addition, all technical manuals are available, and the system has undergone regular maintenance and revision. As a result, the machine retains its mechanical integrity. Thus, it stands ready for immediate use upon installation. Light Pressure Filling System At the core of the Used Filling Monoblock ALFATEK Elvira for beer 2000 bph lies the filler with 9 valves, configured for light pressure filling. Notably, this system is ideal for beer, as it preserves carbonation and minimizes agitation. Consequently, it prevents foaming and ensures a clean fill level. The system ensures precision, consistency, and compatibility with 33 cl and 75 cl glass bottles. Additionally, operators can clean and maintain the valves with ease. In other words, this machine simplifies process control. Therefore, it supports stable and hygienic production. Single-Head Capper for Two Cap Sizes The capping unit, integrated into the monoblock, features a single head for crown caps, compatible with 26 mm and 29 mm diameters. The capper, manufactured by AROL, offers high reliability and synchronizes perfectly with the filling phase. Moreover, its construction ensures durability even under regular use. As such, it guarantees a secure seal for each container. Besides that, the capper minimizes the risk of misalignment. For this reason, many small breweries prefer this model for its simplicity and efficiency. Product Application and Container Type Manufacturers designed the Used Filling Monoblock ALFATEK Elvira for beer 2000 bph specifically for beer bottling in glass containers. The machine does not support plastic or can formats. Because of this, it best suits craft breweries seeking high-quality packaging solutions. The light pressure filling system preserves the beer’s organoleptic properties and maintains its effervescence. In contrast, gravity filling would compromise carbonation. Therefore, this setup remains optimal for delicate products. Furthermore, the glass packaging ensures longer shelf life and consumer appeal. Operational Condition and Spare Parts The monoblock remains in good working condition and is available for functional testing. Even though it is no longer in production, it maintains its full operability. A full set of origi...

Condition: excellent (used), Stainless steel ice cube machine 220 V 75 kg/day, nuggets, 32 kg storage container, air cooling 640 x 600 x 800 mm (W x D x H) Includes Britta water filter Purity 1200 Steam These filter cartridges reduce the carbonate hardness in tap water, thus preventing limescale deposits in the machine. In addition, heavy metal ions such as lead and copper, turbidity, organic contaminants, and other odor-causing substances such as chlorine residues are filtered out. Gsde Ab E Svjpfx Acgoui

Condition: used, clear span: 3,595 mm, total length: 18,575 mm, total height: 9,500 mm, load per truss pair (max.): 2,650 kg, Technical data for the pallet racking system: Racking system: Mecalux Technical data for the installation: Number of racking rows: 1 Length per racking row: approx. 18,575 mm Number of bays per racking row: 05, each 3,595 mm Number of levels including floor level: 04 Technical data for the volume: Pallet spaces per bay: 20 Pallet spaces per racking row: 100 Total pallet spaces: 100 Based on: Load handling unit: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height including pallet: not specified Weight per pallet (max.): 660 kg Included in the scope of delivery: 06x Pallet racking uprights, used Material color: blue Upright profile dimensions: 100 x 69 x 2.0 mm Upright type: M-101-P Including cross and diagonal braces Base plates The uprights are pre-assembled (bolted frame) 9,500 mm high 1,100 mm deep 40x Pallet racking beam, used Beam type: 2C-S 1315 Material color: orange Box profile: 130 x 50 mm Godpfx Acoz A Awxegjui Connector: 4 hooks Clear span: 3,595 mm Max. load per beam pair: 2,650 kg, with evenly distributed load 80x Integrated safety pin, used To secure the longitudinal beams against unintentional lifting out 24x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 12x Shimming plate, used Design: fully galvanized to level the racking uprights that are installed on uneven ground 01x Load sign with information on bay and shelf loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, clear span: 3,595 mm, total length: 18,575 mm, load per truss pair (max.): 2,650 kg, Technical data for the pallet racking system: Racking system: Mecalux Technical data for installation: Number of racking bays: 01 unit Length per racking bay: approx. 18,575 mm Number of bays per racking bay: 05 units Number of levels including floor level: 02 units Technical data for volume: Pallet spaces per bay: 12 units Pallet spaces per row: 60 units Total pallet spaces: 60 units Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: not specified Weight per pallet (max.): 660 kg Included in the scope of supply: 06x Pallet racking uprights, used Material color: blue Upright profile dimensions: 100 x 69 x 2.0 mm Upright type: M-101 Including cross and diagonal braces, Base plates The uprights are pre-assembled (bolted framework) 2,500 mm high 1,100 mm deep 20x Pallet racking beams, used Material color: RAL 2001 orange Beam type: 2C-S 1315 Box profile: 130 x 50 mm Clear width: 3,595 mm Maximum load per beam pair: 2,650 kg with evenly distributed load 40x Locking pin, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting out 24x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 12x Shimming plate, used Design: fully galvanized Gsdpfsz A A Ausx Acgsui For leveling the racking uprights that are installed on uneven ground 01x Load sign With information on bay and frame loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, mileage: 32 km, power: 90 kW (122.37 HP), first registration: 08/2026, fuel type: diesel, overall weight: 2,400 kg, color: grey, gearing type: mechanical, number of seats: 2, total length: 4,853 mm, total width: 1,855 mm, total height: 1,842 mm, loading space length: 2,001 mm, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal number: 4266.NW26.X027423 Errors and prior sale excepted! ----SPECIAL EQUIPMENT * Towing hitch, fixed - incl. ESP trailer stabilization and continuous power supply * Wheels: All-season tires. The tires are marked with the "3 Peak Mountain Snow Flake (PMSF)" snowflake symbol. * Sliding door, left and right * Seat package 56: Driver and passenger seats individually and variably heated - steering wheel, heated - driver and passenger seats 4-way manually adjustable - lumbar support for driver, 2-way adjustable - passenger seat, foldable with integrated work surface - airbag package, consisting of head and shoulder airbags, and side airbags for driver and passenger * Auxiliary heater, fuel-powered, programmable via on-board computer FURTHER EQUIPMENT * Airbag, driver and passenger side * Airbag: Passenger airbag deactivation function * Alcohol interlock (preparation) * All-wheel drive * ABS - with ESP, hill start assist and traction control * Exterior mirrors elect. foldable, adjustable and heated * Floor covering, rubberized, front * On-board computer * Roof storage compartment, front * Roof rails, preparation kit * Theft/alarm system with interior monitoring * Diesel particulate filter with SCR catalytic converter and AdBlue tank * Double-wing tailgate with 180° opening angle (without window) * Remote control: 2nd remote control key for central locking * Windshield, heated * Glove compartment with lid, illuminated * Interior lighting, front with delay switch and two reading lights * Interior lighting, cargo area - 2 LED lights * Air conditioning with automatic temperature control (2-zone) for driver and passenger side, separately adjustable * Cargo area floor: vinyl floor covering * Charging station, inductive * Steering wheel: Multifunction leather steering wheel * Steering column, adjustable in height and reach * Headlight range adjustment * Fog lights with static cornering light * Package: Driver Assistance Package 3 KeyFree system with Ford Power Start function - Intelligent Adaptive Cruise Control IACC - Blind Spot Assist with Cross Traffic Alert - Emergency braking function - Exit warning - Pre-Collision Assist, pedestrian and cyclist detection - Traffic sign recognition - Driver drowsiness warning - Lane Keeping Assist - Park Pilot system front, rear - Rear view camera - Hill start assist - 10-inch touchscreen, DAB/DAB+ and navigation - 10.25-inch digital instrument panel - FordPass Connect, eCall emergency call assistant - Android Auto, Apple CP 2 USB-C with voice control * Upholstery: Fabric * Tire pressure monitoring system * Wheels: Alloy wheels 7 J x 17 with 215/55 R17 tires * Wheels: Tire repair kit * Windshield wipers with rain sensor * Headlights - low beam: Halogen headlights with daytime running lights * Headlight assistant with day/night sensor * Side wall cladding, half-high * Power steering, electro-mechanical EPAS * Seatbelts, front * Sun visor, driver and passenger - with mirror and ticket holder, not illuminated * Start-stop system Guedpfxoz Emrle Acgji * Dust and pollen filter - without activated carbon filter * Socket: 12-volt socket - 1x front and 1x in the cargo area * Daytime running lights * Partition, full, without window (plastic) * Door interior trim, front - with illuminated switches including door compartments for 1.5 L bottles * Immobilizer, electronic * Central locking with remote control * Auxiliary heater, electric ... and more. ----1st owner. German version. Errors and prior sale excepted. 2 years manufacture

Condition: used, mileage: 32 km, power: 75 kW (101.97 HP), first registration: 08/2026, fuel type: diesel, overall weight: 2,300 kg, color: black, gearing type: mechanical, number of seats: 2, total length: 4,853 mm, total width: 1,855 mm, total height: 1,842 mm, loading space length: 2,001 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal Number: 4233.NW26.X027522 Errors and prior sale excepted! SPECIAL EQUIPMENT * Wheels: All-season tires * Rear view camera * Sliding door, right and left * Seat Package 50: Driver and passenger seat individually and variably heated - Driver's seat, 4-way manually adjustable - Passenger seat, 2-way manually adjustable - Airbag package, consisting of head and shoulder airbags, as well as side airbags for driver and passenger OTHER EQUIPMENT * Airbag, driver and passenger side * Airbag: Passenger airbag deactivation function * Alcohol interlock system * ABS - with ESP, hill start assist and traction control * Exterior mirrors, electrically adjustable and heated * Floor covering, rubber, front * On-board computer * Roof storage compartment, front * Roof rails, preparation kit * Diesel particulate filter with SCR catalyst and AdBlue tank * Double-wing rear door with 180° opening angle (without window) * Omission of cargo area floor * Power windows, front * Remote control: 2nd remote control key for central locking - instead of conventional key * Interior lighting, front with delay function and two reading lights * Interior lighting, cargo area - 1 light * Air conditioning, front including semi-electronic recirculation function * Headrests, height-adjustable * Steering column, adjustable in height and reach * Headlight leveling * Fog lights with static cornering lights * Package: Driver Assistance Package 1 Pre-Collision Assist including collision warning system, pedestrian, bicycle and oncoming traffic detection - Cruise control with adjustable speed limiter - Traffic sign recognition system - Driver fatigue warning - Lane Keeping Assist including Lane Departure Warning - Parking Assist System front and rear - Hill start assist - 10-inch touchscreen with DAB/DAB+ and navigation - 10.25-inch digital instrument panel - FordPass Connect including eCall emergency call assistant - Android Auto, Apple CarPlay - 2 USB-C ports, front - Voice control * Upholstery: Fabric * Tire pressure monitoring system * Wheels: Tire repair kit * Wheels: Steel wheels 6.5 J x 17 with 215/55 R 17 tires in 10-spoke design * Windshield washer fluid reservoir * Headlights, low beam: Halogen headlights with daytime running lights * Headlight assistant with day/night sensor * Side wall paneling, half-height * Power steering, electro-mechanical EPAS * Seat belts, front Gjdpfx Acjz Emr Esgoui * Sun visor, driver's side - with ticket holder and mirror, illuminated * Start-stop system * Dust and pollen filter - without activated carbon filter * Socket: 12-volt socket - 1x front and 1x in the cargo area * Daytime running lights * Partition, full, without window (plastic) * Immobilizer, electronic * Central locking with remote control * Auxiliary heater, electric ... and more. ----1st hand. German version. Errors and prior sale excepted. 2 years manufacturer's warranty from date of first registration (extendable upon request). We will gladly accept your vehicle in trade. Financing/leasing also possible without a down payment! Do you have any further questions? We will be happy to advise you! Although controls are in place, a deviation of the vehicle from the description above cannot be ruled out. We would like to point out that the vehicle description only serves to generally identify the vehicle and does not constitute a guarantee in the legal sense. The only agreements that apply are those in the order confirmation or the purchase contract. You will receive the exact scope of equipme

Condition: used, Year of construction: 2011, Overview Complete turnkey craft brewery built around a 4-vessel Newlands Systems (NSI) brewhouse with a 35 hl brew length, delivered from Canada and installed in 2011-2013. The plant covers the full process chain: malt intake and milling, brewhouse, fermentation and maturation, yeast handling, CIP, steam and glycol cooling. Fermentation capacity is 9 x 70 hl cylindroconical fermenters plus 2 x 70 hl pressure-rated bright beer tanks. The brewhouse runs on a Siemens Braumat control system. The brewery is still installed and under power and can be visited in operation. Technical data - Manufacturer: Newlands Systems (NSI), Canada - Year of manufacture: 2011-2016 - Machine type: complete turnkey brewery, 4-vessel brewhouse - Brew length: 35 hl - Brewhouse vessels: mash mixer 44 hl, lauter tun 69.85 hl, boil kettle 58 hl, whirlpool - Fermentation and maturation: 9 x 70 hl fermenters, 2 x 70 hl bright beer tanks - Steam: 750 kW electric steam boiler, operating pressure approx. 4 bar - Control system: Siemens Braumat - Power supply: 3 x 400 V / 50 Hz Scope of Delivery - Brewhouse | Newlands Systems | 4-vessel, 35 hl brew length | Mash mixer, lauter tun with rakes, boil kettle with internal calandria, whirlpool, wort heat exchanger, progressive cavity grain-out and spent grains pumps, post-whirlpool solids filter | 2011 - Control system | Siemens | Braumat | Brewhouse control panel and operator station | 2011 - Hot liquor tanks | Newlands Systems | 2 x 60 hl, stacked | External steam heat exchanger, pumps and valving, 316 stainless wetted surfaces, water treatment dosing bin | 2012 - Fermenters | Newlands Systems | 9 x 70 hl working volume | Cylindroconical, 60 degree cones, standpipes, cooling jackets | 2012-2013 - Bright beer tanks | Newlands Systems | 2 x 70 hl working volume | Pressure rated, carbonation stone assemblies | 2012-2013 - Yeast storage tank | Newlands Systems | 700 l | Conical, cooling jacket, mixer | 2013 - Yeast propagator | Newlands Systems | 240 l working volume | 300 l total volume, AISI 304 stainless steel | 2012 - CIP station | Newlands Systems | Steam heating and pump | 2012 - Malt silo | MAFA Sweden | UNB 70 | 30 t capacity, outdoor installation | 2012 - Auger system | MAFA Sweden | Silo and mill connections, flexible auger, specialty grains dump hopper | 2012 - Malt mill | Bühler | 4-roller | 3.0 kW drive, ATEX marked | 2012 - Grist hopper | Newlands Systems | 1,000 kg | On load cells | 2012 - Electric steam boiler | Pannpartner | 750 kW | 3 x 400 V / 50 Hz, design pressure 16 bar, empty weight 800 kg, CE marked | 2011 - Glycol chiller | Daikin | Air-cooled water chiller, refrigerant R407C, 400 V | 2011 Guedpszza Diofx Acgji - Sterile air unit | Donaldson | 2016 - Pumps, fittings and accessories | 2012-2013 Condition Used - still installed and under power, available for inspection in production. Availability Immediately. Location: Norway. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: ready for operation (used), Fanuc carbon brush holder, likely A06B-0651-B012, for motor with carbon brushes, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Gujdpfx Asz D Rm Recgei

Condition: new, Year of construction: 2026, table length 3048 mm table width 1524 mm burner heads 1 Control CNC workpiece weight 1095 kg traversing speed 180 m/min weight 4150 kg dimensions of the machine ca. 9392 x 2232 x 2307 mm Laser cutting system with automatic shuttle table configuration 1. Bodor Power 12kW laser source 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system Guedpfxox I Sglo Acgsi 4. mortise-and-tenon nameplate welded segmented bed 5. stretched aluminum gantry 6. bodor servo motor and driver 7. bodor rack and pinion 8. one-click processing 9. bodor lightning perforation technology 10. expert database for high-speed cutting 11. automatic adjustment of cutting gas pressure 12. open door protection 13. alarm function for cutting malfunction 14. ergonomic remote control (Bodor Mango®) 15. active anti-collision function 16. intelligent anti-shake 17. gas-saving continuous flow nozzle 18. intelligent maintenance reminder 19. WIFI internet connection 20. water cooler 21. extraction system 22. wear parts set CUTTING CAPACITY: CARBON STEEL (mm) 35 STAINLESS STEEL (mm) 35 ALUMINIUM (mm) 25 OPTIONAL: LANTEK EXPERT II CUT Sotware incl. postprocessor

Condition: used, Year of construction: 1998, Overview This carton packing line was manufactured in 1999 by the French company SAVOYE. The line has been professionally dismantled and is currently stored in a closed warehouse. It is designed for the packing of beer and carbonated beverages into various carton configurations and includes all necessary conveyors and technical documentation. Technical data - Manufacturer: SAVOYE Guodpfx Aewb D D Ajcgji - Models: SAVOYE 15 35, SAVOYE 07 10, SAVOYE 27 15 3B - Year: 1999 - Capacity: Up to 6,000 bottles/hour - Product types: Carton - Bottle diameters supported: 70mm, 80mm, 90mm - Carton formats: - 75cl – 2x(3x2) - 75cl – 4x3 - Documentation: Available - Machine status: Dismantled and stored indoors

Condition: new, cutting range for steel to 15.0 TS mm cutting range for steel to 10.0 QS mm capacity at 100% 25.0 Ampere cutting medium Druckluft Gsdpsxaavcjfx Acgjui output von 20 - 40 Ampere voltage 230 V Air consumption 230 l/min. output Eingang 4.9 KW weight 8.0 kg range L-W-H 505 x 147 x 305 mm The Avalon 40.1 is a lightweight, handy plasma cutting system with high cutting cutting performance and top cutting quality. Its low weight and easy handling handling make it the ideal candidate for trade, workshop and industry. industry. Cuts carbon steel, stainless steel, aluminum, copper ... Features - IGBT technology - Active PFC technology for high duty cycle and energy efficiency - Manual switch for activating the air flow to set the test air pressure . without having to trigger the burner. - Powerful compact unit - Intelligent protection function protects the plasma torch from damage * such as incorrect air pressure, missing wearing parts, overloading of the . pilot arc max. cut for carbon steel .. 15.0 mm Optimum cutting thickness carbon steel .. 10.0 mm Stainless steel .. 10.0 mm Aluminum .. 6.0 mm Copper .. 5.0 mm Special equipment included : - 1x 3.0 m / earth cable - 1x 6.0 m / hand cutting torch "IPT-60 Coax" * Hand torch 70° * 6.0 m hose with rubber cover

Condition: new, functionality: fully functional, Year of construction: 2024, laser power: 6,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 12 mm, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Gjdpjut Sw Eefx Acgjui Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: used, Year of construction: 2011, Overview  This filling line for non-carbonated beverages in PET bottles was manufactured in 2011 and comprises a filtration system, a filling and capping machine, a labeling machine and a pallet wrapping machine. It is designed for bottle sizes from 1.5L to 5L. The line is being sold as the factory has been closed. All machines are professionally stored and can be inspected on site. Technical details  - Filtration system | GYM Internacional | 8000 | 2011 - Manufacturer: GYM Internacional - Model: 8000 - Year of manufacture: 2011 - Capacity: 8,000 L/h - Power consumption: 4 kW - Dimensions: 2,500 x 1,500 x 100 mm - Weight: 1,110 kg - Bacteriological filtration through housing system - Automatic filling monoblock | GYM Internacional | Grupo 9-1. PK | 2011 - Bottle formats: 1.5L & 5L PET Gjdpev E Haisfx Acgsui - Output: - 1,600 bottles/hour (1.5L) - 700 bottles/hour (5L) - Filling heads: 9 - Capping heads: 1 (screw cap) - Bottle diameter: Min. 120 mm, max. 300 mm - Bottle height: 250-400 mm - Direction of rotation: clockwise - Power consumption: 3.5 kW - Dimensions: 4,000 x 3,000 x 3,500 mm - Weight: 2,500 kg - Rotary labeling machine | NEWTEC | LEOPARD HM 720 F6 S1E1 | 2011 - Output: 3,000 bottles/hour - Dimensions: 2,750 x 1,700 x 1,780 mm - Weight: 3,500 kg - Pallet wrapper (semi-automatic) | ECOPLAT | ECOPLAT BASE | 2011 - Capacity: 35 pallets/hour - Type: Turntable - Control system: PLC - Max. Pallet weight: 2,000 kg - Semi-automatic - Dimensions: 2,439 x 1,500 x 2,580 mm - Weight: 1,200 kg  

Condition: used, mileage: 43,000 km, power: 338 kW (459.55 HP), first registration: 07/2020, fuel type: gasoline, color: white, gearing type: automatic, emission class: euro6, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, navigation system, parking heater, Special Equipment: - Auxiliary heater (standalone) - Electrically retractable tow bar - Burmester high-end surround sound system - Panoramic sliding sunroof - Matrix LED headlights with PDLS+ (Porsche Dynamic Light System Plus) - Head-up display - Porsche Entry & Drive (comfort access) - 21" Sport Design alloy wheels - Set of summer and winter tires - Adaptive sports seats (18-way adjustment) with memory function - Sport Chrono package - Air suspension with PASM (Porsche Active Suspension Management) - Privacy glazing - Reversing camera & park assist - Adaptive cruise control (ACC) - PCM navigation, Apple CarPlay, DAB+ - Purchased directly from Porsche (not a grey import) Gedpfxjz El I Ej Acgoui - Full service history (Porsche service booklet maintained) - Technically and visually in very good condition - Porsche Approved warranty valid until end of last year, not renewed afterwards (vehicle runs perfectly) Additional features: - Storage package - Ambient lighting - Driver assistance system: park assist with reversing camera - Lane keeping assist - Floor mats - Head-up display - Isofix mounting points for child seat on front passenger seat - Comfort access (keyless entry) - Alloy wheels front/rear: 9.5x21 / 11.5x21 (Exclusive Design wheels, black high gloss finish) - Matrix LED headlights including Porsche Dynamic Light System Plus (PDLS+) - Two-part front panoramic sliding roof, electric - Digital radio (DAB+) - Rear side airbags - Power steering Plus (speed-dependent) - Burmester high-end surround sound system - Auxiliary heater (standalone) - Rear privacy glass (tinted) Further Equipment: - Smartphone storage compartment - Adaptive sports seats including 18-way adjustment and memory package - Driver and passenger airbags - Active engine hood - Anti-slip regulation (ASR) - All-wheel drive - Aspheric left exterior mirror - Electrically folding exterior mirrors - Electrically adjustable & heated exterior mirrors - Exterior mirrors with automatic dimming - LED exterior mirror surrounds - LED turn signal lights - Red-painted brake calipers - Connect Plus (Bluetooth, Apple CarPlay, WLAN, Vehicle Tracking System) - Alcantara roof lining - Burglar alarm with interior monitoring - Automatic headlight activation - Illuminated door sill trims with model designation (Black aluminum) - High-gloss black window trims - Acoustic insulation windshield with top filter band - Luggage compartment cover/roller blind - 8-speed PDK (dual-clutch transmission) - Cup holders - Automatic tailgate operation (open/close) - Tinted LED tail lights - Rear window wiper - Adaptive rear spoiler (2-way) - Interior active carbon air filter (odor filter) - Interior mirror with automatic dimming - Interior package: Brushed aluminum, black - Interior package: GTS (leather/Alcantara) - Isofix mountings for rear child seats - 4-door body - 2-zone automatic climate control - Knee airbag - Curtain airbag system - Porsche Side Impact Protection System (POSIP) – head/side airbag system - Fuel tank: 90 liters - Heated sport steering wheel (Alcantara, 3-spoke) with shift paddles - Black painted fender air outlet grilles - Painted model designation - Engine: 4.0-liter V8 turbo (338 kW) - Petrol particulate filter (OPF) - Electric parking brake - PASM – Porsche Active Suspension Management - PCM – Porsche Communication Management incl. online navigation module - Porsche Traction Management (PTM) - Tire repair kit - Tire pressure monitoring system - Split-folding rear seat backrest (40:20:40) - Low-emis

Condition: used, mileage: 179,000 km, power: 190 kW (258.33 HP), fuel type: diesel, gearing type: automatic, first registration: 12/2016, next inspection (TÜV): 09/2028, emission class: euro6, color: black, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, navigation system, soot filter, Special equipment: Gjdpfxoz Sv Hte Acgoui Exterior/interior mirror with automatic anti-glare function, Connect Plus (Bluetooth, Apple CarPlay, WLAN, Vehicle Tracking System), Porsche Car Connect, Driver Memory Package, Window trim strips, black (high-gloss), Front panel, stainless steel, Floor mats, Compass system in the instrument cluster, Fuel tank: 75 liters, Lighting Comfort Package, Porsche Communication Management (PCM) incl. DVD navigation module, Digital radio reception (DAB+), Smoker's package, Front seat heating, Sunblind on side windows in the rear, Burmester High-End Surround sound system, Voice control system Additional equipment: 3rd brake light, Passenger airbag can be deactivated, Airbag driver/passenger side, Acoustic package, Trailer stabilization program, Trailer coupling preparation, Anti-slip control (ASR), Automatic brake differential (ABD), Exterior mirror, aspherical, left, Exterior mirror, electrically foldable, Exterior mirror, electrically adjustable and heated, Turn indicators, LED, On-board computer, Brake calipers, silver anodized, Automatic activation of headlights, Door sill trims (aluminum), Driver assistance system: Multi-collision brake, Power windows, front + rear, Windshield with band filter at the top, Cup holders, Rear lights, LED, Rear window, heated, Interior: Standard equipment, synthetic leather / Alcantara, Interior filter: Activated carbon filter (odor filter), Interior package: black (high-gloss), Isofix mounts for child seat in the rear seat, Body: 4-door, Automatic climate control, 3-zone, Comfort headrests, Comfort seats, front, Head airbag system (curtain airbag), Loading edge protection (aluminum), Steering wheel (sports/leather, 3-spoke) with multi-function and gearshift function, Light alloy rims, Engine 3.0 liters - 190 kW V6 TDI CAT, Engine drag torque control (MSR), Parking brake, electric, Porsche Traction Management (PTM), Wheelbase 2807 mm, Tire repair kit, Rear seat back, split, Low emission according to emission standard Euro 6, Side airbags, front, Seat belts, black, Seat cover / upholstery: Alcantara / synthetic leather, Start/stop system, Universal audio interface, Mobile phone/cell phone preparation with Bluetooth interface